Click on the objects again

Similar Questions

• Can I move all the objects again selected layer without clicking hundreds of layer bars?

  I'm working on a complex illustrator file generated by GIS software. He gave me all kinds of groups of clip & road clip - what I really need, it's just to put all the same coloured polygons on the layer of a high level (unfortunately I can't draw all of my polygons in a group because illustrator doesn't pull these objects out of their existing clipping groups, and the card gets screwed completely upward if I release the clipping masks. With simple cards I have no problem Direct by selecting all of the polygons, I want, selecting their layers in the layers panel, then moving them to a new layer. This card is too complex, because there are hundreds of objects and hundreds of corresponding layers (they are not contiguous, or else I could simply click can be done with it).

  
  

  I used select > same > fill type to select all the polygons, I want that on a single layer, but I really hope that I don't have to select all the layers for each item one by one before I can move them to a new higher level layer. Does anyone know if there is a way to moving all the objects in a new layer selected without having to actually click all the layers in the Panel? Completely open to the alternative routes to my desired result!

  
  

  Thank you very much.
  
  

  Of course, after making the selection drag selection (to the right of the layer) icon on the desired layer. This will move any selected layer to the new layer.

  

• Must click on the object to move twice

  Hello. I use Adobe Illustrator CS3 on Mac. I don't know what I changed, but now I have to select two times objects to move them.
  
  I used to be able to select and drag any object with the same click. But now I have to click to select and then I have to click again to move them. It takes a lot of time for me.
  
  Y at - it a setting I can go to change this back? Resetting the prefs did nothing.
  

  I had the same bug, he also appeared in InDesign and Photoshop.

  Well, I Cinch of irradiated software installed, disable solves the problem.

• How to make the object again during the camera movement

  How to make an object are still on a table or a surface while the camera moves?

  I think that to use the path of motion usually but the problem is theres not really a point in the clip that follows well but I know of that other methods are out there... I don't know their

  Keyframe manually there.

  Mylenium

• How to open the tab control, clicking on an object?

  Hello

  I have a problem with labview, you can help me?

  I want to open a control object tab to import goods in a table. but, I want to open, when I click on an object like a tank. (in fact, first of all, it is invisible and clicking on the object, will be visible)

  How can I do?

  I think, I can do it with a push button or a switch with the same size to a tank or any object that I use, but with an invisible color! is it possible or new suggestion?

  Best regards

  
  

• How to stop Office selection icon IE become highlighted when the mouse moves on the object

  When I move my mouse on the screen and it passes over a desktop icon; and I accidentally press right or left button over an icon, this icon is moved from the current position to a different position is determined by when I am is now the button.

  What I would really like is that the selection and highlighting of an icon only would be finished when I specifically on the right or left when right-click on the object. Then to move the icon I would have left, or right click the highlighted

  Hello

  According to the description of the problem, it seems that you are facing problems with the highlight and select the icons on the desktop.

  As the operating system is designed and it is obvious that just by moving the mouse and selecting a folder or icon for awhile Office holding down the button left or right moves the icon or folder somewhere else.

  It will be useful.

• Prevent the timeline to replay a second time click on the trigger

  Hello. How can I prevent the timeline of a symbol to restart when a second time the button trigger and the timeline has already run. I have a line that grows when I click on the button and I want to keep it as. When I click on the button again the line jumps to its original size.

  Thank you

  Add a variable on the scenario of the symbol.

  var a = 0;

  then in your event click in compositionReady use:

  {sym.$('buttonName').bind ('click', funciton ()}

  {if(A==0)}

  sym.getSymbol('name').play ();

  A = 1;

  } else {}

  sym.getSymbol('name').stop ();

  }

  or you could untie your click event

  {sym.$('buttonName').bind ('click', funciton ()}

  SYM.$('buttonName'). Unbind ('click');

  sym.getSymbol('name').play ();

  }

• Helps to remove the object

  
  I have a shape object on a slide of questionnaire I have to remove.

  • I can't click or right click on the object to remove.
  • I can't see the object in the Slide Master.
  • I don't have any special assigned circles that I can see.

