Combining the two (or more) of a calendar

Similar Questions

• I try to combine a picture of my sister with a picture of a poem next to her. How to combine the two into a single photo?

  Paint or Windows Photo Gallery

  I try to combine a picture of my sister with a picture of a poem beside it, how to combine the two into a single photo?

  If you have the poem recorded in an image format,
  the following freeware can create a side by side
  Panorama.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download IrfanView
  http://MajorGeeks.com/IrfanView_d4253.html
  (filename: iview433_setup.exe)
  (uncheck if you don't want Google Chrome)

  Download plug-ins too...

  IrfanView plugins
  http://MajorGeeks.com/IrfanView_PlugIns_d4908.html
  (filename: irfanview_plugins_433_setup.exe)

  When the program is installed... read more...

  Open IrfanView and go... Image / create the Image of the Panorama...
  (this will open the screen to "Create a panorama image")

  On the screen to "Create a panorama image"... left click on the add images"" button.
  (Displays the 'Open' screen. Now, drill down to the
  the folder that contains your saved Photos of veterinarians.

  Now... click left (highlighted), the two images, you want to join.
  (you can select more than one if you hold down your Ctrl key)
   
  The two images highlight... left click on the button 'open '.
  (Or... you can add the images one at a time... which is always easier)

  Now, go back to the screen "Create the panorama image.
  and the file names of the selected pictures need to be in the
  Field "Input Images.

  Now with the names of two files in 'Images of entry' field...
  You can left click on the button 'create Image '.

  (the positions left and right of these images can be swapped in)
  selection of a file name and using the "mount image" / "Move."
  Images down"buttons...)

  Now you should see a display of the combined image.
  Reach... File / save as...

  Choose a backup location / enter a file name / choose a format...
  On the left, click on the button "Save..."

• Combine the two columns of text

  I have two columns of text (say that name is a column and the name is the other)

  I would like to combine the two columns for the text of these two columns are in a column. (First name and last name in the same column)

  Is this possible? If so is there a tutorial somewhere?

  Hi Danielle,

  The & (concatenation operator) is your friend.

  

  Formula in D2 (fill down)

  "B2 &" "& C2.

  & joins elements into a single string.

  "" inserts a space.

  Kind regards

  Ian.

• Need to combine the two VLOOKUP formulas and SO, tried several variations... not getting what I need.

  Hi, thanks for the review, any help is appreciated.

  The problem.

  I am creating a spreadsheet to download information to a database.

  The database is very picky and all the blank cells cannot contain a zero but should be empty because some cells contain the URL of the image.

  A '0' instead of a string with a .jpg extension will throw an error.

  In general, I use an 'IF' statement to achieve this:

  = IF (A1 = "", "", A1)

  It works like a charm. However, I changed the map and now the cells have a 'VLOOPUP' function to draw the other worksheet data.

  If the target cell has no data the host cell will express a '0 '. This will raise errors on the upload.

  I tried to embed the two formulas without success. Is it possible to combine the two forms, or is there another solution to draw the other worksheet data and if the receiving cell has no data to express an empty cell / VIRGIN instead of a '0 '.

  If you need an example let me know.

  I hope it's clear.

  I suspect this is related to MS Office Excel.  If I'm not mistaken, please repost this in the MS Office category for the version that you are using the category at the top of the page tab

• combines the two text fields

  Hello, I've created a form with Adobe pro XI. I want to create a text field that combines the two fields (Field1 and Field2) text. How can I do?

  If the third field does not need to be editable, you can use a calculation script customized to what is something like the following:

  Custom calculation script

  (function () {}

  Get the field values as strings

  var s1 = getField("Text1").valueAsString;

  var S2 = getField("Text2").valueAsString;

  Set the value of this field to the concatenation of two strings

  Event.Value = s1 + s2;

  })();

• I have two script. one for indesign and another for photoshop. How can I combine the two scripts?

  
  Hi all

  I have a script for indd that convert a table selected user in JPG format (1276 px width, height varies). Second script photoshop asking to select jpg file and then check if the height in pixels is less than 1018 pixel, can he expand canvas size (height) to 1018 px.

