Check that a value does not exist in the column of the anther
Hi friends,I have a three columns for the phone number in the table customers: Mobile1, Mobile2, Land_line
I applied a unique constraint on all of them.
But I want to make sure that end users cannot insert a number that is already exist in the Mobile1 column in a new record in the column Mobile2. and the verse of the Vice
I hope that my question is simple,
Kind regards
Fateh
Khayyam wrote:
So what is the best solution here?
I thought I already explained - question is bad design. Is solution - difficulty of design. Second possible solution is to MV. However, as I have already noted, error will be triggered with late reaction (unless the app is committed right after each insert/update the table customer).
SY.
Tags: Database
Similar Questions
-
Select in 1 table only if a value does not exist
Hi all
I have problems, develop a single select statement to accomplish a single return value. I tried variations of DECODE and COALESCE, but it eludes me.
I have two tables which are as follows:
NAME
ID FULLNAME
1, senior officer
Junior 2,
3, Mister
4, Senor
5, Miss
ABBREVIATION
ID, ABBR.
1, Sr
2, jr
3, M.
5, ms
What I want to do is choose from the table NAME only if that the value does not exist in the ABBREVIATION table.
Ideally if I were to do something like:
SELECT * FROM... WHERE (ID = 1 or ID = 2 or ID = 4)...
I would get the following output:
1, Sr
2, jr
4, Senor
Thanks for reading!You want an outer join.
SELECT decode(a.abbrev, NULL, n.fullname, a.abbrev) FROM name n, abbreviation a WHERE n.ID = a.ID(+) AND ....Something like that.
Complete example:
with n as ( select 1 as ID, 'Senior' as FULLNAME from dual UNION ALL select 2 as ID, 'Junior' as FULLNAME from dual UNION ALL select 3 as ID, 'Mister' as FULLNAME from dual UNION ALL select 4 as ID, 'Senor' as FULLNAME from dual UNION ALL select 5 as ID, 'Miss' as FULLNAME from dual), a as ( select 1 as ID, 'Sr' as ABBREV from dual UNION ALL select 2 as ID, 'Jr' as ABBREV from dual UNION ALL select 3 as ID, 'Mr' as ABBREV from dual UNION ALL select 5 as ID, 'Ms' as ABBREV from dual) select decode(a.abbrev, NULL, n.fullname, a.abbrev) from a, n where n.id = a.id(+) order by n.id; ID DECODE(A.ABBREV,NULL,N.FULLNAME,A.ABBREV) ---------------------- ----------------------------------------- 1 Sr 2 Jr 3 Mr 4 Senor 5 Ms 5 rows selectedPublished by: tk-7381344, November 17, 2008 13:31
-
Regularly I receive notifications of updated Brainiacs Sudoku which I had deleted Ipod Touch 5 g a long time ago. I can't disable the app update counter until I have download the update. So, how to disable the AppStore offers updated app that does not exist on the ipod touch 5g ios 9 and Reset counter of the application once and for all?
Try to hide this purchase
Hide and show purchases iTunes or iBooks on your Mac or PC - Apple Support
-
Why can not search for contacts on my profile bar, the search I want to say that if I need to find contacts I put the name in the search bar on my profile but still they say that this contact does not exist why this before it was ok
original title: the search for contactsHi Sam,
First select the operating system you are using, or maybe give an indication on the operating system installed on your computer. While other members of the community can help you with this problem.
You use Outlook?
Are you referring to outlook contacts?
Reference: http://support.microsoft.com/kb/555375
-
I can't connect to my account. He says that I already have a LIVE account when I enter my e-mail address, but when I use the "forgotten password", it says that this account does not exist. WTF?
Hello
For questions related to the application, Windows Live, Windows Live Support professionals/moderators will be best placed to help you. I recommend you to ask your question in the support forum for Windows Live for assistance:
http://www.windowslivehelp.com/
Hope the helps of information.
-
I installed Acrobat Pro 11.0.10. The WCChromeExtn file does not exist in the Acrobat folder, so that I can't use the extension of the conversion of PDF in Chrome.
I do not know how to find this file, but it worked after the repair! Thank you.
-
ORA-14030: partitioning column does not exist in the CREATE TABLE statement
Hi all
We are trying to create a partition materialized view and get an error below.
ORA-14030: partitioning column does not exist in the CREATE TABLE statement
Our GL_BALANCES21 and GL_CODE_COMBINATIONS21 base tables is already divided by interval of the range on Code_combination_id.
