Combine two tables using Actionscript Flex Applications errors

Hello

I have a set of Actionscript code below that I would run based on a query and have it display what are all of the selections that I posted from the checkbox elements two repeater.

This doesn't seem to work every time when I get to the checkBox_change2 function. I still see some error messages popping up telling me that I have references null to that particular line: var selArr3:Array = selArr2.concat (selArr);

Could someone tell me how I can get checkBox_change2() don't forget the selections, I did in checkBox_change()? I tried to use public var for the [Bindable] above but I still get the same error.

Thanks in advance.

Alice

You are declaring your selArr not always correctly.
The statement [Bindable] private var selArr:Array; is an instance variable. It is defined outside of any function and is visible from almost anything in your object.

In your service
private void checkBox_change(evt:Event,x:Array):void {}
selArr:Array = [];

selArr is defined as a local variable that is visible only in the function checkBox_change. Because the names are the same that you override the instance variable. (In reality this is not compiling correctly... your first try for var selArr:Array = [] was the valid syntax for the variable substitution)

To remedy this, you just need to change
selArr:Array = [] in selArr = [];

Tags: Flex

Similar Questions

  • Combine two tables 1 d in a 2D array

    Hi all

    Maybe I forget what is obvious, but I can't find a solution to combine two tables 1 d in a 2D array AND (it is the impossible part for me) using the tables columns instead of lines.

    Example:

    Table 1:1, 2, 3, 4

    Table 2:5, 6, 7, 8

    Result: 1, 5

    2, 6

    3, 7

    4, 8

    The 'build array' function seems to add all tables as lines... I guess I could transpose the table, but I want it runs in a Subvi in constructions of different loop and I feel a little uncomfortable with it - I guess one would be left with a completely mixed table. I was maybe blind just to find the right function?

    Cheers, Jessi

    Hi Jessi,

    by default, LV is combining tables in rows. So when you need columns you must transpose the sets or use a different indexing scheme...

  • combining two tables

    Hello

    I have a while loop that runs trough each case in a box structure. Each of these cases produced a 1 d table. How can I combine these tables in a 2d array. An attempt with two cases is attempted in the attached diagram.

    The problem is it seems to fill the first column with zeroes when you add the second row in table

    Hi Jagwa,

    first: use a registry to offset instead of tunnels. In this way, the result of the first iteration is not lost in the 2nd

    "It seems to fill the first column with zeroes" - no, just the table of origin once again, but now by replacing the second row!

    2nd:

    When your loop runs twice, all the time why not use a FOR loop instead? No need to check for "I".<>

  • SQL Loader loading data into two Tables using a single CSV file

    Dear all,

    I have a requirement where in I need to load the data into 2 tables using a simple csv file.

    So I wrote the following control file. But it loads only the first table and also there nothing in the debug log file.

    Please suggest how to achieve this.

    Examples of data

    Source_system_code,Record_type,Source_System_Vendor_number,$vendor_name,Vendor_site_code,Address_line1,Address_line2,Address_line3

    Victor, New, Ven001, Vinay, Vin001, abc, def, xyz

    Control file script

    ================

    OPTIONS (errors = 0, skip = 1)
    load data
    replace
    in the table1 table:
    fields ended by ',' optionally surrounded "" "
    (
    Char Source_system_code (1) POSITION "ltrim (rtrim (:Source_system_code)),"
    Record_type tank "ltrim (rtrim (:Record_type)),"
    Source_System_Vendor_number tank "ltrim (rtrim (:Source_System_Vendor_number)),"
    $vendor_name tank "ltrim (rtrim (:Vendor_name)),"
    )
    in the Table2 table
    1 = 1
    fields ended by ',' optionally surrounded "" "
    (
    $vendor_name tank "ltrim (rtrim (:Vendor_name)),"
    Vendor_site_code tank "ltrim (rtrim (:Vendor_site_code)),"
    Address_line1 tank "ltrim (rtrim (:Address_line1)),"
    Address_line2 tank "ltrim (rtrim (:Address_line2)),"
    Address_line3 tank "ltrim (rtrim (:Address_line3)).
    )

    the problem here is loading into a table, only the first. (Table 1)

    Please guide me.

    Thank you

    Kumar

    When you do not provide a starting position for the first field in table2, it starts with the following after a last referenced in table1 field, then it starts with vendor_site_code, instead of $vendor_name.  So what you need to do instead, is specify position (1) to the first field in table2 and use the fields to fill.  In addition, he dislikes when 1 = 1, and he didn't need anyway.  See the example including the corrected below control file.

    Scott@orcl12c > test.dat TYPE of HOST

    Source_system_code, Record_type, Source_System_Vendor_number, $vendor_name, Vendor_site_code, Address_line1, Address_line2, Address_line3

    Victor, New, Ven001, Vinay, Vin001, abc, def, xyz

    Scott@orcl12c > test.ctl TYPE of HOST

    OPTIONS (errors = 0, skip = 1)

    load data

    replace

    in the table1 table:

    fields ended by ',' optionally surrounded "" "

    (

    Char Source_system_code (1) POSITION "ltrim (rtrim (:Source_system_code)),"

    Record_type tank "ltrim (rtrim (:Record_type)),"

    Source_System_Vendor_number tank "ltrim (rtrim (:Source_System_Vendor_number)),"

    $vendor_name tank "ltrim (rtrim (:Vendor_name)).

    )

    in the Table2 table

    fields ended by ',' optionally surrounded "" "

    (

    source_system_code FILL (1) POSITION.

    record_type FILLING,

    source_system_vendor_number FILLING,

    $vendor_name tank "ltrim (rtrim (:Vendor_name)),"

    Vendor_site_code tank "ltrim (rtrim (:Vendor_site_code)),"

    Address_line1 tank "ltrim (rtrim (:Address_line1)),"

    Address_line2 tank "ltrim (rtrim (:Address_line2)),"

    Address_line3 tank "ltrim (rtrim (:Address_line3)).

    )

    Scott@orcl12c > CREATE TABLE table1:

    2 (Source_system_code VARCHAR2 (13),)

    3 Record_type VARCHAR2 (11),

    4 Source_System_Vendor_number VARCHAR2 (27),

    5 $vendor_name VARCHAR2 (11))

    6.

    Table created.

    Scott@orcl12c > CREATE TABLE table2

    2 ($vendor_name VARCHAR2 (11),)

    3 Vendor_site_code VARCHAR2 (16).

    4 Address_line1 VARCHAR2 (13),

    5 Address_line2 VARCHAR2 (13),

    Address_line3 6 VARCHAR2 (13))

    7.

    Table created.

    Scott@orcl12c > HOST SQLLDR scott/tiger CONTROL = test.ctl DATA = test.dat LOG = test.log

    SQL * Loader: release 12.1.0.1.0 - Production on Thu Mar 26 01:43:30 2015

    Copyright (c) 1982, 2013, Oracle and/or its affiliates.  All rights reserved.

