Helps to remove the object

Similar Questions

• HP Pavilion g6: Please help me remove the Power On password or administrator password

  Please help me remove the administrator password or power on password. The stop code is: 68478111

  Hello:

  Please see the info on the link below which should solve your dilemma.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/system-halt-error-message-or-BIOS-password-reset-generator/m-p/5010033

• Hoax call on notifications about a virus tries to hijack your computer and ask for help to remove the files?

  OT: security.

  Dear community,

  Did anyone out there contacted by "windows" say you they receive notifications about a virus tries to hijack your computer and ask for help to remove the files? Initially, it was an area code 855, but now the number is unavailable. I get a lot of calls.

  any help would be appreciated

  Thank you

  Hello

  It's a scam.

  Here are the tips that we regularly give the posters who receive these types of calls:

  We have all the errors and warnings in our Event Viewer

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  You are the only person who knows if you gave them remote access.

  If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  See you soon.

• RemovePopUp method removes the object from the display list?

  I'm setting up an AIR application that uses several pop-up windows, and I get as much memory as possible windows pop up closed at each Garbage Collection.  Reading through forums / Articles / documentation, I see instances of object created by pop ups stay in memory (No GC would be) up to:

  -all references to the object are = null (cancelled)

  -all receivers on the object are removed (or are weakly referenced)

  -l' object is removed from the display list.

  My question is:

  Does

  PopUpManager.removePopUp (this);

  remove the object from the display list?

  I use PopUpManager.createPopUp () to instantiate a container to display mx:TitleWindow objects.

  The pop-up closed deletion function, however, I'm not sure if it is 'removed from the display list' completely.

  A simple answer is the best, what moves me in the direction of answering the question. (Also useful: How can I see the objects in the display list at a certain point during execution of the application?)

  Thank you all!

  He,

  Yes, removePopUp removes it from the display list.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• [REQUEST] How to remove the object from the list to display and memory that added dynamic

  Hi there everyone,

  I have a question which I hope you guys can help me with, so the question is:

  
  "How to remove us (sprite object that has an external swf that it is child) display and, above all, of the memory, but we can still use the same variable to add another object (yes another sprite like the one we have removed yet a different content)..,

  I did tried the removeChildAt thing he did remove all the child of the display list, but I still can hear the sound of the video running.

  Here is the code on a small scale of what I do (sorry that I can only give you chunk code loading and adding)

  var SWFList:XMLList; used to contain a list of all the external swf source, atribute and etc.
  var totalSWF:int; the total number of swf external, it must be charged

  var swfLoader:Loader; instance of the loader class to load external swf file

  function loadSWF (): void
  {
  for (var i: Number; i < totalSWF; i ++)

  swfLoader = new Loader();
  swfLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, onSWFLoadComplete);
  swfLoader.load (new URLRequest (SWFList [i], .@source));
  }

  function onSWFLoadComplete(e:Event):void

  {

  this.stage.addChild (e.target.content);

  }

  and also if you can give an example of a good method of dynamic add the object to the stage I would really appreciate cause I suspect mine are bad method.

  Thank you all.

  If you have been publishing for fp 10, just use unloadAndStop().

  I assume you're not publication for fp 10 so you have to use something like:

  function clearScreen (): void
  {
  var mc:MovieClip = MovieClip (swfLoader.content);

  MC.yourflvintheloadedswf.Stop ();

  mc.mcinyourloadedswfthathasalistener.removeEventListener (MouseEvent.CLICK, whateverF);

  etc.

  swfLoader.unload ();
  }

• Helps to remove the name of Troj/DocDl-Princeling

  cursor to the iMac began randomly blinking, not allowing the cursor to stay where I clicked and cycling through and menu bars.  I have installed sophos and it has detected a threat that he labeled as 'Troj/DocDl-AUL', sphos has not removed the threat - and the problems continue at random.  F-Secure, Panda or found Malware threat when I ran drive scan using these different programs.  Don't know what else to do.  Any help would be appreciated. OS X El Capitan 10.11.3 running

  According to this:

  Roj https://www.Sophos.com/en-US/Threat-Center/Threat-analyses/viruses-and-Spyware/T ~ DocDl - D.aspx

  It affects Windows. Do you run Windows? If this isn't the case, it is likely contained in / attachment sent by a Windows user. It shouldn't cause any problems on Mac.

  May I suggest that get rid you of all AV software you have installed.

• Need help to remove the protection of the family off account of girls

  I deleted my daughter from my laptop Microsoft account. I had the protection of the family there. How can I get the protection of the family out of his account because she has another account set up and know it required a code to get on his google account?  So I would like to remove the protection of the family so that it doesn't keep needing a code. If anyone can help me please and thank you.
   
  * This thread has been changed so that they the title is a little clearer. It will be also moved to a more appropriate forum hoping to teach you to someone who can answer your question correctly.  Thank you!