In the same way that we try to partition the view materialized
We get the error.
ORA-14030: partitioning column does not exist in the CREATE TABLE statement
Where the clause there are 4 tables gl_balances21, gl_code_combinations21, gl_periods and gl_set_of_books.
CREATE MATERIALIZED VIEW apps. BAL_PART
PARTITION BY RANGE ("CODE_COMBINATION_ID")
(SCORE LOWER (80000) VALUES,
PARTITION OF LOWER VALUES (160000),
PARTITION OF LOWER VALUES (240000),
PARTITION OF LOWER VALUES (320000),
PARTITION OF LOWER VALUES (400000),
PARTITION OF LOWER VALUES (480000),
PARTITION OF LOWER VALUES (560000),
PARTITION OF LOWER VALUES (640000),
PARTITION OF LOWER VALUES (720000),
PARTITION OF VALUES LESS THAN (800000),
PARTITION OF LOWER VALUES (880000),
PARTITION OF LOWER VALUES (960000),
PARTITION OF VALUES LESS THAN (10400000),
PARTITION OF LOWER VALUES (11200000),
PARTITION OF LOWER VALUES (12000000),
PARTITION OF LOWER VALUES (12800000),
PARTITION OF VALUES LESS THAN (13600000),
PARTITION OF LOWER VALUES (14400000),
PARTITION OF VALUES LESS THAN (15200000),
PARTITION OF LOWER VALUES (16000000),
PARTITION OF VALUES LESS THAN (16800000),
PARTITION OF VALUES LESS THAN (17600000),
PARTITION OF VALUES LESS THAN (18400000),
PARTITION OF VALUES LESS THAN (19200000),
PARTITION OF LOWER VALUES (20000000),
PARTITION OF VALUES LESS THAN (20800000),
PARTITION OF VALUES LESS THAN (21600000),
PARTITION OF VALUES LESS THAN (22400000),
PARTITION OF VALUES LESS THAN (23200000),
PARTITION OF LOWER VALUES (24000000),
PARTITION OF VALUES LESS THAN (24800000),
PARTITION OF VALUES LESS THAN (25600000),
PARTITION OF VALUES LESS THAN (26400000),
PARTITION OF LOWER VALUES (27200000),
PARTITION OF LOWER VALUES (28000000),
PARTITION OF VALUES LESS THAN (28800000),
PARTITION OF VALUES LESS THAN (29600000),
PARTITION OF VALUES LESS THAN (30400000),
PARTITION VALUES LESS THAN (MAXVALUE))
QUICKLY REFRESH ON DEMAND
SELECT the QUERY REWRITE as
SELECT GL.GL_CODE_COMBINATIONS21. ROWID C1,
GL.GL_BALANCES21. ROWID C2,
"GL". "" GL_BALANCES21 ". "" ACTUAL_FLAG, "
"GL". "" GL_BALANCES21 ". "" CURRENCY_CODE "
"GL". "" GL_BALANCES21 ". "" PERIOD_NUM, "
"GL". "" GL_BALANCES21 ". "" PERIOD_YEAR ".
"GL". "" GL_BALANCES21 ". "" SET_OF_BOOKS_ID ""SOB_ID"
"GL". "" GL_CODE_COMBINATIONS21 ". "" CODE_COMBINATION_ID ""CCID.
"GL". "" GL_CODE_COMBINATIONS21 ". "" SEGMENT1 ",.
"GL". "" GL_CODE_COMBINATIONS21 ". "" SEGMENT10, "
"GL". "" GL_CODE_COMBINATIONS21 ". "" DIRECTION11, "
"GL". "" GL_CODE_COMBINATIONS21 ". "" SEGMENT12, "
"GL". "" GL_CODE_COMBINATIONS21 ". "" SEGMENT13, "
"GL". "" GL_CODE_COMBINATIONS21 ". "" SEGMENT14, "
"GL". "" GL_CODE_COMBINATIONS21 ". "" SEGMENT2 ",.
