Color PIXMA iP 3000 problems

Similar Questions

• I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  Thanks Ray,

  Hello... How can I get the manual download for all the error on any printer laser color spray top of HP range.

  Kind regards

  Monday Nwankwo

• Canon Pixma MP800 printing problem

  I use Windows XP Professional.  I have a Canon Pixma MP800, who has been a very reliable workhorse for many years.  Right now when I print a Word document using a black ink only, it is printing in the layers of alternative 1 cm of the impression of light and darkness which looks like that I chose to print alternatively in "BOLD" and normal print.  When I print the same Word document using colors, it prints very well.  I tried to do a nozzle check, cleaning, and a clean, none have worked in depth.  I also removed the print head and cleaned in a solution without success.  All ink cartridges are full of ink.  When I do a test print, the top of the marked test PGBK page, displays the first cm to cross the lines perfectly, but the second cm vertical lines of lines alternating with areas of verticle.  Printing from Excel has the same problem.

  Someone had this problem?

  Looks like you have tried all the usual suspects.  It's time to contact Canon support; It is not a Windows problem.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp800#ServiceAndSupport

  Other possibilities:
  http://www.fixyourownprinter.com/
  http://www.nifty-stuff.com/forum/viewforum.php?ID=4

• Omen 5012: omen 5012 update firmware, color of backlight keyboard problems

  When upgrading F.09 to F.23, the ability to control the colors of the keyboard backlight went, as explained by OP.

  When you check the available firmware updates, Support of HP Advisor has shown new firmware and 3 other downloads, as of July 30. Then I pressed, check the updates and all entries have disappeared, now HPSA says there is no update available.

  In any case, where can I download the latest firmware and has this problem fixed the inability to control the colors of the keyboard backlight.

  Omen of control works with 10 Windows with the event system utility that was released yesterday. See the thread below.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-omen-control-software-no-longer-works-after-Windows-10/TD-p/5169933

• Power on the Satellite Pro 3000 problem

  Wives Satellite S3000 has developed what appears to be a power problem

  Last night it started indicating that he doesn't have the power of the DC input... This seemed to be a fault of internittent stirring casued DC input light to return cable. Taking the DC Jack off main cable, I discovered that one of the two pins was broken.

  Is out today and bought a new 5.5mm/2.5mm DC Jack and reconnected thinking that everything would be OK... but there is no response from the laptop... the DC input light does not come on and neither does the indicator "charging battery".

  A multimeter indicates there is 19v DC decision-making.

  It seems to me that there may be an internal power problem. Otherwise there may be a problem with the power with respect to the current delivery.

  A battery totally buggered may this "non-response"? I expect the laptop to operate on DC power regardless of the internal State and secondary battery.

  Ideas appreciated... will see if I can alternative power source and try it before resorting to delve into the bowels of the thing!

  Thank you

  Hello

  > A battery totally buggered may this "non-response"? I expect the laptop to operate on DC power regardless of the internal State and secondary battery.

  The laptop should run without battery. If the adapter is ok and if it was connected to the laptop, then it should be possible to start the machine.

  If the laptop does not start, then it must be a hardware problem.
  But believe me; It's not easy to say what exactly is the problem.

  Maybe you bought only a bad power adapter that is not compatible with the Sat Pro 3000?
  Or maybe there is something wrong with the electronic power supply on the motherboard?
  Who knows?  :| Only the technician who checked the laptop can provide an exact error diagnostic.

• HP LaserJet 200 color MFP m276: HP LaserJet 200 color MFP m276nw - scaning problem

  Dear gentlemen/ladies, Documents on the flatbed scanner / / UH m276 Color MFP HP LaserJet 200 cannot be scanned in the network folder, scanner, in my office by WiFi. He keeps giving the error message "username or password is incorrect. This user account and password are valid. "Please note that the wireless test is successful. A such problem, until the desktop computer (some bad sectors on the hard disk) has been repaired at the shop of the computer a week ago. However, I can use apps in my office to print and use the HP LJ200 M276 Scan to scan documents on the printer tray and save it in any folder remotely via WiFi. Please please advise solution/method that I can do to solve this new problem. Stephen

  Hi @U-Talents.

