clean puts installeren

Similar Questions

• Clean puts 12 installeren onder windows 10 elements. ER is een doing opgetreden tijdens het installeren van Shared Technologies.

  I try to install Photoshop element 12 Windows 10. It has worked before, but after coming back to a previous installation on my computer, I have to install it again. Now, he tells me that 'an ocured errot during installation of the shared Technologies. It tells me to restart the computer and try again. So I did (twice) the problem is still there. What should do?

  Install the rollback and Shared Technologies for Windows

• ProBook 4440 s cleanly put to upgrade to 8.1 Windows overheating 64bits

  I took my Probook s 4440 which comes preinstalled with windows 7 64 bit (2 years ago) use it with an SSD in the last 8 months.

  A week ago I did the following:

  1. open Notepad

  2 - took the time to thoroughly clean all vents and fans. almost no dust was found.

  3 - do you have a clean install of Windows MS 8.1 64bits.

  4 installed MS Office bloatware and other applications.

  5 - installed 'certain' HP utilities like power plan a selected balanced both plugged and unplugged

  Since I upgraded to 8.1, I noticed that the computer overheats to the point if freezes or slow down.

  As for the fan, I noticed that the fan starts at random (or not) when the computer is overheating.

  I noticed that the overheating starting on hard drive (to the left of the mouse pad)

  If I put my hand on the left vents, I can feel the hot air coming out.

  No, its not heavy CPU usage. Sometimes, the laptop is slow but hot.

  Questions

  Can what spare parts I use to replace the fan with a greater RPM?

  How can I control the fan to be always on (I really don't mind a bit of noise in order to save my investment)

  Am I missing some HP software that will control the overheating?

  I see that HP has no fan control application and internet tools such as SpeedFan seem not to be able to manage the fan.

  It's a workbook perfectly. Suggestions are welcome.

  Thank you

  does anyone have a little app to control fan for some probooks (HPFanControl).

  Personally, I would go back to windows 7, windows 8 - 8.1 has a lot of problems & bad drivers.

• Clean puts het maken van een samengesteld pad

  Beste mensen, Wie kan mij helpen puts het next clean. Een blauwe Microsoft cirkel wil ik I letter uitsparen. IK heb van letter lettercontouren photos.

  

  IK cirkel (die ligt onder) Letter en i en select > maak samengesteld pad.

  IK squeeze pages next merger:

  

  Wie weet wat ik verkeerd doe?

  Check the appearance Panel, if there are effects or brushes applied.

  If you do not want to extend (and do not need to), you can create an opacity mask using the transparency Panel.

• Lightroom clean put 6

  Lightroom use ik om mijn foto bewerken you. sinds lightroom 6 er geks iets gebeurd. ALS ik na het importeren in lightroom een foto aanklik, dan gaat hij die foto openen, if even, dat maar hij die foto ready has f is foto scherper even in wat meer helder dan het final results. ALS ik daarna foto ga bewerken, dan komt het allemaal wel weer goed, maar het is lastig om kwaliteit van of I foto you heel, die ja zie owner not als I foto bewerkt would.

  My first thought is to try to disable the GPU acceleration in the Preferences, tab performance dialog box.

• Clean install and Bootcamp

  Hello

  I have this El capitan 10.11 Beta on my lab. Expected that this become 'real' elCappitan but it is still Beta (15A278b). So I thought to re - install the OsX system as a clean, put in the form of Hd of Mackintosh.

  But is it possible to keep my windows on Bootcamp... or do I have to reinstall that too? Takes a lot of time to do... Made only a few hours earlier...

  Thank you

  Heikki

  You can just format the OS X partition. There is very little benefit in wiping your hard drive (a mechanical hard disk defragmenting is an advantage).

• compatibilities met clean windows media plyer

  LK heb een clean puts the windows media player

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  Kies uw taal vervolgkeuzelijst onderkant van aan ITU of pagina om your question you posten in Taal van uw keuze. Post on the forum without jij het is voor Frans. ALS I niet vinden baking taal, support van jullie voor boven additional international Geraardsbergen kan

  http://support.Microsoft.com/common/international.aspx

• Compaq mini p/n-VZ387EA #UUG

  Beste members only forum,

  IK heb een clean puts mijn laptop. Compaq Mini.

  Deze was geprogrameerd is het programma, Windows XP Home Edition.

  IK heb geprobeerd, Windows 7 you installeren, says is niet goed Café,.

  Alle stappen zijn uitgevoerd maar op het einde kreeg ik op het scherm instalatie mislukt dat was.

  IK heb toen die laptop een tijdje niet meer used, bare en heb ik deze opnieuw opgestart.

  Nu is mijn XP gewist programma en als ik laptop opstart komt er op mijn scherm.

  "Enter CURRENT password:

  IK kan mij niet wat het Password herineren is dat ik heb tijdens het programeren van Windows 7 ingevuld.

  3 na maal verkeerd Password, ik op het scherm squeeze:

  The password check failed.

  Fatal error... System stopped.

  CNU9515NSC

  Said is het nummer van mijn laptop, het nr series. Staat achter Parker Suite op.

