Command button action method attributed to a case of navigation

Similar Questions

• Command button action is bean method. How to pass the ID parameter or reference?

  JDEV11gR1PS1/ADF
  
  The action of the button order is bean method, as follows:
  

   <af:commandMenuItem id="gbl_cmi_1" action="#{tbBean.action1}"/> 

  Bean code is something like
  

  public String action1() throws IOException {
  ...
  if (id.equals.("gbl_cmi_1"))...
  }

  Therefore, I would like to be able to know what the CommandButton ID, to be used in the assessment, etc..
  
  The reason is that several commandButtons are actually built dynamically as well and the action can be a redirect to URL. Therefore, I use the id to find what URL to redirect to.
  
  Ideas?
  
  
  Thank you.

  To do this, you have to use set listener(af:setPropertyListener) property to set an attribute in your bean or you use an action instead of the action listener (here you can get the source of the event).

  Timo

• Whose action command button does not redirect me to another page. Why?

  Hello
  
  I have a command button in a jspx page and an unlimited workflow with two pages, where there is a rule of flow control between them, which needs to redirect the user from the first page to the second page. However when the user clicks the button, the updated page actually without having to navigate to the second page. Why does this happen?
  
  Here are the details:
  
  ADFC-config:
  
  <-flow-control id rule = "__42" >
  <-activity-id id = "__43" > first < /-activity-id >
  < control-flow-case id = "__44" >
  < result id = "__49" > go < / de-results >
  <-activity-id id = "__45" > second < / to-activity-id >
  < / control-flow-case >
  < / control-flow-rule >
  
  command button:
  
  < af:commandButton text = 'Go' id = "cb1" action = "go" / >

  Well, can you give more details?
  Jdev version?
  You start the app with a url ending with ".jspx' by chance?
  If so, you must remove this ".jspx" ending as it does not start the workflow.

  Timo

• Command button is not activated after action is completed

  Hi all
  
  I am creating an Excel since the command button using a method of bean support. The command button is not activated after that action is completed. but the information load in Excel and excel also created correctly.
  
  Code method as follows:
  
  
  public void exportToExcelEventForm () throws IOException
  {
  
  
  Date dt = new Date();
  SimpleDateFormat fmt = new SimpleDateFormat("yyyy-MM-dd_HHmmss");
  String filename = fmt.format (dt) + ".csv".
  String contentType = "application / vnd.ms - excel";
  
  FacesContext fc = FacesContext.getCurrentInstance ();
  HttpServletResponse response =
  (HttpServletResponse) fc.getExternalContext () m:System.NET.FtpWebRequest.GetResponse ();
  response.setHeader ("Content-disposition",
  "attachment; filename ="+ filename);
  response.setContentType (contentType);
  PrintWriter out = response.getWriter ();
  out.println ();
  out.println ("event details");
  out.println ("testing");
  out. Close();
  fc.responseComplete ();
  FC. Release();
  
  }
  
  What is at stake in this? pls guide me

  Why not put an af:fileDownloadActionListener in the command button. In the bean you need a method like

      public void exportExcel(FacesContext aFacesContext, OutputStream aOutputStream)
      {...
  }
  

  You can use the stream output and when you finished just rinse. Do not close the stream and does not complete the answer.

  Timo

• Satellite Pro L20: Command button on TouchPad collapsed

  I visited two other flaws with my laptop in other posts, compared to those, it's very minor but its still very annoying:

  The command button left TouchPad on my laptop, usually evenly supported by the bottom, seems to have given way to one side, so that it does not work with the same action of spring on one side of the left key. It wobbles like a tooth loose.

  It's this kind of problem easily solved? Until I get a USB mouse, I'm stuck with the TouchPad, but his persistent plastic surfaces scratching against the other is infuriating!

  Your ad just brief comment: I noticed that the quality of the buttons of the mouse on laptops is not the same. On my Tecra, it is really perfect and pressure on any point will give the same result, but on laptops of low budget, like the series L, it is not the case.

  I know it's pretty annoying, but unfortunately there is nothing to do. Because of this, the use of external mouse is reasonable.

• Click the command button DOES not

  Hello

  I have a single command button on an UIR embedded in a dll I call TestStand. The button does nothing when you click sort, but when I press or , it works fine. Does anyone can say why this is happening?

  int CVICALLBACK TERMINATE_BUTTON (int, int int event, control panel,
  void * callbackData, int eventData1, int eventData2)
  {
  switch (event)
  {
  case EVENT_COMMIT:

  event action

  break;

  case EVENT_LEFT_CLICK:

  event action

  break;

  case EVENT_LEFT_CLICK_UP:

  event action

  break;

  }
  return 0;
  }

  Thank you in advace,

  JulianC

  Hello JulianC, a little research on the forum showed this thread that describes nearly the same situation as yours: you might find helpful advice, especially in LuisG post marked as solution and following.

