Clip/window source moved to 170 individual clips in the project. Advice please?

Similar Questions

• Reset to point to the clips in the project

  I was under the assumption that the items in the project Panel were the main elements (original not without effects) and by dragging to the timeline creates new versions of the master clips as subclips.

  I have hundreds of clips in my project Panel that caught the points of entry and the previous cut.  How can I reset this for that drag these clips to the timeline add all the clips... not a cut version.  I can deal with each element individually and to extend the entry points and but is not something I want to do hundreds of clips.

  Hey guys,.

  I don't know if this has been answered, because the wire is long enough, but you CAN reset it in/out points for clips in the project. It was a feature of 7.0.1. To do this, you simply select the clips in the project Panel and press the shortcut key for clear in or out (Opt i/o) or clear in AND out (Opt X).

• Play and rename the clip in the project Panel, using only the keyboard

  I want to use my keyboard to navigate through the items displayed in the thumbnail view in the Panel project (pictured below), play these clips and rename these clips. Already, I am able to up, down, left, right keys to navigate and can press ENTER to rename the clip. However, the space bar does not play the selected clip unless I use my mouse to click on it.

  

  I really want to avoid using my mouse in this process. This will greatly enhance the convenience of crosses a lot of clips and visualizing and renamed.

  Someone at - it suggestions? Open to workarounds or other ways to skin this cat.

  It is a problem I always had with first - I think that it is not a solution, but I wanted to ask the community to see if someone has found a way.

  Using Mac OS X 10.10, latest version of first CC

  Hey mammolastan,

  I don't think there is a way to play a clip with Sapcebar in the project without first Panel by clicking on it. You should have a demand: feature request/Bug Report Form

  There is a work around using only keyboard shortcuts, if you are interested. I prefer this workflow myself because you have to make the thumbnails big enough so that they can be useful, in my opinion.

  If you have already said, you can navigate with the arrow keys, press ENTER to return to rename and move to another clip or enter on the numeric keypad to not go to the next clip. When I do what you, I open my clips in the Source monitor and view them there, air conditioned and have no mice. SHIFT + O is the default shortcut to open an item in the Source monitor, but I've changed mine to Cmd + down arrow (as OS X). Then you can shuttle, set in/out points, make markers, etc., and then when you go to your next video you press SHIFT + 1 to return to your project Panel. It's more shortcuts, Yes, but given that you are looking for a KB option-driven, I feel you're fast enough with your fingers, and once you do it a few times, it is true no big thing at all.

• Addition of pe11 edited clips for the project time line

  I have worked on a project for a while, but then decide to separate parts of the project and save them in the order of their addition to the original at a later date.

  I've now reached that point, but is not only a simple PE! program seeks to close before opening another I tried to get the clips in the items section with no joy.

  I'm sure there must be a way to do it, but I can not find

  Help, please

  Brookes49

  What operating system executes your 11 items first?

  You can have only one project first 11 open both elements. You can save that work and open a new one.

  Cannot open a project file (file project.prel) in another.

  If you have 1 projects and to save its chronology or a part of it to a file for import into the project 2, then

  a. for any chronology, you're going to publish + Share/computer/select a choice of export compatible with your workflow.

  c. for a part of the timeline, you set the gray tabs on the work area bar extend over the area you want to export the second... must do when

  you get to publish + Share/computer/for export, you must have a check mark next to the "hand work area Bar only.

  Then you take the export of 1 project, open the project 2 and import export 1 2.

  Please review and consider. We can refine the details if necessary.

  Thank you.

  RTA

  Add on... If you are using a Windows computer, we might be interested in using ClipMate jointly with Premiere Elements to an insert of copy/paste

  between the projects

  First Elements ATR troubleshooting: PE: ClipMate copy/paste between projects

• Can I sort video clips in the project Panel chronologically?

  Hello. The refernece on all of my recent video clips is followed YYYYMMDD to another digits.mpg 6 this is a total of 14 digits with the last 6 digits very random. I have hundreds of clips.

  When these clips are in the PR CS5 project Panel, they are not in chronological order, also is very slow work trying to edit in the correct time/date taken.

  My video references have previously followed M2U to a 5-digit number which was very easy to sort for editing.

  Hope someone is able to help me here. I might have to rename the clips digitally before their trip to Premier Pro.

