Click on the button SmartShape and changes color
Hello
If I click on a button of smartshape can I change her color according to the value of a variable for example 1 = yellow, 2 = red, etc.
to select color (and set variable) then click on the smartshape button to change the key for that color.
8.0.1.242, no LMS Captivate, output HTML, don't know if it will be admissible or not.
Concerning
Donal.
There is currently no ability to tip Action to do this. You can only SHOW or HIDE completed items to make it appear as if they changed color. However, if you do this with buttons, you must also DISABLE or ENABLE them at the same time.
Tags: Adobe Captivate
Similar Questions
-
I use Firefox 26, and I remember at some point in the past you could middle - click on the buttons back and forward to open the most recent last/next page as a new tab. Now, it does not work. I have not changed anything else on Firefox I know works, so was it gradually as keyword.url or is this something else?
... OK, this is weird. I restarted Firefox in safe mode and the reworked for/back Middle-click, so I thought it was one of my modules. Yet once, I opened Firefox in normal mode... and Middle-click works.
I have no idea.
-
Blue contours appeared and I can't control my iphone 5 s. I can't go to settings. I triple click on the button "home" and gives a message to go into settings and enter the password but I can't get to the settings. What does not work? Thank you
The blue plan is switch control.
s http://gettecla.com/blogs/News/15538916-what-is-switch-control-mode-in-apples-IO
Triple click to get rid of him.
"Siri to the rescue. I said turn off the control switch. »
Re: How to disable the switch control
I don't get a request for an access code. What is a school system?
switch control
Settings > general > accessibility > switching control
R
-
Click on the button conditional and alert when the condition is not met
Hello
I have a problem with the click of a button; in my form when the user clicks on a button I have to run the True action only if an element has the value; otherwise I would show an alert message like "enter value < element >...". ».
It seems a simple problem, I tried to insert the condition "Is not null" and warning that the action of false, but it does not work.
Who is the Apex way to solve?
Thanks in advance.
Cry
1. replace the button URL type
Code - javascript:validate();
2. create a javascript function in the page function and declaration of global variables
function validate()
{
If ($v ('YOUR_ITEM_NAME') == ")
Alert ('XYZ');
on the other
Apex. Submit ('BUTTON_NAME');
}
-
A left click on the button 'Next', the screen go to pale (frosted, low text) and locking. But a right click on the button 'Next' and selecting 'Open in a new page' instead, works very well. You are using Safari normally on the same computer works fine.
If you close Firefox, and then start Firefox in Mode without failure, in the problem? To start Safe Mode, go to help > restart with disabled modules.
If the problem does not occur in Mode safe, then you can disable your extensions one by one until you find out that one is at the origin of the problem. See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems.
-
stop audio and start another audio, click on the button
Hello
I have a document from multiple slides, and I want sound to stop when they click on the button 'Next' and another clip to start. Here's what I have so far:
audio
x = new Sound();
x.attachSound ("Slide1");
x.Start (0, 0);
musicplay = true;
forward_btn.onRelease = function() {}
gotoAndStop("2");
numbering numbering EQ ++;
};
So I just want to play audio clip "Slide2" when they click on forward_btn, and I want to "Slide1" to stop.
Thank you!Attach your file his second to the frame that will play the second noise. Then try to add stopAllSounds() before the gotoAndStop("2"); to get the first sound to stop playing and then play the second sound.
-
How to change the highlight color, click the button image and text and sound. are there packages of buttons for use in my project?
Hello
Even if the point of things based Web links buttons created using them is of simple images. Captivate uses simple images. If you need to put your creative hat and not to let the fact that you see the word 'web' scared you somehow. An image is an image. Use on the web, use Captivate. Same case!
If you change the properties of the button, you can activate the legend of success. Fix any sound that you like with the legend of success and it will play when you click the button. If you do not want to see the legend of success, delete the text and configure it as transparent.
See you soon... Rick
Useful and practical links
-
I used creative cloud perfectly until one day asked me to update and I clicked on the button. All software has now changed from trial version and I'll lose the right of access of Illustrator, Photoshop and InDesign in 10 days. What should I do now? Can I go back?
Hi Emily,.
Please visit: https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html
I hope this helps.
Concerning
Megha Rawat
-
My computer does not work and comes up with message after I've click on the button for auto repair
Hi my computer just stopped working when I turn it on it gives me the opition to repair or start normally once Ive clicked on the button for it to try to repair the computer which is recommended after a few hours, this message appears:
Stop
Unrecoverable system error
Session manager failed to create patches pre protected
System process stopped at unexpectably with a status of 0xc000003a
System has been shut down
Someone knows how can I get my computer working again please
Thanks in advance
Hi Charlenebaldwin,
· Did you do changes on the computer before the show?
