CloudClient avoid the constant re-opening

Hey all,.

I posted a discussion yesterday that included this question as well. But as I understand all the other parts and it is one that I can't know I posted a new discussion.

Hope it's ok

whenever I call customer cloud with settings in the user interface (even in the same session) it keeps connect you (even though it says persistent). example:

(the parts in RED are ruining my output (impossible to analyze the result after him) and it is not necessary. are there switches or ways I get the results without loggin in every time and desplaying java.version cloudclient?)

CloudClient.bat list of catalog vra - JSON format

Java.version

CloudClient connects to the vRealize Automation with persistent session

vRA 7.0 connection: [ACTIVE], session: [ACTIVE], sessionKey = [default] user = [me], server = [https://myserver], [vsphere.local] =

CloudClient is logging in IaaS with persistent session

IaaS Model Manager login: [ACTIVE], session: [ACTIVE], sessionKey = [default], user [I] = Server = [myserver]

CloudClient connects to the vRealize Orchestrator with persistent session

Connection VCO: [ACTIVE], session: [ACTIVE], sessionKey = [default], user = [[email protected]], server is [myserver]

[ {

'reminders': null,

call the same command again: is it possible to ignore the whole red exit?

CloudClient.bat list of catalog vra - JSON format

Java.version

CloudClient connects to the vRealize Automation with persistent session

vRA 7.0 connection: [ACTIVE], session: [ACTIVE], sessionKey = [default], user [I] = Server = [https://myserver], [vsphere.local] =

CloudClient is logging in IaaS with persistent session

IaaS Model Manager login: [ACTIVE], session: [ACTIVE], sessionKey = [default], user [I] = Server = [myserver]

CloudClient connects to the vRealize Orchestrator with persistent session

Connection VCO: [ACTIVE], session: [ACTIVE], sessionKey = [default], user = [[email protected]], server is [myserver]

[ {

'reminders': null,

Thanks for any help!

Kalli

Update: open a folder with VMware and CloudClient 4.2 there is now a change (not documented in release-ntoes).

If you enable suppress.status.messages (set it to true) in the cloudclient.config file is %UserPATH%\.cloudclient file now, it works as well for these newspapers villain in messages.

So, for example if I do now:

"cloudclient vra happy list - JSON format ' in commandhsell I get the result I want :-D

It always connects every time that delay the order of 20 seconds, but good. at least I can now use it in scripts

old (4.1 and earlier)

VRA CloudClient.bat retail machines - id $machineName - JSON - $exportPath export format

#output result of file (like I said... clumsy)

$machineDetail = (get-Content - path $exportPath). ConvertFrom-json

#check for a specific property

$PropertyValue = $machineDetail.properties |? {$_.name - eq $propertyName} | Select-Object - expandProperty value

4.2. possible (because it only generates JSON no other recording!)

$machineList = cloudclient.bat vra machines detail - id $machineName - JSON format

#YAY!

$machineDetail = $machineList | ConvertFrom-json

#check for a specific property value

$PropertyValue = $machineDetail.properties |? {$_.name - eq $propertyName} | Select-Object - expandProperty value

Tags: VMware

Similar Questions

How to avoid the db pending opening to restarting the machine
Hello

Whenever the physical network server restarts (on which runs the database pending), the database is opened in read-write mode. so I question:

ALTER DATABASE RECOVER MANAGED STANDBY BASE DISCONNECT FROM THE SESSION.

Is it possible to handle so that the backup database is always receiver journal mode, whenever the physical networking server restarts?

Thanks in advance.

HAFAS
s/n put wrote:
Hello

Whenever the physical network server restarts (on which runs the database pending), the database is opened in read-write mode. so I question:

ALTER DATABASE RECOVER MANAGED STANDBY BASE DISCONNECT FROM THE SESSION.

Is it possible to handle so that the backup database is always receiver journal mode, whenever the physical networking server restarts?

Thanks in advance.

HAFAS

What is the OS you're talking about?
What is your Version of the database?
As said by Agnes, Standby does not start mode reading & writing, it can open only read-only mode.