  Kind regards. Janice

  In the bridge: display/sort/by Date of creation, then select all and go to rename tool in package.

  Many names of clip 14-digit does not sound easy to handle first, at least for me.

  I prefer a unique name with an ascendant 2 or 3 digits.

• You can 'favorite' clips and have an option to display the clips in the project Panel are currently in a sequence?

  Someone at - it ideas on the above questions?

  You can set how folders open in preferences.

• How to get clips in alphabetical order in the project window

  When I have all my clips in the project window in the mode 'List', they are in alphabetical order.  However, when I go to view "icon", they no longer in alphabetical order.  How can I see them in "icon" view in alphabetical order?

  Press the sort at the bottom left of the project Panel, and then choose the desired sort in the menu order drop-down.

  MtD

• Prelude CC 2014 - clip moves within project take a long time

  After ingestion, marking and by creating subitems for my project, I proceed to move all original without name of clips to a subfolder called 'RAW' in their original folders. This process of moving the clips (after several clip selection and dragging them to the new folder) takes a few minutes where I get nothing, but the beach ball of rotation (on Macbook Pro installed OSX 10.9.4 retina) and a quite insensitive application. How long the wait is directly proportional the number of files that is displaced (e.g. spend two clips is almost instantaneous, move 30 takes five minutes), the program comes back online then, but I do not understand why it takes so long just to move clips. He rebuilt a database which it considers an essential task to move clips? Thank you!

  Hi RiffraffDC and Rob,

  Sorry for your problem. I have looked into this issue (with about 1250 media files) and it rated in the following scenarios:

  1. move these clips in the project Panel in a locker: Instant (no problem)

  2. run these clips of bin Panel House project: problem prelude becomes unresponsive(spinning wheel)

  3 move clips from one location to another bin: new problem; Prelude becomes unresponsive(spinning wheel)

  I refer to the question within my team. We will certainly consider this.

  Meanwhile, it would help, if you move clips in different trays l ddirectly from the component of the project. It works very well, but every time that the clips are within other bins and tried to be moved, prelude does not respond well.

  It will be useful.

  Thank you

  Mayjain

• Organize Clips edited in project using first Elements 4 Panel

  I use first elements 4.

  When I edit a clip in the timeline or in the Panel Monitor is possible now to put the clip in the project Panel and collect clips edited it the Assembly subsequently. I used Canopus Edius and you can assemble the clips in what is called the tray and then get back on the timeline.scenceline subsequently, makes for a nice workflow.

  I tried several times to drag the clip edited to the Edit/project Panel does not. I read the Help menu but it does not really address it.

  I'm not under any other software while doing this, I'm on 2 years, Dell with vista just FYI.

  It seems to me you can edit and place in the Panel project for later installation on timeline would make sense as a workflow? I looked at all the menu drop-down menus to try to move them as well but no luck?

  I know it must be something really simple anyone can help?

  We do a lot of editing on Edius but it's our backup system and we would like to do a simple task as described above. We then export them to a quicktime file and use the clips in another software called Proshow gold.

  All ideas are welcome.

  Thank you

  Pre 4.0 (may differ in future versions), Dbl-Click the Clip to open it in the Source monitor, set the Points In & Out, then drag it to the project Panel, where pre will give you the opportunity to appoint subclip trimmed.

  Hope that helps and welcome to the forum.

  Hunt

• How to identify the clips in the finder that are used in the scenario?

  Heya, this is my first post on this forum and a question ive been struggeling with during some time...

  I am trying to store my images and reduce the amount of HARD disk space old projects are taking place. I have a LOT of images I will ever use again saved in the folders I want to easily identify and get rid of. Is it possible in first pro to 'tag' files that were used in the Assembly or the project, and then I can just go and remove those who are not. Similar to the sequels feature that removes the unused clips in the project (although their leaves still on the disc).

  It also would make transcoding the right files much easier that I currently have to identify each of them individually using the show in finder option...

  help on this would be highly appreciated

  I use CS5 on macbook for editing images canon DSLR, is there more information you guys need?

  See you soon

  Rich

  In the project Panel, click the drop-down; It's the small pile o ' thing of pancakes in the upper right corner of the Panel. Select "display metadata." In the search box, type 'use' - this will reveal the labels of metadata using video and Audio. Check those to add and click OK. they will now be added to the columns in the project Panel. Now, you can sort on the filter columns used - unused clips will not have a number associated with this column. Select them all and if you really want to purge them of the drive, press Ctrl / Cmd + delete - that will remove the media from the drive.