    Path used: classics

    Commit the point reached - the number of logical records 1

    TABLE1 table:

    1 row loaded successfully.

    Table TABLE2:

    1 row loaded successfully.

    Check the log file:

    test.log

    For more information on the charge.

    Scott@orcl12c > SELECT * FROM table1

    2.

    RECORD_TYPE SOURCE_SYSTEM_VENDOR_NUMBER $VENDOR_NAME SOURCE_SYSTEM

    ------------- ----------- --------------------------- -----------

    Victor Ven001 new Vinay

    1 selected line.

    Scott@orcl12c > SELECT * FROM table2

    2.

    $VENDOR_NAME VENDOR_SITE_CODE ADDRESS_LINE1 ADDRESS_LINE2 ADDRESS_LINE3

    ----------- ---------------- ------------- ------------- -------------

    Vinay Vin001 abc def xyz

    1 selected line.

    Scott@orcl12c >

  • Camera in use by another application error message.

    I can't use the camera on my PC - he said it is used by another application - how can I fix this please?

    Hello

    A program that uses the camera is always either running (and must be closed) or does not
    release the camera when it closed. One program can use the camera at a time.

    1. reboot to see if that helps.

    2 see if you can determine what program he used take he did not communicate.

    3 if necessary check in (right-click the taskbar) Task Manager - process to see if any of the
    programs unit photo is still ongoing - If yes do a right click on it and end task.

    4 you can have something opening at startup that uses the camera (check in the Task Manager).
    If so, whether you want to stop to start. If you notice a particular program is causing the
    verification of the issue with his support.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Query combining two tables

    I have the following two tables:

    Asset_Issued

    Asset_Type_IDAssigned to
    1RAM
    2RAM
    3RAM
    4RAM
    5RAM
    1Riadh
    3Riadh
    5Riadh
    1Rajesh
    3Rajesh
    2Rajesh

    Asset_Type

    Asset_Type_IDAsset_Name
    1Laptop
    2Desktop
    3Mouse
    4Keyboard
    5Monitor

    Can someone help me with the query that will give the following result.

    Asset_Issued_Count

    Asset_NameCounty
    Laptop3
    Desktop2
    Mouse3
    Keyboard1
    Monitor1

    Really? It's really basic things.

    Select at.asset_name, count (*)

    of asset_type to

    Join asset_issued HERE on (ai.asset_type_id = at.asset_type_id)

    At.asset_name group;

  • Left join between two tables using two different conditions

    I have following three tables with their data, as shown below.

    CREATE TABLE TIREMASTERPROCESS_TEMP
    (
    PRODUCTIONCODE TANK (12 BYTES),
    FIELDNAME CHAR (12 BYTES),
    DATACHR VARCHAR2 (60 BYTE),
    REVISIONNO TANK (3 BYTES),
    DATANUM NUMBER (9.4)
    )
    Whether the table c. and its sample data are like

    FIELDNAME DATACHR REVISIONNO DATANUM PRODUCTIONCODE
    AB No. Nch 1 100 0
    AB No. Nch 1 108 0
    AB No.-of-Nch 1 1 0
    Ass42 teased dishes 1 0
    Ass42 BTDrumNo1 BTD-051 1 0
    AB53 BTDrumNo1 BTD-051 104 0


    CREATE TABLE materialcode
    (
    UPPERMATERIALCODE CHAR (20),
    PROCESSNO TANK (3),
    PROCESSADOPTDATE TANK (9)

    )
    Whether the table b. and its sample data are like

    UPPERMATERIALCODE PROCESSNO PROCESSADOPTDATE
    Ass42 1 20120717
    AB53 108 20121121
    111 20111104 AS05
    104 20120928 AS30


    CREATE TABLE BUILDINGSCHEDULEMASTER
    (
    BUILDINGSIZE TANK (5 BYTES),
    GTCODE FLOAT (4 BYTES),
    TIREPERCART NUMBER (3.0).
    BUILDINGLOT NUMBER (3.0)
    )
    Whether table and its sample data are like

    BUILDINGSIZE GTCODE TIREPERCART BUILDINGLOT
    AB42A 4 12 ass42
    AB53A 4 88 AB53
    AS30A AS30 4 80
    BF03A 1 90 BF03


    Now, I need to get some data in these fields by using the suite of mappings.

    « PR_ » || Trim (a.BUILDINGSIZE) | ' / MPL2' Processid,--PRIMARY KEY
    TO_DATE (substr (NVL(b.PROCESSADOPTDATE,'19800101'), 7, 2) |) » /'|| SUBSTR (NVL(b.PROCESSADOPTDATE,'19800101'), 5, 2) | » /'|| SUBSTR (NVL(b.PROCESSADOPTDATE,'19800101'), 1, 4). (' 01:00:00 ',' dd-mm-yyyy hh24:mi:ss') starteff, to_date (SUBSTR (NVL(b.PROCESSADOPTDATE,'19800101'), 7, 2) |) » /'|| SUBSTR (NVL(b.PROCESSADOPTDATE,'19800101'), 5, 2) | » /'|| SUBSTR (NVL(b.PROCESSADOPTDATE,'19800101'), 1, 4). (' 01:00:00 ',' dd-mm-yyyy hh24:mi:ss') startDate.
    b.PROCESSNO revisioncodeid,
    a.BUILDINGLOT tirepercart ,
    CASE WHEN c.FIELDNAME = 'BTDrumNo1' then c.DATACHR end drumtype1.
    BOX WHEN (trim (C.DATACHR) = '1' and trim (C.FIELDNAME) = "No. Nch") and THEN click 'YES '.
    ANOTHER 'NO '.
    END may-BUG,
    case
    When c.FIELDNAME = 'Wavy'
    AND c.DATACHR = 'Use' THEN on 'YES '.
    When c.FIELDNAME = 'Wavy'
    AND c.DATACHR <>'Use' THEN 'NO '.
    fine wavy


    Now for the tables A and B I have the simple join as condition

    a.GTCODE = b.UPPERMATERIALCODE

    But I have to use two different left join conditions to join the table B and C to calculate the RESP fields according to the condition.
    Now, I have to use

    (trim (b.UPPERMATERIALCODE)). » -'|| Trim (b.PROCESSNO) = Trim (c.PRODUCTIONCODE) | » -'|| Trim (c.REVISIONNO)

    condition to get the data for the WAVY and DRUMTYPE1 fields.

    But at the same time, I have to use

    substr (Trim (b.UPPERMATERIALCODE), 1, 2). » -'|| Trim (b.PROCESSNO) = Trim (c.PRODUCTIONCODE) | » -'|| Trim (c.REVISIONNO)

    conition to derive the CHAFER field.

