Currency decimal value based on the report not showing amount in the region

Similar Questions

• Calculate values based on the boxes are checked - for Dummies...

  Hello and thank you all in advance for your help. I'm trying to calculate a value based on the boxes checked. Specifically, I would like to add a particular value $$ each CheckBox and if this box is checked, I want to add to the total rental value (see screenshot below):

  

  As you can see in the screenshot that I have different areas that can be selected (first floor, court before, etc.), I want to assign a value to the checkbox of each region (and added value for others) and calculate a total in the "Balance of rental fees" less the deposit. I'm new with java and scripts but not know how to do it in an excel formula. I guess it's very different from what little I know of Java. Any help you can give me would be greatly appreciated.

  Calculation options are in the text field. In this screen, you only need to set the value of exports to the amount this box represents.

• VI to convert input signals NI 9402 in a RPM value, based on the frequency of the pulses

  Hello

  I'm looking for a VI convert an input signal NI 9402 in a RPM value, based on the frequency of the pulses. Is there such a thing that exists in the library of national instruments?

  I run LAbview 2014 integrated control and monitoring on on a cRIO 9802 high performance integrated system with NEITHER 9402, 4 channels, 50 LV, LV TTL Module input/output digital, ultra high speed digital i/o for the cRIO module.

  Any help would be greatly appreciated.

  The easiest way is to use the FPGA to get the time between the edges of your pulse increase (shift registers to maintain the current situation and the time will be necessary).  This will give you the period.  If it's a single pulse per turn, then the number of laps is just 60/T, where T is the time in seconds.

• values based on the following logic 'values after the first values of two '_' and before last '_' values '.

  Hi all

  I need the values according to below 2logics in a single select query using instring and substring

  1 values based on the following logic 'values after the first values of two '_' and before last '_' values '.

  2 values based on the following logic 'values after the first values of two '_' and before last'-'values '.

  EXM:

  Entry: ABCD_EFGH_IJKLM - NOPQ_XYZ output: IJKLM - NOPQ

  Entry:. ABCD_EFGH_IJKLM - NOPQ output:IJKLM

  Thank you.

  Check the following

  WITH DATA1 AS

  (SELECT "ABCD_EFGH_IJKLM - NOPQ_XYZ" double val)

  UNION ALL

  SELECT 'ABCD_EFGH_IJKLM - NOPQ' double val

  )

  SELECT SUBSTR (VAL, INSTR(VAL,'_',1,2) + 1, DECODE (BIGGER (INSTR (VAL, '_',-1, 1), INSTR(VAL,'-',-1,1)), INSTR (VAL,'-', - 1, 1), LENGTH (VAL) + 1, INSTR (VAL, '_',-1, 1))-(INSTR (VAL, '_', 1, 2) + 1))

  OF DATA1;

  Concerning

  Salim

• Fill a field value based on the value of another field

  Hello
  Could someone tell me what is the problem with the following select statement. For a group of records, trying to fill a field with a value based on the value in another field (problem of status), but the Group of records appears empty just when I put this code in the field.
  Any help would be appreciated
  Thank you
  
  
  <? choose:? >
  <? When: IssueStatus = "Open"? >
  <? 1? >
  <? end when? >
  <? otherwise:? >
  <? When: IssueStatus = "closed"? >
  <? 2? >
  <? end when? >
  <? otherwise:? >
  <? When: IssueStatus = "Unresolveable? >
  <? 3? >
  <? end when? >
  <? end otherwise? >
  <? end to choose? >

  Use the following syntax.

  
  
  Display 1
  
  
  Display 2
  
  
  Display 3
  
  
  

• The default value based on the field from another table to a custom object

  I'm trying to set the default value to a field in the custom object to the value of a field of account. I tried the syntax 50 ways different and just don't get the case. The label for the account field displays the form of s/n, the integration of the tag is ltDBA_ACCT and it appears in the fx reports area as Account.Text_22.
  
  The field of custom object that I am triying update is also called s/n, which was originally the required field 'NAME '. The name of the table, account, should it be included? Do I need a function to the field?
  
  I've updated the external ID using the line with syntex < ID > ID (at least higher ID) so I know that it is possible to define a default value, but s / < n >, < ltDBA_ACCT >, 'account '. "" S/n "and so on are simply not working.
  
  If anyone knows how to get into what I would be really grateful for the help.

  OK, so if you default a field to the value of another object, you must use the JoinFieldValue function. I think you understand that, based on your original post, but I want to be sure you do.

