Clear the console through script?

Similar Questions

• The console to load balancing proxy

  Hi people,

  I have set up 2 servers of vCloud Director for redundancy:

  Server 1:

  http address: vcd1.example.com

  Console proxy address: vcdcon1.example.com

  Server 2:

  http address: vcd2.example.com

  Console proxy address vcdcon2.example.com

  I've set up a public URL through a load balancer: vcd.example.com. It works perfectly - I can connect to the public URL on the load balancers and functions of vCD correctly.

  It is:

  https://vcd.example.com load balanced back end vCD servers vcd1.example.com and vcd2.example.com.

  Now I try to get the proxy to the console through the load balancers and have not been able to get this working.

  First, I checked the remote console works when connecting to the address consoleproxy on the servers of vCD, for example vcdcon1.example.com and vcdcon2.example.com. The console connects very well and I can connect to the virtual machine.

  I set up one address public consoleproxy on the load balancers, for example https://vcdcon.example.com that load balances at vcdcon1.example.com and vcdcon2.example.com.

  When the remote to a computer virtual console is launched, I get the following error:

  Unable to connect to the MKS: Timeout during an attempt to read.

  I tried this on a Juniper DX load balancer and a device of Zeus Traffic Manager and get the same results. On Zeus, I can see the last HTTP request sent from my PC before the above error is visible:

  CONNECT 10.10.10.100:902 HTTP/1.1

  10.10.10.100 is the public proxy IP console, i.e. vcdcon.example.com.

  I use self-signed certificates free for the public and back end https.

  Someone at - it work for vCD consoleproxy addresses of load balancing?

  TIA - Trevor

  Hi Trevor,

  try changing the load balancing policy, try using a simple tcp strategy, without cookies management

  Max

• E-mail through back of the commands or Scripts!

  Hello

  I need to know is there a way by which we can send email through scripts, or the DOS commands "without" using any third-party application. If Yes, can you please explain to me in detail.

  TIA

  Concerning

  Ankit Sethi

  Hi Ankit Sethi,

  We can refer to the following articles and check if it helps.

  OLEXP: How to send from Outlook Express mail from a command line

  Send email from a command prompt by using the IIS SMTP Service

• GANYMEDE user through the console?

  Hi all

  We had a strange problem with authentication via GANYMEDE. Logging on to a switch via VTY works well... I enter my user name and PW and start at the privileged exec prompt. But when I am trying to connect through the console, I won't get it priviledge rights exec without entering in a passage of the ena. This phenomenon occurs in different versions of IOS.

  Config looks like this:

  AAA new-model

  AAA authentication login default group Ganymede + local

  the AAA authentication enable default group Ganymede + activate

  default AAA authorization exec group Ganymede + none

  AAA authorization network default group Ganymede + local

  AAA accounting send stop-record an authentication failure

  AAA accounting newinfo periodic update 15

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  !

  username privilege 15 password

  RADIUS-server host x.x.x.x

  RADIUS-server host x.x.x.x

  RADIUS-server timeout 25

  radius-server key

  Line con 0

  exec-timeout 0 0

  line vty 0 4 aso.

  Any ideas?

  Kind regards

  Sebastian

  Sebastian

  What you are experiencing is a behavior of Cisco implements voluntarily. As has been explained to me, to directly enter mode privilege is a combination of authentication and authorization. For the vty ports it is enabled. For the console, it is the authentication, but not the component of the authorisation. The reason for this is that it is easy to misconfigure the framework for approval of the configuration. It's one thing to lock you into the vty ports and it's something of another (and more serious) If you lock you out of the console. So as a safety mechanism Cisco only default not apply permission on the console. You will need to enter the password to enable on the console.

  HTH

  Rick

• MaxL Script to clear the data between two dates

  Hi all

  I need advice to clear the data between two dates, I have three dimensions in my sketch, 'eno', 'hiredate' and the 'actualamount '.

