Compaq Pressario 8000 T-P8657A desktop P4 3.0HT GHZ/800

Similar Questions

• Compaq Pressario: what is my graphics card?

  Hello

  Due to a power cut, I was obliged to re - install windows 10 on my old HP desktop computer, but the display is now crushed. When I look at the graphics card it just says 'card Microsoft Basic.

  I read somewhere that the right adapter would be identified after 10 windows were updated, but windows 10 is now fully updated and the correct graphics card has not been detected.

  The only resolution I can get is 1024 x 768. The resolution box is grayed out and the drop-down arrow doesn't work, so I can't change the resolution at all now.

  Is there a way that I can find that my graphics card is really, while I can get the correct driver for it?

  Here are the details of my computer;

  Desktop Compaq Pressario PC

  Model: SR 2029UK

  Prod #: RF78SAA-ABU

  s/n: [personal information]

  I hope that someone can help you.

  Thank you very much

  Tog

  Hello:

  The only suggestion I can offer would be to try the W8 driver and see if it works.

  There is no driver for the graphics card W10 has your PC.

  http://www.nvidia.com/download/driverResults.aspx/82758/en-us

• I have a hp compaq pressario c797ee, I not create recovery disk and lost data. Help, please.

  I not create recovery disks, in fact could not create because the DVD could not be the installation program appropriate for the burn. When I realized how do it, I had already deleted the recovery partition and had lost data recovery. The name of product HP Compaq pressario C797ee, the operating system is Windows Vista Home Basic Edition. Please tell me the link where I can download the recovery disks from which any alternative appropriate.

  Hello

  Please use this:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

  Kind regards.

• laptop Vista HP Compaq Pressario 32 error 0 x 0 will not come all of a sudden

  I have 32 bit HP Compaq Pressario laptop running Vista; He's not coming!

  I tried to repair safe mode, 0 x 0 keeps,

  When I tried to run the System Restore, which goes back a month I got the 0x80070017C error code

  I tried to command prompt:check the disc.

  I ran diagnostic memory tool,

  I'm stuck, please help, a friend told me my laptop hard drive is probably damaged and need repair... help please...

  Hello

   
  1. what has been the result of safe mode, startup, repair, and check the disc?
  2. What is the full and exact error code that you get?
   
   
  Method 1 : run the last good known Configuration, if you have not done so earlier and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode 
   
  Method 2: perform the steps in the article and check if the problem occurs.
  http://support.Microsoft.com/kb/934540 
   
  Hope that helps.

• Router for Compaq Pressario R3000

  I have my 6 year old Compaq Pressario R3000 and the Belkin router with a speed of 54mbps. I tried the new Belkin and Netgear routers, but have no connection. Should what router I buy?

  Hi, Boris:

  The driver that I posted was not always your PC to connect?

  That is regrettable. Technology is changing every day, and things become obsolete.

  Kind regards

  Paul

• I locked myself out of my PC under XP. I changed my password and then quickly forgotten. "Dumb"! How can I regain access to my PC? It is a Compaq Pressario SR1250NX model. Help!

  I did it by always requiring a password for all user accounts

  Once again. My OS is Windows XP Home Edition

  My PC is Pressario SR1250NX

  Hello
   
  I suggest you to follow the steps in this article and check if it helps:
  
  How to connect to your Windows XP-based computer if you forget your password or if your password expires
  http://support.Microsoft.com/kb/321305
   
   
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.
  
  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/default.aspx/KB/189126
   
   
   

• Compaq Pressario v3300: pressario laptop computer v3300 is not says booting configuration setting necessary.

  Hello friends,

  My old computer laptop pressario laptop computer v3300 is not says booting configuration setting necessary. CD rom is not working is there medium to transfer its data to new laptop with OS 8.1

  concerning

  Hi there @Kwatra_ps

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are looking for a way to transfer data from your old laptop to another. I'm happy to help you.

  Take a look at the following pages for some methods that you can try.

  How to transfer data between two hard drives - weecast.fr

  How to recover data from the hard drive to a laptop Dead - weecast.fr

  Assuming that your hard drive is readable, you must find a compatible external drive bay for your laptop hard drive. Remove the disc and install it in the Bay, then you can use it as an external drive and then copy data to it at your leisure.

  Another question, you will probably encounter is file permissions if the old drive is attached to another windows device. See the following, the same principles also apply to Windows XP.

  How to understand these 7 confused files/Windows share permissions

  I hope this helps.

• Compaq Elite 8000 PC Convertible (CMT) E8500

  I updated my BIOS for v1.13 but I can't ME Firmware update called sp54355 updated 5.2.1.1001 to version 5.2.5.1039 update; It acts as if it is not for my computer model type; However, it does not say whether a 8000 Elite (CMT)

  Also, I've updated my the Active Intel Client Manager HECI device driver, but I don't know where to go to see the update has occurred.  I see nothing in Device Manager.

  Also, I wonder if there's an update for my Ethernet which is Intel 82567LM-3 Gigabit Network Connection.

  If you can answer the three questions, I would be very grateful.

  Just to make sure that you can see what I've done and perhaps adivse me something I might have missed; I did all the updates that are listed below on my computer using Windows 7 Professional 64 bit

  I upgraded my Realtek 6.0.1.6383; BIOS for V1.13, Nvidia to 8.17.12.9708, my chipset to 5.2.0.1008 I still cannot be confirmed

  Hello:

  I can answer some of your questions and provide some friendly advice on updating the ME firmware.  Do not.

  You use the PC in a corporate network environment where you need manage the remote PC?

  If this is not the case, there is absolutely no need to worry about the AMT/HECI, etc..

  Everything I have read are the forum messages unhappy members who manage to firmware update the ME, then their PC no longer works and produce a kind of halt of BIOS code.