If you have planned automation script, then disable it.
If it is windows, then reconfigure service using the oradim - startmode, or in regedit , you can mention auto-start or it can be enabled or disabled. ORA_AUTO_START... not sure about this clause, please check.

How to avoid the pictures to open automatically?

Whenever I insert a SD card to download images Photos 1.2 app automatically opens.

Quite annoying especially because I use this app at all.

How can I avoid pictures opens automatically?

Thank you!

Photos doesn't have an option to disable the launch of all devices.

When the Import Photos Panel opens, you should see a check mark in the toolbar 'Open pictures for the device'. Clear this check box and Photos should not open again for this device (until you reformat the card).

The automatic launch can be disabled for each camera separately.

You can try this fix: this Terminal command allows to disable auto-start for any photo application, not just Photos.
- Photos of quit smoking and unplug any camera.
- Open a Terminal and paste this command and press return:
defaults write currentHost - com.apple.ImageCapture disableHotPlug - bool YES
- Restart the Mac. It is not necessary, but it worked for me after the reboot.
I found this fix in a post of JadedEye ( leonie)

https://discussions.Apple.com/message/29506561#29506561

I am trying to open a simple HTML5 document containing MP4 video without result. Why the same document open in, for example, Chrome?

Small sample code (with delimiters modified to avoid the parking) which opens in Chrome but not im FF5.0:
```
<!DOCTYPE html>
<html lang="en">
<head><meta charset="UTF-8"><title></title></head>
<body>
<video controls src="videofile.mp4">
</video>
</body>
</html>
```
The above code file and the video file mp4 are in the same folder.

Firefox does not support MP4 via the video tag.
- https://developer.Mozilla.org/en/Media_formats_supported_by_the_audio_and_video_elements
- https://developer.Mozilla.org/en/Configuring_servers_for_Ogg_media

Avoid Firefox 2 tabs opening on the first time

Hello

For internal use at my workplace, we use a custom, Firefox
Everything is ok on the fact that the first time, opening custom Firefox on a PC,.
When no profile folder is existing, firefox opens 2 tabs.

And after that first time everything is ok, I think that it comes to the tab 'welcome. '
What can I do to avoid this tab open.

It is our user.js file to overwrite the prefs.js.

If I remove the
"user_pref ("startup.homepage_welcome_url"," http://10.10.10.11:8008");") "
It tries to open the mozilla homepage

user_pref ("startup.homepage_override_url", "http://10.10.10.11:8008"); ")
user_pref ("startup.homepage_welcome_url", "http://10.10.10.11:8008"); ")
user_pref ("javascript.enabled", true);
user_pref ("app.update.enabled", false);
user_pref ("browser.startup.homepage", "http://10.10.10.11:8008"); ")
user_pref ("accessibility.browsewithcaret", false);
user_pref ("browser.cache.disk.enable", false);
user_pref ("browser.popups.showPopupBlocker", false);
user_pref ("browser.cache.memory.enable", false);
user_pref ("browser.shell.checkDefaultBrowser", false);
user_pref ("browser.backspace_action", 2);
user_pref ("privacy.popups.disable_from_plugins", 0);
user_pref ("privacy.sanitize.sanitizeOnShutdown", true);
user_pref ("update_notifications.enabled", false);
user_pref ("browser.tabs.showSingleWindowModePrefs", true);
user_pref ("accessibility.browsewithcaret_shortcut.enabled", false);
user_pref ("plugins.hide_infobar_for_outdated_plugin", true);
user_pref ("extensions.blocklist.enabled", false);
user_pref ("browser.newtabpage.enabled", false);
user_pref ("browser.newtab.url", "http://10.10.10.11:8008"); ")
user_pref ("browser.tabs.autoHide", false);
user_pref ("zoom.minPercent", 100);
user_pref ("zoom.maxPercent", 100);

Thank you.

