Multiple selection works only not on the list box properties/Option screen

Similar Questions

• Multiple selection works only not active based on

  Hello

  I tried to create an asset base with a multiple selection, but it strives to 7.6, but not in 11g. Not able to select multiple values from the drop down.

  The default tag is not is also reflected. Here is the code I use.

  < NAME of ASSET = 'Changes' DESCRIPTION = 'Changes' MARKERTEXT = "' * ' PROCESSOR ="5.0"DEFDIR =" / apps/shared/storage/ChangeSet_Test1 ' RENDERUSINGTEMPLATE = 'no' > "

  PROPERTIES of <>

  < PROPERTY NAME = "AssetTypes" DESCRIPTION = "AssetTypes" >

  < STORAGE TYPE = "VARCHAR" LENGTH = "30" / >

  < TYPE INPUTFORM = "SELECT" MULTIPLE= 'YES' SOURCETYPE = "STRING" VALUES = "Left, Right and Center" DEFAULT= "" OPTIONDESCRIPTIONS = "Left, centered, right" / > "

  < SEARCHFORM DESCRIPTION = "AssetTypes updated / created" TYPE = "SELECT" SOURCETYPE = "STRING" VALUES = "Left, Right and Center" OPTIONDESCRIPTIONS = "Left, centered, right" / >

  < / PROPERTY >

  < / PROPERTIES >

  < / ASSETS >

  Concerning

  Bishnu

  Hello BishnuSatpathy,

  This is a known bug prior 11.1.1.8 patch 4.

  For more information, please see note 1587776.1

  I suggest that you upgrade your version to 11.1.1.8 patch 5 to solve this problem, or you can also try the workaround mentioned in the note

  1 - Open the [PATH_TO_SHARED_FOLDER]/elements/OpenMarket/AssetMaker/BuildEditSelect.xml file

  2. remove the dojoType = "the attribute fw.dijit.UISimpleSelect" lines 67 and 115 "

  3 - restart the application.

  4. multiple items can be selected after you make this change.

  BTW, do not forget to add SIZE = "4" in the INPUTFORM, otherwise you get a narrow selection box.

  Concerning

  David

• "Messenger Service, or the Net send command not working only not on the service remote computerhe.

  Messenger Service, or the Net send command not working only not on the remote computer, despite the messenger service is started "it works only if I restart the service.
  operating system is windows xp
  service pack 3

  Hi Charbel,

  Have you done a recent software or hardware changes to the system?

  This problem occurs because the Messenger service is disabled. The Messenger service must run on the destination computer to activate the NET SEND command.

  Because the service is already started, and you must restart the service, you can try to stop the service, change the startup type to automatic and start the service. Check if it helps.

  Please refer to the article to define the service as automatic:

  Programs or services that use the alerts service or the Messenger service do not work as expected after you install Windows XP Service Pack 2

  For more information, see the article:

  The NET SEND command may not work correctly on a computer that is running Windows XP Service Pack 2

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• My selection tool does not display the transformation box?

  I don't know what I did but my selection tool does not display the box of the scale (free transform). I have to continue to use the shortcut of 'e' and it's really annoying advice on how to fix it?

  Thank you!!

  I figured it shift + command + b

  thaks fixes everything!

• ListView - multiple selection works only for StandardListItem

  Hello

  In the meantime, this ListView object are less contraingnant to use; I modified my UI to work as an example of application of Battambang.

  But I have another question

  I use a GridListLayout (such as sample app stamp collector) and my ListItem is a container custom instead of StandardListItem.

  Unfortunately multiselect Manager works only with StandardListItem

  In my case, the context menu is empty!

  RIM is able to provide a sample of collector of stamps with GridListLayout? and multi select Manager / work context menu? and to highlight the points of stamps feature works in multi selection mode?

  Nicolas

  Indeed, the DeleteActionItem is not visible all in Multi Mode. I also tested is not serious if it is set with GridListLayout or not and even deleteAction.enabled of adjustment.

  I have raised a question of public affairs to do this, https://www.blackberry.com/jira/browse/BBTEN-173 so, please vote for it when you get a chance.

  See you soon,.

• Remote control not working only not with the G10

  Hello
  my remote was working initially. now it does not work in Qosmioplayer or WinMCE mode. The red light in the receiver when you press the remote control in order to do not a dead battery! any suggestions as to what was popular up

  Hello

  Have you installed any other tools or utilities, or have you changed a few settings?
  As far as I know you need the infrared receiver only to control the MCE Win.
  The receiver is plugged into the USB port. Please check in Device Manager if the receiver is recognized. Also, check the cable of the infrared transmitter is also related.
  However, if you are working with the Qosmio player receiver should be removed from the unit.