· What version of the operating system is installed on the computer?
· You are able to boot to the desktop or SafeMode?
Follow these methods.
Method 1: Disconnect all external devices except the keyboard and mouse.
Method 2: Start your computer in last known good configurations.
Using the last good known Configuration
http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration
Method 3: Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2: If the problem does not persist, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
Method 4: Run the Startup Repair tool and check if the problem persists.
Startup Repair: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions
Method 5: If the problem persists, perform a restore of the system recovery (winre) windows environment.
What are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
-
Change the font size and clock color
Hello
I would like to change the font color and size where I see blue fonts or light gray on the desk clock. Looks like a selection here would, but I don't know that we apply to the clock. Any suggestions?
It is Vista Ultimate 64-bit SP2
Beginning
Parameters
Control Panel
Customization
Windows color and appearance
Advanced appearance settings
Apperaance advanced
AgendaThank you
Frank CIf it's the clock gadget, I don't know of any way to change those but there are 7 other clocks that you can choose with color and different fonts. You can see the first clock. To change the clock opens the gadget options box (place the cursor on the clock > click on the key icon) and click on the small directional triangles on the bottom of the clock. I hope I could help
-
Hi, so the problem I m having is that everytime I want to color correction my videos go crazy, the lines start appearing, video start changing color and I have already download the software again, but still it happens.
Hi Cv19g,
Sorry for this disorder, but it could be a problem with the graphic video card drivers.
What graphics card you have on this machine?
Check if you have provision for video drivers.
If possible, please attach a screenshot for "lines."
Also, try the following steps:
Open your project, click file > project settings > General and change of video rendering "Software Only Mode" and delete previews
Thank you
Ilyes Singh
-
I imported the images in my lightroom library catalog. All the images are numbered 001, 002, 003, etc. and downloaded in order.
I want to make a collection of web. I clicked on the WEB site tab and then click on the button "Import" in the lower left. All the images changed position. Anyone know what I did wrong?
Hi Peter,.
If some how changed the order sorted, you can go back sorting to 'Added A order' in the toolbar.
or, choose all the photos and click the view menu and sort to choose the sort order.
Also, here is the tutorial link to learn more about creating web gallery in Lightroom:
https://helpx.Adobe.com/Lightroom/help/creating-web-galleries-basic-workflow.html
Kind regards
Claes
-
Management while changing the value or by clicking on the button events
Hi all
I'm working on Jdeveloper 11.1.1.5.
I have a necessary requirement where I have a textbox and a button.
Now, if a user changes the value of the text box then I need to display a dialog to the user for confirmation if he wants to continue or not.
And when the click on the button that I perform my logic and engage in the database.
NOTE:-I'm going to open this dialog box on the valueChangeEvent of the text box.
Case 1: -.
User displayed on the dialog page and enter a value in the textbox control, and a tab on the ground, the value change occurs. -> OK
Case 2: -.
The user enter a value into the textbox control and do not tab on the field and directly click the button. In this case, actually valueChange and button code both runs at the same time. I mean, the user clicks the button, the dialog box get, but my logic is also performed. -> INCORRECT (ISSUE)
How should I limit the logic of the button should be executed until the dialog box has been established and the user has confirmed.
Please suggest!
Kind regards
ShahHi Shah,
You can try something like this:
AP
-
When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks. My internet works fine, I just can't see if I am connected or not. Help?
original title: list of Network Service does not illuminateHi SikDude,
Please use the Forum of the community for Vista.
Opening of services by typing services.msc in the search bar and find the list of Network Service. Under properties, set it to automatic.
Please let us know if we can do something else.
Matt
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I am trying to build a DVD menu, but whenever I click on the button "Toggle the display of the menu" options I get no picture and I am unable to create a menu. Can someone help me with this?
You need to install the library separately:
http://helpx.Adobe.com/Encore/using/download-library-content.html
Maybe you are looking for
-
service does not have the opening of session
everytime I open my profile screen shows; "your user profile service service has no logon. your profile cannot be loaded. "Please help me how can I solve this problem
-
Msconfig vs services.msc in win7
I was then trying to decide if I should use config to control my start-up, start-up deactivation etc, or is it better to use services.msc? What's the difference/consequences of both. Any thoughts greatly appreciated. Ken
-
See the above title
-
Error message: "Windows cannot execute SndVol32.exe.
Original title: I am running XP and try to use a MS LifeCam 800 - the microphone volume is low - can it be solved? I am running XP and try to use a MS LifeCam 800 - the microphone volume is low - can it be solved? Message error is "Windows cannot ex
-
Hi, I make an application where I use the microphone, the app is the capture of the microphone now, but it uses only the top of the microphone of the device page, that I want to capture the base mic (the one used for calls), I test on a dev c alpha a