Code temporal list/table to generate the sequence?
I have a list of time codes based on a sequence of clips, essentially all of the dailies less certain camera wobbles.
I want to generate a new sequence of this temporal/worksheet code listing without having to manually change. Any ideas?
Once you could just drill timecodes in FCP7 and the system would recover the band/clips using the list of timecode.
Thank you
Jay
It's the bit by hand as I try to avoid.
We get that. I don't think it's possible.
Tags: Premiere
Similar Questions
-
Can any body help to get a script that can generate the sequence (length 3) with a combination of numbers and characters example: T11... TA1... TZ9... then on
With the help of the clause type
Select sqnc
from (select sqnc
from (select 'T00"sqnc, '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ' ordr
of the double
)
model
size of (0 I)
measures (sqnc, ordr, length (ordr) len)
rules iterate (1300) until (instr(sqnc[iteration_number],'~')! = 0)
(sqnc [iteration_number] = case when sqnc [cv (i) - 1] is null
then sqnc [0]
of another substr (sqnc [iteration_number - 1], 1, 1) |
-case when substr (sqnc [iteration_number - 1], 2, 1)<=>=>
so when business substr (sqnc [iteration_number - 1], 3, 1)<>
then substr (ordr [0], instr (ordr [0], substr (sqnc [iteration_number - 1], 2, 1)), 1)
of another nvl (substr (ordr [0], instr (ordr [0], substr (sqnc [iteration_number - 1], 2, 1)) + 1.1),'~ ')
end
end |
-case when substr (sqnc [iteration_number - 1], 3, 1)<>
then substr (ordr [0], instr (ordr [0], substr (sqnc [iteration_number - 1], 3, 1)) + 1.1)
else ' 0'
end
end
)
)
where instr(sqnc,'~') = 0
Concerning
Etbin
-
How to generate the sequence Island-1, -1, 1, 1...
How to generate the sequence Island-1, -1, 1, 1...This seems to work:
create sequence sss start with -1 increment by 2 minvalue -1 maxvalue 1 cycle nocache;
-
need help to generate the sequence
HII all I want to generate a sequence, but I am not able to generate
the logic is that I must have values such as c11, c12... c199
and then A1, A2, A3, A4... A9, B1... B9, C1... C9... Z9
I WROTE AFTER THE CODE, BUT IT IS NOT WORKING CAN YOU HELP ME PLEASE
Published by: 810345 on May 19, 2011 15:51CREATE TABLE ABC(NAME VARCHAR2(100)); declare v_t varchar2(10) ; j number ; i number; v_t1 char := 'A'; type t11 is table of varchar2(3000) index by binary_integer; t1 t11; begin execute immediate('truncate table abc'); for n in 1..99 loop t1(n) := 'c1'||i; insert into abc values(t1(n)); commit; end loop; loop ---to convert j:=1; loop v_t := v_t1||j; j := j+1;---1to 9 insert into abc values(v_t); commit; exit when j = 10; end loop; exit when ascii(v_t1) = ascii('Z') and j =9; v_t1 := chr(ascii(v_t1)+1); end loop; end;
that's about it:
CREATE TABLE abc (name VARCHAR2 (100)); TRUNCATE TABLE abc; -- whenever possible never put ddl-code into a pl/sql-block DECLARE BEGIN FOR n IN 1 .. 99 LOOP INSERT INTO abc VALUES ('C1' || n); END LOOP; FOR j IN ASCII('A') .. ASCII('Z') LOOP FOR k IN 1 .. 9 LOOP INSERT INTO abc VALUES (CHR(j) || k); END LOOP; END LOOP; COMMIT; END; /
-
To generate the sequence in the select clause of the inner query
Hi all
Have the table and the data as below,
I want to generate a sequence number for all the distinct combinations of emp_id and emp_name running
DROP TABLE emp1.
CREATE TABLE emp1 (emp_id NUMBER, emp_name VARCHAR2 (100));
INSERT INTO emp1 VALUES (1, 'Name1');
INSERT INTO emp1 VALUES (2, 'Name2');
INSERT INTO emp1 VALUES (1, 'Name3');
INSERT INTO emp1 VALUES (2, 'Conjoint4');
COMMIT;
Output must be same as below:
EMP_ID EMP_NAME Reference ID 1 Name1 1000 1 Name1 1000 1 Name3 1001 2 Name4 1002 2 Name2 1003 "You cannot invoke CURRVAL and NEXTVAL in the subquery to CREATE."