Hello NiteSupport, please try to replace these two lines in your user.js file:
```
user_pref("startup.homepage_override_url", "http://10.10.10.11:8008");
user_pref("startup.homepage_welcome_url", "http://10.10.10.11:8008");
```
with this line instead:
```
user_pref("browser.startup.homepage_override.mstone", "ignore");
```

Avoid the news since Acrobat messages when it is opened to broken PDF document

I use Adobe SDK to check and fix a bunch of PDF files
Dim avDoc As AcroAVDoc = Nothing Dim pdDoc As CAcroPDDoc = Nothing Try avDoc = New AcroAVDoc() If (avDoc.Open(sourceFile.FullName, String.Empty)) Then pdDoc = avDoc.GetPDDoc() RemoveIfExists(destinationFile) CreateIfNotExits(New DirectoryInfo(destinationFile.DirectoryName)) pdDoc.Save(3, destinationFile.FullName) pdDoc.Close() avDoc.Close(1) Return True End If Return False Catch generatedExceptionName As Exception Me.logger.Error(String.Format("Error while converting {0} to {1}. The error message: {2}", sourceFile.FullName, destinationFile.FullName, generatedExceptionName.Message)) Me.logger.Fatal(generatedExceptionName.StackTrace) Return False Finally If (avDoc IsNot Nothing) Then avDoc.Close(1) End If If (pdDoc IsNot Nothing) Then pdDoc.Close() End If End Try
But when I try to open the PDF file that cannot be opened for any reason, the information message
How to avoid this?

Open the document as a PDDoc first, then convert to an AVDoc. Use an error

Manager to trap the error that is thrown by the Open when call the file

cannot be opened.

pdDoc.Open("c:\test\dummy.pdf")

pdDoc.OpenAVDoc (' ')

Karl Heinz Kremer

PDF acrobatics without a net

PDF, training software development and much more...

[email protected]

http://www.khkonsulting.com

How to avoid the annoying little window which opens when I go to close a case?

When I put my cursor close to the x of a file tab to close a folder, a small window opens on the x and I have to wait to disappear before
I can click on the x to close the file. The window that opens has the exact same text on the file tab and seems worse than useless. Is it possible to disable it?

You can turn off 'Show ToolTips' in the preferences (Ctrl + K), Interface (Ctrl + 2), General section.

My ToolTips also do not overlap the close button, in fact the ScreenTip says "Close" when the mouse is over the button, but if you rest a little above the bar, it will display the name of the document. Sometimes the ToolTips much annoy me because I work with floating windows and often paint on the edge of the canvas that causes tool tips display when the image fits in the window. When displaying tool tip, I can't click with the brush top.

Prevent the app to open the window to open the file

Everytime I open applications like QuickTime and preview, the window open a file keeps popping up. How can I stop this from happening? Thank you in advance!

It's because he doesn't know what file do you want to display. The only way to avoid this is to open the file, and if the preview is not the default, then click right and in the menu, choose Preview. It is the same with TextEdit, and many other applications.

Multiplying the Windows Mail open

When I open the Mail, it begins to open dozens of windows until I force quit. I need to access the preferences (to change my default mail client), but I can't due to the constant proliferation of windows preferences. What is the cause to do it, and how to stop?

Please quit the application. Force quit if necessary.

He raises in holding down the SHIFT key and clicking on its icon. This action prevents the last State of the window to be recharged.

Subvis call go dynamically within an exe file (avoiding the error 1003)

Hello

I use an architecture where the main program (compiled into an exe) can be supplied with a user-'plugins', which are collections of screw types inside a folder named especially compared to the exe. They can be called in the exe via 'open reference vi' provided by the corresponding strict vi types and corresponding relative paths.

I want to avoid having to include one of the plugins in some way in the application builder, because users must be able to create own plugins that the request is totally ignore during the generation.

In principle, this approach works rather well, since these plugins are not extremely complex, but sometimes, I get an error 1003 when loading a plugin.

I have read many old posts on this error in this particular situation, mainly using versions of LV 7 or 8 (I use 2012). It was suggested to build a source distribution for each plugin, including everything that is used from vi.lib, instr.lib and user.lib. Indeed, it helped in my particular case - however, it bloats the plugin 'distribution' (which consists originally only a couple of the screws of the user) extremely and complicates the development user side.