    And for this reason I am come so many duplicates and do not correct results for JUNEBUG, WAVY, DRUMTYPE1, and STARTDATE field.

    I need some advice as how can I do so that I get the correct results without duplicates for the PRIMARY KEY.

    Thank you

    Mahesh

    It would have been easier to answer if you gave us your example query that gives incorrect results - which both show us what you are doing and give us a starting point.
    Insert instructions for data, rather than only the data would have helped too, making it more quick to test this point.
    You do not show what you have done with your two outer join criteria, but I think you need to list TIREMASTERPROCESS_TEMP in your query twice, with alias names. Here's what I did:

    select a.BUILDINGSIZE, a.GTCODE, b.PROCESSNO ,  c1.FIELDNAME, c1.DATACHR, C2.FIELDNAME, C2.DATACHR
, CASE WHEN c1.FIELDNAME='BTDrumNo1' then c1.DATACHR end drumtype1
, CASE WHEN (trim(c2.DATACHR) = '1' and trim(c2.FIELDNAME) = 'No-of-Nch') THEN 'YES' ELSE 'NO' END CHAFER
, case when c1.FIELDNAME='Wavy' AND c1.DATACHR='Use' THEN 'YES'
       when c1.FIELDNAME='Wavy' then 'NO' else null end wavy
from BUILDINGSCHEDULEMASTER        A
join materialcode b on a.GTCODE=b.UPPERMATERIALCODE
left outer join TIREMASTERPROCESS_TEMP c1
   ON trim(b.UPPERMATERIALCODE)||'-'||trim(b.PROCESSNO) = trim(c1.PRODUCTIONCODE)||'-'||trim(c1.REVISIONNO)
left outer join TIREMASTERPROCESS_TEMP c2
   ON substr(trim(b.UPPERMATERIALCODE),1,2)||'-'||trim(b.PROCESSNO) = trim(c2.PRODUCTIONCODE)||'-'||trim(c2.REVISIONNO)

    C1 is an alias for the TIREMASTERPROCESS_TEMP line which is necessary for drumtype1 and wavy, c2 is an alias for the TIREMASTERPROCESS_TEMP line required for JuneBug. There was some minor errors in your calculations of field I tried to correct.

    The results are:

    BUILD GTCO PRO FIELDNAME    DATACHR    FIELDNAME    DATACHR    DRUMTYPE1  CHA WAV
----- ---- --- ------------ ---------- ------------ ---------- ---------- --- ---
AB53A AB53 108                         No-of-Nch    1                     YES
AB42A AB42 1   BTDrumNo1    BTD-051    No-of-Nch    1          BTD-051    YES
AB42A AB42 1   Wavy         NotUse     No-of-Nch    1                     YES NO
AS30A AS30 104                                                            NO

    Hope this helps,
    David

  • How to combine two tables: table of origin and its values of interpolation table

    We get a new array of values after using the interpolation on a table function in labview, but how to combine the array of values and this original interpolated set of values in a single table?


  • Select this OPTION to generate XML data from the table using XMLELEMENT, XMLAGG gives error ORA-19011 string buffer too small

    My select statement fails with the error:


    The ORA-19011 string buffer too small


    The select statement looks like:


    SELECT TO_CLOB)

    XMLELEMENT ("accounts",

    XMLELEMENT ("count",

    XMLATTRIBUTES)

    rownum AS "recordId."

    To_date('20130520','YYYYMMDD') AS "datestarted."

    123456 AS "previousBatchId."

    56789 AS 'previousRecordId '.

    ),

    ....

    .... .

    .....

    XMLFOREST)

    SIG_ROLE AS "SignatoryRole."

    To_char(TRANSFER_DATE,'YYYY-mm-DD') AS "TransferDate."

    NVL(Reason,0) AS 'reason '.

    ) AS the 'transfer '.

    )

    ()) AS CRDTRPT

    OF ANY_TABLE;

    • It looks like I can choose only 4000 characters using the SELECT statement (please, correct me if I'm wrong)

    I'd use the XMLGEN package. But the environment team says no mounted drives in the future with the arrival of the EXADATA.

    NO HARD DRIVE MOUNTED, NO ACCESS TO THE DATABASE DIRECTORIES

    No UTL_FILE

    I need to use the REEL spool the resulting XML data of the SELECT query.

    SQL is a standard in my org, but I can do with a PL/SQL solution also to load data into a table (cannot use a COIL with PL/SQL)

    What I do is:

    1. a column of type CLOB to a xml_report of the loading of the above SELECT query table
    2. Then using SELECT * FROM xml_report to SPOOL the data to a file report.xml

    No need of XMLTYPE data behind. Xml data stream is fine for me.

    In addition, I need to validate the XML file, also using XSD.

    Problem is that the resulting lines of the select query are supposed to be from 15000 to 20000 bytes long.

    Oracle database version: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

    A Suggestion or a solution to this problem would be appreciated.

    (Sorry for the use of "BOLD", just to make it more readable and highlight the imp points)

    Bravo!

    Rahul

    It looks like I can choose only 4000 characters using the SELECT statement (please, correct me if I'm wrong)

    You use the right method.

    There is an implicit conversion from XMLType to the data type VARCHAR2 as expected by the function TO_CLOB, where the limitation, and the error.

    To serialize XMLType to CLOB, use the XMLSerialize function:

    SELECT XMLSerialize (DOCUMENT

    XMLELEMENT ("accounts",

    ...

    )

    )

    OF ANY_TABLE;

    For the rest of the requirement, I wish you good luck trying to spool the XML correctly.

    You may need to play around with the SET LONG and SET LONGCHUNKSIZE commands to operate.

  • StageVideo use of Flex Application?

    Hi all!

    New class StageVideo I try and if I add this pure AS3 project everything works perfectly.

    But if I try to use the same code to the Flex project I get no video output, but looks like play video itself ('cos I can hear the soundtrack).

    I tried to delete all file mxml to make sure nothing covers video, attempted to remove all of the substantive changes and etc. (put here all other stuff that could overlap Stadium), but nothing helped.

    Is it possible to use StageVideo to Flex app at all? Maybe there is a trick to it?

    Can anyone help? Thanks in advance!

    Try an application with just a contentGroup appearance as in:

    <>

    "xmlns:FX ="http://ns.adobe.com/mxml/2009"

    xmlns:s = "library://ns.adobe.com/flex/spark".

    >

    [HostComponent ("spark.components.Application")]

    y = "0" >

  • Want to combine two tables with different numbers of lines 2d

    I'm out data in a file in 2d tables, then adding more as it goes, and I run into issues when the size changes.

