Collision detection - then click on next picture

Similar Questions

• On my iMac OSX El Capitan v 10.11.3 when editing of photos and work between them the screen takes over and moves the picture on the next picture before Ive had the chance to edit, I then fold the photo required to try again. This can hap

  On my iMac OSX El Capitan v 10.11.3 when editing of photos and work between them the screen takes over and moves the picture on the next picture before Ive had the chance to edit, I then fold the photo required to try again. This can happen several times and its so frustrating.

  Similar thing TI also occurs when you are working on other programs on the mac, but not nearly as much.

  Guessing here, but try to disable drag between pages on the tab more than movements in the system preferences > mouse. or a Trackpad. Depending on whether you are using.

• PS and LR no Serviço more every time I get on a screen that me says log in, what I do, then the window ^ next tre says said: CCP is now under licennce...@yahoo.fr. Continue to take advantage of the software. I continue to click on and (drum roll)

  PS and LR no Serviço more every time I get on a screen that me says log in, what I do, then the window ^ next tre says said: CCP is now under [email protected]. Continue to take advantage of the software. I continue to click on and (drum roll) it sends me on the screen asking me to connect. PFFFF... qqun have a solution? Thank you. I already spent on the site in English. I got a response, but none of the normal staff works. Since they are absent. They might have more consideration pour those who are their subscription 50% more expensive Saitor USA. The European competition commission should look at the problem. Some North American cmpagnies were fined not sad. That it was my rant. But hey it of still 5 days and there are with that work.

  Hello

  Please see Re: loop "Sign in required" and https://forums.adobe.com/thread/1094836

  Hope that helps!

  Kind regards

  Sheena

• Adobe captivate true/false games television correct score if I click on send then go the next button

  Adobe captivate true/false games television correct score if I click on send then go the next button

  If I go directly to the next button, then I get score 0

  Why is it?

  I'm new in adobe captivate, but I didn't know good tutorial to solve the problem?

  for your better understanding, I give you the link: http://graphicscoder.org/test/quiz/

  I am using captivate 8

  It seems that you don't know how the question slides are set in Captivate. The next button has a dual functionality: during the quiz, it's a Skip button, which means no results at all. It is necessary during the review to avoid blocking of the user on question slides. If you don't provide a review of the quiz, you can get rid of the next key completely. If you provide a review, drag the next under the Clear button button (can be done on the master quiz slides). This way it won't be visible during quiz, but becomes visible during examination where the Clear key is automatically deleted.

  This changed in Captivate 9, but you're still on 8.

  The submission process is a two-step process. If you want to learn more about the design of quizzes, take a look at my post:

  Question Question slides in Captivate - Captivate blog

• I can't import photos into lightroom free trial cc/6 2015. Lightroom can see all my pictures from my SDHC card and allows me to implement the import, and then clicking import it says that all the selected files (245) has not can be imported as they could

  I can't import photos into lightroom free trial cc/6 2015. Lightroom can see all my pictures from my SDHC card and allows me to select and configure the import, and then clicking import it says that all the selected files (245) has not can be imported because they could not be read. I use MacBook Pro 2015 OS X Yosemite 10.10.3, photos taken with Canon G1 X Mark II. Any ideas?

  This message indicates that you have not permission in writing to the destination directory.

  So:

  1. Determine the destination directory... go in the Lightroom import dialog box and note the location of this directory specified on the right side under "Destination".
  2. Go to your operating system and change the permissions on this exact directory have WRITE permission.

• HP Officejet Pro 8610: hp officejet 8610 printer error "Please stop your printer, and then click.

  When I turn on my HP Officejet Pro 8610 - it goes through its cycle - once it ends the initialization of the startup LCD flashes a Blue Screen of Death with B8931C7C for less than a second, then the screen shows printer error "Please stop your printer, and then click.

  I've tried so far, I've tried it unpluggin at the back, wait 15 seconds and 60 seconds.  Also this operation and in him plugging in several power strips and directly into the wall outlet.

  I was able to restore the default settings at one time.  This questions has gradually deteriorated to the point that wow its very pretty in a loop without end with failure - consistantly crashing after start up - please advise.

  Hi @mrberad,

  Welcome to the Forums of HP Support!

  I understand that your printer HP Officejet Pro 8610 is stuck in an error state. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating, it would be for you. The error you receive is usually related to a general printer error, sometimes leading to a hardware problem.

  I take a flashlight and look inside the obstruction.

  Use this guide to check obstructions:

  • Displays a Message 'Transport Jam'

  I see that you reset the default printer. Have you tried a reset complete semi? I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  If you have completed all the above steps and your product still has a problem, service the product.