"MATERIALIZED VIEW, or a SELECT, UPDATE, or DELETE statement;
Steve O'Hearn, Guide to preparing Oracle 1Z0-047
------
-
create table t (id int primary key, dt date, file_no int, batch_no int, data varchar2(5) ); insert into t values (1,trunc(sysdate),23,113,dbms_random.string('a',5)); -- 1.1.1 insert into t values (2,trunc(sysdate),23,345,dbms_random.string('a',5)); -- 1.2.1 insert into t values (3,trunc(sysdate),23,345,dbms_random.string('a',5)); -- 1.2.2 insert into t values (4,trunc(sysdate),23,543,dbms_random.string('a',5)); -- 1.3.1 insert into t values (5,trunc(sysdate),23,543,dbms_random.string('a',5)); -- 1.3.2 insert into t values (6,trunc(sysdate),23,543,dbms_random.string('a',5)); -- 1.3.3 -- insert into t values (7,trunc(sysdate),24,333,dbms_random.string('a',5)); -- 2.1.1 insert into t values (8,trunc(sysdate),24,333,dbms_random.string('a',5)); -- 2.1.2 insert into t values (9,trunc(sysdate),24,333,dbms_random.string('a',5)); -- 2.1.3 insert into t values (10,trunc(sysdate),24,222,dbms_random.string('a',5)); -- 2.2.1 insert into t values (11,trunc(sysdate),24,222,dbms_random.string('a',5)); -- 2.2.2 insert into t values (12,trunc(sysdate),24,111,dbms_random.string('a',5)); -- 2.3.1
Oracle 11.1
How can given this structure and data, I generate sequence at the end of each line numbers? Basically, the sequence number (x.y.z) is such that x (1.n) is awarded for each unique value in file_no. In each x, y (1.n) is assigned for each unique value of batch_no. Within each y, z (1.n) is assigned for all records of this batch. Sample data shows only dt but all sequences must reset and start over when dt changes.
I tried using row_number() over (partition by dt, file_no) and such but nothing quite gives me what I'm looking for.
Help? Thank you
Hello
HELEN wrote:
If you look at my CREATE TABLE, the ID column is a primary key and represents the order of the data in the file.
Done batch_no = 100 come before or after 101? Batch_no = 100 a ID so much until after the id for batch_no = 101.
Good point, but that won't happen because of the way the 'record' is generated. All batch_nos will be contiguous. So if batch_no 100 comes earlier in the file as 101, it should get some 2nd highest sequence number. Otherwise, lower. Basically, the 2nd part of the sequence must simialar logical number to the 3rd party (i.e. order by id) but that messes things. Still struggle with it. Any help appreciated.
I think I understand. You say that, because of the way that the ID is issued, it wouldn't matter if you used the highest id of the batch_no, or the lowest id, or the average, or if you chose one at random; you would get the correct order in all cases.
The following query uses the id low in the order file_no and batch_nos.
WITH got_min_ids AS
(
SELECT id, dt, file_no, batch_no, data
MIN (id) over (PARTITION BY dt
file_no
) AS min_id_file_no
MIN (id) over (PARTITION BY dt
file_no
batch_no
) AS min_id_batch_no
T
)
SELECT id, dt, file_no, batch_no, data
DENSE_RANK () OVER (PARTITION BY dt
ORDER BY min_id_file_no
)
|| '.'
|| DENSE_RANK () OVER (PARTITION BY dt
file_no
ORDER BY min_id_batch_no
)
|| '.'
|| ROW_NUMBER () OVER (PARTITION BY dt
file_no
batch_no
ORDER BY id
) AS seq
OF got_min_ids
ORDER BY dt, min_id_file_no, min_id_batch_no, id
;
The main request is in fact what I posted before, but instead of
"ORDER BY file_no" and "ORDER BY batch_no", she uses
"ORDER BY min_id_file_no" and "ORDER BY min_id_batch_no". These values are calculated in the subquery, got_min_ids.
