Color of the loop?

Similar Questions

• Is it possible to put the property inside the loop node?

  I created three nodes of separation of property (color graphics) for my 3 XY graphs.

  Is it possible to have a property node, put this tag inside the loop where I ranges from 1 to N, and say plot_color_i

  where plot_color_1 would update 1 XY graph, plot_color_2 update XY Graph 2, etc. ?

  See the attached VI.

  Yes.  Create an array of references to the XY graphs and have this auto-index in the property node in the loop For

• color of the table does not reset

  My table (TABLE of SUM AVG) is supposed to show entries below zero in red. He has a little problem. The first time that it works, but the second time that the color of the text will not return to black when I run again.

  He remembers the entries that were red on front. Based on my wiring below, the second time I run it, it must set the background color to the light yellow and black text, then make loops for.

  BTW, I also used a sequence flat to force this order, but that did not help.

  

  Hi murchak,

  What can be seen in your picture you

  -only value a "yellow light" cell background: ActiveCell = (2, 2)

  -and then you assign the first 3 lines "light green" background

  -then you set some cells, according to their value to red. (Btw. There is a special ' ")<0" function="" in="" the="" comparison="">

  There is no place where set you a black background for all cells.

  Maybe you should try ActiveCell (-2; -2) instead?

• Event inside the loop 'for' confusion

  Hi all

  I have an event inside a N = 2 for the loop, which generates an array of 2 elements (auto-index mode). The first value is a first event, the second of the second round. The events are the mouse clicks on a front panel with many buttons control.

  Am I able to access the i counter inside the front loop of 2 elements output table? He does not appear.

  Maybe I want just 2 events in the order I should put two copies of this event in a sequence of 2 image... but it creates the need to set up the event twice... a concern, because it contains many possible sources.

  Ive tried everything in loops, by the way I like a local variable, tunnels, shift... registers but I don't seem to be able to access I have during the loop.

  Can anyone suggest a method or a better structure/approach for this issue.

  In any case, it seems that the program is blocked waiting for the second round, so I can't do anything with the value anyway?

  I want to take action after the first test and before that I'm waiting for the second event.

  Thank you

  Carloman

  OK, you're much too complicated things dong.

  • Use a unique event for all low Boolean mice, then use the ctrlref of output event to detect only one. For Boolean values, you can use an array of Boolean instead of all these individual buttons.
  • Don't do the "table of cluster... unbundle" songs and dances. It's just ridiculous! 'array Index' is sufficient.
  • You need an event for the stop button.
  • The structure of your outdoor sequence has no purpose.
  • The coloring is registered with VI, no need to recolor with each race.
  • Do not reproduce any of this code. Your internal matter differs only in a constant of the diagram, it's everything that belongs inside the case. The "subset of table to replace" belongs to the outside.
  • Now, simply do the processing in a new event and ignore if the State isn't fair. Modify if needed.

• Change the color of the field

  I want to create a field that contains a rectangle I want to change the color of the rectangle it flashes. The implementation of flashing

  With some delay in treatment, I think that the approach proposed by stef will tie up your Blackberry looped continuously update the field.  Invalidate in the paint method will stop the treatment immediately in order to redraw this field.

  Instead, use a Thread or a TimerTask to invalidate the ground at regular intervals.

  As example where it's done, take a look on:

  How - to view an animated GIF
  Article number: DB-00652
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800345/...

  This article uses a Thread to schedule updates on a field that displays an animated gif image.

• AS3/AIR - for the loop is ignored but the rest of the function to run

  This has left me speechless. It is either something really stupid on my part or part of the Flash. Here goes:

  I have a function that accepts all simply a table of movieclip references, executes a loop to add them to a sprite container, then the container gives a background color. It works perfectly the first time. Now, when the program returns to this feature yet it completely ignores the loop but always adds the background color. Here's the function:

  public void prepareContainer (sections): Sprite

  {

  trace ("prepareContainer called.");

  trace ("cuts" + sections);

  containerClips.splice(0,containerClips.length);

  trace ("containerClips.length is" + containerClips.length);

  for (var rs: int = 0; rs < sections.length; rs ++)

  {

  trace ("sections [" + rs + "] is" + [rs] sections);

  }

  var w: Number = 0;

  var l:Number = 0;

  for (var sx:int = 0; sx < sections.length; sx ++)

  {

  trace ("sx is" + sx);

  section of the sections [sx] = var;

  If (SX > 0)

  {

  section.y = sections [sx-1] there + .height sections [sx-1];

  w = section.width;

  l = l + section.height;

  }

  container.addChild (section);

  }

  container.graphics.beginFill (0xfafafa); Just for the background color in the container.

  container.graphics.drawRect (0,0,w,l);

  container.graphics.endFill ();

  containerClips = sections;

  for (var p:int = 0; p < containerClips.length; p ++)

  {

  trace ("containerClips [" + p + "] is" + containerClips [p]);

  }

  return the container;

  }

  You can also see that I have traces in the service to trace the content and the length of the incoming array.