    2D arrays must be of rectangular shape, so those empty space you have it will be filled with the default value of any data type you are using. See attachment for the concatenation of tables:

  • Creating a table using a stored procedure, error

    MY querry is as follows:

    create or replace
    PROCEDURE New_Account_Activations)
    MYDATE_DD OUT VARCHAR2,
    MYDATE_MM OUT VARCHAR2,
    MYDATE_YYYY OUT VARCHAR2,
    MYDATE OUT VARCHAR2,
    VAR1 OUT VARCHAR2,
    VAR2 OUT VARCHAR2,
    VAR3 OUT VARCHAR2,
    TABLE_NAME OUT VARCHAR2) IS

    BEGIN
    SELECT TO_CHAR (SYSDATE-2, 'YYYY') INTO MYDATE_YYYY FROM DUAL;
    SELECT TO_CHAR (SYSDATE-2, "MM") INTO MYDATE_MM FROM DUAL;
    SELECT TO_CHAR (SYSDATE-2, 'DD') INTO MYDATE_DD FROM DUAL;
    MYDATE: = MYDATE_YYYY | MYDATE_MM | MYDATE_DD | '000000.000Z';
    -TABLE_NAME: = "NEWACCOUNTACTI_TEST";
    VAR1: = 'B ';.
    VAR2: = 'A ';
    VAR3: = 'Y ';
    Table_name: = "NewAccountActi" | '_' || MYDATE_YYYY | '_'|| MYDATE_MM | '_'|| MYDATE_DD;
    run immediately "CREATE TABLE tbl_name AS SELECT * FROM NEWACCOUNTACTI_TEST WHERE 1 = 0';"

    END;

    ERRORS

    ORA-01031: insufficient privileges

    ORA-06512: at "JACK. NEW_ACCOUNT_ACTIVATIONS', line 21

    ORA-06512: at the level of line 12

    Process is complete.

    WRONG FORUM!

    This forum is for Sql Developer issues only. Please mark the thread ANSWERED and repost it in SQL and PL/SQL forum.

    https://forums.Oracle.com/community/Developer/English/oracle_database/sql_and_pl_sql

    As says the Exception, your user JACK does NOT CREATE TABLE privileges granted DIRECTLY to them (not through a role) on the NEWACCOUNTACTI_TEST table. Grant privileges directly to the user.

    If that does not meet your question repost your question in the forum; do NOT here.

  • Display data from two tables based on date criteria

    Hi all

    I have two tables, using these two tables and a few conditions I want to recover under result. Oracle version is (Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit Production)
    LOGON_ID        USER_ID       LOGON_TIME                 LOGON_TYPE    SUBSCRIBER_NO               CUSTOMER_ID

26063548     4528890298   4/5/2010 12:03:58 AM            MSISDN       GSM04528890298              581751708
    logon_histories_r table records the information of each user who connects to the system. Subscriber Details table contains all the information corresponding to subscriber_no, only 1 row should be returned.
    I'm confused usage date condition for the table of the Subscriber, the input parameter date 04/04/2006 to 15/04/06

    Select lh.logon_id, lh.user_id, lh.logon_time, lh.logon_type, subs.subscriber_no, subs.customer_id
    of logon_histories_r lh, subscribed subs
    where lh.logon_time > = to_date('05-04-2010','dd-mm-yyyy')--to_date('04-04-2006','dd-mm-yyyy')
    and lh.logon_time < to_date('06-04-2010','dd-mm-yyyy')--to_date('15-01-2007','dd-mm-yyyy')
    and lh.user_id = substr (subs.subscriber_no,-10);

    If the date range is 04/05/2010 to 04/06/2010 then the data related to the BAN 581751708 must be the result,
    If the date range is 04/04/2006 to 15/01/2007 data related to the BAN 502499502 must be the result.

    Please find DDL and data relevant to these results. There are millions of records of Subscriber & logon_histories_r table, I am given appropriate providing a subscriber_id.

    CREATE TABLE LOGON_HISTORIES_R
(
  LOGON_ID       NUMBER(12)                     NOT NULL,
  USER_ID        VARCHAR2(15 BYTE)              NOT NULL,
  LOGON_TIME     DATE                           NOT NULL,
  LOGOUT_TIME    DATE,
  LOGOUT_METHOD  VARCHAR2(15 BYTE),
  LOGON_TYPE     VARCHAR2(15 BYTE)              DEFAULT 'MSISDN'
);

