Msconfig vs services.msc in win7

Similar Questions

• service.msc overrides msconfig active service?

  My msconfig contains a list of SERVICES with check marks on each element.  The State could be running or stopped, but no date is given in the column Date disabled.  In other words, that all are enabled, no?

  My services.msc is also a list but with automatic manual, different Types of starts, disabled, etc.  I read do not change status in msconfig, but it is normal to make changes in the services.msc.

  This means, if I change the Startup Type to disabled, this will replace the State enabled in msconfig?  I'm just trying to reduce the startup time.

  Answering your question: Yes, disabling a service in services.msc removes Msconfig list service so we can say it replaces the msconfig settings
  I would like to disable Msconfig
  Disabling services in msconfig is safer than services.msc because when you enable them again he will restore it with the same settings (as if it was the manual in the first place he goes back to the manual on activation)
  However I do recommend NOT turning off Microsoft services
  
  

• How does influence Services.MSC Msconfig.exe?

  How does influence Services.MSC Msconfig.exe?

  .. a small example to better understand my question: p
  Why when in Service.msc, I disabled Acrobat Update Service (for example), the service in Msconfig.exe still is checked in the service menu?
  It is marked as stopped however.
  Service process uncheck = unchecking in Services.MSC in Msconfig.exe?
  Reboot was done of course.
  Thanks, please help!

  The result would be the same.  The best practice would be to use the disable services continuously, change the startup type, or start services and Services using MsConfig just for troubleshooting.

  To see what is happening in real time, life is to try MsConfig and Services, including all necessary reboots etc (if you wish).

  Services can be affected through the registry too.  There are often several ways of doing things in Windows to get the same result.

• AMDS found on services.msc

  I faced problem when connecting my iPhone to the laptop after the new set iTunes to update so I uninstalled and installed again since then I can't find my iphone on iTunes and I checked the services.msc , I can't find the file AMDS & in programs and features. I tried to re-download iTunes several times, but again I can't find SMA on my laptop.

  Please help me!

  To uninstall iTunes correctly, you must follow all the steps detailed here:

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

• Windows Server 2008 windows Firewall is not running and service are not not in services.msc, how do I solve this problem

  as I have found our service of windows windows Server 2008 firewall does not and I checked services.msc and I couldnot find service of windows firewall in the list of services at all. Windows firewall & advance sercurity give error 0x6D9 code. Please let me know how to solve this problem.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• "services.msc" shows almost all disabled services. Who should be activated?

  Could not connect online.  Said to check microsoft for answers.  They said come on in 'services.msc' and turn on plug-and-play.  When I went I noticed that almost all of the services have been disabled and I don't know which ones to activate.  Can you help me?  Thank you e advan

  Viper black Windows XP Edition family and Professional Service Pack 3 Service Configurations

  The link above provides the name of the service with the default setting and what services are safe disable or change.

  For facilities more typical, many services are configured as "automatic", which means they will automatically launch at startup of Windows or when the service is called for the first time.

• Unable to connect WiFi: Services.msc maybe?

  I use several wireless receivers.  A PCI card and 3 Wireless USB devices.  Just bought a brand new Netgear N300 yesterday.  The modem is a type of Belkin N.  I can connect on a laptop that is about 3 years old, but not on my desktop.  I think there is something in Services.msc that blocks the WiFi because I have disabled or placed in many manual settings which were not necessary for optimal performance.  I have the usual stuff to automatic configuration wireless, CPP, etc..  I was wondering if there is anything that might be the problem.

  Just diagnosed with the Netgear software and the Ipconfig command.  They both say "Media disconnected" again the USB Wifi adapter is plugged in and sees the router.  Anyone know what "Media disconnected" means?

  First of all, I apologize if my previous answer seemed a bit snippy.

  You live dangerously with no. a / v.

  Your conclusion that it is not the router because everyone can connect is not necessarily correct.  You could still have an incorrect wifi encryption configuration - or this router is completely secure (not need a password to connect)?  What level does the router encryption have established?