  How can I combine the two script, tip, or how to start would be useful? The workflow must be:

  • the user select table in the indd document
  • export table in jpg format
  • script you will be asked to select the file table jpg or if it is possible to automate this would be awesome.
  • enlarge the height of the canvas to 1018 px

  Thank you

  Marie rosine

  PS: I have already read the Java script tool guide pdf but unable to understand

  Yes and the documentation is pretty self-explanatory.

  However, here is an excerpt:

  function callPhotoshop(file) {
     var bt = new BridgeTalk;
  
     bt.target = "photoshop";
  
     bt.body = "function main (){ return confirm('Am I in Photoshop?'); }; main();";
  
    bt.onResult = function(resObj)
    {
    var myResult = resObj.body;
    alert( myResult? "PS code was correctly executed" : "Something wrong happened" );
    }
  
     bt.send();
  }
  
  callPhotoshop();
  

  HTH,

  Loïc

  http://www.ozalto.com

• How to combine the two fonts in a logo type?

  I've created a customer logo ID, consisting of two fonts. The name of the customer is Trajan Pro. The logo must also include a "Registered" symbol (the circled R) after the name. Unfortunately, using Trajan Pro mode Exhibitor does not look good, especially scaling down and with a circle around the R. To work around this problem, I used the Arial font to create the® in a supplemental box, be able to fine tune its size and position. It's great for once, but I would like to be able to combine the two so that the name of the customer in Trajan Pro and the symbol "Recorded" in Arial can be re-scaling or repositionnes in unison and saved for future use. What is the best way to do it?  Here is an article of the logo to demonstrate what I have:

  Select the two text blocks and go to Type > vectorize. Group them. Now that you have drawn, no text. It is usually a good idea to save a logo in a separate file, which can be placed. Put the logo in its own file on one page of appropriate size. Save the file and export a PDF of print quality. Link to the PDF file when using the logo in other files.

• Want to combine the two queries

  Hello

  It is my first post here, I hope it's a good place to put it.

  I have two queries that both gave me the results. I guess that both are way more elegant or better to do what they do, but that's what I came with. So feel free to modify them. However, my real problem is I want to combine these two queries in a single query, removing duplicate information.

  analytical_query

  SELECT * from(
    select
    requisitions.acc_id AS "Accession #"
    ,requisitions.draw_date AS "Draw Date"
    ,requisitions.received_date AS "Received Date"
    ,req_panels.run_date AS "Run Date"
    ,tests.TEST_ID
    ,(CASE WHEN tests.TEST_ID IN (7101) THEN results.RESULT_NUMERIC*2
           ELSE results.RESULT_NUMERIC
     END) AS RESULT_NUMERIC
    ,doctors.f_name || ' '|| doctors.l_name AS "Physician"
    ,organizations.state AS "State"
  FROM requisitions
  
  inner join req_panels ON requisitions.acc_id = req_panels.acc_id
  inner join results ON req_panels.rp_id = results.rp_id
  inner join tests ON results.test_id = tests.test_id
  inner join doctors ON requisitions.doc_id1 = doctors.doc_id
  inner join organizations ON requisitions.org_id = organizations.org_id
  
  WHERE requisitions.DEL_FLAG='F'
       AND req_panels.DEL_FLAG='F'
       AND results.DEL_FLAG='F'
       AND req_panels.PANEL_ID IN (7000,70001,70551)
       AND results.TEST_ID IN (7101,7102,7107,7108)
       AND requisitions.RECEIVED_DATE > TO_DATE('9/1/2013', 'MM/DD/YYYY')
  ORDER BY requisitions.ACC_ID
  )
  
  pivot(
        MAX(RESULT_NUMERIC)
        for TEST_ID IN ('7101' AS CRP,'7102' AS Hemoglobin,'7107' AS "LDT Run 1",'7108' AS "LDT RUN 2")
  )
  

  culture_query

  SELECT * from(
  select
    requisitions.acc_id AS "Accession #"
    ,MAX(requisitions.draw_date) AS "Draw Date"
    ,MAX(requisitions.received_date) AS "Received Date"
    ,MAX(req_panels.run_date) AS "Run Date"
    ,tests.TEST_ID
    ,LISTAGG(results.RESULT_ALPHA, ';')
    WITHIN GROUP
    (ORDER BY results.RESULT_ALPHA) RESULT_ALPHA
  FROM requisitions
  
  inner join req_panels ON requisitions.acc_id = req_panels.acc_id
  inner join results ON req_panels.rp_id = results.rp_id
  inner join tests ON results.test_id = tests.test_id
  inner join doctors ON requisitions.doc_id1 = doctors.doc_id
  inner join organizations ON requisitions.org_id = organizations.org_id
  