  Moreover, in the user manual, you can find useful information about the remote control

  Best regards

• Screensaver not working only not with the hot corner

  I used to have my screensaver set to start with the upper left corner of my screen using the feature 'hot corner '.

  However, lately, he doesn't. I tested it with all the other corners, and it does not work.

  I tried other functions with the hot corners and they all work very well. This is just the screensaver that does not work.

  I can set the timer and lights up the screen saver, but not with the hot corner.

  Someone can help me with this, or have any suggestions?

  See you soon!

  Hello Kaijuman,

  Thank you for using communities of Apple Support.

  I understand that when you try to start the screen saver by using Active corners it is not. I would like you to test this behavior then starts in safe mode, and then try another user account on your Mac.

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any key during startup

  How to test with another user account

  You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  Create a test user account

  1. In the Apple menu, choose System Preferences.
  2. Click the users and groups in the System Preferences window.
  3. Click the lock icon and enter an administrator name and password.
  4. Click on the button Add (+) below the list of users.
  5. Choose a type of user in the new pop-up menu.
  6. Give the user a name and first name, account name, and password.
  7. Click OK.
  8. Close the System Preferences window.

  Connect to the test user account

  Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

  Try to reproduce the problem

  Please let us know what the outcome is so we can help you.

  See you soon.

• Multimedia keys not working only not on the Satellite A200 - 14 d

  Hello!

  I have problem with my multimedia keys. They don't work after installing WXP and all drivers. Only key work is WWW browser. I wanted to put DVD/CD key to start winamp, but it is impossible. I can put this control controls and panel\Toshiba, but it still doesn't work. Also in the case of default CD/DVD settings key does nothing.

  I tried also to play, stop, next and prev keys in winamp hotkeys (options\preferences\global hotkeys winamp), but I can put only 1 key. When I am pressing the play button in the shortcut field keyboard winamp, it says "0 x 1770001", but after I save it turns into '0 x 1000000 '. Also when I am pressing the Stop button, it says 'E', and after save it also evolves into '0 x 1000000 '. And analog: prev button - '0 x 1740001', by pressing the next key - ""(only space), but after save this settings it also evolves into '0 x 1000000'. "."

  So only the first shortcut key works - for all the multimedia keys. Can you give me some tips to solve this problem?
  PS. [Sorry for my English:]

  Hello

  All the multimedia keys are designed to work with Microsoft Media Player and not for use with other media players. Install a few plugins for Winamp. Please see this section on Winamp on Toshiba laptops.

  Good bye

• F2 and F3 brightness keys not working only not on the DM4-3050US laptop

  I have a Pavilion DM4-3050US laptop.  The brightness keys don't work at all.  All the other function keys work fine, like F9 and F10 to volume.  I looked long and seriously and tried almost all of the solutions that I found, which it which seemed so promising: http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Brightness-Controls-Stopped-Working-dm4/m-p/....  Nothing works, however.  I won't do a factory reset - no need to reinstall all the software for the brightness.  I also called HP and they offered replace the laptop, but still once, does not only apply to worsening brightness keys.  Does anyone have any ideas or suggestions?  It must be some sort of bug that HP is aware, no?

  Then work my F2 and F3 keys.   They began to apply when I have connected a Microsoft Comfort Curve keyboard to my laptop.  This prompted Win 7/MS update find software for the keyboard that I downloaded and installed.  After the reboot, I discovered that the F2 and F3 keys now dim and brighten up the screen.  I know that this will not work for others, it seems to be related to the installation of the keyboard software, but he has restored somehow keyboard settings that work even if I'm not using the external keyboard.

• microphones not working only not on the dv6751us Pavilion

  After a clean install of Windows 7 Professional (previously had Vista) on my Pavilion dv6751us, the built-in microphones do not work anymore.  I checked Device Manager and no microphone does appear in the list.  Connect an external mike on the plug works fine and I can play music etc, so the sound card seems in good condition.  Any help is appreciated.

  You are the very welcome, Fred.

  Try the new driver Vista support for your laptop and driver, page and see if it works.

  Paul

• ReadyBoost Windows 7 Pro 64 bit works only not with the reader flash 32 GB USB high speed...

  Hello

  I did what I could find in support.microsoft.com search/read them all using ReadyBoost on my Windows 7 Professional 64 - bit, because he seemed much more cost-effective to install a properly sized USB key from the bombings of hundreds of dollars to replace and modernize the planks of installed RAM, I, 4x2Gb @ 1066

  My basic material is:

  Intel i7 920 CPU using Gigabyte EX58 - UD3R-MOBO with 8 GB of RAM installed 1066.