  So I can't help you with that one.  I have an 8000 Elite CMT a 8200 Elite CMT and they work very well with their BIOS updated and the original ME firmware installed.

  Always remember... If it ain't broke, don't fix it.

  HECI: This is another term for the Intel Management Engine Interface and you can find the driver for it by going into Device Manager, expand the peripheral category system and you will find a device labeled Intel Management Engine Interface.

  A click on it and click on the driver tab.  I use W8.1 on my 8000 Elite but I think on W7, there's a driver named HECI sys (clicking on the driver Details button) and you can look at the date of the version of the driver from the engine main screen window. In any event the HECI driver installs the Intel Management Engine interface device.

  The details of the pilot on mine show some something or other metadata.

  Finally, you can find the latest version of the driver for the NIC directly from Intel on the link below.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=18713

• Missing CD drive and Audio output. Compaq Pressario V600

  Hi all

  Need help with my daughters laptop Compaq Presario V600. It worked perfectly until recently and all night, lost the CD/DVD drive and sound card

  I have searched and tried all sorts of fixes to look in the Device Manager to remove the cd and then drive re-booting the PC (but there is no CD/DVD not listed anywhere in the Device Manager) I tried to delete upper and lower filters in the registry (courtesy of Microsoft) , but does nothing. According to the Device Manager and search him in the PC there is no CD/DVD or an audio output device installed tried to start in safe mode to search for drivers... still nothing

  I searched on the site of HP/Compaq drivers and DL the driver audio and installed, still nothing... really don't know where to turn. Anyone able to help? My daughter fell into a PC repair shop who said it was one of those things with tops to turn Compaq...

  Thanks in advance

  Ed. One thing that happens, there is no noise at all and clicking on the loudspeaker in the toolbar Gets a message saying that no audio output device installed... However every now and then it turns off a very high-pitched...

  Hi Bravoman352,

  I suggest you try the following steps:

  Step 1: System Restore: System Restore to put the computer's system files to an earlier point in time.

  Look for the steps mentioned in the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Step 2: You can follow the steps in the link below by HP

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00817052

  Step 3: Check in the BIOS (basic input-output system), if the devices are turned off.

  You can restore the default settings of the BIOS, please check with the manufacturer of the computer before trying this step.

   

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists, contact HP for assistance

  http://welcome.HP.com/country/us/en/contact_us.html

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Compaq pressario all-onesg2: where is the card on a compaq pushing all-in-one Sg5.I wireless have back, but do not see it.

  My wifi stopped working and at startup messages indicate a defective wireless card or the connection, but I can't. With broad back, I see the motherboard, power supply, etc... but wireless card unless it's under the motherboard?. Thanks for any help.

  It is very similar to the Board of Directors you provided but mine is a sg2-210uk and I have now found the card under the motherboard. Thanks for your comments, that it encouraged me to look underneath and search. Excellent forum with a quick response.

• Compaq Pressario CQ56: Admin password not known - system disabled

  I tried to get into the bios, but do not know the Admin password.  I'm getting the erroe SYSTEM DISABLED - key: 55433066.  Any ideas what I should do next, thanks, Dave

  Try this 40591068

• HP Compaq Elite 8000 small: what type of cable should I use for dell dual monitors hp compaq 8000 elite?

  I'm not very tech savy when it comes to computers. I'm trying to understand what kind of cable I need to buy to allow both of my Dell, monitors to connect to the back of my Tower. I have only 1 connection vga at the back of the tower.

  Not at all.  Gold is one of the best drivers.

• OfficeJet Pro 8000 Wireless: Wireless Desktop 8000 jet doesn't work when connected by USB

  I used my printer wireless without problem since 2009. A few weeks ago, the wireless connection has been lost. When I tried to re-login, using the wizzard rint and scan for Windows, he doesn't get the device unless the USB cable is connected.

  I ran the Page of Configuration of HP network and the status of the wireless has been 'disconnected '.

  Suggestions for how I can get be seen wireless printing? It is a real pain always have to plug into print all - a little defeats the pourpose to have a wireless printer.

  I found myself actually to do this exact thing before reading your post. It worked - thank you for your help!

• Microsoft wireless desktop for v8.0 transmitter/receiver 2.4 ghz 800 drivers

  Come on, microsoft Wireless 2.4 GHz TRANSCEIVER v8.0 800 office, running xp pro on pc and installation wizard application software to support all. Anyone got any idea what & where I can acquire. Thanks in advance. Ken

  Hello

  Welcome to the Microsoft Community and thanks for posting the question. According to the description, you are unable to complete the installation of the Microsoft Wireless Keyboard 800 desktop 2.4 ghz transceiver v 8.0.

  I understand, it must be very difficult, when things do not work as expected. Please answer a few questions to refine the question.

  1. you are trying to install the software CD/DVD or through Online?

  2. What is the full error message?

  3. are you able to install the other program successfully?

  I suggest you to download the driver for the device in the article below and check with the question.

  800 wireless keyboard

  http://www.Microsoft.com/hardware/en-us/p/wireless-keyboard-800/2VJ-00001#support

  Provide more information about the issue so that we can help you.

• HP Compaq Presario Media Center SR2050NX (Pentium D 2.8 GHz, 1 GB RAM, 250 GB HDD)

  Hello, the computer I have has the same when I first bought, error messages all the time, very slow, etc.

  I got a disk with my computer when I first bought, so I'm not sure how to format and start over. I don't want anyone to try to talk me out of it, it's really nothing important and it's all I have saved and printed licenses (xp, office 2003, avg).  I would like just a way to start over.  I heard that if maufacturers you do not send a disc that came with your computer there is a way to do it on the machine.

  Can someone tell me how to format my pc and start this new if possible?

  Thank you very much, sorry for not noticing the PIN.