  WHERE req_panels.PANEL_ID IN (7000,70001,70551)
       AND results.TEST_ID IN (10010,10052,11010)
       AND requisitions.RECEIVED_DATE > TO_DATE('9/1/2013', 'MM/DD/YYYY')
       AND requisitions.DEL_FLAG = 'F'
       AND req_panels.DEL_FLAG = 'F'
       AND results.DEL_FLAG = 'F'
       AND req_panels.RUN_DATE is not null
  group by requisitions.ACC_ID, tests.TEST_ID
  )
  
  pivot(
        MAX(RESULT_ALPHA)
        for TEST_ID IN ('10010' AS "Organism",'10052' AS "Negative/No Growth", '11010' AS "Growth")
  )
  

  Basically, what is missing from the first query is the global list of the 'RESULT_ALPHA' for 'TEST_ID"10010, 10052 and 11010 numbers. And because of the way they want to view this information that I had to tilt it, which is where I ran into problems. If anyone has any idea on how I can combine these two requests and make them more effective that would be great.

  Thank you.

  Hello

  JayG30 wrote:

  ... I have however found a way to do what I would call "swivel conditional."  ...

  I think it's the crux of this problem; you want MAX BOF a few tests and LISTAGG for others.  I don't know a good way to attract the SELECT... PIVOT to do both at the same time.  I think it's one of those situations where SOME... PIVOT is not the best tool for the job;  MAX (CASE...) and LISTAGG (CASE...) may be more practical and more effective:

  SELECT rq.acc_id

  , MAX (rq.draw_date) AS "the draw Date.

  , MAX (rq.received_date) as BEING "received Date".

  , MAX (rp.run_date) AS "Date of the race.

  , MAX (CASE WHEN rs.test_id = 7101 THEN rs.result_numeric * END 2) AS the crp

  , MAX (CASE WHEN rs.test_id = 7102 THEN rs.result_numeric END) AS hemoglobin

  , MAX (CASE WHEN rs.test_id = 7107 THEN rs.result_numeric END) AS "LDT Run 1.

  , MAX (CASE WHEN rs.test_id = 7108 THEN rs.result_numeric END) AS "LDT, 2nd round.

  , LISTAGG (CASE WHEN rs.test_id = 10010 THEN rs.result_alpha END)

  , ';'

  ) Within GROUP (ORDER BY rs.result_alpha) AS "organization".

  , LISTAGG (CASE WHEN rs.test_id = 11010 THEN rs.result_alpha END)

  , ';'

  ) Within GROUP (ORDER BY rs.result_alpha) AS a 'growth '.

  , LISTAGG (CASE WHEN rs.test_id = 10052 THEN rs.result_alpha END)

  , ';'

  ) Within GROUP (ORDER BY rs.result_alpha) AS 'Negative/No growth '.

  Rq requisitions

  INNER JOIN req_panels ON rp.acc_id = rq.acc_id PR

  INNER JOIN results rs ON rs.rp_id = rp.rp_id

  WHERE rq.del_flag = 'F'

  AND rp.del_flag = 'F'

  AND rs.del_flag = 'F'

  AND rp.run_date IS NOT NULL

  GROUP BY rq.acc_id

  ORDER BY rq.acc_id

  ;

  I don't quite get the results you have posted; for example, I don't see how you get a row of results with 'Accession' = 142425, while acc_id does not occur in the sample data.  It was maybe just a typo.