  It's track of the first time through:

  called prepareContainer!

  sections.length is [object ViewPrevTranClosed_AEM], [medicareHead_AEM object], [object NAMEsubscriberSection_AEM], [object SearchInformationSection_AEM]

  containerClips.length is 0

  sections [0] is [object ViewPrevTranClosed_AEM]

  sections [1] is [object medicareHead_AEM]

  sections [2] is [object NAMEsubscriberSection_AEM]

  sections [3] is [object SearchInformationSection_AEM]

  SX is 0

  SX is 1

  SX is 2

  SX is 3

  containerClips [0] is [object ViewPrevTranClosed_AEM]

  containerClips [1] is [object medicareHead_AEM]

  containerClips [2] is [object NAMEsubscriberSection_AEM]

  containerClips [3] is [object SearchInformationSection_AEM]

  ============================================

  As you can see, the traces in the loops went very well and the result is as expected. The container is filled with the movieclips. However, on the next time through the result is that the background color and none of the movieclips are added to the container. The following trace shows also that the loops did not stand even if the table is full and there is no condition that stop the loops. This is the inside track:

  called prepareContainer!

  sections.length is [object ViewPrevTranClosed_AEM], [medicareHead_AEM object], [object NAMEsubscriberSection_AEM], [object SearchInformationSection_AEM]

  containerClips.length is 0

  Any ideas on what is the cause?

  You can have a circular reference. containerClips is the same table that the sections. Try this simple test:

  array1 = [1,2,3,4] var;

  var array2 = array1;

  array1.splice(0,array1.) Length);

  array1 = [];

  trace (array2. Length);

  I'm sure that you expect to see it trace 4, but it trace 0. Now try to use the line commented out instead. Now you get a record of 4.

  If somewhere in your code you establish sections also point to the same table as containerClips, that you really wanted to duplicate a table, you can use the concat:

  Var items = containerClips.concat ();

  It would be either his own picture double and a pointer to the same table.

• for dysfunction of the loop

  I made this small AS3 practice thing, where you can shoot [with a spaceship] on 'enemies' and get extra points.

  I wanted to make a function that enemy respawns after hitting them.

  I have the spawning enemies using a loop for.

  I also remove the enemies when they are hit.

  the problem now is: for some strange reason, the game keeps spawning enemies and ignoring the loop for...

  
  all variables are defined at the beginning of the script, so I won't include this part:

  These are loops that make enemies spawn

  for (var teller1 = 0; teller1 < 8; teller1 ++) {}
  addvijand1 (null);
  }
  for (var teller2 = 0; teller2 < 8; teller2 ++) {}
  addvijand2 (null);
  }

  
  

  adding the addlisteners

  stage.addEventListener (Event.ENTER_FRAME, drainage); irrelevant for now: it's controls
  stage.addEventListener (Event.ENTER_FRAME, schieten); It's the addchild for balls, with included hittest which removes the movieclip of the ball and the enemy and should lessen bij teller1 and teller2 one.
  stage.addEventListener (Event.ENTER_FRAME, addvijand2); addition of the enemies of type 1
  stage.addEventListener (Event.ENTER_FRAME, addvijand1); addition of the enemies of type 2 //this is basically the same [just forms and colors] type 1 in the code, so I'm not going to include to make it easier to forget.
  

  
  

  function addvijand2 {(evt:Event)}
  var vijand2: MovieClip = new MovieClip();
  vijanden2.push (vijand2);
  vijand2. Graphics.beginFill (0x22FF00);
  vijand2. Graphics.drawCircle (-5, 10, 10);
  vijand2.x = (Math.random () * 260) + 20;
  vijand2.y = (Math.random () * 200) + 10;
  var glow2:GlowFilter = new GlowFilter();
  glow2. Color = 0x22FF00;
  glow2.Alpha = 1;
  glow2.blurX = 20;
  glow2.blury = 20;
  glow2. Quality = BitmapFilterQuality.HIGH;
  vijand2.filters = [glow2];
  addChild (vijand2);
  }

  function schieten (evt:Event) {}
  If {(spaceKeyDown)
  var mc: MovieClip = new MovieClip();
  mc.graphics.beginFill (0xFFCC00);
  mc.graphics.drawCircle (3,3,3);
  var glow: GlowFilter = new GlowFilter();
  Glow.Color = 0xFFCC00;
  Glow.Alpha = 1;
  glow.blurX = 10;
  glow.blurY = 10;
  Glow.Quality = BitmapFilterQuality.HIGH;
  MC.filters = [glow];
  MC.x = mc_schip.x;
  MC.y = mc_schip.y;
  mc.addEventListener (Event.ENTER_FRAME, moving);
  addChild (mc);
  }
  }