"GL". "" GL_CODE_COMBINATIONS21 ". "" SEGMENT3. "
"GL". "" GL_CODE_COMBINATIONS21 ". "" SEGMENT4, "
"GL". "" GL_CODE_COMBINATIONS21 ". "" SEGMENT5, "
"GL". "" GL_CODE_COMBINATIONS21 ". "" SEGMENT6, "
"GL". "" GL_CODE_COMBINATIONS21 ". "" SEGMENT7. "
"GL". "" GL_CODE_COMBINATIONS21 ". "" SEGMENT8, "
"GL". "" GL_CODE_COMBINATIONS21 ". "" SEGMENT9, "
"GL". "" "" GL_PERIODS '. "" PERIOD_NAME,"
NVL ("GL". "GL_BALANCES21" "." " (BEGIN_BALANCE_CR', 0) Open_Bal_Cr,
NVL ("GL". "GL_BALANCES21" "." " (BEGIN_BALANCE_CR', 0) +.
NVL ("GL". "GL_BALANCES21" "." " (PERIOD_NET_CR', 0) Close_Bal_Cr,
NVL ("GL". "GL_BALANCES21" "." " (BEGIN_BALANCE_DR', 0) Open_Bal_Dr,
NVL ("GL". "GL_BALANCES21" "." " (BEGIN_BALANCE_DR', 0) +.
NVL ("GL". "GL_BALANCES21" "." " (PERIOD_NET_DR', 0) Close_Bal_Dr,
NVL ("GL". "GL_BALANCES21" "." " (BEGIN_BALANCE_DR', 0).
NVL ("GL". "GL_BALANCES21" "." " (BEGIN_BALANCE_CR', 0) Open_Bal,
NVL ("GL". "GL_BALANCES21" "." " (BEGIN_BALANCE_DR', 0).
NVL ("GL". "GL_BALANCES21" "." " (BEGIN_BALANCE_CR', 0) +.
NVL ("GL". "GL_BALANCES21" "." " (PERIOD_NET_DR', 0).
NVL ("GL". "GL_BALANCES21" "." " (PERIOD_NET_CR', 0) Close_Bal,
NVL ("GL". "GL_BALANCES21" "." " (PERIOD_NET_CR', 0) Period_Cr,
NVL ("GL". "GL_BALANCES21" "." " (PERIOD_NET_DR', 0) Period_Dr
OF GL.GL_CODE_COMBINATIONS21.
GL.GL_BALANCES21,
GL.GL_SETS_OF_BOOKS,
GL.GL_PERIODS
WHERE GL.GL_BALANCES21. CODE_COMBINATION_ID = GL.GL_CODE_COMBINATIONS21. CODE_COMBINATION_ID
AND GL.GL_SETS_OF_BOOKS. SET_OF_BOOKS_ID = GL.GL_BALANCES21. SET_OF_BOOKS_ID
AND GL.GL_PERIODS. PERIOD_NUM = GL.GL_BALANCES21. PERIOD_NUM
AND GL.GL_PERIODS. PERIOD_YEAR = GL.GL_BALANCES21. PERIOD_YEAR
AND GL.GL_PERIODS. PERIOD_TYPE = GL.GL_BALANCES21. PERIOD_TYPE
AND GL.GL_PERIODS. PERIOD_NAME = GL.GL_BALANCES21. PERIOD_NAME
AND GL.GL_PERIODS. PERIOD_SET_NAME = GL.GL_SETS_OF_BOOKS. PERIOD_SET_NAME
and gl.GL_CODE_COMBINATIONS21.summary_flag! = « Y »
ERROR on line 54:
ORA-01013: user has requested the cancellation of the current operation
I checked the metalink note saying that ensure that all columns in a partitioning column list are columns of
the table being created.
Partition is already there, on the column of code_combination_id of gl_balances21 and gl_code_combinations21.
Please suggest.
Thank youIt's your mistake:
PARTITION BY RANGE ("CODE_COMBINATION_ID")but in your projection of column list, you have an alias he:
"GL"."GL_CODE_COMBINATIONS21"."CODE_COMBINATION_ID" "CCID",You must use the alias as a partition key, not the name fom the secondary table column.
--
John Watson
Oracle Certified Master s/n
http://skillbuilders.com -
Questions CHAPTER: classname does not exist in the current application package
CHAP, I integrated it into my application. When you put a file in my media with the specific file extension (.xyz) map and by clicking on it, my application successfully is started and managed as expected. That's the good news.
