Cleaning of a field

Similar Questions

• Focus / Unfocus spoils the fields when using custom fields - help

  Hello

  I hope someone can help me with a problem I see with a screen that contains a VerticalScreenManager that contains a number of custom HorizontalFieldManagers, which each contain a LabelField and an EditField.

  Note: I use a HorizontalFieldManager customer so that I can use sublayout to field possible as I need.

  The purpose of the screen is to allow the user to scroll through the fields and on the focus on the areas of editing.

  However, as the user rolls and fields in bulk and get focus, 'development emphasizing' is not 'cleaned' of previous field and so he is spoiling: several fields have the "update highlighting.

  I saw several other similar topics in the forum but nothing quite the same thing.

  Screen

  -Vertical area Manager (standard)

  -(Custom) HorizontalFieldManager - LabelField - EditField

  -(Custom) HorizontalFieldManager - LabelField - EditField

  -(Custom) HorizontalFieldManager - LabelField - EditField

  It seems that when the scrolling HorizontalFieldManager becomes and lose focus, but do not repaint itself? Is this possible?

  I use OS 5.0.

  Thank you very much

  David

  It seems that the problem was the VerticalFieldManager had not the color of the sae background as areas that are part of it and so when the focus and unfocus painted the background color VerticalFieldManager was painted, I don't know why this has been, and if it's a bug in the OS 5.0, but when I set the background color in the VerticalFieldManager I don't see the problem.

• show/hide fields based on the drop-down list of choices

  I have a field from the drop-down list with three choices. Based on the selection, I need a specific text form field to appear and the others to stay hidden. (Or if it makes the code cleaner, the resulting field could be a drop-down list, too, with the selected choice.) I don't know Java well enough to extrapolate the code from the examples online and it fit my forms. I can provide an example of form. Thanks in advance for your help.

  There are ways to run this.  the easiest for you would be to add this script to the event (calculation of the Properties tab) to calculate the field that must be hidden.  Take notes, all "/ /" is some tips for you to understand the code.  You will need to put this script in all the areas you want to replicate the behavior, change the value depending on what you want to accomplish.  the word 'event' means myself to make you understand.

  If (this.getField("dropdown").value == 'put value here') {//replace "drop down" with the name of the drops}

  Event.Target.Display = display.visible;

  }

  else {}

  Event.Target.Display = display.hidden;

  }

  This works if you have a small amount of fields.  If you manage to have a large number of similar fields, let me know because there are other, faster ways.

• What is an effective way to way logarithmic bin data with a constant number of points per decade?

  Hi all

  I would like to clean a logarithmic field of PSD in binning and averaging so that I have a constant number of points per decade (say 10, just for the sake of argument). Generally, means simpler and cleaner, I can think about getting this is research in the table entering all points between the frequencies A and B, with an average of these points and assigning a frequency (A + B) / 2 of the new average bin. However, I cannot find how to access frequency information, I need to achieve this. To be more clear, I can imagine if I had two tables, one who holds the frequencies calculated from my stream of incoming data, and the other which held and the amplitude of each corresponding frequency, that I might look for clues in the frequency table with values between A and B, then the average of the values in the table of amplitude which lie between the indices back put them in a new table with a new array of corresponding frequency. The process is a little more general that just on average every ten points, to say, as the number of points per decade continues to grow. My main obstacle at the moment, however, is that the amplitudes of the voltage are a set of values that receive through the operation of PSD, while the part of the frequency of the wave seems to be a DBL continues single-valued. I hope I've explained that well enough for someone to shed some light on my problem. Also, if anyone has a suggestion for a better way to approach the problem please let me know - there must be a pretty simple answer there, but it's deceiving me right now. Thanks in advance for the help.

  -Alex

  Hello

  If I get you right. you have:

  a table with the frequencies

  a table with the corresponding values of amplitude

  Then you want to merge parts of the data by averaging on the specific frequency ranges. I think that there is no VI 1 solution, you will need to write this on your own ():

  I start to get the min/max of frequencies and then interpolate a scale from your needs (like logarythmic) mounting with the quantity of bins you want. This should be an array again.