  Welcome to the Forums of HP Support! I read your post and see that you are not able to scan to network folder. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I have provided a document to configure the scan to network folder. Follow the steps, there is a section to create the folder and set up the sharing and security:Scan of the control panel (including Scan to Email, in PDF format, and to a network folder) for HP LaserJet Pro 200 Color MFP M276n and M276nw.

  This post is @wardell1, it can also help with this error message: try to configure the scan to network folder, name of user and password is incorrect. Do not take into account the model.

  I have also provided a @ShlomiLstation, on the same issue: scan to network folder fails.

  Try these documents to see if they help, and if there is anything else I can do, let me know. Thank you.

• Color Laserjet Pro M476dw MFP: HP Color Laserjet MFP printing problems M476dw Pro

  Only, we installed our printer HP Color Laserjet Pro MFP M476dw yesterday and I noticed once it is published a PCL XL Error report instead of what I was printing.  I don't think that anything from him, but today, it happens almost all the time.  I tried to find possible solutions and stumbled upon everyone says to disable AVG...  We do not use AVG, we use MSE.  Is it a driver problem or else?  Any help would be appreciated.  Nothing more annoying than to try to use a new printer and it is not working properly.

  I went to the site HP dl had the HP Universal 5 driver and installed it and now it's printing even more crazy.  I enclose a photo of what he does.  It is not fair to Quickbooks, it does also in PDF, Word, and Outlook.

  

  I shouldn't have as many problems with ANY NEW MACHINE!

  The trainer would be relatively easy to replace, from what I've read your machine should be guaranteed if you need to contact HP support and they can send you another.

  You might even be able to find an authorized service provider who will come out and fix it.

  And if its brand new and you bought it in a store to resume.

• HP Color LaserJet CP3525 - printing problem

  Having a problem after printing color image.

  Printer has been improved for the latest firmware, reset and NVRAM made calibration.

  The formatter Board has also been reinsterted, but the problem persists.

  Help, please!

  thnx

  Thank you for your review. I really appreciate it.

  Yesterday, I tried printour with another trainer, and the printer works normally, the impression is great.

  On my faulty formatter Board, I pressed the main processor/chip to the Commission of trainer, and now my defective Panel is still alive. Printing is normal.

  I came to the main conclusion of that chip is not well soldered, I mean over time, the weld joint is lost efficiency.

  Today I have to resolder the chip with hot air station.

  Printer has about 146000 printed pages. I read somewhere that the life of the ITB is 150000 pages. What happens after 150000 pages. Will be the said printer ITB to change or there will be a warning or something else?

  BR

• Officeject 6830 Pro: Color Officejet Pro 6830 problems

  I have problems with the Officejet Pro 6830, I can't get the color red and purple to print on all my documents, instead of Red that I get pink and violet, I get blue.

  Hi @Chantilly005.

  Welcome to the Forums of HP's Support. I understand that you have a problem with print quality. I would like to help.

  Try to go through the following troubleshooting document. HP Officejet Printers - the problems of poor print quality

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• DeskJet 3050: Tri-Color Ink Cartage error problem

  Hello, I just got a new printer from a friend to me as a gift. I got it February 25, 2015, just if you know the date. It was brand new, never opened. I opened and set up everything, programmed to my computer online through Windows 8. Some information in case you need it, but the problem is that I noticed that whenever I turn on the printer an error appears on the printer screen saying Cartage problem three ink colors. So, I opened the drawer that reveals the ink cartages, and look around, nothing seems to be wrong. Then I close the drawer and the error goes away and I'm able to print. This happens everytime I turn on the printer. Yes, is there something wrong? Should I ask a new cartage ink because it is still full? Is it harmful to my new printer? What is the real problem and solution? THANKS in advance.

  -Gabby

  Hi Gabby!

  If the error message is no longer present, I think that the problem is resolved and you are sure to continue to use your printer.

  If the error returns, repeat the same troubleshooting steps and call us again if the problem doesn't go away.

  Enjoy the rest of your week!

• Background color with sticky notes problem

  I have a weird problem with sticky notes. It works well, but the background color of the text entry box remains white, despite the color you choose. If you choose any color, borders will change, but the input area stays white. Any thoughts on how to solve it?