  Assuming that you are really sure that you have the correct password (or it is not a), I suppose it is possible that in tweaking things you disabled some (I can't think) service that is required.  Take a look at the site of the Black Viper (link in the previous answer) and compare your list of the services disabled to set up "Safe."  Check the descriptions of all the services that you have disabled which helped Black Viper in its 'Safe' configuration

  You can also take a look at the event viewer (start > run > eventvwr > OK) and see if there are clues here.

  "Media disconnected" for a wireless network adapter that shows the router in the list of available wireless networks almost always means an authentication problem... and almost always he turns an incorrect encryption password.

  Just to be great depth...

  • Make a right-click on the icon of any wireless adapter is active and select Properties.  You should see a screen like this--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Connections/Wireless_Network_Connection/Properties/General/Index--2.shtml
  • Click the "Wireless networks" tab and you should see something like this-->http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Connections/Wireless_Network_Connection/Properties/Wireless_Networks/Index.shtml

    On the tab 'wireless networks:

    -is the box "Use Windows to configure my wireless network" verified or unverified?
    -is the SSID (network name) of the router listed under "preferred networks"?
    -If the SSID of the router is listed, it is a unique name, or is it a default value (for example, "Linksys")?
    -If the SSID is listed, a common method of "starting over" is to «remove "the entry;» OK your way your computer; and then try to connect to the network; all information configuration 'wrong' that has been repeatedly used will have been removed
    -Select the SSID of your router and click on "Properties".

    In the tab "Association":
    -What's in the box "network authentication"?
    -What is in the box of "encryption"?
    -is "the key is provided for me automatically" verified or unverified?

    Under the tab "authentication."
    -is the "Enable IEEE 802. 1 x authentication for this network"checked or unchecked?

• Can not find the ftp on services.msc service?

  Can not find the ftp on services.msc service?

  You must have an FTP server on your computer.  It is not installed by default.  You can use Microsoft "" Internet Information Services (IIS):

  «Internet Information Services in Windows XP...» »
    <>http://TechNet.Microsoft.com/en-us/library/bb457169.aspx >

  "How can I install IIS on Windows XP"
    <>http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_programs/how-can-i-install-IIS-on-Windows-XP/baa5c8d0-d0e6-4e72-a931-c6093126c0de >

  or you can install a 3rd party like FileZilla Server FTP server:
     <>http://FileZilla-project.org/download.php?type=server >

  HTH,
  JW

• services.msc, services is not displayed in the view extended XP

  problem when I open services.msc I get a blue screen in extended view, but I see services eveary standered mode option
  OS - xp profesiional
  Please help me to solve this problem without format and help me if corrective measures or tools will be useful to solve this problem of b

  THANK YOU & BEST REGARDS
  N.V.SRINIVAS

  Looks like your file jscript.dll became somehow not registered so you can re-record it.

  To do this, click Start, run and enter in the box:

  regsvr32 jscript.dll

  Click OK, and then you should see a message like this:

  DllRegisterServer in jscript.dll successful.

  It's good to register the dll, even if they are already registered.

  If you do not unsubscribe yourself the DLL. Maybe your system has a malware infection.

  I would follow with this:

  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• services.msc logs under "Local System account" instead of "This account" (previous setting for all) on WinXP SP3

  Just recently had problems to Windows Update and Windows Installer that were solved by Maurice N.  When you restart the Windows Installer service (again), I noticed that all the services loading of ' run: services.msc' happen under the Local System account. "  Is this a problem?  Found the remarks after a search online, which implies that it is not a good idea.  Previous setting was 'This account' suggestions on the evolution of this return?  I tried to change, but nothing happened.

  The Windows Installer Service must be on the Local System account.  I would fix the manual start, since he does not need to be put forward at every reboot and it works day and night to do nothing.  If you set it to manual, it will start when it needs start.

  This is true for many Services - as in Help and Support for example.  The 'experts' Support committed by Microsoft engineer will tell you always for this set to automatic, but it the Manual value and you will have more memory and CPU to the things that really matter.