  According to the info I've read ReadyBoost, the ratio is 4:1 for the size of the Flash drive compared to installed RAM or, in my case, a 32 GB USB device.

  I had the OCZ Rally2 32 GB because it tested faster about 30 GB Read and 5 to 10 MB write.

  When I go to activate the USB 32 GB for ReadyBoost flash drive, I get the "impossible... to use this device to ReadyBoost...". "error message.

  TWO QUESTIONS:

  1 knowing that my USB 32 GB current is at a speed of 31 GB read/6-10 MB write and can be replaced if necessary:

  a. y at - it a necessary range of recommended read/write speed?

  2. further, saying: the range of tested USB disk read/write speed are correct or I will get a correct drive 32 GB and with 8 GB of RAM currently installed.

  b is it? or what is the advantage in any computer processing speed using a 32 Gb USB flash drive when it is 8 GB of RAM installed (knowing that a replacement/upgrade RAM is off-budget for the foreseeable future)?

  Finally, I pass first OCZ support but received no conclusive answers.

  1st answer to yesterday 20:11

  Win7 is limited to 32 GB size by device for ReadyBoost. I've seen this problem before when the USB key is at the maximum limit. Never seen a work around so.

  AND, more interesting for me, 2nd answer:
  Today 02:37

  Few people I know with this problem that I've never heard of a solution. I don't know anyone who devoted a lot of effort as with 8 GB of memory system is not a necessity for ReadyBoost so they just moved.

  NOTE: The support guess I are underutilizing the 8 GB of RAM installed. In fact, due to the needs work I will typically have anywhere for applications and utilities operating at 20-35 someone time, using 4-6 GB of RAM at peak use.
  Ideas?  Suggestions?
  Thank you.
  John

  Hi John,.

  A flash drive may appear to meet the requirements, but Windows may detects it not as compatible ReadyBoost if its rated speed measures sequential and random performance and performance is not always quick on the set of the flash player.

  Look for a note from the manufacturer that the flash player is Compatible Windows ReadyBoost. Not all manufacturers of this list on their packaging.

  You can check with another flash drive

  Answering your questions

  a. speed for Windows ReadyBoost requirements are at least 2.5 MB per second throughput for random readings of 4 kilobytes (KB) and 1.75 MB per second throughput for 512 k random entries.

  Using memory in your storage device to speed up your computer

  (Article is for Windows 7)

  b. ReadyBoost acts as a cache of HARD disc (hard drive) and is not a replacement for direct system memory. It will not improve processing speed, but will help the launch of faster applications and push background applications that serve much in memory reserved ReadyBoost.

  For more information, please visit the links below

  Turn ReadyBoost on or off for a storage device

  Using memory in your storage device to speed up your computer

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  ---------------------------------------------------------------------------------------------------------

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Mouse and keyboard not working only not with the ERD in Windows 7 and Windows 7 install disc

  I have a Dell XPS 8700.  I just did an upgrade to an SSD.  The DSS started once with no problems, then it wouldn't start.  I get an error message 1 MBR.

  If I do a F12, I am able to boot from the SSD drive and everything works fine, but if any process requires a reboot it will not work.  IE, windows update that requires a restart does not update because it cannot restart.

  To fix the MBR, use either the repair or install disk to get to the command line.  I have two drives and when I boot with them I get the initial screen of language/keyboard and mouse and keyboard do not work.  I have the keyboard and mouse installed in USB 2.0 ports, their was also in 3.0 ports with the same results.  They work fine until the disc over to install the files, and then they die.  I tried 2 different sets of keyboards and mice with the same results.

  I also tried to use the Dell recovery disk and it did find and supposed to solve a problem when I ran in the beginning.  But I still get the MBR error.  The disc is represented and it did not find any problems and I wanted to reinstall windows back to the factory.

  Suggestions as to how to get my mouse and keyboard work again with the repair and install discs would be greatly appreciated.

  Hi Navneet,

  Thank you for responding.

  Did you change the computer other than the upgrade to an SSD?

  Yes, I have, but that was before the SSD.  I upgraded the video card and added a 1 TB of HARD drive data.

  What is the complete error message you get on the MBR?

  The message reads as follows;

  "MBR 1 error.  Press any key to boot from floppy. »

  There is no floppy drive installed and I even tried to start with only the connected SSD.

  Are you an error code?

  No error code.

  As for changing the BIOS, I am not satisfied with messing with the BIOS, if this isn't an option.

  After thinking about this problem, I think that Dell has disabled somehow able to use disc repair/install "Windows".  I say this because they have disabled the ability to create a disk to repair Windows out of the Dell system and cannot create a Dell recovery disk.  Also because Dell has changed the MBR it wouldn't do any good to reset the MBR to the default value of Windows and the Dell recovery disk does not give you the ability to recover the MBR manually only.