• Combine the two projects into one

  I know it is a very popular question and I read many answers excellent previous answers.  The two most popular procedures seem to be simple copy - paste and use clips of compounds with copy / paste.  CPF has improved this process over the years and I ask the question again to get the benefit of current thinking.   I have an iMac (mid-2011) OS X 10.11.4 and FCP worm 10.2.2.  I have two separate events within the same library.  There is a completed project, with all the transitions, effects and music, located within each discipline.    Current ideas on how to combine these two projects into one would be greatly appreciated.

  Thank you.

  Copy and paste is the only method I know.

  Open the project in the timeline first.

  Open the second project in the timeline panel. Only one project appears at the same time.

  Select an item in the timeline and press command + A to select all, then control + C to copy.

  Use the project navigation arrows to return the first project:

  

  Move the playhead to where copied clips must be glued and press command + V.

  Al

• Is it possible to combine the TWO Apple id

  I had an older apple ID that I made a purchase with and then I added new ID apple later and one of my purchases (subscription journal) does not open on my i pad in the apple ID

  I think that when I subscribed first I used my old apple ID and now I do not really use it, but the application has stopped working

  I think the subscription works if I can combine of the two apple ID

  Can someone help, please notify

  Doug

  Hi DougieFresh1963

  Apple ID are not cumulative and purchases cannot be transferred.

  You know your credentials of the former Apple ID?

• Flatten the two (or more) transparent PNG images (32-bit)

  Hello

  How to flatten two (or more) transparent PNG (32-bit) images.

  The result must also be a transparent PNG (32 bit).

  It is the solution that I was looking for.

  Thanks Darin.K.

• Combining the two networks

  I saw the task of combining two separate networks into a single, or at least in particular.  Currently, one of our branches off site are moving their servers to our location. A partial advantage is that both sites using ASA. Servers that are moving to internal will have their own domain controllers and subnet range. We use only our ASA.

  My first concern is that of the subnet. Currently, all on our ASA is configured for the 192.168.0.x with the subnet mask of 255.255.255.248. Their range is 192.168.100.x with the subnet mask of 255.255.255.0.  Can I make changes to our subnet mask ASA register their range?

  Second, the two sites use LDAP authentication. Will it create a separate policy to VPN in so that they can continue to use their LDAP? I guess that Yes.

  Are there any surprises or traps that I need to know? Thank you

  Lets start by setting the NAT.  Add:

  access-list inside-ls_nat0_outbound extended permit ip any 192.168.100.0 255.255.255.0nat (inside-ls) 0 access-list inside-ls_nat0_outbound

• combine the two queries analysis

  Hi friends,

  could you please help me to combine these two queries. The bottom one looks like, take too many resources.

  FUNCTION XML_error_log ()P_i_xml IN XMLTYPE, p_i_event_key IN VARCHAR2,( )

  RETURN VARCHAR2

  IS

  l_covered_product_header_id NUMBER ;

  l_item_path VARCHAR2 (500);

     xml_table                     XMLTYPE;

  p_ret_code_o VARCHAR2 (5);

  p_error_buff_o VARCHAR2 (2000);

     l_user_id                     NUMBER (15) := fnd_global . user_id ;

  l_implicit_product_name VARCHAR2 (40);

  l_top_model_line_id oe_order_lines_all . top_model_line_id % TYPE;

  main_error_check VARCHAR2 (100) := NULL;

  main_error_check1 VARCHAR2 (100) := NULL;

  l_status_log_status VARCHAR2 (1);

  l_err_msg_log_status VARCHAR2 (4000);

     p_o_status                    VARCHAR2 (100);

     p_o_err_msg                   VARCHAR2 (100);

  P_i_input_res_xml XMLTYPE;

  BEGIN

  p_o_status := 'S' ;

  p_o_err_msg := NULL;

  Dbms_output.put_line ()' Start... process_response_xml ');

  FOR i

  IN (SELECT x. code , x . gravity , x . Description                   

  DE XMLTABLE ( )

  xmlnamespaces (DEFAULT ' urn: xyz:ccw:config:common: data'()

  , ' for $i in //error

  Returns the element r {}

  $i / code,.

  $i / description.

