Channel assignment manual error.

Similar Questions

• Flex/Zend Channel Connect failed error...

  Hi guys.

  I use Flex and php to develop my project. Everything works fine on my local machine. However, when I upload my files on my server (godaddy.com). I got the error when loading my flex application.

  The popup error message is

  Send failed

  Channel.Connect.failed.Error

  Netconnection.call.Badversion: url:

  http://mydomail/folder/gateway.php

  I send my ZendFramewrok folder on my server and amf_config.ini has been set up. (webroot = ) http://mydomain )

  I don't know what is happening here. Help, please. Thank you.

  Update: my gateway.php

  <?php
  ini_set("display_errors", 1);
  $dir = dirname(__FILE__);
  $webroot = $_SERVER['DOCUMENT_ROOT'];
  $configfile = "$dir/amf_config.ini";
  
  //default zend install directory
  $zenddir = $webroot. '/ZendFramework/library'; //I did upload the ZendFramwork folder
  
  //Load ini file and locate zend directory
  if(file_exists($configfile)) {
   $arr=parse_ini_file($configfile,true);
   if(isset($arr['zend']['webroot'])){
    $webroot = $arr['zend']['webroot'];
    $zenddir = $webroot. '/ZendFramework/library';
   }
   if(isset($arr['zend']['zend_path'])){
    $zenddir = $arr['zend']['zend_path'];
   }
  }
  
  
  // Setup include path
   //add zend directory to include path
  set_include_path(get_include_path().PATH_SEPARATOR.$zenddir);
  // Initialize Zend Framework loader
  require_once 'Zend/Loader/Autoloader.php';
  Zend_Loader_Autoloader::getInstance();
  // Load configuration
  $default_config = new Zend_Config(array("production" => false), true);
  $default_config->merge(new Zend_Config_Ini($configfile, 'zendamf'));
  $default_config->setReadOnly();
  $amf = $default_config->amf;
  
  // Store configuration in the registry
  Zend_Registry::set("amf-config", $amf);
  // Initialize AMF Server
  $server = new Zend_Amf_Server();
  $server->setProduction($amf->production);
  if(isset($amf->directories)) {
   $dirs = $amf->directories->toArray();
   foreach($dirs as $dir) {
       // get the first character of the path. 
       // If it does not start with slash then it implies that the path is relative to webroot. Else it will be treated as absolute path
       $length = strlen($dir);
       $firstChar = $dir;
       if($length >= 1)
        $firstChar = $dir[0];
  
       if($firstChar != "/"){
        // if the directory is ./ path then we add the webroot only.
        if($dir == "./"){       
         $server->addDirectory($webroot);
        }else{
         $tempPath = $webroot . "/" . $dir;
      $server->addDirectory($tempPath);
     }     
    }else{
        $server->addDirectory($dir);      
    }
   }
  }
  // Initialize introspector for non-production
  if(!$amf->production) {
   $server->setClass('Zend_Amf_Adobe_Introspector', '', array("config" => $default_config, "server" => $server));
   $server->setClass('Zend_Amf_Adobe_DbInspector', '', array("config" => $default_config, "server" => $server));
  }
  // Handle request
  echo $server->handle();
  

  Error in gateway.php if I call him directly.

  WARNING: require_once(Zend/Loader/Autoloader.php) [function.require - once]: failed to open stream: no such file or directory in /home/content/79/4687979/html/parkerList/gateway.php on line 27

  Fatal error: require_once() [function.require]: Failed opening required 'Zend/Loader/Autoloader.php' (include_path ='.: / usr/local/php5/lib/php:http://blackwheels.info//ZendFramework/library"") in /home/content/79/4687979/html/parkerList/gateway.php on line 27

  Gateway.php is the rat. but I can't understand what is wrong. Zend/Loader/Autoloader.php is under the "ZendFramework/library" of server root folder. I don't understand why my application can't find it. Thanks again!

  Hello

  I had the same problem (I think). I have some sort of solution: not a very good, but at least it works (for me)...