  IK heb al geprobeerd voor op you starten met toetsen: F8-F9-F10, maar steeds weer op het scherm verschijnt.

  Enter the CURRENT password.

  Ook als ik op try you starten via van CD of Windows XP Home Edition.

  WIE?  Kan mij yesterday helpen bij. AUB. IK weet niet meer hoe ik said kan oplossen

  Dank bij voorbaat meeting.

  Herwin Buyl...

  Hello

  First, see if you can remove the need for a power on password as follows:-use the code from my previous post if necessary.

  Shut down the laptop.  Now on TAP the ESC key as soon as you press the power button to access the start menu, then select f10 to open the Bios menu.  Use the arrows to select the Security tab and press ENTER.  Use the arrow keys again to highlight the power on password and press ENTER.  Enter the current password (use the code in my previous post), and then for the new password, just leave this blank and press on enter – do the same for the confirmation field.  Press f10, select this option to save the new settings and press to enter.

  Once completed, stop the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS ( f10 ) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.

  Post back with the details of any error message.

  Kind regards

  DP - K

• Use the TestStand error callback if in the editor

  We have an error message reminder custom in our process model to display errors of the operator.  What we would do is if in the sequence editor, use the TestStands error handling (where he gives the options of cleaning, put end to, ignore, etc.).  I don't see the code for this anywhere.  I could put in the example so that if in the editor, use the example which has similar options, but which has a shape and a different feel.  Is it possible to use programattically built in reminder vs recall process model we have created?

  Sorry about that. Try this one.

• HP OfficeJet G85 prints SLOWLY

  I use my printer for many years and it has been a great printer.  Just today (for no apparent reason) it started printing so slowly that it takes about 3 to 5 minutes to print a page!  I've tried several things suggested to the Board of Directors including the use of memory on the computer (no problem); settings in the preferences of the printer for the page to detect and uninstall of the printer and let it reinstall: nothing has worked.  Anyone have a suggestion?

  OK, if the truck moves very slowly, it is possible that you have an accumulation of aerosols inside the printer.  Start by gently cleaning the Strip coding as shown here.  Be careful here, because the Strip can be damaged if you are rough or solvents.   [Note: HP would not recommend the following, but I had good results.] As you open the lid, and then allow the carriage to the Center.  Now, pull the power plug.  Gently move the round-trip transportation.  If the carriage does not move freely, then you could clean the stem of transport with a wet paper towel.  Continue until the stem of transport is 'clean', with cleaning paper is no longer comes up with ink as he slide on the stem.  Once the stem is clean, put a drop (not more!) of light oil such as sewing machine oil or 3-in-one on each side of the carriage on the stem of transport and move the carriage back and forth repeatedly.  Then, plug the printer in, close the lid, turn it on and let the printer initializes.  [HP does not recommend lubing the stem of traffic because people too and can cause problems like a rod of too lubricated transport can collect paper fibers, pet hair, etc and become erased.]

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• Error 0x610000f6 General

  I received the General error above after problems with the printer doesn't recognize is not the print head.  He said it was incompatible. I removed, cleaned, put back in place and then received the error above.  Any thoughts?

  It worked!  Thanks for the help.

  In addition, the printer is a HP Officejet 6500 has more.

• HP 7310xi: error message on 7310xi color cartridge that I can't fix

  Last night (Sunday 7/5) I received an error message on my (all-in-one) printer - color Insert in stall left print cartridge

  I did everything, downloaded from HP, cleaned, put in new cartridge and I can get rid of the error message

  Is there any solution for this?

  Where can I put my HP laptop to print only in black, which would recognize the printer?

  In the paper here troubleshooting steps may help resolve the cartridge error on your Officejet 7310xi.  If the printer contacts and the cleaning cartridge does not resolve the question, and then check the spring as shown on this page.  If the spring is detached and has punctured the flex (2), that you have to fix the printer.  If the spring is dislodged, but did not damage the flex circuits (1) and then some have reported success with the spring in place.

  If the previous steps do not resolve the problem, you can remove the color cartridge and print in black only.  The printer will not copy or receive a fax with a missing cartridge and an error message appears on the printer screen (and perhaps on the computer), but the printer will print using the black cartridge to print black and gray areas of color versions.

  

• Problems with windows videohardware; BCCode: 117

  Hi all

  We have some time now that I have difficulties with my office.

  The first problem I have is that my office maintains restetting each time I close him.

  So when I start my desktop computer the next day or later that day my computer made a lot of noise (I guess that's the fan, normally it doesn't make that much noise). In addition to this time is reduced to a day by day, we bought him and if I don't set the time manually with internet works.

  This first mayvbe has nothing to do with the videohardware, but I wasn't able to resolve the issue so maybe you can help me with this problem?

  My second problem is my videohardware that cannot be repaired by the pc automatically.

  The text below is copied from "problemreport and solutions" and maybe can be useful?

  "discription.
  Een clean puts videohardware maaltijd gezorgd dat niet meer goed works Windows has.