Output (including the additional sample data I posted):
ID FILE_NO DT BATCH_NO SEQ DATA
---------- ----------- ---------- ---------- ----- ----------
1 23 25 April 2014 113 dXAad 1.1.1
2 345 23 25 April 2014 pumVG 1.2.1
3 345 23 25 April 2014 jLnbO 1.2.2
4 23 25 April 2014 543 xKhCL 1.3.1
5 23 25 April 2014 543 JQoWk 1.3.2
6 23 25 April 2014 543 YjJeC 1.3.3
7 24 25 April 2014 333 WjQNE 2.1.1
8 24 25 April 2014 333 ScWSL 2.1.2
9 24 25 April 2014 333 pXDSD 2.1.3
10 222 24 25 April 2014 OSajn 2.2.1
11 222 24 25 April 2014 QNpix 2.2.2
12 24 111 OwkjI 2.3.1 April 25, 2014
91 100 99 25 April 2014 sRWmT 3.1.1
93 100 99 25 April 2014 IAEFd 3.1.2
92 101 99 25 April odQxh 2014 3.2.1
I know you said that this situation is impossible (that is, if ID 91 and 93 have the same batch_no, then id 92 cannot have a different batch_no), but the application works even if this rule is broken.
-
Insert/update of the XML help merge and to generate the sequence number
Hello
I'm working on Oracle 11 g.
I have a doubt with loading XML.
I get an xml and I need to insert or update data in a table. What I can accomplish by using the MERGE statement.
But there is a column in A table, I need to fill with a sequence number, based on the data sent in the xml file.
The XML does not send the data in this column.
And I have to make sure that sequence is created according to the order in which the records are present in xml.
For example the MERGER is insert five rows and update two lines and insert again 3 rows of xml in table A. The sequence number must be created in the same order for the column in the table.
Also for every new XML, the sequence starts with 1 and ends with the number of records in the xml file. I can't create a sequence and use the seq.nextval.
Please let me know, there is a way to achieve this.
Thank you!
Published by: 934451 on 8 August 2012 06:33
Published by: 934451 on 8 August 2012 06:50Hello
As a result of your previous thread: {: identifier of the thread = 2403469}
You can use the clause for ORDINALITE in XMLTable to generate the necessary sequence:
MERGE INTO target_table t USING ( SELECT x.seq_num, x.pk_id, x.col1, x.col2, ... FROM XMLTable( '/root/record' passing my_xml_doc columns seq_num FOR ORDINALITY , pk_id number path 'ID' , col1 varchar2(30) path 'COL1' , col2 varchar2(30) path 'COL2' , ... ) x ) src ON ( t.pk_id = src.pk_id ) WHEN MATCHED THEN UPDATE SET t.seq_num = src.seq_num , t.col1 = src.col1 , t.col2 = src.col2 , ... WHEN NOT MATCHED THEN INSERT (seq_num, pk_id, col1, col2, ...) VALUES (src.seq_num, src.pk_id, src.col1, src.col2, ...) ;
-
Use the same code module to multiple steps in the sequence
Hi all
I tried to implement a sequence that uses the same code for all steps module in the order, but I'm not returning to it when I need to send it commands. I got regarding the appellant the VI in a new thread so that it can be executed asynchronously. I can run the simple sequence and it will indeed open the VI and move to the next step. When I close the VI manually from the front, the TestStand sequence is completed, as planned. So it turns out that I have a lot more work.
My question is how to call the thread separate from the main sequence and other sequences overtime when I need to change the settings. If I insert a step in the Action, I have to select a file of VI, but from what I can tell, it opens another instance of the file and does not provide an interface with the other asycronously running instance. My next guess was to use a stage of education, but I was not able to understand how to configure the search string to call the VI settings. In addition, I don't know how to proceed. Please notify.
My intention is to start the module code (asynchronously) VI, run several different subsequences in the main sequence, which call this same VI and edit its settings, close everything and report the results. If I'm understand how TestStand is supposed to work, please let me know.
Thank you
GSinMN
What I do is use a queue to send data to the asynchronous VI. So he can run and whatever, but also receive orders from the queue. I use a motor of Action that contains the reference to queue and sends the commands. If you really just call the engine of the Action of your sequences.
-
Generate the sequence of random by number
How to generate random random 4 digit number using the sequence or any other method. Please suggestTake a look at http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_random.htm#ARPLS040
Concerning
Etbin
-
Automatically generate the sequence
I work with several scripting on a project and we have a lot of sequences to write. We are working on a standard for our test procedures to bring them as easy as possible. I spent a little time to play with the property import/export function today and wanted to see the feasibility of generation a sequence from a CSV, xml, excel, files etc.
Is it possible to build the sequence from an external file? We primarily interface with LabVIEW live (and specify the settings) and compared with the planned values. We have a few loops and calendar items, but not much.