  Now I need to erase the data between the date range, up to now, I have this script,

  Fix ("HireDate", "Eno")

  Difficulty (@relative ("00:00:00",0),@relative("eno",0)) 2015-07-15 "))

  CLEARDATA "sal."

  endfix

  ENDFIX

  These scripts only clears on a specific day, but I tried to write the script to clear between two dates, I surfed on a few sites, but no clear answers, finaanly came here, kindly help in this regard.

  Thanks in advance.

  Have you not tried the format of "startdate":"enddate" for example "August":"September."

  See you soon

  John

• How to clear the log messages alerts in the console em12c

  After installing em12cr3, I check the log of alerts via console em12c.

  so I want to erase that checked the messages, but I don't know how to do it.

  Please let me know

  Thanks in advance.

  Hi team,

  From the Console, you can try the following

  Connect to the Console

  Under the Enterprise-> Monitoring-> click the Incident Manager to go to the Incident Manager UI menu item and then click on the link ' open issues ' on the left

  Identify problems specific to your target.

  Click the problem link to view details

  On the right side, you should be able to solve the problem which will clear all Incidents related to the problem.

  or

  Go to the homepage of the target

  Click the menu level target and go to monitoring-> Incident Manager => click on all problems open on the left and identify problem here - click on the problem link to show details--> you should again see the clear option to clear the incident here

  Also you can check below metalink doc to understand what the Cloud Control measures can be erased manually if necessary

  REF

  What are the Statefull and stateless Metrics in Enterprise Manager - explanation and example (Doc ID 733784.1)

  Kind regards
  Rahul

• Dreamweaver freezes every morning, the console shows he's going through all my fonts?

  I'm on a mac, 10.9.2, with Dreamweaver CC (just what is the latest version). Every morning, after the start-up of Dreamweaver, I get about a minute or two, then it freezes. When I check the console log, I see that he's going through all of my fonts. I could publish the newspaper, but it's the same line over and over again, just with different fontnames (and unfortunately I don't maaaany fonts, but only a few of them are active):

  Note the performance of CoreText: customer called CTFontCreateWithName() using the name "Futura Light" and got with name 'FuturaBT-Light' PostScript fonts For optimal performance, use only PostScript names when calling this API.

  I have to admit that I don't know what that means, or what to do about it? CC other applications do not do that, only Dreamweaver (which shouldn't need to all fonts at first, with the exception of a few standard fonts-batteries). Anyway, usually I force - quit Dreamweaver and after that it works fine (as fine as Dreamweaver is usually the case, at least).

  A note on the side - here at the office, we use Universal Type Client of Extensis font management.

  Any help? Good ideas? Lucky guesses? ;-)

  Thank you

  We have checked the issue & looks like DW starts scanning all Extensis font at startup. We are studying it.

  In the meantime, it would be great if you can file a bug here. This will help us to give priority to it based on the number of requests from users.

• How to clear the FunctionId once selected through pageContext

  I designed a customized OPS Page and fixed through two functions for two different types of users.
  
  I have implemented different conrols according to the function through which the user starts on page. Enable/disable some buttons and differently filtered data. I use pageContext.getFunctionId () to get the ID of the Page function and then implemented controls on this basis.
  
  Problem which I am facing is, when the user opens this OPS Page using, it has normal and everything works well. But when another user opens this page through second function on the same Machine/browser, functionaity/controls to the user or primary role continues.
  
  When I checked, I found that when I call pageContext.getFunctionId () for the first time, it saves it in the browsers Cache, and it keep unless I manually clear the browser history.
  
  Once I have clear the browser history, and reconnecting with any user, and it starts Page with any function, it has normal but only for the first user.
  
  Is there anyway to clear the pageContext value so that it does not use the value of the cache of the browser.
  
