Compaq Presario CQ56 XG809UA: Compaq Presario CQ56-1150 windows 7 to 10 XG809UA

Similar Questions

• which processors I've upgraded to I have a compaq presario cq57-339wm windows 7 64 bit

  which processors I've upgraded to I have a compaq presario cq57-319wm windows 7 64-bit like faster processor, I have a processor Intel Celeron B800 now.

  This will depend on whether or not your installed version of Windows 7 is Windows 7 Starter.

  The following processors are compatible with the motherboard of your laptop.

  Intel Core i5 - 2430 M 2.40 GHz processor
  (1333 MHz FSB, 3, 0 - MB L3 cache, dual core,
  35 W; not supported on computer models
  equipped with Windows 7 Starter 32-bit
  operating system)
  √
  Intel Core i3 - 2330 M 2.20 GHz processor
  (1333 MHz FSB, 3, 0 - MB L3 cache, dual core,
  35 W; not supported on computer models
  equipped with Windows 7 Starter 32-bit
  operating system)
  √
  Intel Core i3 - 370 M 2.40 GHz processor (1066 -
  MHz FSB, 3, 0 - MB L3 cache, dual core, 35 W;
  not supported on equipped computer models
  with Windows 7 Starter 32-bit
  operating system)
  √
  Intel Pentium P6300 2.26 GHz processor (3.0-
  MB L3 cache, dual core, 35 W)
  √
  Intel Pentium P6200 2.13 GHz processor (3.0-
  MB L3 cache, dual core, 35 W)
  √
  Intel Pentium 2.20 GHz processor (2.0-B960
  MB L2 cache, dual core, TJ85, 35 W; not
  pressed equipped computer models
  Windows 7 Starter 32-bit operating system)

  Intel Pentium 2.10 GHz processor (2.0-B950
  MB L2 cache, dual core, TJ85, 35 W; not
  pressed equipped computer models
  Windows 7 Starter 32-bit operating system)

• which processors I've upgraded to I have a compaq presario cq57-319wm windows 7 64 bit

  which processors I've upgraded to I have a compaq presario cq57-319wm windows 7 64-bit like faster processor, I have an AMD C-50 processor now

  The following CPU's option upgrade processors

  AMD® E450 1.65 GHz processor (dual-core, 18 W)

  √
  AMD E350 1.60 GHz processor (dual-core, 18 W)
  √
  AMD E300 1.30 GHz processor (dual-core, 18 W)
  √
  AMD C50 1.00 GHz processor (1, 0 MB L2 cache, dual core, 9 W)

  One of the first three three registered will have a remarkable performance superior to the simple core currently installed C50.

  Coupling of those with a SSD drive for an upgrade and you won't believe it's the same laptop.

• Need to "downgrade" my Compaq Presario CQ57 of Windows 8

  A few weeks ago, I upgraded my Presario CQ57 to Windows 8.  Well, I don't like her, and I now have a desktop computer that is anyway a touchscreen that works beautifully.  I thought about my computer limited knowledge that I had created the backup disks to restore my system to Windows 7 Home Premium, but it turns out it's a repair disc.

  Is it possible for me to order the right from HP disk to return my laptop for Windows 7?  I found something on the internet with this post: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-e-g/The-Cleanest-Install-Windows-7-Recovery-D...

  I don't know what to do.  Any help would be appreciated!  Thank you!

  Hello:

  Please read the info on the link below to see how to order for your PC recovery disc:

  http://support.HP.com/us-en/document/bph07143

  I believe that my instructions are easy to follow to make your own install of W7 media, if you do more like that.

  You can also make your own regular install of W7 disc and allows to reinstall windows 7 If you can read the product key 25 character microsoft on the COA sticker on the case of the PC. You will have none of the programs supplied with the PC using this method, however.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• HP Compaq 15-s008Tu: WiFi and Bluetooth not available for HP Compaq 15-s008Tu for Windows 7 64 bit drivers

  Hello

  I'm not able to find drivers for WifI & Bluetooth on the portal of support for HP Compaq 15 - s008Tu for Windows 7 (64-bit). Please help me with these drivers.

  Thanks in advance a ton!

  Hello:

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloa dIndex? softwareitem = ob-131223-1 & cc = us & dlc = en & lc = fr...

  Bluetooth:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloa dIndex? softwareitem = ob-137961-1 & cc = us & dlc = en & lc = fr...

• HP Compaq CQ45-902TU with Windows 8 to be downgraded to Windows 7 Home Premium

  Hi all

  I bought a computer laptop cheap recently "HP Compaq CQ45-902TU with Windows 8" unfortunately cannot use it due to Windows 8' hostile user interface. I was intending to downgrade it. When I read the comments, they say I need to download drivers windows 7 first of this model CQ45-902TU HP Web site. HP site says that they do not provide it. What should I do? Is there anyone there to help?