I prefer to use TestStand 3.5 it is the version used by most of our writers, but would be willing to update if necessary. I just want to see if this is possible, before working on a new format.
-DH
Hello
Have you looked at the example that comes with TestStand. Its a simple example that creates a sequence from a text file.
concerning
Ray Farmer
-
The reference to the table, view, or the sequence is not allowed in this context
Hello
I am triying to run the SP that I describe below and the OS gives me an error:
------------------------------CREATE OR REPLACE PROCEDURE DWARE.P_CSCV_AGR_MONTH_REVENUE ( TBL_NAME VARCHAR2, START_DATE DATE, RESULT_ OUT NUMBER ) AS BEGIN DECLARE v_tbl_name VARCHAR2(30); v_start_date DATE; v_result NUMBER := 0; v_select_aux VARCHAR2(32767) := ' '; v_temp_table VARCHAR2(30); v_exists NUMBER; BEGIN v_tbl_name := TBL_NAME; v_start_date := START_DATE; v_temp_table := 'temp_' || v_tbl_name; SELECT count(*) INTO v_exists FROM tab WHERE lower(tname) = lower(v_temp_table); IF (v_exists = 1) THEN v_select_aux := ' DROP TABLE ' || v_temp_table || ' CASCADE CONSTRAINTS PURGE '; EXECUTE IMMEDIATE (v_select_aux); COMMIT; END IF; v_select_aux := 'CREATE TABLE ' || v_temp_table || ' AS SELECT ch.date_ month_revenue, s.date_sub month_sub, s.codpromoter, u.OPERATOR, SUM (ch.total) AS TOTAL_OK FROM cscv_sub_charges_' || to_char(v_start_date, 'YYYY_MM')|| ' ch INNER JOIN cscv_subs s ON ch.id_sub = s.ID INNER JOIN cscv_users u ON s.id_user = u.ID WHERE ch.STATUS = 0 GROUP BY ch.date_, s.date_sub, s.codpromoter, u.OPERATOR'; EXECUTE IMMEDIATE (v_select_aux); COMMIT; v_select_aux := ' INSERT INTO ' || v_tbl_name || ' ( month_revenue, month_sub, codpromoter, operator, TOTAL_0, TOTAL_1, TOTAL_2, TOTAL_3, TOTAL_4, TOTAL_5, TOTAL_6, TOTAL_7, TOTAL_8, TOTAL_9, TOTAL_10, TOTAL_11 ) SELECT month_revenue, month_sub, codpromoter, operator, TOTAL_0, TOTAL_1, TOTAL_2, TOTAL_3, TOTAL_4, TOTAL_5, TOTAL_6, TOTAL_7, TOTAL_8, TOTAL_9, TOTAL_10, TOTAL_11 FROM ( SELECT month_revenue, month_sub, codpromoter, operator, sum(total_ok) total_0, 0 total_1, 0 total_2, 0 total_3, 0 total_4, 0 total_5, 0 total_6, 0 total_7, 0 total_8, 0 total_9, 0 total_10, 0 total_11 FROM '|| v_temp_table ||' WHERE to_char(month_sub,''mm/yyyy'') = to_char(sysdate,''mm/yyyy'') GROUP BY month_revenue,month_sub,codpromoter, operator UNION ALL SELECT month_revenue, month_sub, codpromoter, operator, 0, sum(total_ok), 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 FROM '|| v_temp_table ||' WHERE to_char(month_sub,''mm/yyyy'') = to_char((to_date(sysdate,''dd/mm/yy'') - INTERVAL ''1'' MONTH),''mm/yyyy'') GROUP BY month_revenue,month_sub,codpromoter, operator ) GROUP BY month_revenue, month_sub, codpromoter, operator '; EXECUTE IMMEDIATE (v_select_aux); v_result := v_result + SQL%ROWCOUNT; COMMIT; v_select_aux := ' DROP TABLE ' || v_temp_table || ' CASCADE CONSTRAINTS PURGE '; EXECUTE IMMEDIATE (v_select_aux); COMMIT; RESULT_ := v_result; END; END P_CSCV_AGR_MONTH_REVENUE; /
and the output is:BEGIN DWARE.P_CSCV_AGR_MONTH_REVENUE(CSCV_AGR_MONTH_REVENUE,'01/01/2010'); END; /
What could I do to fix the problem?Error at line 1 ORA-06550: líne 2, column 32: PLS-00357: The reference to the table, view or sequence 'CSCV_AGR_MONTH_REVENUE' is not allowed in this context ORA-06550: líne 2, column 1: PL/SQL: Statement ignored
Thanks in advance...Hello
Signature of the procedure is
CREATE OR REPLACE PROCEDURE DWARE.P_CSCV_AGR_MONTH_REVENUE ( TBL_NAME VARCHAR2, START_DATE DATE, RESULT_ OUT NUMBER )
either he's expecting two input parameters, tbl_name in VARCHAR2 and the other START_DATE date format format. Also you need a variable with the number data type to store the value of the PARAMETER RESULT_
Now, look at the way you call this procedure
BEGIN DWARE.P_CSCV_AGR_MONTH_REVENUE(CSCV_AGR_MONTH_REVENUE,'01/01/2010'); END; /
first parameter must be a VARCHAR2, so place CSCV_AGR_MONTH_REVENUE in single quotes.
