Compare the report not showing the changes

Similar Questions

• When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  You probably use drawing markup tools. There are options to print with or without annotations. You can not change this.

  If you don't want them to see the prices, either remove the original document and recreate the pdf without them there or you can use the redaction tools in the full paid for version of Adobe Acrobat Pro.

• View the report not showing after test button

  It's really weird, if someone of you guys have had this problem before. It seems that teststand does not report. but I triple check all report parameters and parameters of the step and I have the same sequence of work on another computer and print the report. I tried to do a repair of windows testand and it didn't work either.

  There is an option in the settings of the Station to disable recording for all sequences of result. Can you check this setting and confirm that it is not enabled?

• Problem with the files not showing (after changing the USB mode)

  I have a sansa fuze 4 GB. version V02.01.09A. OS: Vista Service Pack 1. My rocket was working fine until about a week ago, when it stopped charging. but after installing the new norton 360 sansa is more appeared in my computer or Windows media player at all. I tried updating the driver but it says that the pilot was already up to date. I tried other USB ports again (front and rear), did not work. I decided to change the USB mode and it has finally started to load again in MSC mode.

  now, for the problem I currently have and, when I click on sansa via my computer and go to the music folder, it says "this folder is empty". I unplugged and watched in my music list, and all the music is there. I tried to put a new song on the player, disconnected, and when looking through the songs of the player the new song is here. I reconnected it, the new song is in the music folder, but the other songs are not listed. In addition, I have a microSD card that is listed as "o" in the car, all the songs I had on this appear, but not those on memory internal to the sansa.

  How can I get again list all music files in the folder?

  Note: I do not sync as it has only some of the songs I want on my sansa. the way I add songs is to copy and paste to the folder of the sansa player

  Okay, I don't know why or how, but it works now in MTP mode. I saw you are solutions, but I decided I'll just change the mode before trying to have ideas. until I reconnected it I also removed the microSD card, and it worked perfectly (make a backup of my songs). the problem could have the sd card in all this time?

• Currency decimal value based on the report not showing amount in the region

  Hello

  I have a requirement to display the quantity as decimal based region based on org_id for account analysis report, the responsibility of subledger accounting.

  If the currency code is Bahrain, amount should display to 3 decimal places. ex - 2000.000

  If the currency code is Riyadh, amount should show to 2 decimal places. ex - 2000.00

  SELECT entered_dr FROM XLA_AE_LINES WHERE AE_HEADER_ID= 852128

  Could someone suggect me please on this requirement.

  Thank you

  Anill

  Hello

  Ifitis report of XMLP, check below.

  There may be other ways, but I know that this path...

  If p_curr = field 'Bahrain' then shape with 3 decimal places

  If p_curr = field 'Riyadh' then forms with 2 decimals in rtf.

  Hope this will help you.

• Possibility to check/compare the configuration on the Ironport changes?

  Hello

  We have 2 devices of Ironport S370 and several directors of the devices.

  Does anyone know of a tool that could help us audit/compare the changes made by each Director? Replaces the political categories and custom specific URL access.

  Thank you!

  This script can help you: it creates the configuration file, it transfers by FTP and sends the diff between the latest two files from your email config:

  #! / bin/bash

  ironporthost = "192.168.42.42".
  ironportuser = "admin".
  ironportpass = "password"

  configdir = "/ home/backup/ironport.

  "emailalert ="[email protected] / * /"
  EmailSubject = "Ironport Config Diff.

  pathtosshpass = "/ usr/bin '.
  pathtossh = "/ usr/bin '.
  pathtolftp = "/ usr/bin '.
  pathtomail = "/ usr/bin '.

  # create the new configuration file
  ${pathtosshpass} / sshpass Pei ' ${ironportpass} "${pathtossh} / ssh-l ' ${ironportuser}" ${ironporthost} "saveconfig 0".