• best practices of command buttons

  Hello

  I would ask how others view their GUI with several command buttons (OK Boolean button).

  For example, it is a simple application where the user can start data acquisition by clicking on a button with text 'Start monitoring '. Instead of having another button with text "Stop monitoring", usually I just change the label text to "Stop monitoring" button, so it is obvious to the user that clicking on that will stop the process of monitoring the implementation (in the case of this button, I read the text of the actual label with property node in order to decide what message action to the loop the loop handler data acquisition of) GUI).

  If I have another button with the label as "Record of startup file" text, I do the same way: after saving the file, change the text 'Stop-save file.

  To avoid unnecessary additional programming, this button is in the enabled state if the application is already in the State of "monitoring". In addition, if there is a current folder (+ DAQ obviously), the user cannot press the button "stop monitoring". So according to the status of applications, some of the buttons are enabled, some in 'grey disabled' State.

  I wonder how others do their app/GUI?

  I don't know if it's a good way to do, but at least I can avoid check additional status of programming and by minimizing the number of buttons...

  I use the Boolean options text in the Properties menu where you can have different text for the States TRUE and FALSE to your buttons.  This eliminates some of the code that it sounds as you write.

  Play / Pause are the two options I usually use if buttons.

• Bug HTML table/pesky command button

  I have a few products where I paste in a form of "command button" in Yahoo stores. The code looks like this:
  
  < form method = "post" action = "<!-#ystore_order id =" pbn0059 "- >" > < input type = "submit" value = "Order" > < / make >
  
  I used it in a previous site without any problems. However, in my current site, when I paste this code in my table
  When the command button should appear, it renders (in IE and Firefox), with two undesirable characters appear
  just before the command button (">"). You can see on the site, to the right of the image of pipe:
  
  http://www.pulversbriar.com/gallery1.htm
  
  I pasted the same code in an empty html page, and the problem goes away:
  
  http://www.pulversbriar.com/test2.htm
  
  So I can only assume it is something on the table, or the surrounding div/formatting HTML code that causes the problem. However, when I create a new table and paste it into the same code, the problem recurs.
  
  I was on the phone to Yahoo about it, and they say it's a problem of DW. I am not the problem, but it
  must be something elemental... right?
  
  Thanks in advance for any help with this problem. If more information would be useful, let me know and I'll post.
  
  -steve

  Thanks for responding, Murray. After that I've reworked the tables and could not reproduce the problem.
  I'll create a new post if I run this new.

  Steve

• Button action result depends on a call to a stored procedure

  Hello
  
  I'm developing an application using JDeveloper 10.1.3.4, JSF, and ADF BC 10.1.3.4.
  
  I have an "Update" button, its outcome of the action depends on the result of a stored procedure called by a method in my ApplicationModuleImpl (actionListener to the button - #{bindings ['call_stored_procedure'] .execute}).
  In particular, if the stored procedure returns "OK" the program can navigate to a new page of JSP, more of a case of navigation. If the stored procedure returns 'ERROR' no navigation should occur, the program must stop the JSP page. I need something like "raise form_trigger_failure" Oracle Forms. I tried to throw an oracle.jbo.ValidationException, but navigation take place instead.
  
  Thank you very much in advance
  
  Husband

  Load the SRDemo to jdev10.1.3 and see the classes ADFUtils nd JSFUtils. I guess they are also on the blog of Steve Muenchs here.
  Locate the getApplicationModuleForDataControl (...) method.

  Timo

• multiple lines of text on a command button

  Is it possible to get multiple lines of text on a command button.  Instead of a large button with the text "start the Test System".  I would like a big button with 3 lines.

  Beginning

  Test

  System

  If you change the label of the button control in IUR editor you can split the text into lines with Ctrl + Enter.

  If you programmatically set the label, "\n" code integration in the text of the label.

  Both methods work for all types of control, not only for the command buttons.

• hover active command button

  I created a command button through create-> command button menu option. It worked very well, but somewhere in my mucking around, I got it so it behaves as if it is pressed when I move just the top mouse button. I can't find an attribute that could trigger this behavior. Can someone help me with this?

  Thank you.

  
  

• How to get back my menu bar, command buttons, the button refresh and option buttons

  Original title: help

  How can I get my menu bar, command buttons, the button refresh and boxes option on my computer at the top screen

  Hello

  In Internet Explorer?