  Published by: 852357 on April 14, 2011 18:32

  Hello

  Suppose that there are two functions:

  User 1:
  Func 1: call of HTML: OA.jsp?page=/...&test=Y

  User 2:
  Func 2: HTML call: OA.jsp?page=/...&test=N

  Thus, in this way that you can get the test setting in the application process and checks if the value if the Func1 has been called
  or 2 Func was called.

  There is no need to enter the id of the function.

  Thank you
  Gerard

• How do you perceive a swing through the console Panel?

  While I'm not a Swing / GUI developer, I have a question. How do you perceive a simple swing through the console panel?
  
  I created a simple method of hand [see below]. It compiles perfectly, but when I go to run the compiled file, nothing happens. He returned to the command line. I have a feeling I'm missing something, but I don't know exactly what it is. Can someone point me in the right direction?
  
  Thank you!
  
  

       public static void main (String args[]) {
            JPanel header = new JPanel();
            
            JPanel spacer = new JPanel();
            spacer.setPreferredSize(new Dimension(150, 20));
            spacer.setPreferredSize(new Dimension (150, 20));     
                      
            header.add(spacer);
            
            JLabel title = new JLabel("Current Testing");
            header.add(title);
            
            JPanel spacer2 = new JPanel();
            spacer2.setPreferredSize(new Dimension(150, 20));
            spacer2.setPreferredSize(new Dimension (150, 20));
            
            header.add(spacer2);
            
            JSeparator jSep = new JSeparator();
            header.add(jSep);
       }

  You must add the Group of experts to a top-level container and display this container.

  Start by reading the Swing tutorial [url http://download.oracle.com/javase/tutorial/uiswing/TOC.html]. Maybe start with the section "use of the Swing components. Choose a component that you want to use, and look at this article for examples of work.

• To extract info doc and metadata of the document through a script

  I'm not a Javascript or Java programmer, so I could be missing in one or more stages.

  Watching the news of Javascript I have I see the following code:

  var r = new Report();

  r.writeText (this.metadata);

  r.Open ("myMetadataReportFile");

  Save("/c/MyReport.pdf"));

  The code doesn't seem to work when run from the console. If I run 'this.metadata' I get the information I expect. This suggests that the problem is with the creation of reports and save the document.

  I haven't found how to get information on the Doc Info dictionary.  There is another need.

  NOTE: In both cases (XMP and DocInfo), we will add CUSTOM metadata.

  Ideally, I would record two XMP and DocInfo as XML information sets. In this way, we can make a comparison between the two.

  Finally some code I've done with must be able to perform the Wizard Action on about 10,000 files. If the input file is "file.pdf" output should be "file.xml".

  Thank you.

  IRA

  To run several lines in the console, you must select them all with the

  the mouse and press Ctrl + Enter.

  Subsequently, you can place the code in an Action and run it like

  that, Yes.

  The "metadata" property must return the complete XMP file, including any

  Custom properties.

• build the new database through scripts must understand Spanish character sets.

  Hello gurus,
  I need to some simple tips, a good chance for some quick points for you.
  I've never built a database to understand any different other than the U.S. English character set. I now have to build a database that will be used for characters Spanish-keyboards, etc. But I will use English to install 11g software. I just want to be able to show the Spanish characters in the data for the names of clients.
  I will create the database with scripts that I did to make the standard model for data files, control files, etc..
  Then I import in a dump that I did and that was done with American English character sets.
  The system is 11g (11.2.0.3.0) on Linux Enterprise Server 5.8.
  I thought I'd use the AL32UTF8 character set, but I'm not sure where to use them.
  My original test showed no Spanish characters for names of customers as the "tilda" or "sueano" (excuse my spelling). But in this case I did the exceptional for Spanish, I used only the construction of standard American English (no change in the file init.ora or original database create script).
  
  How can I adjust my settings file for the initial creation of the database model to be able to understand the Spanish character set and still be able to import my dump error-free file.
  