  
  

  function moving (evt:Event) {}
  evt. Target.y-= 20;
  for (var teller1:int = 0; teller1 < vijanden1.length; teller1 ++) {//here it searches if the ball hits an enemy of the table, deletes it if necessary.
  

  If ((vijanden1[teller1]!=null) & & (evt.target.hitTestObject (vijanden1 [teller1]))) {}
  MovieClip(vijanden1[teller1]).removeEventListener (Event.ENTER_FRAME, vijand1animatie);
  removeChild (vijanden1 [teller1]);
  Score += 2;
  scoretext. Text = "Note:" + score;
  vijanden1 [teller1] = null;
  teller1 +=-1;
  }
  }
  for (var teller2:int = 0; teller2 < vijanden2.length; teller2 ++) {}
  If ((vijanden2[teller2]!=null) & & (evt.target.hitTestObject (vijanden2 [teller2]))) {}

  
  removeChild (MovieClip (vijanden2 [teller2]));
  score += 10;
  scoretext. Text = "Note:" + score;
  vijanden2 [teller2] = null;
  teller2 +=-1;
  }
  }
  If (evt. Target.y < 0) {}
  MovieClip (evt.target) .removeEventListener (Event.ENTER_FRAME, moving);
  removeChild (MovieClip (evt.target));
  }
  }

  I think that the error is with the stage.addEventListener (Event.ENTER_FRAME, addvijand...);  part, because it is an ENTER_FRAME event, so he adds enemies of each image.

  But even when I move the loops in the functions of addvijand1/2, or change them, while loops, it still does not work...

  What I am doing wrong?

  Since I have nothing better to do here is a more dynamic version with more features. Now enemies explode, and the ship can be moved with the arrow keys left and right. In addition, it eliminates the need for both enemy who makes hit faster detection:

  stop();
  import flash.display.Graphics;
  import flash.display.MovieClip;
  import flash.display.Stage;
  import flash.events.Event;
  import flash.events.KeyboardEvent;
  import flash.filters.GlowFilter;
  import flash.geom.ColorTransform;
  import flash.geom.Transform;
  // reusable instances
  var enemy:MovieClip;
  var bullet:MovieClip;
  // abstract Gprahics
  var g:Graphics;
  // ship speed
  var shipSx:Number = 3;
  // enemy types data
  var enemyTypes:Object = {      enemy1: {color: 0x00CCFF, shape: "circle", radius: 10, speed: 2, score: 2},
                                     enemy2: {color: 0x22FF00, shape: "rectangle", side: 20, speed: 1, score: 10}
                                }
  var enemies:Array = [];
  // loop iterator
  var i:int = 0;
  var score:Number = 0;
  //these are the for loops that make the enemies spawn
  makeEnemies();
  
  stage.addEventListener(KeyboardEvent.KEY_DOWN, onKeyDownHandler);
  stage.addEventListener(KeyboardEvent.KEY_UP, onKeyUpHandler);
  
  function makeEnemies():void {
       for(i = 0; i < 8; i++) {
            enemies.push(makeEnemy("enemy1"));
            enemies.push(makeEnemy("enemy2"));
       }
  }
  
  function onKeyDownHandler(e:KeyboardEvent):void {
       switch(e.keyCode) {
            case 32:
                 addEventListener (Event.ENTER_FRAME, schieten);
            break;
  
            case 39:
            case 37:
                 // set ship move direction
                 mc_schip.dx = e.keyCode == 39 ? 1 : -1;
                 mc_schip.addEventListener (Event.ENTER_FRAME, shipMove);
            break;
       }
  