  Then this won't work by default if the folder is created from the object that you want to join the because a default works in record creation and the ID must be available so that it works correctly. It will not work if you choose the record of the related object after that registration of the custom object is created. You can set the default after, but that does not meet your requirements.

  The syntax of the default are the following: JoinFieldValue (ref_record_type, foreign_key, field_name).

  In your case, ref_record_type is '', foreign_key is [] and field_name is ''. The best way is to determine what is the name of the field to create a new workflow for the account and use the Workflow Rule Condition expression builder to choose your field ("DBA") in the list. The value returned by the expression builder must be placed in the field_name variable in the function JoinFieldValue (minus the parentheses and quotes).

  Give it a shot and let me know how you do.
  Thom

• How to disable the LOV values based on the State of some?

  Hello

  I have a requirement like this.

  (1) LOV Field (1), when I get a value here then based on the query I get two new values and assign to another two LOV Fields (2,3) and then disable them. However, when I enter the value in the field LOV (1) based on one of the conditions I won't have no default value then LOV fields must be enabled so that the user can select the values of LOV.

  (2) now an another LOV domain (4) when I go here again, then again two fields a LOV (5), and the free text field must be filled in.

  To do this, I wrote the logic in the following way:

  (1) get the LOV box-1 value and deriving the new values and set the session Variable to 1 and then refresh the Page. Now in PR get the Variable from Session 1 and assigning new values to LOV fields 2 and 3 and then using the property Setdisabled I deactivation.

  (2) getting the value of LOV field-4 and then drifting two new values and set the session Variable-2 and refresh the Page. Now in PR get Session-2, and then set the new values for the LOV-5 field and free text. But once the Page Refreshed and assigning values, values that we have given in the Point 1 in the LOV-2 fields, 3 turn white and field's get activated.

  Can you please let me how to achieve this? and also why the values are empty when I implement Point-2.

  Thank you
  Clarriiza

  Clarriiza,

  This VO have no matter what right SQL query, so even if you run the VO by using vo.executeQuery (), you will not get all the lines in the VO.

  So in the PR you need createRow and insert VO (otherwise your page no mistake) the below blog can be considered as an example.

  Reference: Oracle tips of Johny: OAF: how to create a PVO and use for Spel link in Oracle Application Framework

  On top of which is explained in the blog above, you set the values for the attributes of the useful, likely to set the value for the other LOV.

  I hope this helps.

  See you soon

  AJ

• Calculate the value based on the selection of the checkbox

  People from g ' Day,.

  I have myself a little stuck on a job that I have here, this javascript Gets the better of me.

  The idea is that this script takes the total sub and adds a surcharge for credit card (in percentage) based on a selection of the checkbox, then spit out the value to be entered in another field.

  If someone could have a quick look over what follows and let me know where I went wrong, it would be appreciated.

  ---

  Subtotal var = this.getField("SubTotal").value;

  var mastercardTick = this.getField ("MasterCard");

  var visaTick = this.getField ("Visa");

  var amexTick = this.getField ("Amex");

  Var extra = this.getField("CreditSurcharge").value;

  card credit var = this.getField("PayCredit").value;

  If (creditcard.value = 'Off') {}

  Event.Value = 0;

  } else {}

  If (mastercardTick.value = 'Yes') {}

  overload. Value = (1,2 / 100) * subtotal.value;

  } ElseIf (visaTick.value = 'Yes') {}

  overload. Value = (1,2 / 100) * subtotal.value;

  } ElseIf (amexTick.value = 'Yes') {}

  overload. Value = (3.75 / 100) * subtotal.value;

  } else {}

  Event.Value = 0;

  }

  }

  ---

  For lines like these:

  overload. Value = (1,2 / 100) * subtotal.value;

  If it should not be as:

  Event.Value = (1,2 / 100) * subtotal.value;

  The variable supplement is defined at the beginning of the script to the value of the field, so the surcharge.value parameter is not any sense.

• Get the old value and the new value based on the date

  Hello
  
  I have a table called list created below with the rest of the insert statements.
  
  CREATE TABLE ROSTER
  (
  NUMBER OF ROSTER_EMPLOYEE_DEF_ID
  NUMBER OF EMPLOYE_ID
  NUMBER OF DEFINITION_REGION_CODE
  NUMBER OF DEFINITION_DISTRICT_CODE
  NUMBER OF DEFINITION_TERRITORY_CODE
  START_DATE DATE,
  END_DATE DATE
  )
  
  
  
  INSERT IN THE LIST
  (ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
  VALUES
  (1,299,222,333,444, 'JUNE 1, 2011', 30 JUNE 2011 "")
  
  INSERT IN THE LIST
  (ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
  VALUES
  (2,299,223,334,445, "1 JULY 2011', JULY 20, 2011" "")
  
  INSERT IN THE LIST
  (ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
  VALUES
  (3,299,224,335,446, 'AUGUST 1, 2011', AUGUST 30, 2011 "")
  
  INSERT IN THE LIST
  (ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
  VALUES
  (4,300,500,400,300, 'JUNE 1, 2011', JUNE 20, 2011 "")
  
  INSERT IN THE LIST
  (ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
  VALUES
  (5,300,501,401,301, "1 JULY 2011', JULY 20, 2011" "")
  
  
  In the table above we have columns like
  
  EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE
  
  The result I'm looking for the table above is based on the employe_id OF start_date AND end_date
  
  I need to get the OLD_DEFINITION_REGION_CODE and the NEW_DEFINITION_CODE
  Similarly, OLD_DEFINITION_REGION_CODE and the NEW_DEFINITION_REGION_CODE
  and OLD_DEFINITION_TERRITORY_CODE and the NEW_DEFINITION_TERRITORY_CODE
  
  
  I need to get a row of data for each employee saying old value and the new value
  
  for the employee 299 there are 3 records he puts the new record which is the latest date is to say beginning August 1, 2011 and end date of recordings old 30 August 2011
  beginning July 1, 2011 and July 20, 2011
  
  
  For the data in the table above, I need to get the data as below
  
  
  EMPLOYE_ID OLD_DEFINITION_REGION_CODE NEW_DEFINITION_CODE OLD_DEFINITION_REGION_CODE NEW_DEFINITION_REGION_CODE START_DATE END_DATE
  299 223 224 334 335 20 JULY 11 30 AUG 11
  300 500 501 400 401 20 JUNE 11 JULY 20, 11
  
  
  Please suggest me to get the result above, based on the data. Please let me know if my messages are not clear
  
  
  Thank you
  Sudhir

  SELECT  EMPLOYEE_ID,
          OLD_DEFINITION_REGION_CODE,
          NEW_DEFINITION_REGION_CODE,
          OLD_DEFINITION_DISTRICT_CODE,
          NEW_DEFINITION_DISTRICT_CODE,
          OLD_DEFINITION_TERRITORY_CODE,
          NEW_DEFINITION_TERRITORY_CODE,
          START_DATE,
          END_DATE
    FROM  (
           SELECT  EMPLOYEE_ID,
                   ROW_NUMBER() OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE DESC) RN,
                   LAG(DEFINITION_REGION_CODE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) OLD_DEFINITION_REGION_CODE,
                   DEFINITION_REGION_CODE NEW_DEFINITION_REGION_CODE,
                   LAG(DEFINITION_DISTRICT_CODE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) OLD_DEFINITION_DISTRICT_CODE,
                   DEFINITION_DISTRICT_CODE NEW_DEFINITION_DISTRICT_CODE,
                   LAG(DEFINITION_TERRITORY_CODE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) OLD_DEFINITION_TERRITORY_CODE,
                   DEFINITION_TERRITORY_CODE NEW_DEFINITION_TERRITORY_CODE,
                   LAG(END_DATE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) START_DATE,
                   END_DATE
             FROM  ROSTER
          )
    WHERE RN = 1
  /
  
  EMPLOYEE_ID OLD_DEFINITION_REGION_CODE NEW_DEFINITION_REGION_CODE OLD_DEFINITION_DISTRICT_CODE NEW_DEFINITION_DISTRICT_CODE OLD_DEFINITION_TERRITORY_CODE NEW_DEFINITION_TERRITORY_CODE START_DAT END_DATE
  ----------- -------------------------- -------------------------- ---------------------------- ---------------------------- ----------------------------- ----------------------------- --------- ---------
          299                        223                        224                          334                          335                           445                           446 20-JUL-11 30-AUG-11
          300                        500                        501                          400                          401                           300                           301 20-JUN-11 20-JUL-11
  
  SQL>  
  

  SY.

• How to get the values based on the most recent date

  Oracle Version 8i
  
  
  
  How to get the new_value based on the most recent date
  
  SELECT max (MODIFIED_ON), the Group LOG_ITEM_CHARACTERISTICS by MODIFIED_ON new_value - does not
  
  Please, someone help me
  

  CREATE TABLE LOG_ITEM_CHARACTERISTICS
  (
    CHAR_LOG_ID          NUMBER(10)               NOT NULL,
    PIRM_ID              VARCHAR2(8)              NOT NULL,
    CONSTANT_FLAG        VARCHAR2(1),
    CHARACTERISTIC_NAME  VARCHAR2(25)             NOT NULL,
    TYPE_NAME            VARCHAR2(10)             NOT NULL,
    NEW_VALUE            VARCHAR2(3000),
    UOM                  VARCHAR2(10),
    MODIFIED_BY          VARCHAR2(30),
    MODIFIED_ON          DATE
  )
  
  SET DEFINE OFF;
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (187376, '0307490N', 'N', 'OUTPUT CURRENT', 'PS2030/WVL', '1', 'AMPS', 'EMPXD88', TO_DATE('10/25/1999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (187377, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '54.9', 'VOLTS', 'EMPXD88', TO_DATE('09/22/1998 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (187378, '0307490N', 'N', 'OUTPUT CURRENT', 'PS2030/WVL', '0', 'AMPS', 'EMDXB88', TO_DATE('09/22/1998 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (187384, '0307490N', 'N', 'OUTPUT CURRENT', 'PS2030/WVL', '2', 'AMPS', 'EMAXC29', TO_DATE('11/10/2000 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (187385, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '55.1', 'VOLTS', 'EMAXC29', TO_DATE('10/19/2001 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_ON)
   Values
     (2400742, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '2', 'AMPS', TO_DATE('10/19/2001 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (574093, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '2', 'AMPS', 'EMCTH88', TO_DATE('12/13/2002 11:55:16', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (574094, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '54.9', 'VOLTS', 'EMCTH88', TO_DATE('12/13/2002 11:55:16', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (3131486, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '6', 'AMPS', 'EMCTH88', TO_DATE('12/16/2004 14:31:14', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (3131487, '0307490N', 'N', 'LAST MEASURED DATE', 'PS2030/WVL', '16-12-04', 'DD/MM/YY', 'EMCTH88', TO_DATE('12/16/2004 14:31:14', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (3131488, '0307490N', 'Y', 'POWER SUPPLY', 'PS2030/WVL', 'ESSENTIAL', 'EMCTH88', TO_DATE('12/16/2004 14:31:14', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (3131489, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '54.9', 'VOLTS', 'EMCTH88', TO_DATE('12/16/2004 14:31:14', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (4759086, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '6', 'AMPS', 'EMRCT88', TO_DATE('11/15/2007 14:33:03', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (4759087, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '54.9', 'VOLTS', 'EMRCT88', TO_DATE('11/15/2007 14:33:03', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (4759088, '0307490N', 'N', 'LAST MEASURED DATE', 'PS2030/WVL', '14/11/07', 'DD/MM/YY', 'EMRCT88', TO_DATE('11/15/2007 14:33:03', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646012, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '5', 'AMPS', 'PAUL DEVERILL', TO_DATE('01/06/2011 12:56:17', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646013, '0307490N', 'Y', 'BATT TEST SET AT 3M', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 12:56:17', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646014, '0307490N', 'Y', 'CAP ALARM INHIBITED', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 12:56:17', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646015, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '55', 'VOLTS', 'PAUL DEVERILL', TO_DATE('01/06/2011 12:56:17', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646016, '0307490N', 'Y', 'YR ROUTINES REQUIRED', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 12:56:17', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646057, '0307490N', 'Y', 'BATT TEST SET AT 3M', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 13:03:18', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646058, '0307490N', 'Y', 'CAP ALARM INHIBITED', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 13:03:18', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646059, '0307490N', 'Y', 'YR ROUTINES REQUIRED', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 13:03:18', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (6648577, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '6', 'AMPS', 'EMPXD88', TO_DATE('01/07/2011 13:35:45', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (6648578, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '55', 'VOLTS', 'EMPXD88', TO_DATE('01/07/2011 13:35:45', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6648579, '0307490N', 'Y', 'YR ROUTINES REQUIRED', 'PS2030/WVL', 'NULL', 'EMPXD88', TO_DATE('01/07/2011 13:35:45', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6648580, '0307490N', 'Y', 'BATT TEST SET AT 3M', 'PS2030/WVL', 'NULL', 'EMPXD88', TO_DATE('01/07/2011 13:36:00', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6648581, '0307490N', 'Y', 'CAP ALARM INHIBITED', 'PS2030/WVL', 'NULL', 'EMPXD88', TO_DATE('01/07/2011 13:36:10', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (6648634, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '5', 'AMPS', 'EMPXD88', TO_DATE('01/07/2011 13:51:06', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (6648635, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '55', 'VOLTS', 'EMPXD88', TO_DATE('01/07/2011 13:51:06', 'MM/DD/YYYY HH24:MI:SS'));
  COMMIT;

  user4587979 wrote:
  Hi Frank

  Yes, but I had more than 2 tables with item_characteristics, type_characteristics

  If there are other tables involved, then CREATE TABLE and INSERT statements for them (for the relevant columns only). You must not post a lot of examples of data; usually just a couple of lines per table is enough to show the problem.
  Also post the results desired from these data.

  What I try to do is, I'm comparing new_value in log_item_characteristics (whichever is most recent) with CHR_VALUE in the item_characteristics and the needs of different output values

  I am trying to query is not giving desired out put

  Point out some places where the output is wrong and explain how you get good results in these places, using specific examples from the data sample.

  select  lic.PIRM_ID, ic.CHR_ID, lic.CHARACTERISTIC_NAME,
  lic.TYPE_NAME, ic.CHR_VALUE, lic.NEW_VALUE,  lic.MODIFIED_BY,  lic.MODIFIED_ON,
  ic.CREATED_BY, ic.CREATED_ON,ic.MODIFIED_BY, ic.MODIFIED_ON
  from log_item_characteristics lic, item_characteristics ic,type_characteristics tc  where
  lic.TYPE_NAME=tc.TYPE_NAME
  and lic.CHARACTERISTIC_NAME=tc.CHR_NAME
  and lic.PIRM_ID=ic.PIRM_ID
  and tc.CHR_ID=ic.CHR_ID and ic.CHR_VALUE <> lic.NEW_VALUE
  and lic.pirm_id in ('0307490N','0307521C')
  order by lic.pirm_id
  

  Thank you; It is useful to see the existing query. Really, you have to format your code.

  Please can you help me

  What you've posted so far is like saying "I'm going 200 meters to the North, and then 500 meters East, but I'm not getting where I want to go." I would have a better chance to help you if you said, 'I'm out of my house, at 100, Elm Street and try to get to the supermarket at Broadway 279. I'm going 200 meters to the North... ', or, even better. "I want to buy a newspaper and some orange juice, so I thought I'd go to a convenience store. I start at my house, at 100, Elm Street... »
  Always post some examples of data (CREATE TABLE and INSERT statements, as you did in your first post) and the desired results from these data. Explain how you get these results from these data.

• Compare the report not showing the changes

  I modified an app engine select commenting on a line. I then did a report compares against a database that do not have the code

  

  The comparison report shows no difference between the two DB

  What Miss me?

  

  If you change only the SQL, then you need compare SQL objects. The report you are looking at is only for the engine program of Application objects. This will only show the changes made to the program properties (things like the records of State or temporary tables, attached to the program).

  Another report will show the changes for Application Sections of the engine, which would include things like the addition of new sections, adding or removing a step of a section or changing the properties of a step or a section.

  Also, to see changes made to the Application Engine PeopleCode, you'd have to glance at the Application Engine PeopleCode compare report (note that peoplecode types are detailed in separate reports, but all the SQL types appear in the same report).

  Kind regards

  Bob

• How to create a dependent list of values based on the relationship master detail

  Hello

  I'm on jdev 11.1.2.4.

  1. I have a table main 'Reception' with the columns receipt_id and student_id (ReceiptVO)

  2. as well as an array of details 'Receipt_Detail' with the columns receipt_id, course_id (ReceiptDetailVO)

  (There are some othere columns in the two tables, but I've only mentioned those which is relevant to this example.)

  3. the two tables are related with receipt_id.

  I want to create a dependent class LOV that filter courses related to the student selected in the main table. (There is a student_course table that holds student_id, relationship of course_id, StudentCourseVO)

  to do this, I have

  1 created VO based on the student_course table

  2 Add a view that filters based on the id of the student

  3 assigned this VO to receipt_detail tables course_id

  It comes

  in the accessor receipt_details VO view, I do not show the ability to select the student_id of the main table (IE ReceiptVO). It only shows the columns in the ReceiptDetailVO.

  Please can you help me?

  Thank you

  What you need in your ReceiptDetailVO is the StudentId of master ReceiptVO attribute.

  To do this, you can:

  1. for your ViewLink (between ReceiptVO and ReceiptDetailVO), you must generate the Source accessor:

  

  In this way, in the VoRowImpl Java to ReceiptDetailVO class, you will get a way to access master ReceiptVO line (you can find a new method with the name that you gave the name of the accessor in the top of the dialog box)

  2. then, in the ReceiptDetailVO, create Transient attribute, say, MasterStudentId. Access Java's VORowImpl class, within the get for this new attribute accessor method, use the previous step name accessor method to get the line main and finally master StudentId.

  3. the rest is easy - use this new attribute transitional to filter LOV about the student teacher ID...

• Hide a field value based on the value of the previous row

  I need to read the string before the underscore (_) and show that the value in the 1st row for the field of Value1. For example, if the previous string (ABCDE) is equal to that of the second line I need to hide the value (100) on the field of the value1.

  Sample data:

  Report ID	Val1	Val2	Val3
  ABCDE_01	100	200	300
  ABCDE_02	100	250	350
  XYZ	500	60	28

  Final results:

  Report ID	Value1	Value2	Value3
  ABCDE_01	100	200	300
  ABCDE_02		250	350
  XYZ	500	60	28

  I am using code below but error.

  <? If: xdoxslt:get_variable($_XDOCTX,_'x')! = substr (REPORT_ID, 0, instr(REPORT_ID, '_', 0) - 1)? >

  <? Value1? >

  <? end if? >

  <? xdoxslt:set_variable ($_XDOCTX, 'x', substr (REPORT_ID, 0, (instr(REPORT_ID, '_', 0)-1)))? >

  You can use this condition instead:

  It will manage both of your cases.

• Additional mouse click required to set other combo box values based on the current selection combo box

  I have an Acrobat PDF form where there are 8 combo boxes (not editable) which are related in a logical way, but have unique names and a list of unique values, with the exception of a default value that represents 'null' or 'none '.

  for example:

  The first 1 combo box value is "none" followed by the value A1, B1, C1, etc., and Combo box 2 the first value is 'none' followed of the values A2, B2, C2, etc...

  The combined list useful values for every combo boxes relate to the types of unique product for the user to select mode 'radio button '.

  When the user selects one of the 8 Combo boxes and performs one selection other than 'none', then the form must verify the 7 other combo boxes and when any current value is not equal to 'none', he has to change 'None '.

  The following script is currently enrolled in the properties of "Actions - Mouse Run - Up a Javascript" from one of the drop-down list boxes, others have similar scripts as well.

  (var cbox is the current combo box and var obox is for other drop-down list boxes when called).

  Cbox var = this.getField ("TagStyleStake");

  If (cbox.value! = "none")

  {

  obox var = this.getField ("TagStyleBasket");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStylePushon");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStyleHandle");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStyleHang");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStyleBlank");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStyleMolded");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStyleSignage");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  }

  The current problem is that, when a Combo is selected and one option other than the 'none' value is clicked, the other combo boxes do not include the 'None' value.

  To reset the other combo boxes requires another click on the option which has just been moved to the position selected in the drop-down list, but it seems reasonable that the drop-down list boxes should reset with the initial click the option in the drop-down list.

  I tried other properties (Format, validate, Calculate) but without success.

  What I'm missing here?

  The normal way to proceed is to define "value option selected to validate immediately" and to place the code in the event of the combo box button. And instead of the first two lines you have, you need to use something like:

  If (! event.willCommit & event.changeEx! == 'none') {}

  Your other code goes here

  }

  The changeEx property returns the value of exports, if any, for the selected item.

• LOV display value based on the locale change

  Hi all
  I have this problem:
  my application is supposed to support two languages, English and another language.
  the user can change the regional settings by pressing a command link in their browser and switch between these two regions.
  all messages and labels are converted correctly.
  
  but in my case I use several objects in display list of choice as a data source for my LOV.
  for example, the views contain three columns:
  1 - id: which is the return value
  2 - English_meaning: description in English
  3 - Another_language_meaning: description in another language.
  
  is it possible to change the value displayed in LOV based on locale
  (i.e. If the user choose English locale English_meaning column will appear on LOV and when it goes to non_English_locale, the Another_language_meaning column is displayed)
  
  any help please.

  Maybe you find this post useful
  http://adfpractice-Fedor.blogspot.com/2011/02/ADF-BC-multiple-lovs-for-Vos-attribute.html