  Next step is to browse the frequency table, check (the first and) the last value in the location wanted (stop the loop, return the index). This should end up with an array of index. [I guess that's where you can save some computation time most by smart]

  Finally, use these indices to browse the amplitude values and make your average. Should return an array of the length of your array of locations.

  Ground in color fantasies and enjoy.

  Just what you intend to do?

• Don't need a list of all the recipients printed as wasting valuable resources

  Original title: print the list of safe senders

  Don't need a list of all the recipients printed as a waste of valuable resources paper and ink printing *.

  A little additional information would facilitate answering questions.

  What type of program. Print what etc.

  If you're talking about emails from Outlook.

  Export the data as a CSV file, but exclude unwanted fields, in particular the field of message body, because that would be very great.

  Import into Excel and clean the remaining fields.

• Is it possible CreateInsert with the value of the attribute of a backingBean method?

  Hello, I am using JDeveloper 11.1.2.3.0
  I want to create a new record in the database with an attribute in a backingBean method. I have therefore a method that returns a string and I want to use this value for one of the attributes when I fill out the form in the ADF. But I have a problem because the operation CreateInsert cleans all the fields of the form. Is it possible to only fill the other fields of the form and as a field to be filled in automatically with the value returned by the method? If this isn't the case, please give me an idea on how to achieve this.
  Thank you

  Ok

  For example, if you have a button to your form to create a new line.
  The button should be as below:

  And the code in your backing bean:

  public String onCreateRowClick() {
    OperationBinding op = getBindings().getOperationBinding("CreateInsert");
    Object result = op.execute();
    DCIteratorBinding yourIt= getBindings().findIteratorBinding("yourViewIterator");
    Row newRow = yourIt.getCurrentRow();
    newRow.setAttribute("aa", getAttributeValue());
    return null;
  }
  
  public DCBindingContainer getBindings() {
      DCBindingContainer bindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
      return bindings;
  }
  

  and of course, you should have the "CreateInsert" action in your page links.

  Do you need anything else?
  I'm not good enough with tutorials :).

• UI: looking for advice on how to avoid many cases JS statements...

  See you soon,.

  With a simple user interface (the user can check multiple checkboxes, radio buttons or find more stuff with text editboxes), I find myself with a lot many if statements wants to know what the user actually clicked/typed.

  For example. I've got 3 boxes - I then go ahead and write several statements such as if (1 & & 2 & & 3), if (! 1 & & 2 & & 3), etc. There are so many possible combinations so this will get rather overwhelming at any time. There must be a smarter way to do this?

  Thank you

  Rasmus

  Something like this:

  If (oDialog.show () //Get all your variables

  {

  Switch (rLColoumn.selectedButton)

  {

  case 0: area var = "bleed." break;

  case 1: country var = "slug." break;

  case 2: region = "custom"; var break;

  }

  var areaValue = tLColoumn.editValue;

  ......

  oDialog.destroy ();

  } else {//bail out if the dialog box is canceled

  oDialog.destroy ();

  return;

  }

  Now use your variables to perform your functions...

  cleaning (oDoc oArray field, areaValue);

  ....

  Substances

• Using validators

  I have a form to add customers to a database, when you have finished the form you click on the Submit button that calls a function that validates each component in the form by running each validator to the form's validate() function. If any of these validators returns and event INVALID, the form is not sent the form and fields that caused the form validation to fail are highlighted with a red rectangle.
  So far, this is the common and usual to the validators, but the thing is that I also have a Cancel button that cleans the fields on the form, so I also need to reset or clean the validators, how can it be done? Now when I press the Cancel button, the form is cleaned but the fields that caused a ValidationResultEvent INVALID are highlighted with the red rectangle, so how do I tell a validator to restore the initial state is? to remove the red rectangle?
  