  $i / gravity

  }'

  By the WAY P_i_input_res_xml

  COLUMNS

                code  VARCHAR2 (13) Path 'code'

  , gravity VARCHAR2 (30) Path "gravity"

  , Description VARCHAR2 (30) Path 'description'

  ) x )

  LOOP

  DBMS_OUTPUT.put_line ) ( )

  ' code : ' || i . code );

  DBMS_OUTPUT.put_line ) ( )

  ' severity: ' || i . gravity );

  DBMS_OUTPUT.put_line ) ( )

  ' description: ' || i . Description );

  main_error_check := i . code of : main_error_check;

  INSERT IN xxgco_config_validate ()event_status ERROR_CODE error_description ,error_severity creation_date event_key last_update_date( )

  VALUES('E',i. code , i . Description , i . gravity SYSDATE, p_i_event_key , SYSDATE);

  RETURN 'E' ;

  END LOOP;

  DBMS_OUTPUT.put_line ()' main_error_check:' : main_error_check);

  DBMS_OUTPUT.put_line ()' COMPLETED:');

  IF main_error_check IS NULL

  THEN

  FOR i

  IN (SELECT x. code , x . gravity , x . Description , x . subcause                   

  DE XMLTABLE ( )

  xmlnamespaces (DEFAULT ' urn: xyz:ccw:config:common: data'()

  , ' for $i in //message

  Returns the element r {}

  $i / code,.

  $i / description.

  $i / gravity,.

  $i / subCause

  }'

  By the WAY P_i_input_res_xml

  COLUMNS

                code  VARCHAR2 (13) Path 'code'

  , gravity VARCHAR2 (30) Path "gravity"

  , Description VARCHAR2 (30) Path 'description'

  , subCause VARCHAR2 (50) Path "subCause"

  ) x )

  LOOP

  DBMS_OUTPUT.put_line ) ( )

  "code:" || i . code );

  DBMS_OUTPUT.put_line ) ( )

  ' severity: ' || i . gravity );

  DBMS_OUTPUT.put_line ) ( )

  ' description: ' || i . Description );

  DBMS_OUTPUT.put_line()' subCause:': i. subCause );

  INSERT IN xxgco_config_validate ()event_status ERROR_CODE error_description ,error_severity error_cause creation_date event_key last_update_date( )

                      VALUES('E',i. code , i . Description , i . gravity , i . subcause SYSDATE, p_i_event_key , SYSDATE);

  main_error_check1 := i . code of : main_error_check1;

  END LOOP;

  IF main_error_check1 IS NOT NULL

  THEN

  RETURN ('E');

  ON THE OTHER

  RETURN ('S');

  END IF;

  ON THE OTHER

  -TODO Log main error Log

  RETURN ('E');

  END IF;

  EXCEPTION

  WHEN Others

  THEN

  p_o_err_msg :=

  SUBSTR (

  ' Error in the response_XML_error_log FUNCTION:'

              || SUBSTR (SQLERRM, 1, 250)

              || ':'

              || DBMS_UTILITY.format_error_backtrace ,

  1 ,

  4000 );

  RETURN 'E' ;

  END XML_error_log ;

  
  

  
  

  Thanks in advance
  

  Ok.. This isn't a constructive debate...

• question about how to combine the two scripts.

  
  Hello

  I have a sql script that can display a table (or view) all the information, it works fine. I call it validate_table.sql, as below:

  command prompt
  accept invites owner "Enter table owner:
  accept invites from TABLE_NAME "Enter object (table/View...) "name:"

  
  column owner format a10 column 'owner '.
  column format a30 topic 'Object name' object_name
  column object_type format a15 direction "Type of object".
  Status format a10 column titled "Status".
  in the heading of column created format a20 "created."
  the LAST_DDL_TIME format a20, heading 'LAST_DDL_TIME.
  Select
  owner
  object_name
  object_type
  status
  , to_char (created, "DD_MON_YY hh24:mi:ss") created
  LAST_DDL_TIME,
  Of
  DBA_OBJECTS
  where
  object_name = upper ('& table_name') and owner = upper ('& owner');

  
  command prompt

  prompt -- ----------------------------------------------------------------------- ---