  So, I put the ZendFramework directory in my application directory (this is why it is not a good solution...) and changed the layout of directories in amf_config.ini and gateway.php.

  (on my server: .../myFlexApp/ZendFramework)

  new file amf_config.ini:

  [zend]
  ; define the absolute path to the webroot directory, example:
  ; Windows: C:\apache\www
  ; MAC/UNIX: / user/apache/www
  Webroot =.

  ; define the absolute path to the zend installation directory, example:
  ; Windows: C:\apache\PHPFrameworks\ZendFramework\library
  ; MAC/UNIX: / user/apache/PHPFrameworks/ZendFramework/library
  zend_path = ./ZendFramework/library

  [zendamf]
  AMF.production = true
  AMF. Directories [] is. / services

  and at the beginning of the gateway.php file:

  ini_set ("display_errors", 1);
  $dir = '.';
  $webroot = $_SERVER ['DOCUMENT_ROOT'];
  $configfile = "amf_config.ini";

  By default zend installation directory
  $zenddir = $webroot. "/ ZendFramework/library";

  And for me it's OK.

  I will try to solve the problem in a more clean way later, with a repertoire ZendFramework separated from the application directory. Maybe someone else can help? With a few "echoes" in the gateway.php file, I was not able to understand what was wrong, I'm not familiar enough with the configuration of php.

  I hope this can help you!

• niHSDIO VI of dynamic channel assign

  It might be a silly question, but I am struggling to find the answer I'm looking for.  When using the niHSDIO assign dynamic channels VI with the PXI-6552, how to determine which channel is assigned to which pinout of the PXI?

  I call the VI as follows:

  

  I was able to stumble upon this article that shows the pinout diagram; However, it does not seem to correlate the VI channels to the PXI pins:

  

  Intuitively, I presume that the DIO pins corresponding channels and just go in ascending order, but I was wondering if someone could confirm this or point me in the right direction as to where I can identify this information.

  Of trial and error, I have deduced that my hypothesis is correct.

• LV 2016: LabVIEW could not create the required channel file permission error endpoint; NOR-488: Error of hardware detected DMA

  I just installed the new 2016 LabVIEW with the two patches and wanted to check the new feature.

  When you create a channel writer, there was a pop up select the Channel end point, but whatever the option chosen, there is a window saying "LabVIEW could not create the required channel endpoint", error ccode: 8 file authorization error

  NOR-488: Error detected DMA hardware.

  I have error permition from file to file, file that is?

  By chance, do you have re-defined the default data directory in LabVIEW?  LabVIEW uses to host files for the warp threads, and if you moved from its default position in your profile (C:\Users\\Documents\LabVIEW data), especially if you moved it to the root of C:, it could become unalterable.  This must remain in your profile!

  Bob Schor

• The potential resource assignment update error

  Hello
  I get the error by updating assignments resource of contingent using the Standard API below.
  

