ColdFusion using only not - Xms JVM argument I specified

Similar Questions

• operating system uses only not 4 GB ram

  I have Windows XP Professional installed on my pc, my bios says I have 4 GB or memory installed and usable. Where as my when I get into the operating system itself it only said that I have 2.0 GB used. My bios is up to date, I have other PCs that allow all of the 4 GB be used on the operating system, so I'm not sure why this one gives me the penalty.  Any ideas that would help?

  -asus a8n32-sli mobo
  -4 GB of ram ddr pc3200 400 MHz
  -geforce 8500 gt graphics card
  -amd 64 3800 +.

  Hello

  1. which version of the service pack is installed on your computer?

  2. don't you make changes to the computer until the problem occurred?

  The RAM reported by the System Properties dialog box and the system information tool is less than expected in Windows Vista or in Windows XP Service Pack 2 or later: http://support.microsoft.com/kb/888137/en-us

  Hope this information is useful.

• ESXi 5.5 use only not all vmnic

  Hi all

  We have 2 switches configured in esxi, one for internal communication (between hypervisor and storage servers and others) and an external (i.e. ssh). But I often find my ssh connection gets very slow when you try to do an ls or something simple in the storage server. In any case I had a glance esxi and I noticed that in the tab performance that only 2 vmnic is used (we have 4 physical network cards, so we have 4 vmnic). An external and an internal. Grouping of NETWORK cards is implemented and all network cards are attached to assets. What's weird is that in the performance tab all NETWORK card can be used, if I switch to a standby mode, another takes over. But all 3 are not used at the same time... Someone at - it ideas? I've attached screenshots.

  Thank you.

  OK, cool.  The installation program looks good... with a warning.

  As you road based on the selected original Virtual Port code, you must confirm with your BOD network that the physical switch is configured correctly.

  An excerpt from the VMware KB

  • The default load balancing strategy is route based on the port virtual origin ID. If the physical switch uses the aggregation of links, route based on the IP hash load balancing should be used. For more information, see host requirements for the aggregation of links for ESX and ESXi (1001938) and the guide of VMware Virtual Networking Concepts .

  So really you need to know how the switch is configured to confirm that it is compatible with ESX, or change the configuration of switch to work with ESX :-)  If you prefer or are more standard.

  The Ko with more details is here

  VMware KB: Grouping of NICs in ESXi and ESX

  Hope that helps, but I think that you are in the place where you need to talk to the network before proceeding

• Maintaining Acrobat IX and don't use only not the cloud.

  Hello, I'm not interested by the use of the cloud.  I have Acrobat XI and it works fine.  How can I keep and use my old program?

  Hey bernitaw28398602,

  According to my understanding, you have been asked to install Acrobat DC (being a Subscriber CC or Acrobat XI), but you want to continue using Acrobat XI only.

  So, if you want to uninstall the DC and back to Acrobat XI, then check out the below given KB file link for the same:

  Acrobat DC uninstalled Acrobat XI | How to get Acrobat XI

  Let me know if you need more assistance.

  Happy to help you.

  Kind regards

  Ana Maria

• Re: Satellite L650 - Win 7 64 bit use only not all ram

  Hello

  I am running windows 7, 64 bit, but when I go into the properties of the system on my Toshiba L650 it says I use 2.99 GB to 4 GB.
  How do he uses all 4 GB?
  Why only using 2.99?

  Thank you

  Hello

  A part of the main memory is shared by the graphics card!
  It runs automatically, and you cannot control it.

  Simply said; Win 7 recognized the full RAM, but a part of the main RAM has been assigned to the memory of the graphics card.

  Check DirectX usign the dxdiag command. I think you'll see the full 4 GB of RAM it.

• Windows Media Center using only not to Clear QAM channels, at least some of them.

