Check box properties-change/stay red when checked

Similar Questions

• Is it possible to change the Red to black when you use drawing annotations?

  Drawing annotations are all red when I try circling a text. Is it possible to change the color to black?

  You can right click on a line and select Properties. You can usually get a Properties menu by using ctrl-E.

• Where is the setting to change to show when you lock shift or stopped

  Original title: caps lock display

  where is the setting to change to show when you lock shift or stopped

  Hello wgkg,

  It should be in the keyboard properties.

  1. open the control panel

  2. click on the keyboard icon

  3. in the keyboard properties, click on settings in the key

  4. scroll to the option of caps lock and highlight it.

  5. click on the button Configure (below the list of available keys options menu)

  6. in the caps lock set up a window, place a nect check mark (tick) for the "show state lock shift on the screen..." and then press the Finish button.

  You will see only the option above, if you have installed the relevant keyboard/mouse drivers. If you don't see these options, that is, the options key parameters, check with the manufacturer of your keyboard, see that you have the correct drivers and 'no' the standard Microsoft drivers generic like the one provided with windows.

  If her you've seen before a prompt on the screen for you say that the cover lock is enabled or disabled, but you don't see it now you probably disabled the option at some point in the past.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• The text color changes to black when I turn on a light - why?

  I did a demo of AE text various layers in a simple 3D space for I can have the camera press text layer, then turn/spin to another, etc. Kind of a cliché, I know.

  Anyway, everything worked fine with the camera, the background, text layers suspended in space at different angles, etc. I selected the text in each text layer and changed the color from black to red. But when I added a spot light, the text was black once again, not red. Regardless of how I moved the autour spot, I could not get the text layer to stay red. I know there is a reason for this, but I don't know what it is, or how to achieve the effect I want. Thanks in advance!

  The reason is that the light does not shine on the text.

  Three solutions:

  1 direct the light to the text

  2. Add a new light and shine on the text

  3. twirl in the properties of the text layer and set it on not affected by the fires of the model.

• I have windows 7 and that you have not knowingly changed parameters. When I try to download something or play sims # I get a message that says your internet security setting preventing one or more files being opened.

  I have windows 7 and that you have not knowingly changed parameters. When I try to download something or play sims # I get a message that says your internet security setting preventing one or more files being opened.

  Hi facions.

  What browser do you use?

  If you use Internet Explorer, you can optimize Internet Explorer and check if the problem persists. For more information, follow this link: How to optimize Internet Explorer

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Media Center remote with pace DC50X 1039, Setup box cannot change channel

  Can I use Vista Media Center to record only TV etc...
  Recently I had to use a configuration of Comcast Digital adapter carrier (DC50X) in order to get access to the channels.

  Vista recognize the Remote Setup Box, but it is not able to change the channels of the Remote Microsoft.

  On this page: http://mythtv.org/wiki/MCE_Remote I have the 3rd remote from left to right.

  I contacted PACE (the author of the configuration box) with the following response:
  ". The DC - 50 X uses a new remote protocol called XMP. Check to see if it can emit IR codes using the XMP Protocol.
  "If you use Microsoft remote issue codes using the XMP Protocol, it will not work with the DC 50 x"

  Anyone know if Microsoft Remote is able to use the XMP?

  Someone knows how the Media Center as the configuration box to change the channel?
  It looks like, it uses IR (due to the extra step of IR with the configuration box).

  If you have a WMC working with the DC50X, what is your Setup, what version of the distance, whats is your hardware configuration?

  My tuner (Hauppauge WinTV-PVR-500) can see the image, the sound is fine.

  Any help would be much appreciated.