  }
  
  function shipMove(e:Event):void
  {
       mc_schip.x += shipSx * mc_schip.dx;
  }
  
  function onKeyUpHandler(e:KeyboardEvent):void {
       switch(e.keyCode) {
            case 32:
                 removeEventListener (Event.ENTER_FRAME, schieten);
            break;
  
            case 39:
            case 37:
                 mc_schip.removeEventListener (Event.ENTER_FRAME, shipMove);
            break;
       }
  }
  
  function makeEnemy(type:String):MovieClip {
       var data:Object = enemyTypes[type];
       enemy = new MovieClip();
       g = enemy.graphics;
       g.beginFill(data.color);
       switch(data.shape) {
            case "circle":
                 g.drawCircle(0, 0, data.radius);
            break;
  
            case "rectangle":
                 g.drawRect( -data.side * .5, -data.side * .5, data.side, data.side);
            break;
       }
       g.endFill();
       // add data to the object for further use
       enemy.data = data;
       placeEnemy(enemy);
       enemy.isAlive = true;
       enemy.filters = [glowFilter(data.color)];
       enemy.addEventListener(Event.ENTER_FRAME, enemyMove);
       return enemy;
  }
  
  function enemyMove(e:Event):void
  {
       enemy = MovieClip(e.target);
       enemy.y += enemy.data.speed;
       if(enemy.y > (stage.stageHeight + 10)) placeEnemy(enemy);
  }
  
  function placeEnemy(enemy:MovieClip):void {
       enemy.x = Math.random() * stage.stageWidth;
       enemy.y = Math.random() * -100;
       addChild(enemy);
  }
  
  function schieten(e:Event):void {
       bullet = new MovieClip();
       bullet.graphics.beginFill(0xFFCC00);
       bullet.graphics.drawCircle(0, 3, 3);
       bullet.filters = [glowFilter(0xFFCC00, 10)];
       bullet.x = mc_schip.x;
       bullet.y = mc_schip.y;
       bullet.addEventListener(Event.ENTER_FRAME, moveBullet);
       addChild(bullet);
  }
  
  function moveBullet(e:Event):void {
       bullet = MovieClip(e.target);
       bullet.y -= 20;
       bewegen(bullet);
       if (bullet.y < 0) {
            bullet.removeEventListener(Event.ENTER_FRAME, moveBullet);
            if (contains(bullet)) removeChild(bullet);
       }
  }
  
  function bewegen(bullet:MovieClip):void {
       // for each loop is faster
       for each(enemy in enemies) {
            if (bullet.hitTestObject(enemy)) {
                 // allows any bullet to die in exlosion
                 // although only first hit adjusts score
                 if (enemy.isAlive) {
                      enemy.isAlive = false;
                      enemy.addEventListener(Event.ENTER_FRAME, explode);
                      var trans:ColorTransform = new ColorTransform();
                      trans.color = 0xFFB895;
                      enemy.transform.colorTransform = trans;
                      score += enemy.data.score;
                 }
                 // bullet is used only once
                 removeChild(bullet);
                 bullet.removeEventListener(Event.ENTER_FRAME, moveBullet);
                 bullet = null;
                 // exit loop
                 break;
            }
       }
       scoretext.text = "Score: " + score;
  }
  
  function explode(e:Event):void {
       var eo:MovieClip = MovieClip(e.target);
       eo.alpha -= .3;
       eo.scaleY += .5;
       eo.scaleX += .5;
       if (eo.alpha <= 0) {
            // retuen to original state
            eo.isAlive = true;
            eo.transform.colorTransform =  new ColorTransform();
            eo.removeEventListener(Event.ENTER_FRAME, explode);
            placeEnemy(eo);
            eo.alpha = eo.scaleY = eo.scaleX = 1;
       }
  }
  
  function glowFilter(color:uint = 0x00CCFF, blur:Number = 20):GlowFilter {
       var f:GlowFilter = new GlowFilter();
       f.color = color;
       f.alpha = 1;
       f.blurX = blur;
       f.blurY = blur;
       f.quality = BitmapFilterQuality.HIGH;
       return f;
  }
  

• Pages 5.6.2, cannot highlight and change the color of the text?

  I use pages 4.3 and earlier of passage to 5.6.2 - I just tried to highlight a word in a document and change the color - nothing happened.  Tried selecting the color first, and then type a new Word and that doesn't work either.  Am I missing something?  Is there any quick way to the color of the text in 5.6.2?

  To well highlight a word or a selection of words in the v5.6.2, Pages you will need to select the text, click the image below on the gear watch icon and set the fill color of your character. To remove the highlight, select your text, click in the ink of fill color of characters and click transparency icon in the lower right.

  

• change the color of the title effect

  For this example of a readymade title:

  

  I would like to know how I could change the color (red) behind the title of the text.  Let's say, I would like the blue instead, or yellow, or anything else.  I tried a number of ways (just getting used to FCP X).  Y at - it a command for this, or should I make a mask with a different color?  Problem is red is lively, and a mobile mast would be required... sort of complicated as a procedure.  BTW, how these securities were made?  In another program, or can they be changed in it?