  So check it... I already updated my operating system from Windows Vista to Windows 7 as soon as it became available last year and had been using Windows Media Center on my HP m8330f to record live shows with a digital antenna.  I decided, spotty reception because, as I plug in my TV Tuner directly through my cable (without decoder) and Clear QAM channels this mode of access.  After noticing that my old TV Tuner was missing several channels (not shown 6) I chose to add missing channels, as shown in several forum posts.  I added successfully most of the available channels except the two I wanted most, NBC and ABC.  Since my TV Tuner was quite old (double ViXS ban, card simple tuner), I decided to upgrade to the Hauppauge 2250 encryption that could be a cause for the missing channels... and more, it is a ban on double, double tuner the card.  Alas, the Hauppauge worked in much the same way that its predecessor and the lack of NBC (4.1) and ABC (2.1) are not found... even after attempting to add channels.  All that is visible is a "Service is unavailable" message.

  I am a customer of Time Warner Cable in New York and have had no problem accessing these (Clear QAM) channels on my' computer', the LG 32LH40 thanks its tuner internal.  Moreover, I was able to access these same channels via the same TV Tuner using WinTV v7 and Beyond TV.  This leads me to believe that the problem lies in the Windows Media Center software.

  I am a big fan of Windows Media Center and love how convenient it is (apart from my current dilemma) and still want to use it as my main media look at a software but I'm torn on this issue.  I don't know if you have experienced this problem before, but I am quite stunned, especially since I feel like I've exhausted all channels (which goes as far to add the channels first as a modulation QAM 64 and 256).  Does anyone else have this problem?  Any ideas would be extremely useful.

  Thank you!

  Hi Chris,

  Thanks for your help!  I thought both on the channel number, but I could not find a network ads everywhere about my service area (I had not yet known on that SiliconDust website but I just took a shot and that's exactly what I needed...) (Thank you!) ; or the information that I found were incorrect.  I ended up working all last night.

  After many rescan with WinTV and Beyond TV, I could finally figure what channel were virtual and who were not and add missing channels accordingly.  Remappe MC my 104,2 at 4.2 but not my 104.1 makes my TV as well as WinTV.  Beyond TV didn't display the number of virtual channel while parsing, so I was able to get the numbers of QAM channels how.  He was just working backwards.  However, MC had yet 104.1 (my 4.1 missing such as mentioned in my previous post) in his 'detected chains"(strangely)... so I added it.

  Thank you for this Web site again!

• Don't use only not TNS entries properly

  SQLDeveloper Version 2.1.1.64. I created TNS alias to connect to individual instances of CARS in my TNSNAMES file. ORA file. SQL * Plus, when I use the TNS alias to connect to a particular instance, I'm connected to the right pair. When I use the same alias TNS with SQLDeveloper, it connects me randomly to all instances in the cluster.
  
  I correctly set the location of the TNSNAMES file. ORA file in the preferences. I'm simply specifying a server name and SID in the TNS alias, so there is no way that TNS can connect to another instance. I have only a single file, TNSNAMES. ORA file on the entire computer. Oracle 11.1.0.7 client version. The TNS alias for each instance is unique in the TNSNAMES file. ORA file.
  
  Any ideas on where SQLDeveloper Gets the incorrect login information of?
  
  Thank you...
  Arun Gupta

  Sqldev reads all tnsnames. * * ; can you check there is only 1?

  K.

• Reference Dell Eql SANDRA use only not all configured NIC

  Have 1 virtual (in hyper-v) server with 4 NICs. Server OS Sp1 with EQL ASM Win2008R2 is version 4.5. The lan NIC is excluded by subnet in auto-snapshot manager/MPIO settings.

  3 SAN adapters are in a different subnet and are "inclusive". The 3rd nic has no active sessions to the storage group. Tab connections ISCSI MPIO confirms its authorized to connect to the San. Instead of 3 connections to the volume on 3 network cards, he made 2 connections to 1 etc...

  I tried the EQL ping to IP configured for that particular network interface card, got no response. The 2 other IP's ping requests. Checked the Hyper-V host; The NIC 3 are in the same Vlan. This virtual server is the only one connected to the San with this problem.

  Any ideas on why and how to solve this problem?