  ORA-20001: HR_7949_ASG_DIF_SYSTEM_TYPE: N, SYSTYPE, ACTIVE_CWK

  Update of the registration code is-
  

  Declare
   Cursor c_emp_mig 
  Is 
  Select person_id, supervisor_person_id, code_comb_id, sob,  assignment_id, assignment_number From  customContingentTable;
    x_person_id number;
   x_validate BOOLEAN := FALSE;
   x_supervisor_id number;
   x_default_code_comb_id number;
   x_set_of_books_id number;
   x_assignment_id number;
   x_assignment_number varchar2(20);
   x_manager_flag char(1):='N';
   x_comment_id number;
   x_concatenated_segments varchar2(80);
   x_no_managers_warning boolean ;
   x_cagr_concatenated_segments VARCHAR2(80);
   x_soft_coding_keyflex_id NUMBER; --- IN OUT
   x_other_manager_warning boolean;
   x_object_version_number NUMBER;
   x_cagr_grade_def_id  NUMBER;
   x_effective_date DATE :='01-OCT-2011'; --cut off date from which the assignment will be effective
   x_effective_start_date DATE  :='01-OCT-2011';--cut off date from which the assignment will be effective
   x_effective_end_date   DATE;
   x_hourly_salaried_warning boolean;
   x_org_now_no_manager_warning boolean;
   x_error_code varchar2(240);
   x_error_desc varchar2(2000);
   Begin
     Open c_emp_mig;
     Loop
     Fetch c_emp_mig Into x_person_id, x_supervisor_id, x_default_code_comb_id, x_set_of_books_id, x_assignment_id, x_assignment_number;
     Exit when c_emp_mig%NOTFOUND;
      x_object_version_number:=1;
      hr_assignment_api.update_cwk_asg(
       p_validate => x_validate
       ,p_effective_date => x_effective_date
       ,p_datetrack_update_mode => 'UPDATE'
       ,p_assignment_id => x_assignment_id
       ,p_assignment_status_type_id => 1
       ,p_assignment_number =>x_assignment_number 
       ,p_object_version_number => x_object_version_number
       ,p_default_code_comb_id => x_default_code_comb_id
       ,p_set_of_books_id => x_set_of_books_id
       ,p_supervisor_id=>x_supervisor_id
       ,p_manager_flag=>x_manager_flag
       ,p_concatenated_segments => x_concatenated_segments 
       ,p_soft_coding_keyflex_id => x_soft_coding_keyflex_id 
       ,p_comment_id => x_comment_id
       ,p_effective_start_date => x_effective_start_date 
       ,p_effective_end_date => x_effective_end_date
       ,p_no_managers_warning => x_no_managers_warning 
       ,p_other_manager_warning => x_other_manager_warning
       ,p_hourly_salaried_warning=>x_hourly_salaried_warning  
       ,p_org_now_no_manager_warning=>x_org_now_no_manager_warning
      );
        End Loop;
     Exception When Others Then
           x_error_code:=SQLCODE;
           x_error_desc:=SQLERRM;
          insert into emp_mig_error(error_code, error_desc) values(x_error_code, x_error_desc);   
       Close c_emp_mig;
    End;   

  Am I missing something here? I searched in metalink, there is no mention of this error. Can anyone help?
  
  Regds,
  ARS

  You can check what is the value of -.
  Select * from per_assignment_status_types
  where per_system_status = 'ACTIVE_CWK ';

  Make sure that you pass the correct value for
  p_assignment_status_type_id-online 1

  see you soon,
  VB

• Slate 6 manual error update of KitKat

  I downloaded the 4.4.2 update on the HP website, followed the instructions to copy it onto a SD card, etc and I tried to install it.

  I got the following error message:

  -Install /sdcard...
  Finding update package...
  Open the update package...
  Update
  ("WARNING: no file_contextsassert no impossible file_getprop("/vendor/carrier.prop","ro.product.name ") == dholka

  Abandoned facility.

  I retried several times and has even done a factory reset the phone and tried again, and each time had exactly the same message.

  Any ideas, anyone please?

  Hey @djg10 ,

  Welcome to the HP Forums!

  I understand you are having problems updating your 6 Slate tablets to KitKat.

  The update.zip files hosted on the site of HP are images of recovery not updates. These packages do not contain the boot loader update needed to run the operating system. Updates for your tablet are released OTA.

  How to check the updates of the system:

  You must be connected to the Internet to check for updates. Use the following steps to check updates on your Tablet System.

  1. on the home screen, tap the apps for everything, and then tap the settings icon.

  2. in the section on tablet PC touch system.

  Figure 1: on the tablet.

  

  3. press on the system updates.

  Figure 2: System updates.

  

  4. press on check now.

  Figure 3: Checking now.

  

  5 install the available system updates.

  Thank you!