CREATE TABLE SUBSCRIBER
(
  SUBSCRIBER_NO           VARCHAR2(20 BYTE)     NOT NULL,
  CUSTOMER_ID             NUMBER(9)             NOT NULL,
  SYS_CREATION_DATE       DATE                  NOT NULL,
  SYS_UPDATE_DATE         DATE,
  OPERATOR_ID             NUMBER(9),
  APPLICATION_ID          CHAR(6 BYTE),
  DL_SERVICE_CODE         CHAR(5 BYTE)          NOT NULL,
  DL_UPDATE_STAMP         NUMBER(4),
  EFFECTIVE_DATE          DATE                  NOT NULL,
  INIT_ACTIVATION_DATE    DATE                  NOT NULL,
  SUB_STATUS              CHAR(1 BYTE)          NOT NULL,
  SUB_STATUS_DATE         DATE                  NOT NULL,
  ORIGINAL_INIT_DATE      DATE                  NOT NULL,
  SUB_STATUS_LAST_ACT     CHAR(3 BYTE),
  SUB_STATUS_RSN_CODE     CHAR(4 BYTE),
  PRODUCT_TYPE            CHAR(3 BYTE),
  CUSTOMER_BAN            NUMBER(9),
  CTN_SEQ_NO              NUMBER(9),
  REQ_ST_GRACE_PERIOD     DATE,
  REQ_END_GRACE_PERIOD    DATE,
  COMMIT_START_DATE       DATE,
  COMMIT_END_DATE         DATE,
  COMMIT_REASON_CODE      CHAR(3 BYTE),
  COMMIT_ORIG_NO_MONTH    NUMBER(3),
  SUSP_RC_RATE_TYPE       CHAR(1 BYTE),
  CONTRACT_NO             VARCHAR2(10 BYTE),
  CNT_SEQ_NO              NUMBER(9),
  DEALER_CODE             CHAR(5 BYTE),
  ORG_DEALER_CODE         CHAR(5 BYTE),
  SALES_AGENT             CHAR(5 BYTE),
  ORG_SALES_AGENT         CHAR(5 BYTE),
  REQ_DEPOSIT_AMT         NUMBER(13,2),
  LEADING_NUMBER          VARCHAR2(20 BYTE),
  PABX_IND                CHAR(1 BYTE),
  NEXT_CTN                VARCHAR2(20 BYTE),
  NEXT_CTN_CHG_DATE       DATE,
  PRV_CTN                 VARCHAR2(20 BYTE),
  PRV_CTN_CHG_DATE        DATE,
  NEXT_BAN                NUMBER(9),
  NEXT_BAN_MOVE_DATE      DATE,
  PRV_BAN                 NUMBER(9),
  PRV_BAN_MOVE_DATE       DATE,
  SUB_STS_ISSUE_DATE      DATE,
  ACTIVATE_WAIVE_RSN      CHAR(6 BYTE),
  EARLIEST_ACTV_DATE      DATE,
  SUB_ACTV_LOCATION       CHAR(4 BYTE),
  CUST_WATCH_LMT          NUMBER(11,2),
  CUST_WATCH_DATE         DATE,
  BASIC_WATCH_LMT         NUMBER(11,2),
  CREDIT_WATCH_PIN_CD     NUMBER(4),
  SUB_MARKET_CODE         CHAR(3 BYTE)          NOT NULL,
  LIMIT_RESERVED_DAYS     NUMBER(4),
  FF_EXPIRATION_DATE      DATE,
  FLEX_IND                CHAR(1 BYTE),
  DUO_IND                 CHAR(1 BYTE),
  LISTED_IND              CHAR(1 BYTE),
  SUB_DEPARTMENT_CD       CHAR(4 BYTE),
  LAST_SUBS_DISC_DT       DATE,
  LAST_SUBS_DISC_DT_UD    DATE,
  LAST_SUBSCR_DISC_SN     NUMBER(3),
  LAST_SUBSCR_DISC_SN_UD  NUMBER(3),
  PNI                     VARCHAR2(10 BYTE),
  RMS_REF_STORE_ID        CHAR(4 BYTE),
  RMS_REF_TYPE            CHAR(1 BYTE),
  RMS_REF_OD              NUMBER(9),
  DLR_ACT_FEE             NUMBER(11,2),
  PREP_AMOUNT             NUMBER(11,2),
  SUBSCRIBER_ID           NUMBER(9)             NOT NULL,
  SUB_LANG                CHAR(2 BYTE),
  SMS_RCV_STYLE_CODE      CHAR(2 BYTE),
  CONV_RUN_NO             NUMBER(3),
  ALLOW_ADVERTISING_IND   CHAR(1 BYTE),
  IVR_WRONG_ACCESS_NO     NUMBER(2),
  THRESHOLD_AMT           NUMBER(11,2),
  PUBLISH_LEVEL           CHAR(30 BYTE),
  AUTO_RELEASE_IND        CHAR(1 BYTE),
  CUST_WATCH_EFF_DATE     DATE,
  CUST_WATCH_EXP_DATE     DATE,
  OPERATOR_CW_LMT         NUMBER(11,2),
  SEND_SMS_FOR_MATCH      CHAR(1 BYTE),
  CPS_STATUS              CHAR(1 BYTE),
  CPS_TRANSACTION         NUMBER(3),
  CPS_TYPE                NUMBER(3),
  ISP_PASS                VARCHAR2(30 BYTE),
  ISP_TYPE                CHAR(2 BYTE),
  OPERATOR_TMP_DATE       DATE,
  OPERATOR_TMP_LMT        NUMBER(11,2),
  SUB_ORG_CD              CHAR(10 BYTE),
  ORG_MEMBER_NO           VARCHAR2(20 BYTE)
);

Insert into LOGON_HISTORIES_R
   (LOGON_ID, USER_ID, LOGON_TIME, LOGOUT_TIME, LOGOUT_METHOD, LOGON_TYPE)
 Values
   (26063548, '4528890298', TO_DATE('04/05/2010 00:03:58', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('04/05/2010 00:06:58', 'MM/DD/YYYY HH24:MI:SS'),  NULL, 
    'MSISDN');

Insert into logon_histories_r
   (LOGON_ID, USER_ID, LOGON_TIME, LOGOUT_TIME, LOGOUT_METHOD, LOGON_TYPE)
 Values
   (2649592, '4528890298', TO_DATE('04/10/2006 19:19:20', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('04/10/2006 19:19:48', 'MM/DD/YYYY HH24:MI:SS'), 'TIMEOUT', 
    'MSISDN');