second parameter must be a date, so use to_date() function.
Finally declare a variable with the data type of number to maintain the value of the parameter RESULT_Something like this:
declare t_num number; begin a('CSCV_AGR_MONTH_REVENUE',to_date('01/01/2010','MM/DD/YYYY'),t_num); dbms_output.put_line(t_num); end;
Vivek L
-
How to generate the sequence of grid
I have 1 page
and the order like that
level 0 MYHeader_table
Level1 MYHeader_table scrolling region
Level2 grid MYDetail_table
How I gerenate MYDetail_table.seq in RowInsert sequenceYou must add the code to your peoplecode rowinsert.
example:
MyDetail_table.seq.value = MyDetail_table.seq.value + 1;
also, why do you myheader_table Level0 and level1, it is a bad design.
-
List table displays all the tables in diagrams
I think that this problem may be related to .
When connected to certain schemas using SQL Developer 1.5.4 (Build HAND-5940) not all tables are displayed in the list of the table in the Connections pane. The missing tables in the list cannot be retrieved by filtering or. The database is 9.2.0.8.0 and the PC operating system Windows XP 2002 SP3.
For example, 'select count (*) from user_tables' returns an account of the 52 in a schema, but the unfiltered tables list shows only 35 of them. I am logged in as the owner of the table of all 52 paintings. It doesn't seem to be the number of tables that counts as in another schema, there are 127 paintings and all these are correctly displayed. Filtering help =, LOVE or NO LOVE does not cause the missing paintings to appear.
This does not work on all databases, which are all the same version, nor in all schemas - even the most similar in other environments. I tried to disconnect and reconnect also close SQL Developer and have restarted - with the same results. I also close all other running programs and other connections, in which case it was a problem of memory, without success.
Please add information about it if you have this problem, or something that seems to be related. Thank you.no sweat ;)
-
generate the sequence of number
Hello
By request, below I want to automate the SQL below such that she will work for the coming year without touching (from 2011)
e.g. year marked after the keyword (APPLE). i.e. 2011, 2012, 2013 etc.
For the coming year, I'm still updaing the program by adding a condition to the program. This means that for the next year 2015, I should add as condition (or phone laptop like '% APPLE2015') that I don't want.
with abc as
(
Select 1010 as id, 'APPLE20100123' like mobile double
Union
Select 1011 as id, 'APPLE20080125' like mobile double
Union
Select 1012 as id, 'APPLE20110123' like mobile double
Union
Select 1013 as id, 'APPLE20120123' like mobile double
Union
Select 1014 as id, 'APPLE20130123' like mobile double
Union
Select 1015 as id, 'APPLE20140123' like mobile double
Union
Select 2012 as id, 'APPLE20110153' like mobile double
)
Select * from ABC
where
phone portable like '% APPLE2011 '.
or
phone portable like '% APPLE2012 '.
or
phone portable like '% APPLE2013 '.
or
phone portable like '% APPLE2014 '.
You can do it.
where substr(cellphone, 1, 5) = 'APPLE' and to_number(substr(cellphone, 6, 4)) >= 2011
If necessary to create a feature based on the same index.
-
Break down and an object of a list/table of the index reference
TestStand using I'm trying to figure out how to break down and an object reference to a table/list of the index. My sequence is attached. I received a few tips of the 3rd developer with VB code, what should be done. I'm having a problem translating in TestStand. VB code follows the description.