  Deckard6, please see the Microsoft Hardware site:
  http://www.Microsoft.com/hardware/default.aspx

  Also try:
  Remote control for Media Center PC with Windows

  We can help you with Vista related components, if you feel that your Media Center software configuration is at fault for what you are experiencing, then we can try wrong turn, however, if it is indeed the remote transmitting Protocol, then it is not in our support framework. Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How I changed the color of something? OK, so I use to be able to change the color of things, but now I have use color overlay, gradient overlay, or change the color when I first create the form, it turns into another shade of gray instead of chan

  How I changed the color of something? OK, so I use to be able to change the color of things, but now I have use color overlay, gradient overlay, or change the color when I first create the form, it turns into another shade of gray instead of change the color, I chose.

  Three things I can think of:

  Your document must be in RGB mode.

  Layer blending mode should be set to Normal

  Masks are grayscale. If you select the mask, you cannot apply a color.

  Always check your tab at the top to see if what you choose is RGB or grayscale.

  Gene

• color change of tank when the entry of a simulink crosses the threshold

  Hi all

  I want to change the color of the indicator of tank in labview from green to red when the input in simulink signal crosses a threshold. In fact I'm integrating simulink and a labview using connection OR SIT.

  Thank you

  Muhammad Abul Hasan

  
  

• VBA Project Password dialog box indicated after closing Excel when Acrobat PDFMaker COM Addin is sound

  VBA Project Password dialog box shown after closing Excel when Acrobat PDFMaker COM Addin is enabled

  I have developed many applications in different environments (ASP, SQL, VBA, VB, etc.) of the past 20 years. Recently I've had reports about a bug that I believe that the derivative of a com add-in called "Acrobat PDFMaker Office COM Addin" (PDFMaker.OfficeAddin) developed by Adobe.

  The application that generates the problem rests in Excel. There a Userform with a ListBox in it. The position of the listbox is different depending on several parameters and is changed programmatically. However, whenever the UserForm has proved and the user closes the file of the VBA project password dialog box appears. The pop up password must be cancelled 2 - 5 times before it disappears.

  The problem of course is very annoying and difficult to explain to the customers who paid me for the solution. I spent a lot of time trying to solve the problem, but with little success.

  Recently, I read in a forum that it was caused by the Acrobat PDFMaker COM Addin. I couldn't believe it, but when I disabled the add-in everything works correctly. In addition, in machines that does not add-in installed there is no problems reported.

  pens-after-closing-the-Excel-workbook http://www.excelguru.ca/forums/showthread.php?1009-quot-VBA-Project-Password-quot-Window-o

  How to reproduce the BUG (5 minutes) (Courtesy Randall):

  To reproduce this bug anyone can just create a new workbook for MacroEnabled, 1) adds a UserForm with a close button, 2) protect the VBProject code (this is essential), 3) add code to load or. View the UserForm in the WB or Activate open procedure, 4) add Userform code change of ownership (for example. High =. Left =. (Caption =) in the Userform Init procedure (this is essential), 5) save and close the workbook. (6) revive the workbook by ensuring that the UserForm is opened and then close it via the button you have provided on the UserForm. (7) exit the WB via the file Menu option - leave (this is essential). Wait, wait what he (about 5 seconds) :-) invited password VBProject to appear, repeatable.

  As a solution, I tried to disable the add-in at startup, but the line Application. ComAddIns("PDFMaker.OfficeAddin ") . Connect = False

  will throw an error "This add-in is installed for all users on this computer and may only be connected or disconnected by an administrator."

  I read in some forum that the issue occurs if the ActiveX DLL does not correctly release the reference to the workbook that contains the VBA project protected by password (http://support.microsoft.com/kb/280454)

  Any help to solve the problem or find a workaround is very appreciated.

  Niklas

  Hi Niklas,

  The above question has been saved as a Bug and has been corrected in Acrobat 11.0.1 update.

• Multiple selection works only not on the list box properties/Option screen

  When I select a multiple selection in the list box properties/Options tab, I get no difference from the default value of single selection. Still, he points out that the last of multiple entries (as a single room) and displays only the last entry. Is there anything else I need to do?

  Thanks for your help.

  To select multiple items, hold the CTRL key when you click additional items.

• Change the image when the drop-down list value form is selected

  I really thought that it would be easier but I can't function.