  EXAMPLE of a build script:
  
  CREATE DATABASE mynewdb
  The USER SYS IDENTIFIED BY sys_password
  The USER IDENTIFIED BY system_password SYSTEM
  LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/mynewdb/redo01.log') SIZE in the 100M.
  GROUP 2 ('/ u01/app/oracle/oradata/mynewdb/redo02.log') SIZE in the 100M.
  GROUP 3 ('/ u01/app/oracle/oradata/mynewdb/redo03.log') SIZE 100 M
  MAXLOGFILES 5
  MAXLOGMEMBERS 5
  MAXLOGHISTORY 1
  MAXDATAFILES 100
  CHARACTER SET US7ASCII
  NATIONAL CHARACTER SET AL16UTF16
  
  If I replace to AL32UTF8 AL16UTF16 NATIONAL CHARACTER SET, will it work to show the Spanish characters?
  
  Sorry for the long-winded question, any advice will be great.
  
  Fortunately,
  Shawn

  Hello
  the national character sets is for the column as nvarchar types not for normal varchar data types. So if your dump file contains column types, you also need to set. The character set is for normal column as a varchar types. The use of unicode is best practice if you use the multiel language, but keep in mind that multibyte character set can be a problem when importing because varchar2 (10) means byte 10 and not 10 characters, so mistakes as an identifier for a long time may occur when importing.
  You can create the database.

  See this documentation:
  http://docs.Oracle.com/CD/B28359_01/server.111/b28298/ch2charset.htm

  You can use a like WE8MSWIN1252 character set which covers the Spanish also (like many, I know) and a superset of us7ascii

  concerning
  Peter

• CreateChild simple script returns an undefined error but runs in the console?

  Hello

  Well, I'm really a newbie... I have read many threads made a lot of research and no matter what I cannot do the following to run correctly in the js file. Even if the code is running in the console...

  / * Bookmark * /.

  var myRoot = this.bookmarkRoot;

  function createBookMark()

  {

  myRoot.createChild ("test", 0);

  }

  app.addToolButton({)

  cName: 'Add bookmark Test', the name of //Button

  cExec: "createBookMark()", call //Function

  cLabel: "Bookmark test", //The text on the button

  cTooltext: "Create bookmark test" //Help text

  });

  Error:

  myRoot is undefined

  25:app:exec

  TypeError: myRoot is not defined

  25:app:exec

  In the console:

  var myRoot = this.bookmarkRoot;

  myRoot.createChild ("test", 0);

  code runs without error.

  What I am doing wrong?

  You must pass myRoot as a parameter to the function. If the function

  header must be:

  function createBookMark (myRoot) {}

  And the call to the function should pass this variable, as follows:

  cExec: "createBookMark (this.bookmarkRoot).

  You need to remove the first line of code (the myRoot statement

  outside of the function). There is no point in the code.

• Ubable to start the Enterprise Manager console through a browser in Oracle 11 GR 2

  Dear friends
  
  I tried next. But I'm not able to get the console em via my web browser.
  Here, I write what I done.î started my listner of database and databases, she found working properly. So please let me know what I'm missing here.
  
  [oracle1@WBH-DB1 ~] $ echo $ORACLE_HOME
  / ora11gsoft/ODB/OH1
  
  [oracle1@WBH-DB1 ~] $ echo $ORACLE_SID
  wbdata
  
  [oracle1@WBH-DB1 ~] $ echo $PATH
  /usr/lib/Qt-3.3/bin:/usr/Kerberos/bin:/usr/local/bin:/bin:/usr/bin:/ora11gsoft/ODB/bin:/ora11gsoft/ODB/OH1/JDK/bin:/ora11gsoft/ODB/OH1/JDK/lib:/ora11gsoft/ODB/OH1/bin
  [oracle1@WBH-DB1 ~] $ hostname
  WBH - DB1.wbtea.com
  