Insert into SUBSCRIBER
   (SUBSCRIBER_NO, CUSTOMER_ID, SYS_CREATION_DATE, SYS_UPDATE_DATE, OPERATOR_ID, APPLICATION_ID, DL_SERVICE_CODE, DL_UPDATE_STAMP, EFFECTIVE_DATE, INIT_ACTIVATION_DATE, SUB_STATUS, SUB_STATUS_DATE, ORIGINAL_INIT_DATE, SUB_STATUS_LAST_ACT, SUB_STATUS_RSN_CODE, PRODUCT_TYPE, CUSTOMER_BAN, CTN_SEQ_NO, REQ_ST_GRACE_PERIOD, REQ_END_GRACE_PERIOD, COMMIT_START_DATE, COMMIT_END_DATE, COMMIT_REASON_CODE, COMMIT_ORIG_NO_MONTH, SUSP_RC_RATE_TYPE, CONTRACT_NO, CNT_SEQ_NO, DEALER_CODE, ORG_DEALER_CODE, SALES_AGENT, ORG_SALES_AGENT, REQ_DEPOSIT_AMT, LEADING_NUMBER, PABX_IND, NEXT_CTN, NEXT_CTN_CHG_DATE, PRV_CTN, PRV_CTN_CHG_DATE, NEXT_BAN, NEXT_BAN_MOVE_DATE, PRV_BAN, PRV_BAN_MOVE_DATE, SUB_STS_ISSUE_DATE, ACTIVATE_WAIVE_RSN, EARLIEST_ACTV_DATE, SUB_ACTV_LOCATION, CUST_WATCH_LMT, CUST_WATCH_DATE, BASIC_WATCH_LMT, CREDIT_WATCH_PIN_CD, SUB_MARKET_CODE, LIMIT_RESERVED_DAYS, FF_EXPIRATION_DATE, FLEX_IND, DUO_IND, LISTED_IND, SUB_DEPARTMENT_CD, LAST_SUBS_DISC_DT, LAST_SUBS_DISC_DT_UD, LAST_SUBSCR_DISC_SN, LAST_SUBSCR_DISC_SN_UD, PNI, RMS_REF_STORE_ID, RMS_REF_TYPE, RMS_REF_OD, DLR_ACT_FEE, PREP_AMOUNT, SUBSCRIBER_ID, SUB_LANG, SMS_RCV_STYLE_CODE, CONV_RUN_NO, ALLOW_ADVERTISING_IND, IVR_WRONG_ACCESS_NO, THRESHOLD_AMT, PUBLISH_LEVEL, AUTO_RELEASE_IND, CUST_WATCH_EFF_DATE, CUST_WATCH_EXP_DATE, OPERATOR_CW_LMT, SEND_SMS_FOR_MATCH, CPS_STATUS, CPS_TRANSACTION, CPS_TYPE, ISP_PASS, ISP_TYPE, OPERATOR_TMP_DATE, OPERATOR_TMP_LMT, SUB_ORG_CD, ORG_MEMBER_NO)
 Values
   ('GSM04528890298', 110069191, TO_DATE('12/04/2001 17:06:17', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('01/01/2004 22:42:49', 'MM/DD/YYYY HH24:MI:SS'), NULL, 
    'FUTRX ', 'CS016', NULL, TO_DATE('01/02/2004 00:08:32', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('07/31/2000 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 
    'C', TO_DATE('01/02/2004 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('07/31/2000 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'CAN', 'CNP3', 
    'GSM', 110069191, 7013986, NULL, NULL, 
    TO_DATE('07/31/2000 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('01/31/2001 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'PPD', 6, NULL, 
    NULL, 1008631, 'DCNV ', 'DCNV ', 'DFLT ', 
    'DFLT ', 0, NULL, 'S', NULL, 
    NULL, NULL, NULL, NULL, NULL, 
    NULL, NULL, TO_DATE('01/02/2004 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), NULL, TO_DATE('07/31/2000 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 
    'TEMO', 0, NULL, 0, NULL, 
    'TEL', NULL, NULL, 'N', 'N', 
    'Y', NULL, NULL, NULL, NULL, 
    NULL, NULL, NULL, NULL, NULL, 
    0, 0, 8635, 'DK', '01', 
    1, 'N', NULL, 0, '1234', 
    NULL, NULL, NULL, NULL, NULL, 
    NULL, NULL, NULL, NULL, NULL, 
    NULL, NULL, NULL, NULL);
Insert into SUBSCRIBER
   (SUBSCRIBER_NO, CUSTOMER_ID, SYS_CREATION_DATE, SYS_UPDATE_DATE, OPERATOR_ID, APPLICATION_ID, DL_SERVICE_CODE, DL_UPDATE_STAMP, EFFECTIVE_DATE, INIT_ACTIVATION_DATE, SUB_STATUS, SUB_STATUS_DATE, ORIGINAL_INIT_DATE, SUB_STATUS_LAST_ACT, SUB_STATUS_RSN_CODE, PRODUCT_TYPE, CUSTOMER_BAN, CTN_SEQ_NO, REQ_ST_GRACE_PERIOD, REQ_END_GRACE_PERIOD, COMMIT_START_DATE, COMMIT_END_DATE, COMMIT_REASON_CODE, COMMIT_ORIG_NO_MONTH, SUSP_RC_RATE_TYPE, CONTRACT_NO, CNT_SEQ_NO, DEALER_CODE, ORG_DEALER_CODE, SALES_AGENT, ORG_SALES_AGENT, REQ_DEPOSIT_AMT, LEADING_NUMBER, PABX_IND, NEXT_CTN, NEXT_CTN_CHG_DATE, PRV_CTN, PRV_CTN_CHG_DATE, NEXT_BAN, NEXT_BAN_MOVE_DATE, PRV_BAN, PRV_BAN_MOVE_DATE, SUB_STS_ISSUE_DATE, ACTIVATE_WAIVE_RSN, EARLIEST_ACTV_DATE, SUB_ACTV_LOCATION, CUST_WATCH_LMT, CUST_WATCH_DATE, BASIC_WATCH_LMT, CREDIT_WATCH_PIN_CD, SUB_MARKET_CODE, LIMIT_RESERVED_DAYS, FF_EXPIRATION_DATE, FLEX_IND, DUO_IND, LISTED_IND, SUB_DEPARTMENT_CD, LAST_SUBS_DISC_DT, LAST_SUBS_DISC_DT_UD, LAST_SUBSCR_DISC_SN, LAST_SUBSCR_DISC_SN_UD, PNI, RMS_REF_STORE_ID, RMS_REF_TYPE, RMS_REF_OD, DLR_ACT_FEE, PREP_AMOUNT, SUBSCRIBER_ID, SUB_LANG, SMS_RCV_STYLE_CODE, CONV_RUN_NO, ALLOW_ADVERTISING_IND, IVR_WRONG_ACCESS_NO, THRESHOLD_AMT, PUBLISH_LEVEL, AUTO_RELEASE_IND, CUST_WATCH_EFF_DATE, CUST_WATCH_EXP_DATE, OPERATOR_CW_LMT, SEND_SMS_FOR_MATCH, CPS_STATUS, CPS_TRANSACTION, CPS_TYPE, ISP_PASS, ISP_TYPE, OPERATOR_TMP_DATE, OPERATOR_TMP_LMT, SUB_ORG_CD, ORG_MEMBER_NO)
 Values
   ('GSM04528890298', 502499502, TO_DATE('12/05/2006 15:55:13', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('01/12/2007 00:45:22', 'MM/DD/YYYY HH24:MI:SS'), NULL, 
    'FUTRX ', 'CS058', NULL, TO_DATE('01/12/2007 00:45:22', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/05/2006 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 
    'C', TO_DATE('01/12/2007 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/05/2006 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'CCN', 'NP  ', 
    'GSM', 502499502, 14419730, NULL, NULL, 
    TO_DATE('12/05/2006 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/04/2007 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'PPD', 6, NULL, 
    '1035393', 6976424, '2311 ', '2311 ', 'DFLT ', 
    'DFLT ', NULL, '045', 'S', 'GSM04525210338', 
    TO_DATE('01/12/2007 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), NULL, NULL, NULL, NULL, 
    NULL, NULL, TO_DATE('01/12/2007 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), NULL, TO_DATE('12/05/2006 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 
    'TEMO', NULL, NULL, NULL, NULL, 
    'TEL', NULL, NULL, 'N', 'N', 
    'Y', NULL, NULL, NULL, NULL, 
    NULL, NULL, NULL, NULL, NULL, 
    NULL, NULL, 6834900, 'DK', '01', 
    NULL, 'N', NULL, 9999999.99, '4321', 
    NULL, NULL, NULL, NULL, NULL, 
    NULL, NULL, NULL, NULL, NULL, 
    NULL, NULL, NULL, NULL);