However, I tried to create a separate application to test the app-to-app content handling (so that other applications can call my request). In the application, I create my file (extension .xyz) on the handset and then try to claim it. However, when I try and call it, I get an IllegalArgumentException saying: classname does nto exist in the package of the current application. I checked that my main application has seen that full classname with package (com.test.ui.MainApp) and that my separate application tries to make the invocation with this same classname. He worked successfully on the BlackBerry Simulator (4.6 Simulator "BOLD"), but it throws the error above on my actual handset ("BOLD", 4.6.0.167)
Anyone have an idea what could cause this problem?
Please refer to the following.
Support - Classname does not exist in the current application package
Article number: DB-00751 -
"Error running query: the real member does not exist in the application.
Hi all
I have a HFM EN users need to run, but somehow they started getting this error "error running query: real member does not exist in the application". I traced their levels of access to mine, and I am able to run the same report without any problem but the user still getting the same error. what may be the possible cause. Please help me so that I can ensure the debugging.
Thank you
Zitouni
I was able to solve this problem by checking the user of security principals class was trying to run the report for. The user did not have acesss on the class of the said security and change all, solve the problem.
Thanks, Sattu
-
ORA-20987: APEX - interactive report region does not exist in the application
ORA-20987: APEX - interactive report region does not exist in the application
I'm trying to get the query of an international registration (interactive report) on a specific page in my application.
The code I am using is thesi:
create or replace function get_report_query (nPage_id number)
return varchar2
as
l_report apex_ir.t_report;
l_query varchar2 (32767).
l_list varchar2 (32767).
number of nRegion_id;
number of nIR_id;
OWA.vc_arr nm;
VL owa.vc_arr;
BEGIN
SELECT region_id
IN nRegion_id
Of apex_application_page_regions
WHERE application_name = "E-BRIL.
AND page_id = nPage_id
AND source_type = "interactive report";
nIR_id: =.
apex_ir.get_last_viewed_report_id (p_page_id = > nPage_id,)
p_region_id = > nRegion_id);
NM (1): = "DUMMY_JUST_TO_SET_UP_OWA_UTIL";
VL (1): = 'WHATEVER ';
OWA.init_cgi_env (nm.count, nm, vl);
l_report: = APEX_IR. () GET_REPORT
p_page_id = > nPage_id,
p_region_id = > nRegion_id,
p_report_id = > 0);
l_query: = l_report.sql_query;
because me in 1.l_report.binds.count
loop
l_list: = l_list | i||'. '|| l_report. Binds (i) .name | » ='|| l_report. Binds (i) .value;
end loop;
Return l_query;
end;
/
I want to get the query of the IR on my page 3. And I run;
get_report_query (3)
That's what I get:
ORA-20987: APEX - interactive report region does not exist in application, page 3 and 1278226325207011749 region. -Contact your administrator of the application.
ORA-06512: at "APEX_040200.WWV_FLOW_ERROR", line 630
ORA-06512: at "APEX_040200.WWV_FLOW_ERROR", line 911
ORA-06512: at "APEX_040200.WWV_FLOW_WORKSHEET_UTIL", line 33
ORA-06512: at "APEX_040200.WWV_FLOW_WORKSHEET_UTIL", line 55
ORA-06512: at "EBR_OWNER. GET_REPORT_QUERY', line 19
The regio_id seems ok, because when I ask this region_id of apex_application_page_regions, id 1278226325207011749 is returned.
Page 3 is also correct.
I tried to follow Denes Kubicek his blog (Denes Kubicek ApEx BLOG: interactive report query is).
What I'm doing wrong here?
We use the Apex 4.2.
Thanks in advance.
Reg,
Chris
1717220 wrote:
Please update your forum profile with a recognizable username instead of "1717220": Video tutorial how to change username available
ORA-20987: APEX - interactive report region does not exist in the application
I'm trying to get the query of an international registration (interactive report) on a specific page in my application.