  If you just want to get rid of the clips, project > remove unused will do.

• How to apply audio and video transitions automatically when drop several clips to the timeline?

  If I remember OK, in first previos versions, it was possible to drag multiple Clips in the project area to the timelineand apply automatically audio/video transitions.

  It is possible to configure how many video images will overlap to a default value of transitions (and for audio, too).

  Is this possible in first CS6 to do the same thing?  Leave me a link to the documentation or a hint, how to get this thing done.

  I searched the documentation, but I have not found.

  Thanks for the tips.

  I believe that the function you are referring is automate to sequence. In CS6, it is in the project Menu. for those who use the CC, it's in the Clip Menu.

• Find a Clip on the Timeline in a sequence

  I have little 80-100 clips in a sequence and want to find quickly when, in a sequence, the clip is.  Say this is clip MVI_1570.  I would like to locate it and replace it with a better clip.  Of course I can rub it slowly through the sequence of 90 minutes, but I was wondering if the Organization had a search function for sequences (as it does in the project and effects tabs/monitors).  And I recognize that pieces of MVI_1570, for example, can appear several times in the sequence and I want to reported to each occurrence.

  Search for the clip in the project Bin Panel and occurrences of the element in the timeline (sequence) will be shown in the whirlwind to the bottom of the triangle next to the small monitor.

  Click on one and need you to the occurrence of the element.

• Unable to access video clips of the external hard drive

  I've been using PE9 for six to nine months.  My normal workflow was to create a separate project on a 500g external hard drive. This file contains all the video clips (.mov files) and the Project.PREL file.

  This great worked until recently.  I can bring is no longer the .mov clips in the project schedule or sceenline from the hard disk.  By using the command 'Get Meda' a 'unfinished' file is downloaded, and when I try to drag the clip to the timeline, the program asks me where the file. Something has changed - and I don't know what or how to fix it.

  

  The image above comes from a project where I'm having this problem.  The clips that have images in them are downloaded from my portable hard drive.  Others come from my external hard drive - and those are the ones that the program cannot "locate."  That's what I'm trying to figure out how to fix it.  Yet once, this suddenly started happening - so somehow I changed something, I think.

  The same clips can be imported when they are stored on my hard drive.  When I try to import them when stored on a video card, the video importer PRE opens and I can bring them to the program in this way.  However, these are not viable alternatives for me.

  So what has changed, I can't determine.  Is there a setting, codec or something that I can study that this would cause? As I said, this just started happening?

  In addition, some previous projects to open correctly and some may not find the files - even if they are all stored on the same HD 500 g.

  Help, please.

  This ARTICLE will give you some general tips on editing of external HARD drives.

  My first guess would be just like John T - outside drive letter has changed in the operating system.

  Good luck

  Hunt

• I can list other metadata fields in the project window?

  I would like to add a few columns of metadata in the project list, such as the custom field I created on ingest, or the Description field. It doesn't seem possible, but I can't imagine why not. The main reason is so that I can scan a list of the files view and identify items that have a specific piece of metadata (for example the comment: "good catch")

  Thank you.

  Scott

  Hi Scott,.

  Thanks for your post. Prelude does not currently provide the ability to control the columns displayed in the project Panel. You can search all the metadata that may be on your clips and the project Panel will filter for you.

  By example, if you search for "grip" only those assets with this metadata will appear. All others will be filtered and discarded. You can then organize by selecting all the results of the search (CTRL + A) and by dragging the icon again bin. This will create a sandbox and move all assets

  The Prelude API offers the ability to dynamically add columns. But this requires the drafting of an HTML table and other codes. Probably more than you want to undertake. The API was designed more for integrations with MAMS and other web services.

  We seek to strengthen our capacity to project sign but nothing to announce yet b

  Thank you

  Michael

• Open Source Clip in the Source (Match Frame) window

  Sorry for this stupid question, but I m missing a button or a shortcut to open a calendar-clip in the source including Mark window and.

  One of several reasons: I have to replace a lot of audio-channels between mono and stereo.

  Thank you

  Reinhard

  Post edited by: Kevin Monahan

  Reason: to include the phrase "game frame.

  Position the read head, select the clip, and then type the 'f' key

  MtD