  Any thoughts on how to access the object to remove it?

  Thanks in advance,

  A

  You can view previous slides, maybe it is programmed for the rest of the project?

• Detect which object is clicked on several objects.

  I want to make a game where it randomly generates a map, and players can click on the objects in the map. I want something that can happen to this object and I want the game to detect which item has been clicked and temporarily assign a name to this object so that I can do things for this object, I want the name to crush when I click on an object and want to be able to get back what I've done for other objects. Any help would be appreciated.

  Thank you, you me headed in the right direction, here is my result:

  public var target

  public void DirtBlock() {//dirt given birth block

  trace ("SPAWNED")

  this.addEventListener (MouseEvent.CLICK, fl_click)

  }

  function fl_click(event:MouseEvent):void {//dirt clicked block

  var dirtblock:DirtBlock = new DirtBlock();

  trace ("clicked")

  (Event.currentTarget) evidence //traces object that was clicked (object, dirtblock)

  target = event.currentTarget// defines the purpose of 'target' so it can be manipulated

  Target.Visible = false

• How can I make a button (click) animate an object

  Basically, I want to make a button (nextscreen) that animates a rectangle (Film1) once top.

  So far, it does not work, what I'm trying to gives me errors

  for example, I typed

  ---------------

  nextscreen.onPress ();

  function fl_AnimateHorizontally_6(event:Event)

  {

  Movie1.x += 10;

  }

  -------------------

  But it gives me the error

  Scene 1, Layer 'Actions', frame 1, line 12

  1061: call to a delivery method may be undefined, through a reference with static type flash.display:SimpleButton.

  -------------------------------------------

  Apparently once I select my button and Press f9, I'm supposed to see the symbol of the button at the bottom, but I can't do so all my script is on a separate layer named Actions and is in every way

  So I try to use code snippets and when I run my program with this code;

  -----------------------

  nextscreen.addEventListener (Event.ENTER_FRAME, fl_AnimateHorizontally_7);

  function fl_AnimateHorizontally_7(event:Event)

  {

  Movie1.x += 10;

  }

  --------------------

  My object anime but without me clicking the button

  then, that I should therefore add only when I click on the object animates

  Concerning

  If this is the case, then you can do so by clicking the button launch a repeat function, which you can get by using an ENTER_FRAME event listener.

  nextscreen.addEventListener (MouseEvent.CLICK, fl_AnimateHorizontally_7);

  function fl_AnimateHorizontally_7(event:MouseEvent)

  {

  nextscreen.removeEventListener (MouseEvent.CLICK, fl_AnimateHorizontally_7);

  this.addEventListener (Event.ENTER_FRAME, moveHalfway);

  }

  function fl_AnimateHorizontally_7(event:Event)

  {

  If (Movie1.x

  Movie1.x += 10;

  } else {}

  this.removeEventListener (Event.ENTER_FRAME, moveHalfway);

  }

  }

• Click on the boxes with different audio

  Hello!

  I use 5 Cp and I have problems with the audio. Button or box where to click must play an audio short or long after that is clicked on.  In the text, I want to cover some words with boxes click with different sounds, students can click to hear the sounds. in the text, there may be a lot of words I want to cover with boxes to click.  Is it possible to do? If Yes please let me know how.

  Thank you

  Ok.  Who can be a little trickier.  Normally a button or click box has a break point on the timeline and once you click on the object continues to play beyond its break point.  This means that you get only a click... UNLESS... you change the Action when a click to be an advance Action that does two things.  First of all, it does everything you want to take place (for example to read the audio file) and THEN he moves the read head to a point BEFORE the break point so that you get another possibility to click New.

  Blog of Lilybiri has some good examples of this sort of thing: http://lilybiri.posterous.com/

  You may encounter a problem where even after you have everything installed correctly the buttons stop working after a while.  In this case your best recourse would be to use the Widgets event handler instead, these can transform any object into a clickable button screen.  But even better, is that they give you preferences to disable continue and the pass/fail criteria reset after Action so that your users can click on your buttons as often they like to repeat actions, these useful widgets trial versions can be downloaded here.