  1st try F11 - toggle mode full screen in the case where is defined.

  Hold the ALT key and the V key - Bar Menu DISPLAY - toolbars-.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Place the not clickable secure command button. Can't buy.

  as the title says. I'll subscribe to images from adobe and I can click on the command button secured to place inside throughout the day. It doesn't do anything. And there is no direct support. I think that adobe wants me to be able to talk to someone live if I'm trying to give them my money.

  Hello

  I solved this problem by clicking on use another payment method and relative to the seizure of the existing card information adobe has already with my account of cloud! Now his work all the

• apply the filter command button does not

  Hello experts, I have the code to apply the filter of order button below, but when I click on the command button, it runs under code but works.   Array is not be filtered:

  {} public void applyTableFilters (ActionEvent actionEvent)

  FilterableQueryDescriptor qd = (FilterableQueryDescriptor) myTable.getFilterModel ();

  QueryEvent queryEvent = new QueryEvent (searchResultTable, qd);

  myTable.queueEvent (queryEvent);

  AdfFacesContext.getCurrentInstance () .addPartialTarget (myTable);

  }

  < af:commandButton text = "ApplyFilter".

  ID = "applyFiltersCB" styleClass = 'blue '.

  actionListener = "#{viewScope.myBean.applyTableFilters} '"

  Binding = "#{viewScope.myBean.applyFilterCB} '"

  immediate = "true" >

  < / af:commandButton >

  < af:table value = "#{bindings.myList.collectionModel}" var = 'row' "

  Rows = "#{Bindings.myList.rangeSize} '"

  emptyText = "#{bindings.myList.viewable?" "{'No RECS found': 'Access Denied.'}".

  fetchSize = "#{bindings.myList.rangeSize} '"

  disableColumnReordering = "true" rowBandingInterval = "1".

  inlineStyle = ' height: 400px; "

  filterModel = "#{bindings.myListQuery.queryDescriptor} '"

  queryListener = "#{bindings.myListQuery.processQuery} '"

  filterVisible = "true" varStatus = "vs."

  selectionListener = "#{viewScope.myBean.currentSelectionListener} '"

  rowSelection = "#{viewScope.myBean.rowSelectionMode} '"

  ID = "t1".

  Binding = "#{viewScope.myBean.MyTable}" >

  < af:column sortProperty = 'year' filterable = "true" sortable = "true".

  shortDesc = 'AnnΘe Prg'

  headerText = "Year" Prg"id = 'c4' >

  < af:outputText value = "#{row.yearCode}" id = "ot6" / > "

  < f: facet = name 'filter' >

  < af:inputText label = "" id = "it1" shortDesc = "Prg Yr Filter" "

  value = "#{vs.filterCriteria.yearCode} '"

  maximumLength = "5" >

  < / af:inputText >

  < / f: facet >

  < / af:column >

  ......................................

  < / af:table >

  Appreciate any help.

  Finally it worked.    The question is the table PPR using backing bean does not display the filtered data rather than it shows full data.  If I use UI PPR, then apply filter method works very well.

• Command button disabled after af:fileDownloadActionListener

  Hello
  
  Jdev 11.1.1.4.0
  
  I have trigger af:fileDownloadActionListener for a CommandButton.
  Because I have to call javascript before I implemented the approach described in this blog:
  https://blogs.Oracle.com/jdevotnharvest/entry/how_to_ensure_custom_serverlistener_event_fires_before_action_events
  

  <af:commandButton id="cbExport" text="Export" immediate="true"
                                  binding="#{ExcelExportToolbarButton.exportButton}">
                 <af:clientListener type="action" method="getCSSContent"/>
                  <af:serverListener type="readCSSContentServerListener"
                                     method="#{ExcelExportToolbarButton.readCSSContentEventHandler}"/>
                  
                   <af:fileDownloadActionListener filename="test_export.xls"
                                                 contentType="text/html;chatset=UTF-8"
                                                 method="#{ExcelExportToolbarButton.exportCollection}"/>

  Problem:
  Af: commandButton disabled guard after fileDownloadActionListener.
  When I scroll in an af:table which is placed on the same page, then the new button gets activated.
  I tried addPartialTarget and partialSubmit = true/false, but without success.
  
  How to activate the button again?
  
  concerning
  Peter

  Peter, that button is waiting for javascript is the whole point. There is a problem if you do it that way it (check this http://jobinesh.blogspot.de/2010/01/customizing-execution-of-to-validate.html). The solution is to queue action of javascript.
  The checkBeforeDLButton method is no longer used for this reason.

  Timo