  2nd question: How can I extend the follow-up of this text as a sequence of animation?  I tried to change the follow-up by degrees and adding images key, but it does not work.  In other words, when you see the title, shown above, I would like to extend then follow-up.

  Thank you.

  As for the above, I just tried to open the color Board and find I can indeed change body color (see screenshot), but the photo image is also affected by the change of color.  How do I get the color of the title change and keep the color of the photo?

  

• New update feature Logic-rod of color of the region

  I deal with as a result of the projects on a daily basis. And I would be DELIGHTED If logical offered a feature for bounce comes from the color of the region.

  Currently, I have all parts of color according to the stem. Yellow = brass, Brown = string, Orange = Perc Low, etc.. I select a region, Ctrl + C to select all regions of same color, Ctrl + S for all selected regions in solo. Go to an empty bar at the beginning of the project to clear the cache of any release of the bonded sample, enable cycle and rebound. Wait 10 minutes for it to bounce. Repeat 12 times more.

  I'd like a command that tells, rebound derives from the color of the region. So logic would automatically create these rods and automate this process, so I can go off and do something else, back in 120 minutes and did everything instead of custody of her.

  Please make sense! Thank you!!

  Basically, you export titles as the stems.  It's already easy enough to do.  In addition, this is not the place to request new features, as it won't do anything good.   There is a feedback page that Apple does actually read and follow.  In the Logic Pro X menu, select the option to return.

• How can I change the background color of the sidebar bookmarks?

  Grayish brown (I think) background color does not work for me. I'm a little color blind and the cursor to highlight the selected tab is not enough for me to easily see contrast. I found how to change all kinds of colors in FF, but not the background color of the bookmarks bar. I would like to change the background may be blank.

  I have it! My eyes thank you very much for your help!

• Excel AppleScript set the color of the tabs

  Hi all

  I would like to know how to target the object of the tab sheet in Excel to define its color index.

  For example the color of the "Sheet2" tab index value 3 - yellow

  Something like this:

  the value (color index of sheet tab of worksheet "Sheet1" of the workbook "Book1" ") à 6

  (Note, on my machine at least, yellow is index 6)

  I also noticed that the color of the screen does not update dynamically.  I had to click on the tab to see the change.

• Color on the back of the phone goes on case

  So I bought the iPhone SE it is almost usable but it's just that I have this transparent case for it and I used it for 1/2 months and the color of the phone is now on my transparent case. I don't know if it's normal and I'm quite concerned that after a few months the rose gold will go and a silver medal appears on the back. Contact Apple or is it a normal thing?

  Since your unit is still under warranty, visit an Apple Retail Store or Apple authorized service next to your location provider and show them your phone and if you bought it.

  They will tell you more about the reason for this and your service options.

  You can also contact the Apple Support on it to send it in, but as you send usually not incidental with the phone, it could be complicated to let them take a look at the protective case.

  Launch a service request

  Find an Apple authorized service provider

  Make an appointment at the Apple Store

• cannot add emoticons or change the color of the text when you write a message to send

  When I type a message to send. I can't change the color of the text, or if I add an emoticon. I can change the size of the letter, featuring bold, italic and underlined.

  If you mean an e-mail message, Firefox is not 'do' by email.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, let know us and we can move this thread to the queue of Thunderbird. This issue is currently in the queue of Firefox to get answers.

• Thunderbird is stuck in the loop. Can not stop in the Task Manager.

  links will not open in thunderbird. I followed the instructions in this link: http://www.ghacks.net/2013/01/20/fix-for-thunderbird-not-opening-links/.
  After you set the 3 True values, I left and restarted thunderbird.
  I then clicked on a link in an e-mail message and the LAUNCH APPLICATION box appeared.
  I accidentally entered "thunderbird" instead of "firefox".
  When I clicked on the link in the e-mail, it goes into a loop where the hourglass icon will flash constantly.
  I couldn't go back to the LAUNCH APPLICATION window to change.
  Then, I deleted the Thunderbird folder in program files and reinstalled thunderbird OK.
  Everything works fine until I click on a link in a message. He then goes into the loop, and I have to restart.
  Is there something in the registry that I can change to fix this?
  Thanks for any help you can offer.
  Kind regards
  Geoff Wight

  Go to the menu Tools (alt + T) > options > attachments and delete any reference to Thunderbird.

  Change the preferences to their default values. by https://support.mozilla.org/en-US/kb/Hyperlinks-in-Messages-Not-Working#w_check-for-an-incorrect-preference then you can read any article that the incorrect pref is usually only a question after using the Thunderbrowse add-on.