  I was talking about the specific cable and port associated with this NIC there could also be a bad network card.

• On initial Setup, I enter a computer name using only valid characters and get an error message saying that some characters are not valid.

  I installed Win7 using a .wim that I used successfully several times before. The .wim is on my USB and the computer is not connected to the network. Using a disk to start Windows PE and imagex, I applied the image. When Windows 7 was started for the first time and prompted me to a computer name, I entered a name with only lower and upper case characters. An error message told me that some characters that I had used were not valid and listed the characters not valid, which I had used.

  What is my next course of action?

  I did a hard reboot and Windows later accepted my computer name.

  This has been resolved.

• Used only legitimate license key for windows 7. But could not be enabled. message: ' the key you typed cot allows to avtivate windows on this computer "."

  Used only legitimate license key for windows 7. But I could not activate. I get the message, "the key you typed cot allows to avtivate windows on this computer".

  In fact I even my other computer installed and uninstalled the one installed in this system. What is the reson? If yes what should I do?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once downloaded, run the tool.

  Click on the button continue, after a short time, continue button will change to a copy button.

  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• How the identity if one table used only by synonyms and not by any other subprogrammes in a schema?

  Hi people

  How the identity if one table used only by synonyms and not by any other subprogrammes within a schema. I see in the TOAD describe objects tab used by, but I would like to identify hundreds of table so I would like to know if there would be any SQL or Meta Data Tables?

  How the identity if one table used only by synonyms and not by any other subprogrammes within a schema. I see in the TOAD describe objects tab used by, but I would like to identify hundreds of table so I would like to know if there would be any SQL or Meta Data Tables?

  The ALL_DEPENDENCIES view has hierarchical information based on object_id

  The view object has the object_type.

  Create a hierarchical query on the first view and attach it to the second view.

  Or you can use the utldtree.sql file in the installation of the DB admin folder. Comments initially show you how a hierarchical query based on the object type.

• Hi, I need to download the acrobat PDF after registration and cc payment, I get the new which is not available for mac ist... How can I solve this problem... I use only the mac...

  Hi, I need to download the acrobat PDF after registration and cc payment, I get the new which is not available for mac ist... How can I solve this problem... I use only the mac...

  If you had bought subscription Acrobat Standard / stand-alone product , you need to cancel the subscription / order and re - register / re - order subscription Acrobat Pro DC / stand-alone product.

• I got Pro 8.0 on an old computer.  tried to install pto 8.1 using only series. as old and it did not work.  where can I find pro 8.0 or where can I find the correct SN?

  I got Pro 8.0 on an old computer.  tried to install pto 8.1 using only series. as old and it did not work.  where can I find pro 8.0 or where can I find the correct SN?

  If you do not need acrobat 8 pro or something another link below, you will need to explain.
  

  
  

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 10, 11, 12, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Download and installation to Prodesigntools help links are located on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".

• Is CFFILE read uses only the absolute path or the relative path too?

  I use cffile read access to my file to json. I would like to know if the cffile uses only absolute or relative path too? If I tried to use the relative path, it kept send me errors on non-existent file.

  Read what I posted on the documentation. CFFILE read must be an absolute path. If you use a path relative to its parent to the CF temp folder:

  If not an absolute path (starting with a drive letter and a colon or a slash to advance or back), it is relative to the ColdFusion temporary directory, which is returned by the GetTempDirectory function.

  There is no relative path from your web files. IF you just put a relative path, it will attempt in the CWS for the file temp folder.

• Re: Is it possible to completely recover VistaOS using only the recovery DVDs?

  Hidden WinRE partition has been deleted by mistake, but I still have the original recovery DVD for my A200.
  Is it possible to completely recover VistaOS without the WinRE partition, using only the recovery DVDs?

  Of course.
  The Toshiba Recovery CD is designed to recover the laptop.
  Using the recovery CD you will get factory settings.

  But note; the Toshiba Recovery CD format the whole HARD drive and erases the HARD drive partitions.

  Welcome them