  Hi FabioFreitas,

  The problem may be related to corrupted application files. To solve this kind of issue, I would propose the following suggestions.

  Method I have
  1. open a command prompt to run the following command to repair the corrupted system files.
  (a) click the Start button and type "Command Prompt" in the search box.
  (b) right click on command prompt to run as an administrator.
  (c) Type: sfc/scannow to scan the entire drive.
  2 copy the StikyNot.exe since another available on the current computer operating system.

  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833

  Method II 
  If the method above does not help to create a new user account and check, if it solves the difficulty of the corrupted user profile issue.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem does not occur in the new account user set your user account corrupted. The steps to fix the corrupt user account is given below.
  Fix a corrupted user profile.
  http://Windows.Microsoft.com/en-in/Windows7/fix-a-corrupted-user-profile

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Print Page of cleaning HP Color Laser Jet CP1215 problem

  I have a HP Color Laser Jet CP1215 connected to a Windows7 64 bit operating system. The printer prints the shadows cast on the left and right of the paper edges, but also the light shadows in the printing.  I saw the HP Toolbox for my printer and tried to print a cleaning page.  All I get is a text box indicating that the printer could not be accessed, even if it will calibrate and print a test page. I need different drivers or is there another solution?

  Hi eitooc,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you found shadows on the page when printing.

  I'll be happy to help you.

  The driver may be corrupted not allowing all the features work.

  There could be a problem with the toner or the fuser unit causing this problem.

  Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer. Try running Cleanup again.

  Here is a document to solve problems of quality Print. Follow the steps to see if that will help solve the problem.

  If you still have problems you can uninstall and reinstall the latest version of the software.

  HP Color LaserJet CP1215 Printer Drivers. Select the operating system, and then click Next.
  Click on driver - product Installation software and download the drivers.

  Then try to re-run the cleanup page.

  This happens with all applications?

  What kind of paper do you use?

  You use genuine HP toner?

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a great weekend!

• Connection VPN concentrator 3000 problem

  Hi all

  I hope that u all experts will be able to help me through this time thick. Our VPN 3000 Concentrator admin password has been changed by someone in order to reset the password using directly by serial cable, now the problem is it allows me to connect with admin console but not via the web administration or telnet interface. I have activated access telnet and http, but always without success. Concentrator uses the internal database so no AAA server is configured.

  Can someone help me please thanks to this?

  Kind regards

  The console password should be the same as the telnet and HTTP password.

  The problem doesn't seem to be on the password.

  Please check under: Administration--> access--> access control list--> and check if your IP is in the list. If this isn't the case, please add your IP address/subnet to the list for you HTTP access to the VPN concentrator.

• Windows 7 Home Premium - Epsom Stylus Color 880 printer inkjet problem

  I'm under Windows 7 Home Premium using a printer Epsom Stylus Color 880 ink jet, fortunately so far when, without apparent reason, all lights started flashing on the printer. (inks, papers and power) I, ve tried switching off the power etc, but nothing helped. I dug the original disc to see if I could reinstall the software, but a message pops up saying that the system is not compatible. No problems so far and I've used the same Acer laptop now for a few years without no problem installing printer. Any ideas on what could have happened, are there drivers I can download on the thought that there is a corrupt file somewhere I also checked and there seems to be no jams etc.. Thank you

  Hi Eckiemo,

  ·         Did you do changes on the computer before the show?

  ·         What is the exact full error message?

  ·         Are you able to print from the printer?

  This product is discontinued, is replaced by a new one.

  EPSON Stylus Color 880 Ink Jet Printer

  Follow these methods.

  Method 1: Follow the steps in the article.

  Printer in Windows problems

  Method 2: Do a System Restore and check.

• Color in Photoshop CC problem

  Previous have a question about a color problem. When I export from lightroom I use the profile proRGB and I have the same in PS, but sometimes I have this Green or magenta colorcast when I discover the image in PS, but I see not in LR and when I open cab to his party... PS what hell can be the problem?

  You should also check Anvand mina innstallningar for den har enheten (use my settings for this device)