I use .NET to run a 3rd party software using a sequence of imagery system and run 3rd party software tests. In TestStand, my "GetCurrentTests" approach, when an object for a specific sequence reference, returns a reference of type object ' object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand]); expected return a list of tests in the sequence of part 3.
Next steps "GetCurrentPattern" needs to index through this list in order to get and then define and display the display model of the specific test to start the specific test. This next step class is RadiantImaging.TSEngine.ICommand (interface) and returns an object reference (radiantImaging.PatternGenerator.Patterns.Patternbase): a reference to the model.
What I'm confused about is decaying of the 'object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand])' return value in order to provide the? indexed reference object for "Model of GetCurrent" step.
VB code is provided below for me that shows how it can be done in VB. I'm not familiar enough with TestStand, .NET and VB to break down this >
Any suggestions or advice is greatly appreciated.
VB code:
Public Class Form1
Private PatternGenerator.IPatternGenerator MPG
Private WithEvents mTestSequence as TSEngine.TestSequence Private Sub InitializeButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InitializeButton.Click
TSEngine.Settings.MeasurementSource = TSEngine.MeasurementSources.Camera
TSEngine.Settings.SaveMeasurementsToDatabase = False
TSEngine.Settings.SaveResultsToDatabase = True
TSEngine.Settings.SerialNumberAllowDuplicates = True
mPG = TSEngine.CurrentPatternGenerator
TSEngine.Initialize ("C:\PM 4616197.rdb Calibration")
TSEngine.Databasename = "C:\default Alpha_PEK_Date.pts".
TSEngine.InitializeCamera)
End Sub
Private Sub RunButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RunButton.Click
mTestSequence = New TSEngine.TestSequence (1)
Dim result as TSEngine.Tests.ResultEnum
For i As Integer = 0 To mTestSequence.NumberTests
Dim p As PatternGenerator.Patterns.PatternBase
p = mTestSequence.CommandList (i). Model
p.PatternGenerator = mi/gal
mPG.MonitorType = PatternGenerator.Monitor.PrimaryPartial
' p.PatternGenerator.MonitorType = PatternGenerator.Monitor.PrimaryPartial
p.PatternGenerator = mi/gal
p.Show)
result = mTestSequence.RunSingleTest (i)
Dim results As List (Of TSEngine.IResult) = mTestSequence.CommandList (i). Result
Results (i). Name
mTestSequence.CommandList (i). ResultMeasurement.
Next
End Sub
Technical support solution: "I spoke with R & D and they informed me that the type of data in question is a generic class that is not supported with the .NET adapter. You can change the data type of a code module to another using a data type of object reference, but you can not manipulate the generic classes within TestStand.
"" "" You can find this information in aid of TestStand under NI TestStand environment reference help"TestStand adapters" adapters for .NET ' adapter .NET '.NET called settings ' settings not supported. Here, the solution would be to ask a code module that performs this task for you. »
Change the settings for call .NET
Parameters not supported
The TestStand .NET adapter cannot call methods and properties that have arrays as parameters in staircase or return types and does not support structures that have shredded the members of the group.
In addition, the .NET adapter does not support creating or call methods on generic classes.
My solution was to implement the foregoing in VB.NET from TestStand .NET adapter does not support .NET generic data types.
Maybe you are looking for
-
CD/DVD drive disappeared into the Explorer on Satellite Pro M40
Hi all of a sudden the DVD/CD drive on my m40 disappeared (does not appear in the Explorer). The material is very well, windows does not want to leave work. Ive been in device manager and I get the following. BZ5033W NDE616S SCSI CdRom DeviceBZ5033W
-
MOTOROLA PHOTON Q 4 G LTE white noise
Lately while listening to music on my phone from SD card or via Pandora/Slacker, I hear what I can only describe as white noise. I remember back when I got the Droid 2 Global, this has been caused by the presence of Audio effects on so I have not tur
-
When it comes to queues high speed
-
UPDATE OF THE BIOS ACER E5-573-32 D 9
Hello. I have a brand new D-E5-573-32 9 with an outdated BIOS. Sure to update with 1.37 (1. N16S-GT 4 G vbios to 82.08.46.00.44 update 2. Table update of brightness) as of 10/03/2016? Thank you
-
Problem: GetUsersDetailRequest in the method of users. : NET
Hello I want to get all users in detail GetUsersDetailRequest. Like, I have to get all the users first in order to get the answer. GetUsersDetailRequest request = new GetUsersDetailRequest(); Request.Metadata = metadata; Users [] = request.users; I w