  Thank you

  The only way I think to do is define errorString component = «» You must do this for each component that is marked invalid.

• Data clean up on a field select multi?

  I am building a washing machine data and all so far went very well until I got to a field select multi. I don't see any way to automate the cleaning of these data. I wanted to do a validation rule to find and replace the incorrect values that would keep intact multiples, but you can't do a validation on a field select multi. Our data are not very clean because of the downloads from the list, where perhaps someone used a different delineator or put healthcare instead of health care, it's simple fixes. Eloqua recommended I do it manually, and I hope that I don't need to go this route with the amount of contacts that need to be corrected. Someone at - it good ideas or someone had a similar problem?

  I exported the valleys of eloqua scope created a spreadsheet to clean manually. Fortunately, there are not so many values that I can't use the eloqua updated field value, there are only about 345 different variants. What I've been really driving here was to create something that we could use for the updated list with out having to manually check that the fields were accurate. This is how we do it in the past and it takes a lot of time. Go more far that I'll still have to check these values manually, we worked with suppliers to make them use our values, but we're still getting lists of shows and other places where it is almost impossible to ensure that they correctly spelled, or well he has no expression differently.

• Cleaning of a bode field

  I'm developing an application to test the hardware components designed by my colleague.

  My application can read signal from the material and data flows in a log file. In addition, I can order the supplies to perform a frequency sweep on one of its input signals. So I have the ability to connect to the input signal frequency sweep, but also a corresponding output signal.

  I can then do two things with the file:

  1. Read the log file and read the signals on a strip chart. I have adjustable low-pass filters to reduce noise on the raw, if necessary.
  2. Read the logfile of a signal frequency-swept, to execute a transfer function on two selected signals and plot the data obtained on a size-v-freq and a graph of log phase-v-freq, aka Bode plots scale.

  My problem is that my Bode plots are sometimes noisy, and I don't know how I should go about their cleaning.

  Here is an example:

  

  I know that the swept frequency input signal by was loud himself, so I thought to pass through a low pass filter before plotting, but it does not make changes.

  I also saw all the options of the CVI curve adjustment, but I'm not competent in whether or not it would sense, especially for phase-v-freq graph, as its shape is indefinite.

  Someone can push me in the right direction? I am sure there is information I provide not as well.

  Hi Rachel,

  For the example I provided, the input signal is "raw" unfiltered data. What it really is is forced to low sinusoidal voltage, which is summarized with the real signal on that channel on the material (which is the white noise of low voltage). For the purpose of our tests, we use the free entry and exit, and the output channel is simply the input channel put through a low pass filter. We see a (smoothed) sine wave phase shifted silent for output.

  After a long discussion with my colleagues, we think we know where we went wrong with this example.

  As I said, my application command equipment to do a frequency sweep. It is to reproduce what seemed the signals when my colleague uses his material (Venable) commercial frequency response Analyzer, which at the end of the day, we try replace by my application. How I got this set up has been the input signal would spend cycles N of a sine wave at the frequency f = Fstart, then f would increase percentage P cycles N to f = Fmax. N and P would remain constant.

  We realized that if we kept constant N, us would collect enough data to higher frequencies, which is probably a lot of noise at higher frequencies due to the low SNR of the input signal. We believe that this could help clean up the ground, but we could still have a fundamental problem with how we have tried to make the TransferFunction.

  I logged on to the whole of the file, would have extracted all input and output signals and performing the unique function of transfer on 2 tables of the data set. I think that we became aware that the error in this method is that while signals (in the time domain) seem to be reproducing the Venable, the Venable analyze each individual f step and produce a data point for the route of Bode. We now believe that this is how the CVI TransferFunction function must be used. That is, providing instead a signal complex (y = sin (f0) + sin (f1) + sin (f2) +... + sin (Fmax)). It would be too resource-heavy for our material.

  If someone can confirm if it is the right way to use the TransferFunction, it would be very appreciated...