  Guest - table/view structure-

  prompt -- ----------------------------------------------------------------------- ---

  command prompt

  
  describe and owner... & table table_name

  command prompt

  prompt -- ----------------------------------------------------------------------- ---

  guest - list assigned user/subsidies-

  prompt -- ----------------------------------------------------------------------- ---

  command prompt

  set pagesize 50000
  set linesize 10000
  set verify off
  Set feedback off
  column lvl format A4 direction "Lvl".
  proprietary format of columns A14
  format column in table_name A29
  A38 dealer column format
  column privilege A10 format

  
  SELECT 'Role' lvl, t.table_name, t.grantee, t.owner, t.privilege
  OF dba_tab_privs t
  WHERE t.grantee IN (SELECT FROM dba_roles role WHERE = role t.grantee) and t.table_name = upper ('& table_name') and t.owner = upper ('& owner')
  UNION
  SELECT 'User' lvl t.table_name, t.grantee, t.owner, t.privilege
  OF dba_tab_privs t
  WHERE t.grantee IN (SELECT username FROM dba_users WHERE username = t.grantee) and t.table_name = upper ('& table_name') and t.owner = upper ('& owner')
  UNION
  SELECT 'Pub' lvl, t.table_name, t.grantee, t.owner, t.privilege
  OF dba_tab_privs t
  WHERE t.grantee = 'PUBLIC' and t.table_name = upper ('& table_name') and t.owner = upper ('& owner')
  ORDER BY 1, 2, 3;

  command prompt

  prompt -- ----------------------------------------------------------------------- ---

  guest - list of synonyms created.

  prompt -- ----------------------------------------------------------------------- ---

  command prompt

  
  proprietary format of columns A15
  synonym_name A20 column format
  A15 table_owner column format
  format column in table_name A40
  DB_link A40 column format

  Select the owner, synonym_name, table_owner, table_name, DB_link from DBA_synonyms where Table_name = upper ('& table_name') stopped by the owner;

  
  command prompt

  prompt -- ----------------------------------------------------------------------- ---

  guest - list index created-

  prompt -- ----------------------------------------------------------------------- ---

  command prompt

  Select
  table-name
  index_name
  index_type
  nom_tablespace
  status
  of DBA_indexes
  WHERE table_name = upper ('& table_name') and owner = upper ('& owner')
  order of table_name, index_name;

  
  command prompt

  prompt -- ----------------------------------------------------------------------- ---

  guest - list of constraints-

  prompt -- ----------------------------------------------------------------------- ---

  command prompt

  format column in table_name A15
  format of column cons_type A15
  cons_name A20 column format
  check_cons A25 column format
  VALIDATED A20 column format
  column status A10 format
  last_change A20 column format

  Select
  table-name
  (case constraint_type
  When 'P', then 'Primary Key '.
  When 'R' then 'Foreign Key'
  When 'C' then 'check '.
  When 'U' then 'single '.
  When 'o' then 'read only display '.
  When 'V' then 'check the view. "
  When 'H' then 'Hash expression. "
  When 'F' then 'REF column.
  When the of ' then 'additional logging.
  cons_type end)
  constraint_name cons_name
  condition_de_recherche check_cons
  status
  VALID
  last_change
  of dba_constraints
  where owner = upper ('& owner')
  and table_name = upper ('& table_name')
  order of cons_type;

  I have another script that allows to display the newly created tables (table, table names) in the last 24 hours.

  SET SERVEROUTPUT ON;

  DECLARE

  CURSOR tmp_cur IS

  SELECT master, object_name

  FROM dba_objects

  WHERE object_type in ('TABLE', 'SEE') and the owner not in ('SYS', 'SYSTEM', 'GENERAL', "XDB", "OUTLN", "SYSMAN") and last_ddl_time > sysdate - 1;

  tmp_rec tmp_cur % ROWTYPE;

  BEGIN

  FOR tmp_rec IN tmp_cur LOOP

  DBMS_OUTPUT. PUT_LINE)

  tmp_rec. Owner | ' ' || tmp_rec.object_name);

  END LOOP;

  END;

  /

  The gap of the first script (validate_table.sql) is that it can only check table one by one by manual entry, then how can I combine these two scripts, to make a scipt that can check all newly created tables (not a table) in the last 24 hours?