  Please provide a link to the Web pages where read you otherwise.

  If you want to learn more about the Services of XP, I was looking at the site WWW Viper Black here.  Chances are that you have many Services running, you can do without.

  Depending on how much Service tweaking you did on your system and which components you have installed, you should define most of all THE Services to the Local System account.

  On my system, sort the list of services by the "Log on As" column, the exceptions referred to in this PROVISION of account/NT would be:

  Customer DNS (automatic)
  Performance logs and alerts (disabled)
  Remote procedure call (RPC) (automatic)
  Remote Procedure Call (RPC) Locator (manual)
  Windows Media Network Sharing Service (disabled)

  You can have more or less depending on what you have installed.  If you are not sure, ask.

  P.S. The technician 'expert' advice of technical support to run sfc/scannow has absolutely nothing to do with it.  It's just another one of their wild goose hunting support technician to receive credit for responses with links to KB articles that have nothing to do with your problem and will only waste your time.  You describe not as symptoms suggestive of a corrupt user profile.  It's a real shame.

• Is there a tool out of all the windows configuration settings? (gpedit.msc, services.msc)

  I am trying to build an audit tool to extract the Windows of my environment settings, and it compares with planning what I defined. This baseline scenario specifies in detail what settings should be enabled / disabled / how it should be configured.

  Because it is a large scale environment, and I know exactly what I need, I would build a tool of mine.  I've used such gpresult and secedit commands to get the settings but I can't get all the settings.  I've already got many settings in the registry, but it works to be a bit heavy.

  Most of the settings I need are in gpedit.msc, services.msc, although I can't get in/out these values by using a script.

  For example -.
  Store passwords using reversible encryption for all users in the domain = on (or off)

  This setting is in gpedit, but I can't find this setting in the registry / other functions of command line.  I noticed that most of the information is readily available in gpedit.msc / services.msc although I don't know how to automate the extraction of these parameters.

  Could you please help to automate the extraction of these parameters?  I want ths process is transparent to the user / server administrator to reduce the interaction required for the information.  A macro will not allow the extraction of these parameters, while the computer is locked.

  I'm looking for Windows 2003, XP and 7.

  Thanx

  Hello

  Your Windows Xp issue is more complex, while we usually answer on the Microsoft Answers site, you can post the question on the link provided below for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• the Terminal Server service is not listed in my box of services.msc need to install NORTON

  try to install norton
  get an error... head to check the status of Terminal Server in the box of services.msc
  I don't have the service Terminal Server that there are listed"

  tried to download a fix msrdpcli.exe and told me there's already...
  yet nothing is done, always nortonless.   Temp AntiVirus installed, if want to my Norton!
  can you help me?

  I have xp/pro w / serv PAC 3

  From a command prompt, see if you can start the Terminal Services Service.

  Type: netstart termservice

  See if the service starts or if you get an error.

  Please let us know.

• Help and support service in services.msc

  When I try and open help and Support under XP, I get an error telling me that I need to start the help and Support service. When I go into services.msc to do this, the help and Support service is not listed