  I decided that the best option was to do a clean reinstall of the OS, and that's what I did.  Everything works great for now.   It is a PITA, but nothing that I have not done before.

  Thanks again for your help...

  Mahalo,

  DEX...

• Function of ' play to ' Media Player works only not with the music on external drive

  Hi, I have not been able to "play to" music files stored on my Seagate external drive to a receiver AV Pioneer... "Play"works very well with the stored music files on my drive c of the laptop. Music on my external hard drive will appear in my library. Have laptop Windows 7 with Media Player... any help appreciated... .thanks

  Hello

  Do you have any application installed on the computer security?

  Method 1:

  If you do, I suggest you to disable anti-virus and check if it solved the problem.

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the step is not enough, then you can go to the method 2:

  Method 2:

  I suggest you go through the steps and check.

  a. closed Windows Media Player12.

  b. Access Services [table-> system and security-> administration-> Services tools]

  c. find the service named "Windows Media Player Network Sharing Service"

  d. stop the Service manually.

  e. Locate the "UpnP device host"service. Stop the service and restart it.

  f. run "Windows Media Player Network Sharing Service" now.

  g. close windows all associated and the Panel. Open Windows Media Player, right click on a playlist and see if the Play option lists the TV. Try to play now.

  Hope this helps and keep us posted.

• validation of single key works only not with the update

  Hi all

  I use jdeveloper 12 c on windows internet explore.

  I'm at the following link

  http://www.gabrielsideras.com/2010/09/28/ADF-unique-key-validation/

  It works only if I insert new records. After the update, it does not work. He leaves me no update.

  How to work around it please?

  Kind regards.

  User, tell us your exact jdev version, please!

  It works if yo udefine the unique key in the DB?

  Timo

• Gallery of Photoshop filters work only not with the "Unable to complete the operation" error box for PS CS6, CC, CC14, CC15 in Yosemite Mac, is produced in the Chinese version

  Hi all

  All Photoshop CS6, CC, CC14 CC15 have been updated in the latest version today. But the latest patch still does not fix the bug.

  Photoshop (Chinese simplified and Chinese traditional), just goes to show error message "Could not complete the operation" every time I click on a gallery of filters option. The issue started happening Mac Yosemite 10.10.2. No question too with the Mac version before 10.10.2.

  Version on Windows, it is normal, not this issue. I also tried using another language version of Photoshop, like English, it is normal without any problems. I also asked my Korean friend to use the software in Korean, no question too with Gallery of filters. But when I changed the language in traditional Chinese or simplified Chinese, the Gallery of filters will suddenly be not work with error "Can not complete the operation". When I change Photoshop to the other language, it will run normally.

  
  

  Here is the screenshot to understand clearly what I mean. It is not gray, it is not an accident. No crash no report at all. It simply doesn't get it.
  

  

  

  

  The problem occurs in ANY kind of file, it is not the specific problem of files.

  Remove the preferences, running file at startup, new account admin, uninstaller + Running cleaning tool + reinstall again, everything that I have tried and it solve anything. Therefore, it is not the machine question or account number. It also happens to other Mac Yosemite as well. In the past, there was no question too (before 10.10.2).

  In the internet (the Chinese language forums), there are many users who are also reports on the same subject, but still no solution so far.

  
  

  Below link, there is also another Chinese user who reported the same issue, but no response (I think because there is no problem in the English version, so that the staff of Adobe don't know what exactly, we face to)
  

  PHOTOSHOP CC 2014 - Chinese version traditional to the function of filter Gallery, unable to work on MAC OSX 10.10.2

  It is without doubt a BUG!

  
  

  I don't know the reason to find Mac Yosemite or because of defects in Photoshop. However, please solve the problem as soon as POSSIBLE because not all customers can understand English, especially us who comes from countries whose inhabitants do not speak English.

  * Sorry for the bad English, I spent hours just to write this post

  Hi all

  There is a patch to update to solve this problem

  http://blogs.Adobe.com/Crawlspace/2015/08/Photoshop-CC-2015-0-1-update-now-available.html

  I installed the update patch, and the problem is fixed in Photoshop CC2015 for Chinese version traditional & Chinese simplified.

  But the update patch is only for the PS CC2015 version, which means the question always remains CS6 and CC CC2014.

  At least, you can use your Chinese version of CC2015 first.

  However, when I tried to manipulate the dat inside Photoshop CC15 file and use it in CC14, my filters CC14 Gallery can also work now. And it can also solve the problem in CC PS too