Now some good plugins run from in the exe without having to build a distribution source for them (they still use many vi.lib live) while others don't, and I have no idea why...

These plugins are wrappers for hardware drivers that allow to control any hardware instrument within the main application via a certain API. So, in a particular case, a plugin that produces the error 1003 uses VISA series features (everything inside... \vi.lib\Instr\_visa.llb) and one without error doesn't (yet he uses several features of... \vi.lib\Utility\...).

I can solve VISA problems in a simple way by including (only) the VISA-vis opportunity (and typedefs) inside the plugin folder and explicitly link to them (i.e. replace the VISA-vis of vi.lib with those copied to the folder of the plugin - I guess that's also what the source distribution).

However, I'm confused why certain plugins with work of related vi.lib while others screws produce an error 1003 unless these special screws are explicitly distributed and connected with them...

Oh and just for completeness: all plugins are working fine if the callee in the development system, the problem occurs only if called from an exe file.

Novgorod wrote:

However, I'm confused why certain plugins with work of related vi.lib while others screws produce an error 1003 unless these special screws are explicitly distributed and connected with them...

Oh and just for completeness: all plugins are working fine if the callee in the development system, the problem occurs only if called from an exe file.

Do plug-ins that work depend on the screw in vi.lib who are already part of your executable file because the main program uses these same screws?

All the screws that your plugin needs must be available, if applicable can mean to be already loaded into memory (for the main of the application or another plugin), or can be found on the disk and load. An executable includes all the screws of vi.lib - it includes only those he uses (and the screws that are marked always 'include' in the build specification). I suspect that the plugins that work only dependent vi.lib screws which are also used by the main executable file.

TS4.1 WinXP SP3, IDE slow response * only * if the mapped drive open in teststand... file?

I have a strange situation here. First of all, I must describe the system:
- 2 machines both with TS4.1 IDEs installed Win XP SP3,
- Machine 1 has logical file of common sequence, which is shared with the two machines via a drive mapped "T": sequence files are in 'T:\Logic '.
- Both machines have paths of research with the root t: as the last path in the search list.
Mounting on machine 1 is fine - seq files can be opened in teststand, sailed around, etc. without any problems.

However, on machine 2, the IDE behaves normally ONLY if you drag the following files to change or double-click to edit. As soon as you open a movie file using the open a TestStand sequence file dialog box, click anywhere on the IDE creates a large volume of network traffic and the IDE "hangs" for a few seconds (I've seen as long as 5) and is completely insensitive (there is a direct correlation between the 'pic' termination of network traffic and the TS IDE becomes sensitive).

I did a netstat - ano queries and I don't see new ports opened upwards, so all this is paid by the regular windows file sharing link. If I open directly from the w: drive, it is also the...

-This problem is not continuous: he has been fine for several weeks and came back yesterday. I was lucky enough to find the "do not open any files from within teststand" workaround and continue working normally.

If you have opened a file in the application, then you exit TS and restart it and all is well again.

Any ideas? It is UNBELIEVABLY BORING.

This is probably the problem. Subdirs, especially on a network drive to the research should generally be avoided.

I would recommend against using the options "search subdirectories", even in the case not connected to the network, since then, not only can it lead to performance problems, it can make unintentionally using the incorrect module because the module where you want to say, if you come to specify the name of the file and rely on the recursive search could be ambiguous and have several possible matches. It is best to use a fixed search with a partial if possible relative path directory. For example, if your search directory is c:\mc-tas and you want to refer to a module in GIP\LLB, you can simply specify GIP\LLB\Mymodule.llb for the path in your steps and you would then not need to c:\mc-tas a recursively searched subdir.

Hope this helps,

-Doug

How to prevent a TCP connection that is closed when the VI who opened it terminated.

Hello everyone.

I'm developing an application based on the servers and clients communicate through TCP in LabVIEW 2012.

When the Server/client opens a TCP connection, it starts an asynchronosly running "Connection Manager", to which connection reference that takes so all communication happening. It all works very well.