  If the printer is buyer's remorse period, you can take that back at the point of sale or contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Slider & amp; Collision detection issue

  I couldn't find anything to help solve my problem thanks to my various research and turned to the publication. First - I am strictly a fan and try to create a timeline of the biography of a genealogy site that I am building.
  I have a scroll bar with a graph like the dredger pocket watch. What I hope to achieve, is that when the Watch has crept along the timeline and is is arrested on a marker (shown as a year), I'd like to pop up the relevant text on this date in time.
  
  My cursor is a movieclip and markers of the year are buttons. Through my research, it seems that I need to use both the collision detection and a certain type of load a script attached to it. It is quite possible that I am too far from my skill level, but I wanted to tender hand in case there may be help for me.
  
  I don't really have any code to show that I am very uncertain as to what would be the code appropriate to begin with. You can see an example of what I'm trying to accomplish here-> my scroll bar
  
  I currently have the text attached to the "over" frame in the button for example.
  
  Thank you in advance,
  Randy

  Hello

  A quick solution to a situation that involves no collison detection must follow the x position of your clock instead, Minesweeper movieclip. You can use collision detection if you want, but by the way you set up your movie, it will involve a lot of targeting and recovery of the property. This track requires that you only add a few lines to a code you already have.

  Follow these steps

  (1) from the main stage, double-click your mc with the clock and the line in. Create a new layer and put 2 on that dynamic text boxes. Give the first instance of 'xpos' name text box and the other an instance name of "marker". XPos position near the bottom right of the scene and the marker on the opposite side. We will use these boxes for testing.

  2) click on the Actions layer and look for the line that says:

  ratio = Math.round (this._x);

  This guy below

  XPos.Text = report;

  Test your movie and you should see your x on the lower post update when you drag the clock. By working? Well, that's what we want.

  (3) according to the type of line last in what follows

  space var = 3;

  If (ratio > 36 - space & ratio)<>
  Marker.Text = "1900";
  } else
  If (ratio > 172 - space & ratio)<>
  Marker.Text = "1915";
  } else
  If (ratio > 399 - space & ratio)<>
  Marker.Text = "1945";
  }

  OK - explanation - what is happening here is to check if the clock is on one of the markers and we send the right text to the other created textbox marker information previously. If you test your animation and drag toward the center of the 1900 marker you will see its position x is about 36. The space variable adds or subtracts 3 on this position so that we have a good size "struck the area. In other words, if the x position is between 33 and 39 while we are on the marker of 1900. 1915 marker is the same with the other two - between 169 and 175, between 396 and 402 is marker of 1945.

  You can now replace the marker.text = "1900" line with what you want. You can make the box marker text a movieclip and it melted or slide in with the information you want.

  If it helps, then remember to delete the xpos off stage text box and delete the line of script that uses it. It was just to test.

  Here's the complete code

• Management change of HPSMH Collision detection

  Hello world

  We want to just implement collision detection mechanism in the management of change HPSMH. That means that if a CR was raised with a service assigned within a specific date range (say from 2nd to 4th month) .then if any new CR is triggered with the same affected service in the same amount of time then it will show a validation that the services concerned has already been used in a few other CR in the same amount of time.

  Hello and welcome to the HP support community!

  You have posted this question in the section the Community Forum of HP Android tablets.

  According to me, that's not the right area for your question.

  Myself, I have absolutely no idea what you're talking about!   :/

  WyreNut

• I imported the pic from my camera to my images. When I go into my photos and do turn and then try saving the picture, it says "you cannot rotate this image.

  original title: read only the settings on my photos

  I imported the photos from my camera to my computer and saved in a folder in my pictures.  When I go into my photos and do turn and then try saving the picture, it says "you cannot rotate this image.  The file may be used or open in another program or file or folder can be set to read only. "I have tried many and repeatedly edit the files and folders to uncheck Read-only, but it keeps changing its property back to read-only.  I also know that the file is not open or in use anywhere on my computer.  There must be something wrong with the parameters of only reading, but I have no idea how to do to figure it out, I tried several times to change.

  Any help would be great!

  Thank you!!

  Okay, it looks like that your camera records the files in write protected files.
  1. There should be settings on your cam to stop recording pictures like "non-indexed.
  2. but right now, try this:

  Right click on image > click Properties > click on advanced > check / uncheck the ' Index
  This file / folder...' option (should be the second option)
  Click OK > click on apply.
  and you'll see it disappear / appear

  You can do this for all the photos (hold down the ctrl key while selecting to choose several files at once)
  Eddie B.