The code I am using is thesi:
create or replace function get_report_query(nPage_id IN number) return varchar2 as l_report apex_ir.t_report; l_query varchar2(32767); l_list varchar2(32767); nRegion_id number; nIR_id number; nm owa.vc_arr; vl owa.vc_arr; BEGIN SELECT region_id INTO nRegion_id FROM apex_application_page_regions WHERE application_name = 'E-BRIL' AND page_id = nPage_id AND source_type = 'Interactive Report'; nIR_id := apex_ir.get_last_viewed_report_id (p_page_id => nPage_id, p_region_id => nRegion_id); nm(1) := 'DUMMY_JUST_TO_SET_UP_OWA_UTIL'; vl(1) := 'WHATEVER'; owa.init_cgi_env( nm.count, nm, vl ); l_report := APEX_IR.GET_REPORT ( p_page_id => nPage_id, p_region_id => nRegion_id, p_report_id => 0); l_query := l_report.sql_query; for i in 1..l_report.binds.count loop l_list := l_list||i||'. '||l_report.binds(i).name||'='||l_report.binds(i).value; end loop; return l_query; end;I want to get the query of the IR on my page 3. And I run;
get_report_query (3)
That's what I get:
ORA-20987: APEX - interactive report region does not exist in application, page 3 and 1278226325207011749 region. -Contact your administrator of the application.
ORA-06512: at "APEX_040200.WWV_FLOW_ERROR", line 630
ORA-06512: at "APEX_040200.WWV_FLOW_ERROR", line 911
ORA-06512: at "APEX_040200.WWV_FLOW_WORKSHEET_UTIL", line 33
ORA-06512: at "APEX_040200.WWV_FLOW_WORKSHEET_UTIL", line 55
ORA-06512: at "EBR_OWNER. GET_REPORT_QUERY', line 19
The regio_id seems ok, because when I ask this region_id of apex_application_page_regions, id 1278226325207011749 is returned.
Page 3 is also correct.
I tried to follow Denes Kubicek his blog (Denes Kubicek ApEx BLOG: interactive report query is).
What I'm doing wrong here?
We use the Apex 4.2.
The '0' in line 31 should be "nIR_id".
What is the purpose of the lines 24-26?
-
IPM. The weblogic user does not exist in the policy store
We cannot connect to the MPI with the error: the weblogic user does not exist in the policy store.
I updated COE field to add the Capture and Imaging.
We have 11.1.1.8 patched with more late installed environment
Related to the AD and SSO configured (kerberos)
Providers are:
SSO - provider WebLogic negotiate identity Assertion
OrangeAD - provider that performs LDAP authentication
DefaultAuthenticator - WebLogic authentication provider
DefaultIdentityAsserter - provider of assertion of identity WebLogic
Control for OrangeAD and DefaultAuthenticator flag is SUFFICIENT
There is no problem with Capture (include SSO)
Refreshment of the IPM security not solved the problem
In the discussion that I found said that weblogic user must be added to the provider (AD in my case):
https://community.Oracle.com/thread/2615536
Should I do this?
Is that it can be cause of problems for rest UCM, Capture, Admin servers?
Thank you
Leon
Let me explain here:
The link that you pointed out only responds by me
By default, the WebCenter JpsProvider calls / user role API to retrieve a list of roles that a user is a member. API/user role Gets a list of roles from the leading provider of authentication and ignores other authentication providers.
The Weblogic jps can be configured so that the user/role API goes against all configured authentication providers. This by adding a property, virtualize and it's true
From the Enterprise Manager domain
1. in a browser, go to the page of Weblogic Enterprise Manager
The URL will usually be something like: http://YourDomainSystem:7001 / em
2 expand Weblogic domain
3 right-click the field, and then select security--> security provider Configuration
4. click on the box to extend the identity store provider.
5. click on the button set up
6. in the custom properties, click the Add button.
7. in the name of property filed enter: virtualize
8. in the value field, enter: true
9. click on the OK button
10 restart the Weblogic Admin Server and the server managed by WCC
Please find below the Agency's response all risks
Thank you
Ranjan
-
Save for precedent: the "Attachment" object does not exist in the previous version
I'm trying to save a very simple VI from LabVIEW 2013 SP1 to LabVIEW 2009 but I get this strange error. The VI contains only basic ex that are available in all versions of LabVIEW (shift logical AND Select,<=, u8). ="" when="" i="" try="" to="" save="" it="" for="" labview="" 2009,="" it="" gives="" me="" the="" following="">
Missing object. The "Attachment" object does not exist in the previous version.
I thought first of all it had to do with being possessed by a lvclass, but even after that I removed the class (and unplugged from the lvclass) it always gives me this warning.
When I try to open it with 2009, it will fail to load the schema-block (error 6).
The next thing I tried was to copy the block diagram for a new VI and re - create the connector pane, but that doesn't change anything.
Any ideas?
Maybe "attachment" made reference to an attached comment (the arrow of a free label for an object on the diagram). I don't expect the presence of attached comments to cause a SFPed VI to not open, but it's the only thing I can think of. Try to remove any comment attached to your diagram and SFPing and see if that solved the problem.