  A service help and Support missing does not fit the symptoms of a corrupt user profile.  Aid and the Support Service is at the system level and does not belong to a particular user, and if you think that your user profile is damaged, you better not delete unless you want to lose all the things belonging to the user that you delete.   This isn't a good way to manage a corrupted user profile or suspicious - unless you want that users angry!
  Have you ever used third-party applications on your system where the product description includes descriptive as sentences:
  cleaner, mechanic, detective, priest, optimize, clean up, tune up, speed up, set towards the top, compact, compress, faster, power, boost booster, guaranteed.
  The Center help and Support sometimes get broken with overzealous cleaning and there are a lot of things to 'try' who sometimes work and sometimes they are not. Sometimes people drop everything simply and never reuse Help and Support Center, but it can still be repaired.
  We can reinstall the missing help and Service support in two ways, let's start with the less complicated:
  Using Windows Explorer, find and locate c:\windows\inf\pchealth.inf.  This is the file for installation help and Support information.
  Right-click on the pchealth.inf file and choose install.
  You may be prompted to enter your XP installation CD as he seeks the installation files.  The files are on your XP installation CD, or, if you don't have any XP installation CD, files will already be on your system from the initial installation (if help and Support was working before) - you just tell the installation where to get them.
  You can locate the files on your system before you begin the installation, so that you know where to say look when he needs a file of installation.
  If you don't have an XP installation CD, change the dialog ' copy the file of ' (by clicking the browse and try again) to point to the folder appropriate for each file.  Usually, the files in these folders.
  dataspec. XML (c:\windows\servicepackfiles\i386)
  pchdt_w3.cab (c:\windows\pchealth\helpctr\binaries)
  HCAppRes.dll (c:\windows\pchealth\helpctr\binaries)
  atrace.dll (c:\windows\system32)
  If these files are not in the same place on your system, you need to do a search for Windows on your system for the file you need and point the installation in the folder appropriate for your system.
  Reboot your system to make sure that the installation is complete and check in Services now to see the status of the assistance Service.
  If the service help and Support does not work, right click, start it and then make sure that the properties are set to auto, reboot again and remember that it starts on its own.
  If for some reason that gets your help and your support Service installed (perhaps you do not find the files) you can follow the other instructions of Riou:
  http://WindowsXP.MVPs.org/Helpsvc.htm

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Windows cannot find 'C:\WINDOWS\system32\services.msc/s '.

  My laptop broke down. I had to restart from my CD. But I have a problem with connecting to an existing wireless network. When you try to configure the automatic configuration service, I followed the steps as suggested. 1. click on start, then run 2. In the box, type C:/Windows\system32\services.msc/s. After this point, a message board appears saying that "Windows cannot find 'C:\WINDOWS\system32\services.msc/s'. Where can I get it?

  Thank you very much.

  Petra

  Hello world

  just to say that I finally discovered.

  I tried setting advanced on my Dell Wireless WLAN Card Utility and even if all my devices possible kept seeig my authetication as 'open' network, it was actually 'shared '. That's all. Stupid isn't. Now, I'm happy that I'm connected and without cable again.

  A big thank you to you all and especially the PML for help.
  P :))

• Component of Windows Installer keeps poping up services.msc tried to stop but he comes back a few seconds, a few times it will not be quick to stop also tried msiexec unreg won't. The following will install manually or with automatic updating.

  Component of Windows Installer keeps poping up services.msc tried to stop but he comes back a few seconds, a few times it will not be quick to stop also tried msiexec unreg won't.  The following will install manually or with automatic updating.

  Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Security Update for Windows 2000, Windows Server 2003 and Windows XP x 86 (KB979909)
  Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2416447)
  Update Microsoft .NET Framework 3.5 SP1 for Windows Server 2003 and Windows XP x 86 (KB982168)
  Security Update for Microsoft .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2418241)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB983583)
  Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 update for Windows Server 2003 and Windows XP x 86 (KB982524)
  Update of security for Microsoft Office PowerPoint Viewer 2007 (KB2413381)
  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86

  Hello

  ·        Since when are you facing this problem?

  Windows Installer service is damaged. I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you follow the steps mentioned below.

  Step 1:

   

  a. click on "Start" and then click on 'run '.

  b. type 'cmd' or 'command' in the box and click on 'OK '.

  c. type each of the following commands, and press 'Enter' after all the world:

  CD %windir%\system32

  Ren msi.dll msi.old

  Ren msiexec.exe msiexec.old

  Ren msihnd.dll msihnd.old

  output

  d. Type "exit" at the command prompt to close the command utility.

  e. restart your computer.

  Step 2:

  Download Windows Installer from the following link and install it on the system and see if the problem is resolved.

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

   

  Method 2:

  I suggest to reset the Windows Update components and then try to install updates on the system and check. Follow the steps mentioned below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  For more reference, click on the link below.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.