  I thank very you much in advance!

  Hello

  If you already know how to find the owner and all the tables created table_name recently.  One thing you can do is to change all the WHERE clauses in validate_table.sql, so instead of things like

  where object_name = upper ('& table_name') and owner = upper('&owner');

  you say

  WHERE (owner, object_name) IN

  (

  SELECT master, object_name

  FROM dba_objects

  WHERE object_type in ('TABLE', 'SEE')

  AND owner NOT IN ('SYS', 'SYSTEM', 'GENERAL', "XDB", "OUTLN", "SYSMAN")

  AND last_ddl_time > SYSDATE - 1

  )

  ;

  Here is another approach:

  Validate_table. SQL is quite handy as it is.  You may want to run this script for tables, even when you know that they are not new.  Divide into 2 scripts: one called ask_and_describe_table.sql, which looks like this:

  -Ask_and_Describe_Table.sql

  accept invites owner "Enter table owner:

  accept invites from TABLE_NAME "Enter object (table/View...) "name:"

  -You can use any name path instead of d:\some_dir below:

  @d:\some_dir\describe_table & owner, table_name

  and the other one called Describe_Table.sql, which starts like this:

  -Describe_Table.sql

  DEFINE owner = & 1

  DEFINE table_name = & 2

  column owner format a10 column 'owner '.

  ...

  and continues with the same exact content as validate_table.sql.

  Now, to write another script (I'll call it Describe_Recent_Tables.sql):

  -Describe_Recent_Tables.sql - create and run Describe_Many_Tables.sql

  -Turn OFF the devices designed to help people to read the output:

  SET ECHO OFF

  SET FEEDBACK OFF

  SET PAGESIZE 0

  VERRIFY OFF SET

  -Create a Describe_Many_Tables.sql:

  COIL d:\some_dir\describe_many_tables.sql

  SELECT ' @d:\some_dir\describe_table '

  ||      owner

  ||      '  '

  ||      object_name

  FROM dba_objects

  WHERE object_type in ('TABLE', 'SEE')

  AND owner NOT IN ('SYS', 'SYSTEM', 'GENERAL', "XDB", "OUTLN", "SYSMAN")

  AND last_ddl_time > SYSDATE - 1;

  SPOOL OFF

  -Features lighting designed to help people to read the output:

  SET ECHO ON

  SET FEEDBACK ON

  SET PAGESIZE 50

  SET VERRIFY ON

  -Describe_Many_Tables.sql performance

  @d:\some_dir\describe_many_tables

  I guess that all of your tables have standard names (for example, start with a letter, no spaces in the name,...), which don't require quotation marks.  If they could, then the same basic approach will work, but the details are a little messier.

  When you want to see the information on a single table or view, no matter how old it is, driven

  Ask_and_Describe_Table

  or, if you do not need to question the owner of the table and the name, something like

  Describe_Table SCOTT EMP

  (You can find that you really need not Ask_and_Describe_Table.sql).

  When you want to do this for all the tables created in the last 24 hours:

  Describe_Recent_Tables

• Combining the two accounts? And why the CC says 'install' when I've already subscribed to the app (LR) and it is already installed?

  Hi guys,.

  Relationship problems (which I have had for years).

  (1) I have two accounts for some reason any under two separate addresses.  So to start, I want to combine them, how?

  (2) I agree with the case of photography for $ 9.99.  When I am connected, CC sees that Photoshop is installed and up to date (or other), but next to Lightroom, it says "install".  In addition to being just bad, I worry that I'm missing updates that CC doesn't even know that I have installed the application.

  Help, please.

  Thank you...

  Billnm know that you post to a public forum.  If you want to manage your subscription accounts then please contact our support contact the customer serviceteam.

  The version of Lightroom available via creative application Cloud Desktop is licensed differently than the version installed with a perpetual serial number.  I would recommend the disconnection of the current installation of Photoshop Lightroom and then put it back through the application of Creative Cloud Desktop.  You can find more details about the uninstall and install process to Creative Cloud help | Install, update, or uninstall applications.