  [oracle1@WBH-DB1 ~] $ emctl start dbconsole
  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
  Copyright (c) 1996, Oracle Corporation, 2009. All rights reserved.
  https://WBH-db1.wbtea.com:1158 / console/em/aboutApplication
  Oracle Enterprise Manager 11 g Database Control from... began.
  ------------------------------------------------------------------
  Logs are generated in the /ora11gsoft/odb/OH1/WBH-DB1.wbtea.com_wbdata/sysman/log directory
  
  I try after the url in the browser firefox web
  
  https://WBH-db1.wbtea.com:1158 / em
  
  and I got the following error
  
  The secure connection failed
  
  xxx.xx.xx.XX:1158 uses an invalid security certificate.
  
  The certificate is not trusted because the issuer certificate is not approved.
  The certificate is not valid for all the server names.
  
  (Error code: sec_error_untrusted_issuer)

  Hello

  you are not missing anything.

  Business Manager works fine. Accept the certificate and press on continue button...

  Can you try running the same in internet explore also.

  Concerning
  Rajesh

• Word document and clearing the Blackberry browser cache automatically

  I hope that is clear enough, let me give you general information.

  I developed an application of launchpad for launching the BB browser and it points to a Web site on the intranet that allows end-users to access a word document.

  The end users have access to this document periodically throughout the day to see it has updated content.

  The content of this document is updated regularly throughout the day, a problem arises, however, as the browser cache a copy of this document once it is loaded at the start and can be only manually clear the cache of the browser via the OPTIONS > DELETE the BROWSING DATA > now CLEAR will allow the end user see the updated document to update. This aspect should be done whenever the user wants to see the document, which is unacceptable.

  I realize account by using a word document is not an optimal solution, but under certain constraints, it was the only option available at the moment, which brings me to my question.

  Y at - it no practical way, whether programmatically, through BES settings or programmatically so that the browser delete it has cached content automatically?

  All of these options are excluded, are there no known method to simulate clicks, or control on a BB, be internally via the BB API or even 3 options part where this might be film script in the app to ban? (think windows GUI automation similar to AutoIt or something in that sense).

  Basically, I need a solution where the end user will not need to go into the options and delete the data itself, I realize this is the simple answer to this problem, but there are reasons why this isn't an option.

  I searched the forums here, but also google extensively and found previously that similar surveys were not happy with the results, I hope the further development or even 3rd party solutions may have been raised for this problem.

  Any input would be much appreciated.

  Hi @GSPSDev,

  On the first issue, caching is done based on the URL instead of emptying the cache, all you have to do is add a timestamp to the URL query string and the browser does not load the document from the cache. For example: If your original URL is: http://foo.bar/a.doc, then each time your shipment a request, send it to: http://foo.bar/a.doc?t=%timestamp% (timestamp is simply the value of System.currentTimeInMillis ()).

  On the second issue, the BB API allows you to simulate clicks of the user using the EventInjector:

  http://www.BlackBerry.com/developers/docs/5.0.0api/NET/rim/device/API/system/EventInjector.html

  Hope that helps,

  E.

• Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.

  Hello I am trying to download my site www.novopro.co.uk screw "Publish to FTP" I have updated a page and downloaded from the website and now I get this warning on everypage. Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author. If I click ok the site will load, but I get this error on everypage. I removed all widgets party 3 E, g, engines search, galleries etc.

  I looked through the forum, but not seen no real solution to the issue, I looked at the 'Muse.assets' in the JSConsole and the only script to update is touchswipe.js I do not understand why its doing so, my host said there is no problems with the servers smd ive only uploaded the site (all files) several times.

  My client is now a little inpatient as im yet to find a solution and I'd like to solve this problem as soon as possible. Please can someone help me shed light on the issue and im using the latest version of adobe Muse. Adobe Muse CC 2015.2.1

  Thanks in advance.

  In addition to what was suggested above, you can see if there are other solutions in this doc "some files on the server may be missing or incorrect" Warning Message that can help you and let us know?