• Assignment of error webutil

  Hello world
  while I have configured my webutil (especially when I attribute sign_webutil for frmwebutil.jar and jacob.jar)
  I got this message
  
  C:\ordv\forms\webutil > sign_webutil.bat C:\ordv\forms\java\frmwebutil.jar
  Generate a signature key certificate webutil2 = auto...
  keytool error: java.lang.Exception: pair not generated, alias < webutil2 > key alr
  Eady is
  .
  There are errors or warnings while generating a self signed certificate. Pleas
  e revisiting.
  .
  Backup of C:\ordv\forms\java\frmwebutil.jar as C:\ordv\forms\java\frmwebutil.ja
  r.old...
  1 file (s) copied.
  Using the signature key C:\ordv\forms\java\frmwebutil.jar = webutil2...
  'jarsigner' is not recognized as an internal or external command
  operable program or batch file.
  .
  There were warnings or errors while signing the jar. Please refer to them.
  and this message for the jacob.jar
  C:\ordv\forms\webutil > sign_webutil.bat C:\ordv\forms\webutil\jacob.jar
  Generate a signature key certificate webutil2 = auto...
  keytool error: java.lang.Exception: pair not generated, alias < webutil2 > key alr
  Eady is
  .
  There are errors or warnings while generating a self signed certificate. Pleas
  e revisiting.
  .
  Backup of C:\ordv\forms\webutil\jacob.jar as C:\ordv\forms\webutil\jacob.jar.ol
  d...
  1 file (s) copied.
  Using the signature key C:\ordv\forms\webutil\jacob.jar = webutil2...
  'jarsigner' is not recognized as an internal or external command
  operable program or batch file.
  .
  There were warnings or errors while signing the jar. Please refer to them.
  can gay u pls help me
  Thank you in advance

  Hello

  It's good that you did. And you're webutil is downloading.

  Please mark relatively useful/correct because other users will also be able to solve their problems.

  Sarah

• "No valid source or target channels specified. Cannot run. "error when you try to convert to digital channel waveform

  I'm trying to convert a waveform channel in one digital channel and a channel of absolute time, but I get the "no valid source or target channels specified. Error cannot run. ».

  I'm trying to concatenate several files TDMS InsightCM so I can display the data in a continuous flow over time. If the first file loaded (one of the channels in the group "Signals") convert the same channel, it works fine, but when I try to do the same thing with any of the channels from the second file (one of the channels in the group "Waveforms1"), I get the error.

  

  Hi JEBalles,

  I was able to reproduce this behavior when I chose a digital channel as my channels to convert. In this case, it looks like you run the operation on the speed profile > Mod1-Ch0 A NL, which is a digital channel.

  Could you try to select a waveform another channel? It looks like [3] Mod1-Ch0 A NL is a waveform channel.

  Kind regards

• Library meets live TV with the error: "there are currently no TV signal detected for this channel. The channel may be temporarily off the air. »

  I recently changed my TV card to an analogue of Hauppauge PVR150 at a Hauppauge DVB - S Nova S more. Media Center has worked well before.

  Media Library will recognize the new card, search and branch on 239 satellite channels, but may not display the channels giving the error message "there is currently no TV signal detected for this channel. The channel may be temporarily off the air. »

  I have installed WinTV 7 and that you can view all the channels very well in this program so obviously the map and the intensity of the signal are not the problem.

  In my quest through other forums, I heard problems re codec: mpeg2 and we tried several packs of codecs (including shark007) but with no improvement.

  My last move was to uninstall Media Center, uninstall all codec packs, uninstall the TV card and drivers, then reinstall the media library and the TV card and am still unable to view TV channels.

  Suggestions have greatly accepted.

  I've searched the Internet high and low for a solution to this problem and can lead to nothing more than what is proposed here by Divya.

  The problem seems to be fairly common and seems to be associated with codec. Most of the solutions I've come across related to the installation of media center alternatives and after several tries I finally opted for new version of Media Portal 1.1.0 beta

  Installed without a hitch and so far the interface is similar to the media library but has better customization and the ability to incorporate plug-ins.

  I did try the latest version (1.0.2) of the media portal, but said she had a few problems of stability (probably related to the W7 compatibility).

  Very happy now with Media Portal 1.1.0 Beta so will not need any other solution to this problem.