  Problem with signature
  Name of the threat: LiveKernelEvent
  The operationsystem version: 6.0.6000.2.0.0.768.3
  Countrysetting-id: 2067

  helping the discription of the problem files
  WD-20140918 - 0044.dmp
  SysData. XML
  Version.txt

  Additional information about the problem
  BCCode: 117
  BCP1: 85699008
  BCP2: 8F029E40
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1

  "

  Could someone help me please? I would really appreciate it.

  Kind regards

  Bobber999

  Hello

  "The first problem I have is that my office maintains restetting each time I close him.

  So when I start my desktop computer the next day or later that day my computer made a lot of noise (I guess that's the fan, normally it doesn't make that much noise). In addition to this time is reduced to a day by day, we bought him and if I don't set the time manually with internet works. »

  Which is normally caused by a CMOS battery failed in the motherboard.

  If after having set the time/Date and stop and restart your machine the time is to say the year 2007-2009 etc., you have a CMOS battery has failed in the motherboard.

  They cost about $5 and are easy to replace.

  How to replace a CMOS battery.

  http://www.computerhope.com/issues/ch000239.htm

  __________________________________

  Your second problem:

  "A problem with the video hardware caused Windows to stop working correctly."

  , You update the drivers video and graphics of the site Web of the computer or the manufacturer of the graphics card?

  If you did, you then exchange the graphics card with a good known?

  See you soon.

• Desktop M8000 giving Bios Rom Checksum Error

  Hello

  My brother-in-law gave me their old tower to see if I could not going again for their children to use, the decent machine actually, he had 2 internal hard drives in it and he said it was more than ever and lock up often.

  The pc don't was not start (sitting at an empty screen) even if it had worked before, so the first thing I did was to remove the two hard drives and their hung outside for my main pc, he said, I wanted to see if they were healthy and if they had the virus on them, etc.

  Health check, past, defragmented both drives them (OMG they were horrible) and on the storage disk ran a virus scan and spyware scan (zero problems) spybot seek and destroy and completely updated avast updated etc.

  On the main C drive, I did Defrag, ran the spybot captured about 10 things mostly of cookies, nothing horrible, then ran avast, it is 17 things in temporary files, remove hit at the end of the scan, re ran the scans and it came out clean.

  Then the two drives are checked as work/healthy, defragmented, virus and spyware cleaning, put it back in the system and I still get the screen white, but maybe 1 out of 10 times I get

  BIOS Rom Checksum Error

  Detection Decivce IDE ATAPI

  Detection Decivce IDE ATAPI

  Detection Decivce IDE ATAPI

  Found the CDrom, boot from it...

  But no matter what I (F-keys, deletion etc.) I can't get the pc to answer or do anything.

  I also removed and then re-inserted the cmos battery thought he could do something to help her back running but no luck, I have a new battery to install to try it but thought to take a few minutes of waiting and re - install could lead to something.

  FTLOSM wrote: my power supply Tester digital antec today, plugged everything in and am get no flow in readings or error beeps, so I guess it's ok (nothing much wise instruction comes with it), but I have the 24-pin and 4-pin connectors in the right places here, that's what they give

  + 5V said 5.1

  + 12V1 said 11.9

  + 3.3V said 3.3

  -said 12v - 12.1

  + 12v2 said 11.8

  5VSB says 5

  PG said 350 ms

  These values of 12 volts out worrying par.2 1 tension or limits?

  The unit announces it will sound in case of errors, I get no flow in the readings or beeps, I just wanted to confirm on this.

  Cuz at this point, I checked the ram, hd, battery changed, makes the integrated reset cmos jumper option, but I don't always get anywhere then I suppose that its cpu or motherboard at this stage.

  Hello FTLOSM, reads that you list are fairly normal. A difference of one or two points on the readings should not be a problem, especially if the power supply is connected and powered. The 12 volt rails are mainly used for engines on the disks, so a small difference in the actual 12 volts would be well within tolerances. If 3.3 volts reading falls below 3 volts, then I'd be concerned.

  I would tend to think that the motherboard is the culprit, since it is rare that a processor will fail under normal circumstances.

  It usually takes a voltage spike to get a processor.

• meldingen on pc crashen?

  Goedemiddag,

  Squeeze voortdurend meldingen dat mijn pc gaat "crashen" through van Adobe Flashplayer, maar na control blijken er geen meldingen you zijn in het onderhoudscentrum, waar ik dat even clean heb geprobeerd you localiseren.die meldingen blijven zich herhalen en dan moet ik due Reg.Clean Pro installeren en buy BGY, dat zie ik niet even more. Draai met Windows 7 Home Edition premium SP1, weet niet same hoe said ik moet oplossen, wie kan yesterday wat zinnigs on like, hoe ik said kan oplossen?

  Hello

  You asked your question in the text of the Microsoft Community. Please you would click on the 'Change Region' button down to the left of the screen and select your preferred language. Now ask you question once again.

  Thank you.

  Translation of Bing above:

  Hallo

  U English your question would be of Engelstalige versie van Microsoft community. U zou klik knop op "regio stayed" bodem when van het scherm op uw voorkeurstaal select dan. Nude questions I question opnieuw.

  Bedankt.