Insert into SUBSCRIBER
   (SUBSCRIBER_NO, CUSTOMER_ID, SYS_CREATION_DATE, SYS_UPDATE_DATE, OPERATOR_ID, APPLICATION_ID, DL_SERVICE_CODE, DL_UPDATE_STAMP, EFFECTIVE_DATE, INIT_ACTIVATION_DATE, SUB_STATUS, SUB_STATUS_DATE, ORIGINAL_INIT_DATE, SUB_STATUS_LAST_ACT, SUB_STATUS_RSN_CODE, PRODUCT_TYPE, CUSTOMER_BAN, CTN_SEQ_NO, REQ_ST_GRACE_PERIOD, REQ_END_GRACE_PERIOD, COMMIT_START_DATE, COMMIT_END_DATE, COMMIT_REASON_CODE, COMMIT_ORIG_NO_MONTH, SUSP_RC_RATE_TYPE, CONTRACT_NO, CNT_SEQ_NO, DEALER_CODE, ORG_DEALER_CODE, SALES_AGENT, ORG_SALES_AGENT, REQ_DEPOSIT_AMT, LEADING_NUMBER, PABX_IND, NEXT_CTN, NEXT_CTN_CHG_DATE, PRV_CTN, PRV_CTN_CHG_DATE, NEXT_BAN, NEXT_BAN_MOVE_DATE, PRV_BAN, PRV_BAN_MOVE_DATE, SUB_STS_ISSUE_DATE, ACTIVATE_WAIVE_RSN, EARLIEST_ACTV_DATE, SUB_ACTV_LOCATION, CUST_WATCH_LMT, CUST_WATCH_DATE, BASIC_WATCH_LMT, CREDIT_WATCH_PIN_CD, SUB_MARKET_CODE, LIMIT_RESERVED_DAYS, FF_EXPIRATION_DATE, FLEX_IND, DUO_IND, LISTED_IND, SUB_DEPARTMENT_CD, LAST_SUBS_DISC_DT, LAST_SUBS_DISC_DT_UD, LAST_SUBSCR_DISC_SN, LAST_SUBSCR_DISC_SN_UD, PNI, RMS_REF_STORE_ID, RMS_REF_TYPE, RMS_REF_OD, DLR_ACT_FEE, PREP_AMOUNT, SUBSCRIBER_ID, SUB_LANG, SMS_RCV_STYLE_CODE, CONV_RUN_NO, ALLOW_ADVERTISING_IND, IVR_WRONG_ACCESS_NO, THRESHOLD_AMT, PUBLISH_LEVEL, AUTO_RELEASE_IND, CUST_WATCH_EFF_DATE, CUST_WATCH_EXP_DATE, OPERATOR_CW_LMT, SEND_SMS_FOR_MATCH, CPS_STATUS, CPS_TRANSACTION, CPS_TYPE, ISP_PASS, ISP_TYPE, OPERATOR_TMP_DATE, OPERATOR_TMP_LMT, SUB_ORG_CD, ORG_MEMBER_NO)
 Values
   ('GSM04528890298', 581751708, TO_DATE('03/31/2010 19:10:33', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('04/01/2010 16:17:40', 'MM/DD/YYYY HH24:MI:SS'), 10077, 
    NULL, 'CS009', NULL, TO_DATE('03/31/2010 19:10:33', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('03/31/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 
    'A', TO_DATE('03/31/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('03/31/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'NAC', 'CA  ', 
    'GSM', 581751708, 24798333, NULL, NULL, 
    TO_DATE('03/31/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('09/29/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), NULL, 6, NULL, 
    NULL, 12093584, '2357 ', '2357 ', 'DFLT ', 
    'DFLT ', NULL, '045', 'S', NULL, 
    NULL, NULL, NULL, NULL, NULL, 
    NULL, NULL, TO_DATE('03/31/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), NULL, TO_DATE('03/31/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 
    'TEMO', NULL, NULL, NULL, NULL, 
    'TEL', NULL, TO_DATE('12/31/4700 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'N', 'N', 
    'Y', NULL, NULL, NULL, NULL, 
    NULL, NULL, NULL, NULL, NULL, 
    NULL, NULL, 9474437, 'DK', '01', 
    NULL, 'N', NULL, 999999999.99, '12', 
    NULL, NULL, NULL, NULL, NULL, 
    NULL, NULL, NULL, NULL, NULL, 
    NULL, NULL, NULL, NULL);
Insert into SUBSCRIBER
   (SUBSCRIBER_NO, CUSTOMER_ID, SYS_CREATION_DATE, SYS_UPDATE_DATE, OPERATOR_ID, APPLICATION_ID, DL_SERVICE_CODE, DL_UPDATE_STAMP, EFFECTIVE_DATE, INIT_ACTIVATION_DATE, SUB_STATUS, SUB_STATUS_DATE, ORIGINAL_INIT_DATE, SUB_STATUS_LAST_ACT, SUB_STATUS_RSN_CODE, PRODUCT_TYPE, CUSTOMER_BAN, CTN_SEQ_NO, REQ_ST_GRACE_PERIOD, REQ_END_GRACE_PERIOD, COMMIT_START_DATE, COMMIT_END_DATE, COMMIT_REASON_CODE, COMMIT_ORIG_NO_MONTH, SUSP_RC_RATE_TYPE, CONTRACT_NO, CNT_SEQ_NO, DEALER_CODE, ORG_DEALER_CODE, SALES_AGENT, ORG_SALES_AGENT, REQ_DEPOSIT_AMT, LEADING_NUMBER, PABX_IND, NEXT_CTN, NEXT_CTN_CHG_DATE, PRV_CTN, PRV_CTN_CHG_DATE, NEXT_BAN, NEXT_BAN_MOVE_DATE, PRV_BAN, PRV_BAN_MOVE_DATE, SUB_STS_ISSUE_DATE, ACTIVATE_WAIVE_RSN, EARLIEST_ACTV_DATE, SUB_ACTV_LOCATION, CUST_WATCH_LMT, CUST_WATCH_DATE, BASIC_WATCH_LMT, CREDIT_WATCH_PIN_CD, SUB_MARKET_CODE, LIMIT_RESERVED_DAYS, FF_EXPIRATION_DATE, FLEX_IND, DUO_IND, LISTED_IND, SUB_DEPARTMENT_CD, LAST_SUBS_DISC_DT, LAST_SUBS_DISC_DT_UD, LAST_SUBSCR_DISC_SN, LAST_SUBSCR_DISC_SN_UD, PNI, RMS_REF_STORE_ID, RMS_REF_TYPE, RMS_REF_OD, DLR_ACT_FEE, PREP_AMOUNT, SUBSCRIBER_ID, SUB_LANG, SMS_RCV_STYLE_CODE, CONV_RUN_NO, ALLOW_ADVERTISING_IND, IVR_WRONG_ACCESS_NO, THRESHOLD_AMT, PUBLISH_LEVEL, AUTO_RELEASE_IND, CUST_WATCH_EFF_DATE, CUST_WATCH_EXP_DATE, OPERATOR_CW_LMT, SEND_SMS_FOR_MATCH, CPS_STATUS, CPS_TRANSACTION, CPS_TYPE, ISP_PASS, ISP_TYPE, OPERATOR_TMP_DATE, OPERATOR_TMP_LMT, SUB_ORG_CD, ORG_MEMBER_NO)
 Values
   ('GSM04528890298', 816370100, TO_DATE('09/03/2005 10:12:13', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('03/14/2006 12:20:09', 'MM/DD/YYYY HH24:MI:SS'), 14462, 
    NULL, 'CS016', NULL, TO_DATE('03/14/2006 12:20:08', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('09/03/2005 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 
    'C', TO_DATE('03/14/2006 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('09/03/2005 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'CAN', 'CNP3', 
    'GSM', 816370100, 12575966, NULL, NULL, 
    TO_DATE('09/03/2005 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('03/02/2006 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'PPD', 6, NULL, 
    '690925', 3436964, '4243 ', '4243 ', 'DFLT ', 
    'DFLT ', NULL, '045', 'S', NULL, 
    NULL, NULL, NULL, NULL, NULL, 
    NULL, NULL, TO_DATE('03/14/2006 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), NULL, TO_DATE('09/03/2005 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 
    'TEMO', NULL, NULL, NULL, NULL, 
    'TEL', NULL, NULL, 'N', 'N', 
    'Y', NULL, NULL, NULL, NULL, 
    NULL, NULL, NULL, NULL, NULL, 
    NULL, NULL, 1436383, 'DK', '01', 
    NULL, 'N', NULL, 9999999.99, '0', 
    NULL, NULL, NULL, NULL, NULL, 
    NULL, NULL, NULL, NULL, NULL, 
    NULL, NULL, NULL, NULL);