• Basic question about the selection of the AP and multiple channels

  I have about 10 PA (Aironet 1240 G) intended to be deployed one of my floors of office. We examined a diagram of the floor and made sure that we ordered enough to completely saturate the ground with wireless coverage. There are a few AP which are probably only 50' with each other. It's actually a bit exaggerated.

  I put a base on the switch configuration so that there are two different SSID on the access point (one for a production of WLAN and the other for a WLAN comments). Each SSID is associated with a VLAN different.

  I want to know is this what to do on the channels for the AP? Each access point will be independently configured and controlled.

  I understand that there is a way to control which channels each AP uses, but I'm not familiar with the controls or best practices for the configuration of the AP

  Can I do something like make sure that each access point uses a different channel than its nearest adjacent neighbors? Someone would mind sharing what is the command to do it, and where it is applied?

  I have read through some archives and saw people talk to set "no bunk channels" and to configure them to use 1,6,11 channels. I guess I don't understand what is meant by there.

  Manually define you an access point to channel 1, then set his neighbour to use 6 and another neighbor to use 11, and then you who stay?

  What is the worst of the scenarios on what happens when you have no AP too close to the other located on the same channel?

  It is a pleasure to read through the documentation if someone wouldn't mind pointing me to it. I'm still trying to understand the concept, and then I should be able to understand the documentation that came with the AP.

  Thank you for your help.

  If your stand-alone Access Points. If it was a deployment of Comptrollership, in fact to dynamically manage the channels for you.

  But what you really want to do, is you see APs do something like this:

  (imagine each number represents an access point, and it channel)

  1 6 11 1

  6 11 1 6

  11 1 6 11

  1 6 11 1

  It is a conceerne configuration guide. I think he has a small section on the channel assignment. If you do this manually, I think that you specify the actual frequency used in the CLI instead of the channel number.

  http://www.Cisco.com/en/us/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43rf.html

  So the CLI under the Dot11Radio0 you would do something like 'channel 2412' for channel 1... 2437 for 6, 2462

  for 11...

  If you have APs side by side on the same channel, you are likely to have clients interfere between them.

• WiFi access limited, error: "the default gateway is not available.

  I just bought a laptop Windows 8 last December. It had been repaired twice (change the motherboard). He works all fine until last week, wifi connectivity started showing limited access. Furthermore, my IPV6 shows no access. I tried many solutions to many websites, but all will not work. Is there another way? When I trobleshoot the problem, it will show wifi Internet but when I run Google Chrome, it displays an error of internet connection. After I trobleshoot, the stated problem is "the default gateway is not available. In addition, he recovers in about 5 minutes after trobleshooting access. I need a solution as soon as possible. URGENT!  In addition, may I know what caused this do? I hope some of you can help. :(

  Dell Inspiron 7420, unique language of Windows 8

  Hi Amos,.

  I understand that your WiFi connection fails.
  According to the guidelines of the error (the default gateway is not available), there is a problem with the gateway IP address that does not connect to the internet.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer (installation of updates, device drivers)?

  2. which antivirus app do you use?

  What are the troubleshooting steps you have tried?

  Here are a few troubleshooting steps that you can try to solve this problem.

   

  Method 1: Manually assign the IP address and the default gateway and check if it works very well. Before you assign manually the IP address and the gateway by default, do
  a note of the IP address of the computer. To do this open command prompt, type ipconfig and press to enter. This displays the IP address, make a note of it.

  To manually assign the IP address and default gateway, follow these steps:
  a. in the system, right click on network icon tray. Choose the open network and sharing.

  b. click on change adapter settings

  c. right-click on the card's wireless connection and click on properties.

  d. Double click on Internet Version 4 (TCP/IPv4) Protocol and assign the IP address manually.
  Example: Old Ip address is 192.168.0.1
  Replace the IP 192.168.0.50
  e. leave the subnet mask and default gateway are the same.
  Subnet mask = 255.255.255.0
  Gateway by default, would usually 192.168.0.1 or 192.168.1.1
  f. click apply then click Ok and restart the computer and check if it helps to solve the problem.

  If the method above does not work, proceed to the next method.