  # fetch configuration files
  CD ${configdir}
  ${pathtolftp} / lftp u ' ${ironportuser} "," ${ironportpass} "EI" mget EI/configuration / * xml & output "${ironporthost}

  # Send diff of the last 2 files
  files ='ls t *.xml | head - 2 '
  configdiff = "$files diff.

  echo ${configdiff} | ${pathtomail} / mail-s "${emailsubject}" ${emailalert}

• Report do not show when the page is refreshing

  Hello
  
  I have a report of patient privacy and I have a column in the report at the end of TREATMENT DETAILS. When I click on DETAILS of TREATMENT and then move page command no 2. This page show me last visit treatment details report in a region and here I use the second area I add the current processing status. There is point four
  
  Checkbox name 1-disease
  2 - symptoms name box
  Checkbox name of 3 treatments
  medicine-4 Select name
  My first query of the region is

  select A.P_NO,A.P_NAME,B.DISEASE,B.SYMPTOMS, B.VISITING_DATE,B.TRET_NAME,B.MED_NAME,B.MED_COUNT FROM PATIENT_DETAILS A, PATIENT_SYMPTOMS B WHERE A.P_NO=B.P_NO AND A.P_NO =:REQUEST

  using these four point I fill in the details of current patient treatment and resend medicine by using select list but if he is NOT as medicine of Disprine salt; ECT list then add new drug I create a link when I click on this link then control will again page-3 and add new drug .but after submitting the new medicine and click on the "BACK" button then control access page - 2 and the treatment of the patients first region report do not show.
  
  I want to show this report when I click the back button on the page of no - 3.
  
  How can I do this...
  
  Thank you
  
  Published by: Ed on April 30, 2010 04:57
  
  Published by: Ed on April 30, 2010 04:58
  
  Published by: Ed on April 30, 2010 05:48

  Hi Maury,

  I changed your application and it's working now. The problem is, you set the number of patients at the request of page No - 7 when the link in the page no-6 is clicked. When you get back from page no-5 after the addition of medicine, demand comes from page no - 5 and it doesn't have the patient not inside, so the report query returns all the data.

  I added an item hidden in page 7 and I am the focus with the patient No. 6 and used page in the report query. The value of this element will not change until you change it or the session expires or you click on the link in the page no-6 for another patient. Hope this helps :)

  Thank you
  Machaan

• When changing my Web site in frontpage on my computer, it changes in Internet Explorer but not in Firefox. Other computers show the change in Firefox. How can I fix my computer?

  My site was created in Microsoft Frontpage by using Internet Explorer. I added to Firefox, but when I try to make changes to my site through Firefox, it won't work. I have to make changes through Internet Explorer. On my computer when I go to Firefox and visit their Web site, it does not show the changes I did in Frontpage, but on other computers when you go to the site through Firefox, the changes are there. How can I fix my computer so that I can see my changes to Firefox and Internet Explorer? Thank you for any assistance.

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

• When I use Firefox to watch the changes I make to the HTML files locally, it does not show changes made to images, unless I restart the browser. Is this a bug?

  I have the local and versions at distance of a page is open in two tabs. I change images (keeping the same name in the HTML code) and download the modified image. The tab that displays the remote page does a refresh to show the change. The tab showing the local page of do not. I tried to open it in a new window, but it still doesn't change. Only if I restart Firefox does show the change. Why? Is this a bug?

  Try using Ctrl-Shift-R or Ctrl-F5 to reload the page. This tells Firefox to reload all the content on the page, ignoring cached assets copies.

  I don't know why this is happening in the first place, although I suspect it may have something to do with the fact that the remote copy is loaded from a web server (including a bunch of headers allowing browsers to know when we need to get a new copy of an asset), while the local copy is loaded directly into the file system.

• do not show hidden files, folders or drives - in the view tab - button will not change

  • Windows explore-
  • Organize-
  • Folder options and research-
  • See tab-
  • do not show hidden files, folders or drives button (small blue dot)

  It will not disappear.
  There is no button 'Show hidden... '. ».
  There is only 'don't show me. " ' button.
  It will not change no matter what I do.
  Most other items in the view tab have check boxes or replacements to choose.
  This is not the case.

  I want to see everything.
  What gives?

  P.S. On a side note - I was looking for initially c:\programdata (directory). That's how all this started. I FOUND IT, is told in passing. HOWEVER - IT DOES NOT EVEN APPEAR ON THE PROMPT BACK - OMG.

  Just thought I would add that :)

  Hi JoeNed,

  I see that you have some problems with the display tab in windows Explorer. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  Start the computer in safe mode and check if that helps.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Method 2.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Method 4.

  You can try to restore the computer to a date earlier and check.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Method 5.

  I would like to create a new user account and check if that helps.

  Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account

  If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Create a model that can be replicated, but will not show changes in the original model, which occurs in any comps duplicated from it?

  I imported a doc I - 4 layers. Then I dragged these 4 layers in a new comp - comp1. I would like to reproduce this model so that I can try different things using these same 4 layers. But when I duplicate the comp I did - comp 2 - any change I make appear in comp1. How can I create a model that can be duplicated - but will not show changes in the original model, which occurs in any comps duplicated from it? Thank you very much!