  Thank you

  Sarah Lloyd

  Hi, Sarah:

  HP does not support PC consumers for all windows OS, but W8 64-bit systems.

  Do your series of W8 recovery discs before install us W7, as most likely the recovery partition no longer works.

  You must change a setting in the BIOS so that the laptop can boot from the installation of W7 media and for W7 run on your laptop.

  See the link below for more information.

  http://support.HP.com/us-en/document/c03736054

  You will need to find a model with a similar material as yours which has w7 64-bit drivers.

  I think that all the drivers and the software of this model should also work on your own, except the audio.

  You must install the Intel graphics driver for your model.

  DO NOT USE ANY BIOS OR FIRMWARE FROM THIS LINK FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5278311

  You can get the Realtek audio driver from the link below.

  Accept the agreement. Download and install the second on the list (W7 64-bit).

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Tile: CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Hello everyone.  My computer is adjustable having the dual boot with Windows 7 Pro on disk 0 (320 GB SATA Seagate Barracuda 7200.11) and XP Pro disk 1 (40 GB SATA Samsung SP0411C). As the two systems are available at the start but most all the time Windows 7 Pro would use. The computer is Compaq 7100, WCL PP255US, 3.2 GHZ Intel Pentium 4, 3 GB of ram, Council ch h 0968, bios HP 78 1 v01.05 16/06/2004, chip Intel 915 G Express.  According to the website of Seagate Barracuda 320 GB with (quote), ' he not there no master/slave because every player relationship is considered to be a master in a relationship from point to point.» If two drives are connected to a Serial ATA host adapter, the host operating system considers that the two devices as if they were the two "masters" on two ports separated. Both drives behave as if they were device 0 (master) devices.  On the drive Samsung (SP0411C) I put a jumper for master, it is connected to the motherboard instead of disk 1. Used rider illustrated for Samsung SP0411N since I did not see the SP0411C listed. When selecting information for Samsung Seagate site sometimes showed data for their readers. This is perhaps due to the recent acquisition of Samsung or maybe my mistake.  Tried swapping around wiring of each drive but that didn't work of course. Looked at the settings in the BIOS but did not see a way to create the dual boot.  Please let me know if you need more information. If you know how this can be done or have some suggestions, please let me hear it. As always, thank you very much for your comments.

  Oscar

  Hello oscarmint, I checked the specifications of your system and it does not show the system supports two types of hard drives.

  The system supports only Serial ATA (Sata) synchronous Maximum 150 MB/s transfer rate

  You would need to make the jumper on the Seagate 320 GB Sata Drive pin, set at 150 MB/s.

  You are right that the Seagate would not Cable Select or slave settings and it would be the master and only on cable.

  If the 40 GB hard drive is a type of ATA (IDE), you'd better put as selection of cables (CS).

• Compaq nx6110 driver for windows 8.1 required

  My grandfather died and left me his Compaq nx6110, I installed windows 8.1 but no soundis work.

  the drivers of xp in the sp30130 utility does not work in win 8.1 has someone has a solution.  Thnaks in advance

  Hello:

  It is not a sound driver W8.1 for the nx6110.

  Try to manually install the Vista driver as follows...

  Download and run the Vista driver.  Conclusion of any windows error.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=449878&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_47263_1%257CswEnvOID%253D2094%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Go to Device Manager and click on the multimedia audio controller needing drivers.  Then click on the driver tab.

  Click on set to update driver.  Select her browse my computer for driver software method and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp34702.  Make sure that the include subfolders is selected and see if the pilot goes like this.

  If this is not the case, go back to her browse my computer for driver software window and this time at the bottom, select Let me pick from a list of drivers for devices on my computer.  Select disk and go to C:\SWSetup\sp34702\i386\Vista\smwdmch6 and select the SoundMAX Integrated Digital Audio in the list and see if the pilot goes like this.

• Presario CQ62, test windows 7 says no disc hard bootable status oxc000000e9

  Presario CQ62 with windows 7 test says no disc hard bootable status oxc 00000e9 an unexpected i/o error has occurred, how do I fix

  Looks like the only option is to replace the hard drive. In the case of 6 hrs and heat probably killed.

• My dell Inspiron 1150 windows xp password son has locked and the screen will not change, we do not know the password or have we not the reset disk, how can connect to reset password

  My dell Inspiron 1150 windows xp password son has locked and the screen displays the dell logo and says that I need the master password or administrator, my son can't remember and we do not have the reset disk, is it possible to get and reset the password or enter the system

  If you are using XP Home Edition, the built-in Administrator account probably doesn't have a defined password. You can start in safe mode, where this account will be selectable when connecting. It allows to connect and change the password of your normal connection.

  To start in safe mode, keep hitting F8 twice a second after turning on the PC until you get the start menu where safe mode is selectable by the up/down arrow keys, and then press ENTER.