  Hello

  What operating system is installed on the computer?

  In the meantime, you can visit the link provided below to remove a parental control account.

  How can I remove parental control?

  Hope the information helps you resolve the issue.

• Need help to remove the parental permission on hotmail acct. my child

  I configured a hotmail account for my daughter with the security setting for the family and I would like to delete the setting and the restriction that I have previous game on his hotmail account if she can add contacts freely without the permission of the parents.

  I've done an update on my setting under authorization parental permission/manage / my child in which account I deleted my child account but she did not reflect change of hotmail account of my child which again shows his account restricted with parental consent.  I even changed the year of birth of my child and see if it would be useful, and it did not work.

  We would really like to keep his email address, but it becomes so unpleasant to use with the parental permission setting.  Help, please.  Thank you.

  Hello

  We apologize for the confusion, in order to remove the restriction for the child's account, you must configure it on the web using the parent account. To do this, please follow these steps:

  1. connect to http://fss.live.com using the parent account.
  2. click Edit settings under the name of the child you want to remove the restriction.
  3. click on Contact Management, it is located on the left side of the web page.
  4. under management of Contact for the child's name , check the radio button next to the child manages their own contact list.
  5. click on the button Save to update the settings.

  If you want to remove the parental control completely on your child's account, please follow these steps:

  1. connect to http://fss.live.com using the parent account.
  2. click Edit settings under the name of the child you want to delete in Windows Live Family Safety.
  3. in respect of the accounts for the name of the child , click Remove the link next to the e-mail address of the child's account. It is located on the right-hand side of the bottom of the page.
  4. new instant message will appear for box and then click Delete the ID to remove completely the relationship on the account.

  Let us know the result later.

  Thank you.

• Helps to remove the HP Pavilion Desktop Hard Drive

  So recently I bought your desktop HP Pavilion from Best Buy a few months ago. Thing was running great until this morning, when the hard drive has suddenly decided to go belly and FRY on me. I called HP Support and they are sending me a free HD to replace the bad, but I need to remove and return them. No problem, I think I'll open the chassis out. Little I didn't know...

  I really don't know who designed this thing inside, but to reach the screws to remove the hard drive is almost impossible for someone like me who has no specialized tools. I got two of the screws, but the front rear one I can barely see and even less to reach, and I don't know there's a fourth that I can't even imagine reaching. I hope someone can give me something special or a detail that I'm missing that will make this possible, if not, I am at a loss how to proceed.

  Here is the info on the machine:

  HP Pavilion Media Center

  Product: KT334AA-ABA

  Model: m8530f

  If it is necessary, I'll post a picture of her womb. If anyone has any info that can help me to disassemble this beast, I would be eternally grateful!

  -Justin

  Message edited by Justin_D on 02/15/2009 16:40

  You must insert the personal media at the front of the computer player. Remove the front panel, remove the screws which fix the cage of the front's personal media players and pull the Green tab by dragging the cage in the front. You will then be able to easily remove the drive.

  Do not hesitate to call HP, they will be happy to help you with the installation of the replacement drive.

• Help to remove the Blue error screen: 0x0000007e

  Original title; Blue screen - please help

  I'm playing a game recently on windows xp. I keep blue screening after that I tried to load the game. I discovered that what initially is that the user-mode driver framework is a failure. I don't know what it means anyway. my error code is 0x0000007e. Thank you

  Hi, BradMJ,

  How to troubleshoot a Stop error 0x0000007E in Windows XP

  http://support.Microsoft.com/kb/330182

  The Windows User Mode Driver Framework (Wdfmgr.exe) service appears in the Windows Task Manager after you install Windows Media Player 10

  Note The Windows User Mode Driver Framework service is a driver component that is used by Windows Media Player 10. The Windows User Mode Driver Framework service supports synchronization of content with hardware players. For example, an MP3 device is a hardware player.

  http://support.Microsoft.com/kb/892552

  How to remove the Microsoft user-mode driver framework

  http://www.ehow.com/how_5175769_remove-Microsoft-usermode-driver-framework.html

• Any help to remove the virus startnow? Im running Windows 7.

  Hello

  I am running Windows 7 and it seems that I am infected by the bug "startnow.  I get redirected to their page without asking for confirmation.  I was able to remove the program file, but it does not solve the problem.  I found a bit about it on the net, but no corrective measures.  I ran the Windows Security Scanner with no result.  Found a step by step, recommend deleting the [random] .exe in the menu of the process in the Task Manager.  I have not found any such process.

  Any help is greatly appreciated.  Thanks in advance
  Don.

  Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• Help me remove the address bar at my screen

  I sent my laptop in for repair and they reloaded windows 8. However, I now have this bar to address extended at the top of my screen and it does not allow anything else on the screen to go full screen. Browsers, e-mail, photos, documents, spreadsheets, everything appears under the address bar which I want to go far. I have browsers if I want an address bar. I put one on my taskbar. I don't have that on my previous windows 8 (or a person helped me remove years ago and I don't remember). How can I remove it?