• "your advice regarding the account settings is: go to the Tools menu, and then click account settings ' but when I click on tools I can't see account settings

  All I'm doing is to see my host SMPT name

  Most documentation refers to the now hidden Menu bar. Like most of the software by pressing alt or F10 applications reveals hidden menus bars.
  I suggest that you put the Menu bar so it displays all the time.
  The Menu bar, select View-Toolbars and click on the menu bar.

  When you get to the setting of the account go to the bottom of the list of accounts on the left side, then click outgoing server (SMTP) to view and change this info.

  You can also get to the account setting by clicking with the right button on the account in the left pane and the selection parameters.
  If you use the messed up AppMenu button, click on that and hover over the Options. The choice of the account setting is displayed.

• When I click on edit and then click on find that nothing happens

  I use firefox 25 in windows 7. Recently, perhaps since the last update, when I click on 'Edit' and then click 'Search', nothing happens, or does it work ctrl + 'f '...

  How does the search bar Firefox changed 25. Now, instead of being a global bar that appears at the bottom of each tab you opened, it appears in the active tab. When you change tabs, you will only see here.

  If you use the extensions focus on the search bar, it is possible that there is a conflict with this change. Could you try to update the extensions and see if that helps?

  To open the page modules, either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions. Then click on the "gear" button and use the check for updates. You may need to restart Firefox by using the link provided if there are updates.

  Any difference? If no, and you have a few extensions focus on the search bar, try disabling the and restart again if necessary.

  Any difference?

• I can't access my Windows Live Hotmail account more because of a message that tells me to disconnect, and then click my web account to outlook.

  I can't access my hotmail account more because of a message that tells me to disconnect, and then click my account from Outlook web; which then brings back me to ordinary sign in because I have no direct application on the web.

  original title: can connect is more.

  You have posted the answers Feedback Forum. I'll pass this to the Windows forum space.

  I'm not clear on exactly what your problem may be, but I suspect you have find better assistance in the Windows Live forums (which are part of a different forum platform).

  Help and Support for Windows Live Hotmail can be found at http://windowslivehelp.com/product.aspx?productid=1

  -steve

• To install the device driver required to access your hard drive, insert the installation media containing the driver files, then click OK."

  I'm trying to move from xp to windows 7. I spent all the requirement but she says to install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK. "what should I do? Where can I find the driver?

  Guess he would seek software/drivers for the chipset MB

  & sata/IDE controller software. Get the MB hardware specifications, go to the mfg

  Web site & download the software and drivers. If intel, download the chipset installation

  utility & install it 1. The other would be the SATA or / and drivers for the MB IDE

  controllers, 'Matrix Storage console' would be the one, also chk for desktop

  Internet downloads, amd, and other brand materials would be substantially the same.

• Error: "file 9xmigrat.dll on (unknown) is needed type the path where the file is located, and then click ok" when you try to install Windows Media Player 9.

  original title: WMP9 re-setup

  Hello. I use XP SP3 with all post-SP3 updates critical. Windows Media Player 9 does not work. When I try to reinstall, I'm stuck: the 9xmigrat.dll of file on (unknown) you need to type the path where the file is located and then click ok. I like WMP9 and do not want to use a newer version of WMP. I was not able to find 9xmigrat.dll

  This happens when I try installing to wmp.inf.

  If I try to install the MPSetupXP.exe, it does not either.

  Any ideas? TIA

  Thank you, David. It seems that the problem was caused by incorporating the updates for WMP9 using nLite. I made another CD of installation excluding these updates. A clean install of XP SP3 and WMP9 is working. Thank you for your response.

• When I turn on my computer, I get a bubble in the lower right of the desktop that says: "a program has been blocked from editing your search default setting". Then "click to change your notification settings."

  Whenever I turn on my computer I have a bubble in the lower right corner of the desktop that says: 'Search Settings Notification' then 'program has been blocked from modifying your search default setting". Then "click to change your notification settings."
  When I click I get a box called Toolbar Options. Tab shows the search parameters. Statement: "search settings protects your search settings of the browser to keep the programs change without your knowledge." I am then presented with 2 boxes checked with the following instructions: 1. protect my browser default search and let know me of any attempt to change it.  2. enable the browser error Network Wizard page.  Downstairs, the options are either save or cancel.
  My question is what does all this mean? Should I uncheck boxes or both? How can I avoid this message occurs ever time I turn on PC?
  I must tell you that my browser is Mozilla Firefox.
  Thank you.

  original title: Notification settings search

  Hello

  I would check the first box for sure, the second is not as important but probably a good idea to choose from as well. Once you save it, it should not appear again.