  If you are using XP Professional, try to connect using the built-in Administrator account. You don't need to do it in safe mode (although you can if you wish). If your normal login screen is a display of the user symbol and hit ctrl-alt-del twice to get to login to text entry. Type administrator as the user name and try a blank password.

  See also http://support.microsoft.com/kb/321305

  Tricky

• Driver Ethernet LAN required - laptop Compaq presario V3777TU for Windows XP

  I removed vista and installed windows XP in my compaq presario V3777TU , but I could not find the suitable driver for Ethernet LAN. Now my system doesnot detect LAN. Card Ethernet in my system is integrated 10/100BASE-T Ethernet LAN.

  Corinne

  You have Marvell Yukon Ethernet:

  FTP://ftp.HP.com/pub/SoftPaq/sp37501-38000/sp37792.exe

  Message edited by CherylG on 03/01/2009 18:55

• Compaq Presario CQ60: Reinstalled windows Vista Home premium

  Compaq Presario CQ60-420US, 579000-001 motherboard, Windows Vista Edition Home Premium 32-bit.

  After 6 years of use (excellent), had to install a new fee and hard drive install Windows.

  No manuals, disks or instructions available.

  Now I have no internet access: what follows is marked with a yellow triangle with an exclamation mark inside.

  (1) video cards

  (A) standard VGA Graphics: not installed or running

  (2) network cards

  (A) Realtek RTL8101: not installed or running

  (3) other devices

  (A) Ethernet controller: not installed or running

  (B) acquisition of ICP data: not installed or running

  Controller of Bus SM C): not installed or running

  (D) unknown device: not installed or running

  (E) video controller: not installed or running

  Any help is greatly appreciated, thank you.

  Hello:

  Of the hardware ID you have validated, you need the driver for the wireless card: PCI\VEN_168C & DEV_001C:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881&swItemId=ob_108905_1&swEnvOid=4059#

  Try the driver directly from realtek for ethernet controller... a first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Compaq Presario SR2009UK - upgrade Windows 7

  Dear all

  I have a Compaq Presario SR2000UK and am looking to upgrade to Windows 7

  This machine had Windows XP installed, but since the end of the Support I got in trouble, decided to upgrade to Windows 7.

  First of all, I updated the Bios on the Hp website 3.24 Version dated 2007-06-29

  Then using clean installed Windows 7 Ultimate 32 Bit SATA hard drive.

  Installation went perfectly with 2 partitions (reserved system & Operating system) windows implementation

  Once windows had started active device manager and all the drivers were like OK.

  Restart the computer several times since the Start button of windows without problem.

  Now comes the question

  What computer was off nights windows does not restart.

  1 press button and the bios blue screen power light, I hear the startup hard drive work then the screen goes black and turns on the windows logo, but after a second the screen flashes and blue bios screen on again once him lights up the screen Windows Recovery Manager saying computer failed to start and get the 2 options.

  1 Let's repair (recommended) windows

  2 start Windows normally

  Option 1 passes through the long process of repairing then windows starts.

  Option 2 tries to start windows but crashes before the color of windows logo appears.

  My other option is to restart, and then press F8 for advanced options, and then on starting in safe mode that work very well.

  Restart windows start button and the machine is in reverse OK until it is turned off for a few hours, then I'm back to the same problem.

  Have you checked the battery Cmos and is OK

  Think there may be a Bios problem but couldn't find any version after 3.24

  Thank you very much John

  Specifications:

  A look at the motherboard and I see at least 3 capacitors that are starting to develop at the top so that you can not see the cross in silver leaf.

  Try things during these days and the problem now is getting worse.

  Thanks for all your help and your will has now seek a cheap replacement card to match the processor and ram.

  Concerning

  John

• upgrade sr1320nx compaq presario desktop from windows xp to windows 7?

  Graphics card and all the drivers necessary to convert the Compaq Presario SR1320NX Desk Top of Windows XP to Windows 7, which is compatible with the Aero display system?

  baseball2013,

  Here are the specifications of your Compaq Presario SR1320NX desktop computer and its (salmon) K8S - THE motherboard. According to the specification, this model was presented for sale on or around 12/01/2004 and is unlikely to be fully compatible with Windows 7. At a minimum, you will need to install a Windows 7 "Aero" capable AGP 8 x video card. You may experience other problems as well. After I installed Windows 7, update complete including SP1 and all the updates/drivers that it provides.

  Post back with any problems.

  Please send Bravo

• Drivers Compaq Presario 7464 for Windows 98

  I found an old motherboard that seems to come from the Presario 7464, and I need the drivers for it. I am trying Windows 98 on it (and Yes, I know that 98 is no longer supported). I use it for all my old programs that do not work on my new computer. So, can someone please give me a link where I can download? I would be really grateful if someone could.

  Please try Compaq Presario Desktop PC 7464 drivers & downloads.

  Please send BRAVO