  (CS5.5)

  It is a common misunderstanding when you start working in Ae. It takes time to get used to, and even veterans are still this error from time to time. Here's the thing, you have to get in your head: your project Panel is where your source material is, and the timeline is the place where there is a representation of this source. This means that if you duplicate an item in your timeline (particularly relevant for the precomps) it will duplicate a copy, not the source. so, if change you it - it will change all instances of this copy. If you want to duplicate a precomp and create another source, you will need to do it in a 4 step operation:

  1. duplicate your precomp in the timeline (you got that day)
  2. Select the source of this copy in the project Panel (currently the same precomp)-right click on the-> precomp 'reveal the source layer project.
  3. duplicate the precomp selected in the project Panel
  4. replace the copy in your panel mounting with the duplicate of the Source Panel (shortcut - Ctrl + alt + / when both are selected, or drag it to double with pressing Alt)

  what you are really duplicate the precomp twice - once in the project window and once in the timeline, and then one link to the other.

• Why am I being charged every month on my credit card, but im not getting no not my app services! and because the system does not show me as a premium member I can't contact anyone for my refunds or changes! Help, please!

  Why am I being charged every month on my credit card, but im not getting no not my app services! and because the system does not show me as a premium member I can't contact anyone for my refunds or changes! Help, please!

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Problem with the Organizer - it does not show changes to ACR

  When I open JPEG files in ACR, apply the changes (for example, Saturation - 100), click done, and then to open these files in the Organizer - it does not show changes in the cab so that I can't use an option File/Export as a new file. When I click on this file in the Organizer menu and open again in the editor, the image opens in ACR (not Photoshop editor) with changes

  
  

  In the example below you can see that in the Organizer in metadata / Camera Raw/Saturation (in Polish "my") = - 100, but does not show the image in black and white. I do something wrong? Help, please.
  

  
  

  

  In short, the changes you make in ACR are saved in the section of metadata of jpeg files when you click on "Done" you demonstrated.

  You are right, the thumbnails are not updated in the Organizer, and changes are not taken into account when the export of the Organizer (unlike what I thought).

  When you reopen the file of the editor or organizer, it is automatically opens again in the ACR dialog box and leaves you the choice of the original version, the default value 'auto', ACR, your 'custom' corrections correction or corrections of the already modified the file. That's fine when you modify or re - edit files individually, but this isn't the solution for the process of 'batch' as an export or by applying the same correction to a batch of files.

  My suggestion is to use a workflow that I tested recently.

  Let's say you have a batch of 20 files JPEG editing in ACR.

  -You can open them all in the cab to the command "open in camera raw" Editor.

  -You can leave the default conversion of ACR or add other corrections to some of the files.

  -to highlight all the files in the film strip and click 'done '.

  -You use the 'save' button to convert to DNG with the options you want. (I choose to create in the same location)

  As a result:

  -your files JPEG is unchanged, no thumbnail is updated, the corrections are ignored in the export process as described above.

  -You can import the DNG of their location (with a record of 'control' can help).

  -the DNG is displayed with thumbnails updated

  -they can be exported as you want

  -You can see JPEG and DNG files

  -You can even ignore the original JPEG (the DNG format keeps intact with a reasonable increase in file size).

  -If you want a redundant storage, we can use the function 'automatically suggest photo stacks' for battery original JPEG and DNG.

  If it works for you?

• How can I change the workspace to a color for my computer screen will not show

  How can I change the workspace to a color for my computer screen will not show	Submit question

  	Submit question

  Photoshop CS6 now opens by default with the "Application Framework" lighted. You can go window > frame application in the main menu and uncheck this

  We have a lot of useful information in the FAQ section. The answer to this question was also there. See the link:

  FAQ: UI - how do I change the color theme, text size, or cut the course of enforcement?

  Feel free to browse other FAQS, there might be a few other things of interest.

  Guinot

• do not show status report using view the web document.

  Hello!
  
  I use oracle 10g and I've been running report using view the web document that it works correctly.
  
  I want that
  When I press the button then Server do not show report but report wil run succssfully in the server.
  
  any body can tell me that how can I do not show the status of the report.

  Problem have been sene using javascrip as follows

  WEB. SHOW_DOCUMENT ('javascript:window.open (http://severname/reports/rwservlet?destype=FILE&userid=&desformat=PDF&yourparameters&report=reportname.rep&PARAMFORM=no); self.close ()');

  Published by: Hashim Raza Syed on January 6, 2011 23:37