-J' have a situation where a client connection manager can be informed of another 'new' server. I would like to open the connection (to see if it is still valid) and then pass this reference of connection to the main client code to spawn a new connection manager. This avoids lock me up the Client code main with an ish timeout if the 'new' server does not really accept connections.

The problem is that if the connection manager that opens the connection to the 'new' server is stopped, then it seems to destroy the reference he opened. This means that the other connection manager that has been happily character with the 'new' server has closed TCP communications (I get an error code 1 on an entry).

I created an example to illustrate the issue which should be used as follows:

1 run server.vi - he will listen for a connection on the specified port on his comics.

2. run Launcher.vi CH - it will open a connection to the server and pass the TCP reference to an instance of connection Handler.vi, which he started.

3. the connection manager needs to send data to the server

4. stop the Launcher.vi CH

5. the will of Handler.vi connection error.

Any suggestion would be appreciated.

See you soon

John

Do not perform the opening and closing of the TCP connection in Subvi. Do this to master VI.

duplicate images and edit the constant programmatically

Hello

I want to create something like this:

It would be a few thousand. I tried to do with the script method. There are other things that I do in vi (and in the structure of the case... "It's just an oversimplification), so I don't want to create a new vi, but rather, after the opening of a reference to an existing vi, I would:

1. find the structure of matter (what I can do as well)

2 duplicate a frame (no problem)

3. find the constant (can't get this part)

4. change its value (not there yet)

script_processv2.VI is supposed to change the structure of matter writearray.vi. Tell me where I'm doing something wrong.

Thank you

Oh and just so I'm not accused of being 'useless', attached is a way as to how you can actually make someone come and decide that they need a few hundreds of cases and should want to know how to use the script for the case the duplicate items. Note that the writearray has been changed to rearrange the elements of the case.

Why the report designer opens all of my excel files?

My application uses vi in the report generator toolkit to continually save data to an excel spreadsheet (in fact, several worksheets in the same file). It works fine, however, the problem comes when we try to open/view all log XL files previously created (or _any_ other file XL by the way), because it is basically impossible to read the file due to the constant blinking/flashing XL writes in the log file. If you make the mistake of close open files, the firm application of logging (may be able to intercept this error, but didn't think of it yet). Also, when you start closing records in XL, it seems that he opened to all (or almost all) of files in at least the log folder, but in other (some) places as well. The bottom line which is the only way we found to process view, all the files of log XL is to stop the application - which is not really acceptable.

I'm under LabView 2011, in development (OS Win7) and executable mode distributed (Win Server 2008 R2 OS) and see the same thing. I searched the internet and OR support site hi/lo for clues, but if none of them worked (XLSTARTUP, etc.).

I have several other applications that use log files, and in all cases we can open/close the files of active log (read-only) with no problems. Does anyone have an idea of what could happen here and how to fix it?

Thank you

Mark-san

Charlie,

Well, I thought to use scripture to the SS... but I have not seen an easy way to manage multiple worksheets. Would need a separate file for each worksheet?

Although I love the .csv format since it is essentially text (readable), I think the TDMS format may be better suited due to the structure of the channel - think I can use one channel for each worksheet (?). But can I open a TDMS (read-only) file then it is written to, and then create the desired output of Excel (snapshot) from there?

Mark

Add content to the constant of typedef

I created a typedef strict compelled constant references to the controls and indicators which makes a .ctl file. Now I wish to add control references to the typedef but can not understand how... I tried to add new references to command directly to the constant of typedef. The operation has failed. I also tried opening the typedef that opened the .ctl file. It was also a non-starter, as you can view the front panel, which means that I can't add references to the constant of a typedef ?

Any ideas?

Stroke

I'm not sure what you're trying to do, if you want to change your typedef (add - modify controls remove him) then of course, you have to open it, you make changes and save. then changes will be propagated throughout your soft everywhere where you the typedef is used.

The fact that you want to add a control reference control to your typedef does not alter.

Typedefs isn't a block diagram and allows you to add a Ref control to your typedef, you can do it from the front panel, just go you are the appropriate palette (Refnum)

Hope this helps

CloudClient avoid the constant re-opening

Similar Questions

Maybe you are looking for