  I have a consignment of Paypal with a drop-down list. The list to select the color. I want to change an image on the page to display the correct color when the color is selected in the drop-down list. So a black image occurs when black is selected, a red when red - etc...

  I would be very grateful if anyone can share some brief, the browser compatible code. Thank you for any assistance you can provide.

  Bill

  You are right that this is not as simple as you might think at first.  You asked for succinct, but there are several steps involved in mode Code (horror!)

  1) first add this script just before the closing tag () on your page head and then insert all your path/imagenames where see you mine.  Notice of the ORDER OF THE IMAGES must match the order of your choice to be called with the list of drop-down selection in your form! :

  2) in second place, in your form, add the below onchange event for thetag.  Note that in this example, the ID on the we will work with the tag is "theImg", change that, as needed.  If youdo not already own one identifying the tag (see further below), just use "theImg".

  So here's a form with a select field.  Use whatever values you need to do this, just add my onchange event as shown:

  
    <>name = "productColors" id = "productColors" onchange = "diva_imgBySel ('theImg', this.selectedIndex)"> "
      XX
      YY
      ZZ
   
   
  

  3) Finally, you can click on thetag, then click on the Tag/behavior window, click sound + plus sign and select "Preload Images" and adds all imagenames so they will appear more quickly when the selection list is used.

  Hope that all of the senses.

  -- 
  
  E. Michael Brandt
  
  www.divahtml.comwww.divahtml.com/products/scripts_dreamweaver_extensions.phpStandards-compliant scripts and Dreamweaver Extensions
  
  www.valleywebdesigns.com/vwd_Vdw.aspJustSo PictureWindowJustSo PhotoAlbum, et alia
  
  --
  

• file .avi and .mov on iMac changed in .m4v when they are copied to the external hard drive. I will be able to open these files on other devices like a Windows PC?

  file .avi and .mov on iMac changed in .m4v when they are copied to the external hard drive. I will be able to open these files on other devices like a Windows PC?

  FWIW, do not change the extensions of file simply by copying the files to an external drive.

• How can I change my country when I have a balance that I can't buy anything with? It will not change me cause I have a balance of 0.07 pence

  How can I change my country when I have a balance that I can't buy anything with? It will not change me cause I have a balance of 0.07 pence

  Click here and ask the staff of the iTunes Store to zero the balance of your account.

  
  (142584)

• How can I do to change the site when I open a new tab.

  Dear friends...
  I can't find information, how to change the site when I opened a second tab. Example: when I open Firefox my google home page and it's perfect, but when I opened a second tab, appears why yahoo as homepage? I want to change it and I can not find how do. Thank you

  The normal behavior is to open a blank tab, an add-on will be originally to show Yahoo. An add-on which has net gel assistant, if you have one you can uninstall it and it should go back to the opening of a blank tab.

  There are modules that allow you to specify what should open in a new tab, such as:

  • NewTabURL - https://addons.mozilla.org/firefox/addon/newtaburl
  • New tab Homepage - https://addons.mozilla.org/firefox/addon/new-tab-homepage

  Another way to open the home page in a new tab is in the Middle, click the home button in the navigation toolbar.

• I haven't used itunes for some time and now have a new PC.  I've updated my account (change password) but when I connect to my music went?

  I haven't used itunes for some time and now have a new PC.  I've updated my account (change password) but when I connect to my music went?  I am working on Win 8 and still have part of my collection on an ipod.

  Unless you subscribe to iTunes game (which is not a complete solution anyway) your iTunes Library is on your previous PC - solution the easiest is to copy from here or from a backup.  For more information, see How to move your iTunes library to a new computer - Apple Support .  Previous purchases from the iTunes Store may be available for re - download - see download your past - purchases of Apple Support.

  If none of these approaches allows to recover the contents of your library, see user turingtest2 on recover your iTunes from your iPod or an iOS device library for a list of tools and methods that can be used to copy the media etc from iPod to iTunes.