  Method 2: I suggest you try the steps from the link given below:
  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  
  

  If you have additional problems, please reply to this post and we will be happy to help you further.

• An error occurred while setting up the HA Agent on the host

  Hi people,

  We got our data center moved to a new location. I simply started the ESX and vCenter servers. When I connected the VI vCenter client I get error HA agent on all nodes of ESX. This Setup worked very well in our old data center. No configuration changes, which we did. vCenter and ESX servers are on the same subnet only so no problem connectivity or firewall, I guess. vCenter is installed on the physical server. For your information, our VMkernel network is in a different subnet and I guess VMkernel has nothing to do with the HA HA works with Network Service Console.

  I tried the following thing to solve the problem, but nothing helped.

  1. Reconfigure the node affected for VMware HA
     
  2. Disabled and enabled VMware HA cluster level
     
  3. Unplug and replugged affected node in the cluster
     
  4. Remove affected ESX node in the cluster. Delete Virtual Center agents and HA from the node assigned manually and re - add the node to the cluster
     
  5. Check name resolution between the nodes in the cluster and Virtual Center
     

  VMware ESX 3.0.2 version details

  Any help would be really appreciated...

  Thank you

  Hari.

  DNS correct?

  Can you ping the gateway?

• Satellite C670D-115 - need to manually change the graphics memory

  All just bad bios of satellite C670D-115 good Notebook

  New bios? I need a memory of you GFX lucky me self
  I have 6 GB of DDR3 and my GFX only 386 mb
  I have install (amd_system_monitor) and max memory that I use is 386 mb not more in the game which is bad
  so the question is can not do you a new bios that give me allows you to use more memory than 386 mb

  a game of "s".

  Laptop: Cod Modern Warfare 2
  http://www.YouTube.com/watch?v=uavRKzKghBQ

  Laptop: F1 2011
  http://www.YouTube.com/watch?v=j55wkDF1QeI

  Laptop computer: Pc Game Hawx
  http://www.YouTube.com/watch?v=AoCyaPr_skM

  Hello

  As I know the laptop is equipped with the AMD Radeon HD 6250 graphics card.
  Here, you could find nice description of this GPU:
  http://www.notebookcheck.NET/AMD-Radeon-HD-6250.40958.0.html

  But back to the main issue: shared graphics card memory is controlled by the graphics driver and everything works automatically and this means that the shared memory can be assigned manually :(

  Welcome them

• configurations of 2 channels with MCE

  I wish I had 2 configurations of channels with MCE. One antenna, the other with satelite. Is it possible to save different configurations and switch from one to another easily?

  Hello

  I hope I got what you want. :)

  AFAIK if you are using a standard antenna you should scan all channels and all available recorded under different program numbers. The use of satellite antenna, you will have to find that a single channel because the channels must be modified on the sat receiver.

  You can first connect the antenna and scan all available channels. After that, choose an empty channel and manually configure for sat receiver. Login feature, you can choose and watch your channels. On this way, you can also configure the VHS recorder.

  Good bye

• Diagnosis of error 65548 overcurrent or overvoltage.

  Hi all

  I have a question about the error detection against overcurrent/overvoltage of the digital output NI 9476 module.

  If I understand correctly, if you use the module mode Scan Interface, only an error specific to the module 65548 is supported, and it is not possible to determine which channel the error is on. This means that none of the channels will be controllable because attempts to write to any of the I/O module variables will cause an error? Also, is it possible to debug what channel is defective (e.g.using Distributed System Manager, tests each channel switch at a time) without having to resort to the FPGA interface mode?

  Thank you

  Dimitris

  Hi Dimitris,

  I think that you are correct that in Scan mode, this error means that him you cannot write on one of the channels and unforunately there is no way to debug what channel caused the error without going into FPGAS or tests of each channel individually. Please see this forum post for control channels using FPGAS.

  http://forums.NI.com/T5/Digital-I-O/digital-I-O-Board-9478-error-code-65548-overcurrent-report-by/m-...

  Hope this helps,

  Tom

  AE, NIUK