-
I am trying to create a .bat file that stops a set of scheduled tasks and start another game, but when it works it is said that there is no such thing as the name of the task
SCHTASKS/Change/disable /TN ImageCopyTest
ERROR: The name of the specified job 'ImageCopyTest' does not exist in the system.Running schtasks/query does not list the tasks that I have implemented in Task Scheduler
For operational reasons, the tasks are set on "Run If the user is logged in or not ' and I read somewhere that this automatically makes the hidden task
Can someone shed light on how I can get around what I need this operation for our recovery after disaster
It's on Windows Server 2008 R2 Enterprise
Hello
Apologize for the delay in response. Because the question you posted is related to Windows Server and more complex than that which are usually dealt with here, this issue will be safer in our MSDN forums that cater to the more THIS professional audience.
Thank you.
-
Hello
I get this error when you try to run the sample of cards on the corrugation Simulator:
Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".
The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged. With the help of Mac, the latest versions of everything. The application runs in undulation ok, but I can't throw on the SIM BB10.
Someone else have this error and know why?
PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?
PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged. I guess it should not but leaves me clueless as to whats wrong with cards.
Thank you
The two directories (in the extensions directory and maps project directory) have permissions to 777.
But you gave me an idea...
It turns out that simply by putting
"Packages".
in setting output wasn't enough, I need the full path
for example: "/ Users/username/RippleSites/Maps/packed."
and presto, now it works!
Thank you!
-
Hi all
Cannot be getNodeWithProps. AppParameters treatment in the SOAP header error: AppParameters does not exist in the SOAP header.
" < = xmlns:env env:Envelope ' http://schemas.xmlsoap.org/SOAP/envelope/ ' > < env:Header / > < env:Server env:Body > < env:Fault > < faultcode > < / faultcode > < faultstring > cannot getNodeWithProps.» AppParameters treatment in the SOAP header error: AppParameters does not exist in the SOAP header. "< / faultstring > < details > < DrmServiceException xmlns ="http://drm.webservices.epm.oracle"> < Message xmlns:ns2 ="http://drm.webservices.epm.oracle"xmlns =" "> cannot getNodeWithProps." AppParameters treatment in the SOAP header error: AppParameters does not exist in the SOAP header. "< / Message > < Code xmlns:ns2 ="http://drm.webservices.epm.oracle"xmlns =" "> 0 < / Code > < / DrmServiceException > < / details > < / env:Fault > < / env:Body > < / env:Envelope > "
clues?
Thank you
Mady
Hi Mady,
Have you run a test of the DRM of this URL service section? Part of the SOAP message that must be sent to the web service DRM when calling the AppParameters is in the header of the SOAP message. This is the example that gives the URL:
http://DRM.WebServices.EPM.Oracle">
http://DRM.WebServices.EPM.Oracle ">http://localhost:5240 / Oracle/Drm/APIAdapter "
http://DRM.WebServices.EPM.Oracle "> ProductVersion = 11.1.2 CultureName = US, TimeZoneOffset =-360"
The error is just saying that the section of AppParamters doesn't seem to be there in the SOAP message that was received. How you call the web service DRM method that returns this error? It seems just that, however, it is called the AppParameters is missing in the SOAP message is sent to.
Do you need some kind of common authentication method setting upward for Weblogic and Shared Services, but not necessarily OID. I mentioned a possibility without using an external LDAP directory here on a case where you set up a development environment Re: configuration of the DRM web service API
Concerning
Craig
Maybe you are looking for
-
I can't go past that Ad - just want to buy music pages
-
HP G42 / G62 / CQ42 motherboard with graphics programs list switchable
I need a list of hp spare hardware (motherboard)especially with switchable graphics, I need to replace my motherboard.
-
I try to install of new anti viral software on my computer and I get the message that I need privelledges administrator. Can someone help me solve this problem.
-
Hello Latelely I've been working with the class connector, use it for raw TCP socket connections. I do turn my dose of reading in a different thread and have some problems with blocking read(). Normally, that's fine when no data is available, but for
-
My 2nd image will not download without logo - shows as a license...
Hi, I can not get my second image to download without a logo. My first image downloaded perfectly. The second image shows as a license, but opens with the logo spread across it.I think it has to do with being in the evaluation mode?