• Click on the button = stop film

  I try to have a button which directs you to a url, but want the film and audio to stop while the person looking at the URL. I can stop the audio - but does not know how to stop the sequence.
  
  Any thoughts would be appreciated.
  
  Thank you

  Hi sus3135 and welcome to our community

  Examine the properties of the button. Right where you type the URL is an arrow down. Click on this button and you have options. One of these options allows you to open the URL in a new window. Choose this option. Then, click on the arrow again and notice an option which probably overlooked you before. It's called "continue playing project." You must clear this option.

  Don't feel bad if you missed it earlier. It's an easy thing to do, because it is in a disabled state until you choose the new option of the window.

  See you soon... Rick

• Captivate 9 - trying to switch between the States of an object when a user clicks on this object?

  Try to switch between the States of an object when a user clicks on this object? I have successfully used the function of the State of the object to change the object to a different State, but I need it back to its Normal state when it is selected again in the State has changed and then continue to turn every State when you click on it. It is an interaction of flashcard. I can do this using several objects and hide/show, but I would do it with States and unique objects.

  You're talking about custom or InBuilt States. What kind of action do you use: a simple or advanced/shared action?  If you simply switch between two States, use the approach I described in this blog post:

  1 share = 5 buttons toggle - Captivate blog

  You will probably need a user variable to track the status, but you can use the shared conditional action described in this blog.

• Edge animate CC hangs on the right click on any object in the window elements

  Hello

  Whenever I right click on an object in the window elements that animate crashes on me.

  Same thing happens when I click on the button "Open stock" - "{}".

  I would really appreciate some kind of help with this problem, because I am able to do anything in this way.

  I'm running on a MacBook Pro 3.06 GHz Core 2 Duo - OSX 10.9 2010

  Adobe Edge CC downloaded today through creative cloud

  Thanks in advance,

  have a nice day,

  Anne

  I searched a lot, but I think you meant .../appilication support /... and not... / preferences /...

  I've renamed now and has opened the program...

  He did not create a new folder of that type,

  BUT

  the problem seems to be gone for now!

  I'm really happy about that!

  Thank you very much...

  If the problem persists, I will answer here, let me first work a little with one now trying all the possibilities to reproduce the problem.

  Thanks again for your help...

  I'm still confudes how to rename the help file ' 3.0.0"and it rename"Leading Edge"there isn't, since one is inside another

  Have a great day!

  Anne *.

• Click, animate the rotation of the object of + 90 ° using AS3?

  I have a button that will rotate an object to its parent of 90 degrees each time its clicked:

  b_rotate_CW.addEventListener (MouseEvent.CLICK, rotateCW);

  function rotateCW(event:MouseEvent):void

  {

  Object (this).parent.module.rotation += 90;

  }

  Which is fine, but I think it would be a nice touch if the rotation of the object have been animated.

  I tried this:

  Import fl.transitions.Tween;

  Fl.transitions.easing import. *;

  Import fl.transitions.TweenEvent;

  b_rotate_CW.addEventListener (MouseEvent.CLICK, rotateCW);

  function rotateCW(event:MouseEvent):void

  {

  var rCW:Tween = new Tween (object (it).parent.module, "rotation", Strong.easeOut, 0, + 90,.5, true);

  }

  ... but there is no nothing, I'm guessing that "rotation" is an option transaction, I can't find any documentation for it, only x, y, their scale and alpha.

  I'm sure this has been done by many, can anyone offer a useful clue as to how this function would be coded correctly?

  Thank you!

  It's great, I tweaked a bit; replaced the 0 with the current angle of the clip) and now it works perfectly:

  var rCW:Tween;

  b_rotate_CW.addEventListener (MouseEvent.CLICK, rotateCW);

  function rotateCW(event:MouseEvent):void

  {

  rCW = new Tween (object (it).parent.module, "rotation", Strong.easeOut, objects (EC).parent.module.rotation,.parent.module.rotation of the object (this) + 90,.5, true);

  }

  Who knew you can use target a path instead of the value?

  Where everyone can learn AS3 as you know?

  Thanks again for your tremendous help!