  I think that the problem had to do with a browser. Microsoft insisted that I upgrade to 8.1 (gave me no choice, not happy that although I was hesitant for me I need to charge a bunch of applications that does not seem to be the case). Once it is I reload Firefox that I use as my main browser and the problem has not occurred. I can't say with certainty it is Firefox, but this is what I suspect.

• Find that amendments may not remove the object

  Hi all

  The Find/Replace dialog box is adjustable to the object, and I can pick up successfully for objects of open plot line .5pt and stroked with black color. But, I can't delete them.

  Suppose I need to go through hundreds of pages to delete a line of stray path. Find/replace won't! Is there a solution to javascriptable?

  After more experimenting, I shot an existing script that came with InDesign and came with this variant:

  //SelectPathObjects.jsx for InDesign JavaScript
  /*
  2015_02_02
  */
  main();
  function main(){
    //Make certain that user interaction (display of dialogs, etc.) is turned on.
    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
    if (app.documents.length != 0){
    if (app.activeWindow.activeSpread.pageItems.length != 0){
    myDisplayDialog();
    }
    else {
    alert("The active spread does not contain any page items.");
    }
    }
    else{
    alert("No documents are open. Please open a document and try again.");
    }
  }
  function myDisplayDialog(){
    var myDialog;
    //Create the SelectObjects dialog box.
    with(myDialog = app.dialogs.add({name:"SelectObjects"})){
    with(dialogColumns.add()){
    with(borderPanels.add()){
    staticTexts.add({staticLabel:"Select:"});
    with(dialogColumns.add()){
    var myGraphicLinesCheckbox = checkboxControls.add({staticLabel:"&Graphic Lines", checkedState:true});
    }
    }
    }
    }
    myResult = myDialog.show();
    if (myResult == true){
    var myObjectTypes = new Array;
    //Gather control settings from the dialog box and build
    //an array containing the object types to select.
    if(myGraphicLinesCheckbox.checkedState==true){
    myObjectTypes.push("graphicLines");
    }
    //Remove the dialog from memory.
    myDialog.destroy();
    mySelectObjects(myObjectTypes);
    }
    else{
    //Remove the dialog from memory.
    myDialog.destroy();
    }
  }
  function mySelectObjects(myObjectTypes){
    var myCounter;
    var myObjectsToSelect = new Array;
    with(app.activeWindow.activeSpread){
    for(myCounter = 0; myCounter < myObjectTypes.length; myCounter++){
    if((myObjectTypes[myCounter] != "images")&&(myObjectTypes[myCounter] != "epss")&&(myObjectTypes[myCounter] != "pdfs")){
    myPageItems = eval(myObjectTypes[myCounter]);
    if (myPageItems.length != 0){
    for(myPageItemCounter = 0; myPageItemCounter < myPageItems.length; myPageItemCounter ++){
    myObjectsToSelect.push(myPageItems[myPageItemCounter]);
    }
    }
    }
    }
    for(myCounter = 0; myCounter < pageItems.length; myCounter++){
    myPageItem = pageItems.item(myCounter);
    try{
    if(((myIsInArray("images", myObjectTypes) == true) && (myPageItem.images.length == 1))||
    ((myIsInArray("epss", myObjectTypes) == true) && (myPageItem.epss.length == 1))||
    ((myIsInArray("pdfs", myObjectTypes) == true) && (myPageItem.pdfs.length == 1))){
    //Is the page item already in the list of items to select?
    myID = myPageItem.id;
    myAlreadyAdded = false;
    for(myPageItemCounter = 0; myPageItemCounter		   

• my content aware tool is not completely remove the object that I chose

  When I select an object to delete with content aware that he will remove all... it leaves a shadow of the object. I put it on the Normal and 100% opacity

  There is something that I have worked on the right after the College became available.  It is not always doing things, so the trick is to provide only pixels you are happy so he can get the fill of.  So imagine the image below with the floating stone.  Red is a selection marked by the quick mask, I've done very quickly with the lasso tool.  By copying the selection into a new layer and then by selecting the stone and using the CAF, you can be sure that it won't catch the pixels of the bird or gravel to fill the repair area.

  

• helps to remove the encoded html string

  Hello

  I am trying to remove all the html to a user input string.

  something like this:

  < cfset string = "example text & lt;" a & gt; ">

  I tried:

  Replace (string , "< [^ >] * >", "", "ALL")

  Replace (string , "& lt; BR & #x2f. & gt; (' > ', ' ', 'ALL')

  Can or remove the html code, someone help?

  Functions related to the replacement of strings using regular expressions are REReplace and REReplaceNoCase. For example,.

  #REReplace(string, "<[^>]*>", "", "ALL") #