    Hello

    Welcome to the froum!

    Thanks for posting the CREATE TABLE and INSERT! It's very nigra.

    user12990691 wrote:
    ...
    logon_histories_r table records the information of each user who connects to the system. Subscriber Details table contains all the information corresponding to subscriber_no, only 1 row should be returned.

    Do you mean a line by the user, or a line every time that you run the report, regardless of the number of users connected during the period that interests us?
    Anyway, if there are multiple logons, how do you decide that one? Or the output of logon_histories_r columns will be a sort of composite?

    I'm confused usage date condition for the table of the Subscriber, the input parameter date 04/04/2006 to 15/04/06

    Select lh.logon_id, lh.user_id, lh.logon_time, lh.logon_type, subs.subscriber_no, subs.customer_id
    of logon_histories_r lh, subscribed subs
    where lh.logon_time > = to_date('05-04-2010','dd-mm-yyyy')--to_date('04-04-2006','dd-mm-yyyy')
    and lh.logon_time< to_date('06-04-2010','dd-mm-yyyy')="" --="">
    and lh.user_id = substr (subs.subscriber_no,-10);

    Must LH.LOGON_TIME match something in the subscruber table? If so, you need to addsome extra join pathological.
    For example, if lh.logon_time must be between d1 and d2 (where d1 and d2 are DATE columns), then:

    select      lh.logon_id
,     lh.user_id
,     lh.logon_time
,     lh.logon_type
,     subs.subscriber_no
,     subs.customer_id
from      logon_histories_r      lh
,      subscriber           subs
where      lh.logon_time      >= to_date ('05-04-2010','dd-mm-yyyy') -- to_date('04-04-2006','dd-mm-yyyy')
and      lh.logon_time      <  to_date ('06-04-2010','dd-mm-yyyy') -- to_date('15-01-2007','dd-mm-yyyy')
and      lh.user_id      = substr (subs.subscriber_no, -10)
and     lh.logon_time     >= subs.d1     -- New condition added
and     lh.logon_time     <= subs.d2     -- New condition added
;

    Please find DDL and data relevant to these results. There are millions of records of Subscriber & logon_histories_r table, I am given appropriate providing a subscriber_id.

    That's smart, don't not post each row of the table: looks like you posted just enough to show what the problem is.
    Try to do the same thing with the columns. Do not post every single column, just the columns that have something to do with the problem.

  • Error using the ColdFusion/Flex Application Wizard

    I'm looking forward to use the CRUD from the CF/Flex Application Wizard features. After 4 hours of trying to find the problem, however, maybe someone else can help. The wizard is able to locate and work with a SQL Server 2005 data source and create the application. When I run it however, I have the following error:

    (mx.rpc::Fault) #0
    errorID = 0
    faultCode = "Client.Error.MessageSend".
    faultDetail = "error Channel.Connect.Failed NetConnection.Call.Failed: HTTP: status 405.
    faultString = "send failed".
    message = "faultCode: Client.Error.MessageSend".
    faultString = "send failed".
    faultDetail = "error Channel.Connect.Failed NetConnection.Call.Failed: HTTP: status 405.
    name = "Error".
    rootCause = (Object) #1
    Code = "NetConnection.Call.Failed".
    Description = "HTTP: status 405.
    Details = "" http://localhost/flex2gateway " "
    Level = "error".

    1 flex Integration is enabled on my 7.0.2 Server
    2. it looks like a mapping problem

    Someone, help please?
    Christian Briggs

    It was after all the configuration file. Thanks for your help.

    The problem: was always set to false. Thank you!

  • the use of tables of two schemas in the same application

    I have the table 1 of scheme A and table 2 of Figure B. In my worksapce I has the permissions to access the two schemas. In aplication wizzard, I have a listbox put what schema I work with and I can onli 1 patterns. but I want to work with the two tables in my applications, how can I do.

    Notice: I have recently started using APEX. In my work I use Oracle Forms, and now I'm trying to use APEX.

    -Select the schema of analysis in the application.
    -Grant insert, update, select and delete on a table the other schemas to the schema of the analysis.
    -Create a private synonym (create a synonym for other_schema.other_table other_table) in the scheme of the analysis.
    -Work with the two tables in the schema of analysis as if they resided in this scheme.

    Dave

Maybe you are looking for

  • What terminal uses El Capitan is bash?

    Hello everyone. I know that Mac OS is UNIX-based. I also used Linux and I found that the terminal in El Capitan is Kind ' a bash? Am I wrong? Can someone tell me what are the differences between a bash on Linux and here?I did not had the time to expl

  • What is a dns server?

    Hello, like all other issues I could not my search on the web on MSN to respond. He said he was do not connect the DNS. I had the web page to the top, but he did this the last time. I have a modem router (no comcast, cavalier) and I was wondering if

  • Firewall / internet connection (ICS) service sharing

    in recent days, I am not able to connect to the internet. When I try to open the firewall I get the following message. Windows cannot start the windows firewall / ICS service (ICS) Internt. Need help to solve this problem

  • Life of Windows 7

    Dear all, Windows 7 has been the operating system that is perfect for me. I bought a full installation disc and installed the system on my newly built several years ago. I improved my laptop Win 10, hated the system and converted to win 7. The laptop

  • The European Union basic installation

    I was just instlaling EU based on my unifying in a Foglight 5.6.5 envionment and I get this error. "Could not complete the requested operation with the following messages: Type ' foglight - 5:FxMSystemHealthResult:1' doesn't have a property with the