• Data clean on a numeric value in the text field

  Hello team,

  There is a field called 'turnover' in our Eloqua instance. It is a text field, but contains mostly numeric values synchronized in the same field of SFDC. The SFDC field is numeric.

  I am trying to write a program of standardization of data that uses the "Annual sales" value to update another field, "standardized annual income", with the value appropriate for example Strip $0 to $5 M, $5 - $10 M, $10 / $20 M...

  I created a rule to update that search values:

  • between 1 and 5000000 "turnover" and updates the "standardized annual income" field of $0 à $5 M
  • between 5000001 and 100000 in the "Annual income" and updates the "standardized annual income" field $5-$10 M
  • and so on...

  However when I test it I get the correct value in 'annual standardized income. " I also tried using filters to make contacts with the "annual income" values between 0 and 5000000 but I get all kinds of values outside this range.

  Can someone tell me where I'm wrong? Is it because the data type of the field 'Turnover' is the text rather than digital? I guess I could create a new numeric field for "Annual income", write values existing in this area and change the SFDC integration but I would avoid it if possible. If anyone has any bright ideas, I'd love to hear them.

  Thank you

  James

  For anyone interested, I got the answer from the Support. As it is established as a text field that eloqua is trying to make an alphabetical "between" rather than a digital "between". As it is not possible to change the data type of a field, I need to create a new digital field, export the data to the existing field (as well as email address) and upload again to the new field.

• How can I clean the data which are drawn upward during the filling of fields?

  For example, when I start typing my e-mail address I get a few suggestions that have been misspelled errors.  Thank you

  Depends on what browser you use the approach. Set your browser to clear 'Saved historical form' it will clear.

• Setup automated uninstall of firefox for a total clean

  I noticed that after installing firefox 40,0 sha 512 84228c5e70b0ca4b3a8444007691a06cac1ecb6d81995d11a225e6e29dac6799267ebfe60488d0934e32567599c6a4ef0f849dfddbbfd3abdf0b0282599f10c3 cleaning
  When I get the Ebay order I am directed to Paypal and automated username is pasted into the field and it is incorrect. This means that firefox is keeping information even after a procedure to uninstall Firefox, https://support.mozilla.org/en-US/kb/uninstall-firefox-from-your-computer.

  Someone can tell me why the uninstallation procedure did not remove information from Paypal but id remove password, log in to other accounts? Also is there any suggestions to expressly remove this entry for Paypal?

  This should not be difficult. An uninstall program should support Firefox or be incorporated in the installation program. I have received no explanation as to why the e-mail entry still exists?

• on the home page, the symbol of firefox has disappeared and there is an ad for registry cleaner?

  Yesterday, my homepage has changed - there is no normal firefox symbol with the little Fox hug th Earth. Just four color wheel, next to him "search results" then the field empty to enter in a search. Below that is an ad for a registry cleaner. It presents the new homepage of firefox?

  Hello, this looks like a problem maybe caused by adware on your pc. Please go to firefox > addons > extensions and remove any suspicious entries (toolbars, the things that you have not installed intentionally, I don't know what purpose they serve, etc.). also, go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software you have in place and various other tools such as the free version of malwarebytes & adwcleaner.

  Remove a toolbar that has supported your Firefox or the homepage search
  Fix Firefox problems caused by malicious software

  afterwards please install the reset search addon - he'll come back more often customizations make these adware programs in default firefox: https://addons.mozilla.org/firefox/addon/searchreset/

• Upgraded from Vista to Win 7. Cannot type in any field of Firefox.

  I've successfully upgraded my laptop from Vista home premium to Windows 7 Home premium.

  Firefox loads OK, but I'm unable to type in any field of research etc. or even to send this request (I use my desktop computer to send this).

  Hope you can suggest how I can solve this problem.

  Thank you

  Bob

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 21.0: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible, the settings in the software security and cleaning of the Windows registry.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you will lose all personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall