Comparison of two values Datetime, but only the part of everyone's schedule
Hello. I have two Datetime objects on my form. Both are formatted and only display the HH:MIPM. I have a validation requirement where I have to check if: TimeA is higher (: TimeB - 30 minutes). What would be the best way to build an IF condition allows to assess both these Datetime variables and determines if the time portion to: TimeA is greater than the time portion of: TimeB - 30 minutes? The part 'date' Datetime value should not be taken into account in the comparison.Any help would be greatly appreciated.
Published by: Buechler on April 13, 2010 10:43
If you really want to ignore the date and to assess the time, I would like to convert it each date to CHAR formatted as time column and convert it back dated to essentially match the date part. You can then perform a calculation of standard date to get the time difference and check if the difference is more than 30 minutes. For example:
DECLARE
TIME_B DATE := To_Date(To_Char(:DATA_BLOCK.TIME_B,'HH24:MI:SS'),'HH24:MI:SS');
TIME_A DATE := To_Date(To_Char(:DATA_BLOCK.TIME_A,'HH24:MI:SS'),'HH24:MI:SS');
BEGIN
IF ( ABS(TIME_B - TIME_A) > .021 ) THEN
/* If you divide 30/1440 you get the numeric equivilent of 30 minutes. (.021) */
-- Differnece is greater than 30 minutes!
-- Do Something Here....
ELSE
-- Difference is LESS than 30 minutes!
-- Do Something here....
END IF;
END;
I hope this helps.
Craig...
Tags: Oracle Development
Similar Questions
-
I had two apple ID, but only now have access to one of the e-mails. When I try to login, it differs on the account that I no longer have access to. How can I change my information to my * account?
< email published by host >
As you know that these are user forums, it is not a good idea to post your e-mail address on a public forum - I asked the host to remove it.
What "information" do you want to go? You can transfer iTunes downloads to another account, or to merge accounts - all downloads are permanently associated with the account that has downloaded (if only this account can potentially re-download purchases, downloads of updates of its applications, authorize such purchases on iTunes from the computer, and make in-app purchases in them).
-
I dropped my phone in a small bowl of water, but only the top wet! (Camera and side buttons)!
I dropped my phone in a small bowl of water, but only the top wet! (Camera and side buttons) but I caught as fast as I could and I put it in rice! The camera picture and everything work fine, but these last two days the phone has acted a bit! As it is a bit slow (which im hoping is just my access provider) and this morning I plugged my headphones, but they were not involved. It's as if they are not yet connected. Until I restarted my phone! All this may be water damage! Once again; the camera works very well and the buttons are too! I can take it to the Apple Store to watching it!
Is one of the newest phones. He should not have these problems. Water works in many ways where electrics are concerned, and few of them are to our advantage. Bring it to your local Apple store and ask for an assessment.
Guarantees exclude the water damage.
-
Sansung S3 using, Android 4.1.2 Firefox 24.0; not yet possible to share all the tabs opened (using NFC) with another phone NFC. But only the a main tab, I'm currently browsing is possible to share. It is the function of current NFC function of Firefox?
If so, when will it feature to share all the tabs?
Thank you.I don't know if we implement this. Sharing of all the tabs you have open have many security and privacy issues. Someone forget that they had a tab open, they didn't want to share or miss-clicks on the sharing of all the option.
We are looking for ways to better share tabs with devices that are located nearby. Especially if they are on the same WiFi network.
-
HP DVD Writer does not read or write DVD, but only the CD
My HP DVD 1135t burner does not read or write DVD but only the CD. What is the problem? Please help me.
CD/DVD players use different lasers for reading/writing DVD from the CD. All indications would point to your laser DVD as having failed. You could try to remove your drive and install it in another computer to see if the problem follows your player or your computer, but my bet is that the drive must be replaced.
HTH,
JW -
Hello
I bought Adobe Creative with new Adobe ID before that I have a trial version with a different Adobe ID facility. MIT purchased version ID does not appear to me, but only the ID old test I can't connect.
Help, please.
My English is not good come from Germany
Log, activation, or connection errors. CS5.5 and later versions
Mylenium
-
Have the disk for the Acrobat Pro disc. Installed, but only the trial opens
Have the disk for the Acrobat Pro disc. Installed, but only the trial opens
Hi clanhansen,
Please enter the serial number purchased in the trial version to activate the software.
To find the serial number, please visit: http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Kind regards
Rave
-
How to recreate the audio to an mp3 file, but only the melody without accompaniment.
Hello
Good day to all.
I'm new here, trying to assess CS6. I need to recreate the audio MP3, but only the melody without accompaniment. much the opposite of a karaoke file. I can this be done? There is a short tutorial on that?
N ° EC would be black magic. You will need to re-create the composition in a sequencing program, hire a band / Orchestra and record or other.
Mylenium
-
How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?
This has two questions:
1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.
2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.
3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.
Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.
The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.
Then there is the BootCamp partition on the HARD drive partition #2.
Is there a way to get what I need?
That is what has been described in this notice of two canoes?
Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3
Thank you.
After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.
Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.
A. take backup
1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.
B. fuse out of the merger in two physical disks drive: SSD + HDD
1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)
Cs diskutil list
2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive. Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,
diskutil cs deleteVolume Logical Volume ID
CS diskutil remove logical Volume Group ID
This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.
I hit this issue too. To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:
Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)
and repeat for disk1/dev/disk1 which is the HARD drive in my case).
This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.
2 create independent partitions (non-fusionend) for the installation of OSX.
Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".
3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".
C. install on the HARD disk as drive didier autonomous not fusion.
1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.
D. use BootCamp Yosemite f5 to install windows.
1. launch Yosemite bootcamp.
2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software. Do not click on the last box to install or remove windows pie creating real bootcamp partition again.
3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.
4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use. Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model). Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.
-From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.
-Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.
-Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.
5. open Boot Camp Assistant again and only select the third option, install Windows 7.
It will show you the screen to select what installation disk, select HARD drive.
Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.
For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.
Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio
6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.
7. once the installation is complete, check that windows is functioning correctly.
E. Si you want to upgrade to windows 10 Windows 7.
1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page. Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE. Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.
2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.
F. reinstall OSX El Capitan
Once your target windows system (if windows 7, windows 8 or windows 10) works very well. You can continue to create again your Fusion drive and reinstall OSX El Capitan.
1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.
2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.
3. on the selection screen, select start Yosemite OSX install drive.
4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.
5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.
6 type the 'diskutil list' command to list all disks and partitions.
The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.
The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.
G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc
1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.
2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.
3. on the selection screen, select start Yosemite OSX install drive.
4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.
5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.
Cs diskutil list
6. in the terminal, type commands to delete logical drives from basic storage. Note: All data will be destroyed in the logical drive.
diskutil cs deleteVolume Logical Volume ID
CS diskutil remove logical Volume Group ID
7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 121,3 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_HFS GB SSD 121.0 disk0s2
/ dev/disk1 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 3.0 to disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS 1.7 Untitled TB disk1s2
3: disk1s3 Apple_Boot Recovery 650.0 MB HD
4: Microsoft database BOOTCAMP 503.0 GB disk1s4
5: Apple_HFS 801,4 Untitled GB disk1s5
8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.
diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5
Note: Mark the group id of logical volume shown in the results.
In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.
So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2
9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.
diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%
10 command "diskutil cs type list" to check the resulting fusion drive created.
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E
=========================================================
Name: LVG
Status: online
Dimensions: 1815635525632 B (1.8 to)
Free space: 90112 B (90.1 KB)
|
+-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 120988852224 B (121.0 GB)
|
+-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E
| ----------------------------------------------------
| Index: 1
| Disc: disk1s2
| Status: online
| Dimensions: 1694646673408 B (1.7 to)
|
+--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9
----------------------------------------------------------
Encryption type: no
|
+--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10
---------------------------------------------------
Disc: disk2
Status: online
Size (Total): 1809780178944 B (1.8 to)
Reversible: no
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
LVG Type: Fusion, sparse
11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.
12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.
13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.
14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.
15. yet once please take personal responsibility on damage if you follow the instructions in this article.
-
How can I print only the part selected a page?
When I highlite prints part of the entire page. How can I print only the part selected page?
Try:
Highlite your text
Press CTRL + P to start the print menu
"All" is selected by default in the scope . Change it by selecting 'selection ', and then click OK.
This example shows only the text that is selected. Microsoft® Security MVP, 2004-2009
-
Can buy us the tariff COMMON in Hong KONG, but affects the part of the license users to Singapore?
We wonder if we can purchase licenses of the CTC in Hong KONG (via the HK company), but assign the part of licenses to our users of office of branch of Singapore and mainland China respectively? Thank you and press to get the answer!
Kind regards
Thomas
Hello
Please see Adobe Creative Cloud for teams FAQ
I hope this helps!
Kind regards
Sheena
-
Items purchased and it appears I have got only the part of editing photos and movies. How can I get part 2 of my order?
Please post related queries from Photoshop Elements
-
Retrieve only the part number of a varchar column using select
Hi all
I have the type of lines
GauravSer101
GauravSer104
GauravSer106
Gerard-Ser1789567
Approve-Ser1789456
in a table.
I need a select statement that returns only the part number associated with specified items, above, so my output should be like this
101
104
106
1789567
1789456
From this point, it is fixed as characters last few must include numbers. That is to say a finished element always at least one digit.
Can someone please indicate such a select statement?
I really need to sort items based on the part number are attached to them, not on the entire element.
Kind regards
Gerard3 order of rtrim (translate (lower (col1),'0123456789 ', ' 0000000000'), '0') / / desc
4, to_number (ltrim (translate (lower (col1), 'abcdefghijklmnopqrstuvwxyz',' @'), ' @')) CSA;I would avoid to enter whole alphabet:
SQL> select col1, 2 trim(translate(col1,'0123456789 ',' ')) alpha, 3 to_number(trim(translate(col1,translate(col1,'0123456789 ',' '), ' '))) num 4 from t 5 order by trim(translate(col1,'0123456789 ',' ')) desc, 6 to_number(trim(translate(col1,translate(col1,'0123456789 ',' '), ' '))) asc; COL1 ALPHA NUM -------------- -------------------------------------------------------- ---------- GauravSer100 GauravSer 100 GauravSer101 GauravSer 101 GauravSer102 GauravSer 102 GauravSer1000 GauravSer 1000 ApproveSer100 ApproveSer 100 ApproveSer101 ApproveSer 101 ApproveSer102 ApproveSer 102 ApproveSer1000 ApproveSer 1000 8 rows selected.Nicolas.
-
Two Dell computers, but only a reinstall OEM drive.
I have two Dell computers but I have only a single reinstall OEM drive. I'll try to find it on the computer on which it is intended, assuming that it can be used on only one of my two computers.
The drive is Win 7 Home Premium and boyh computers came with Win 7 Home Premium.
Thanks for the help.
The Dell DVD Windows 7 Home Premium resettlement can be used on any Dell computer that came with Windows 7 Home Premium.
-
So I have something very strange going on. I have a Dell custom host ISO on a Dell R310 ESX 5.5. My problem is that the Internet download is bad, but ONLY to other virtual machines. The Upload is normal physical computers.
I currently have 4 virtual machines running:
FreePBX, Win 2012 R2 Server, Sophos UTM (ISO VMware with the latest updates) and Win8.1 Ent.
I have the following physical machines, I also used for testing:
8.1 Win Office - wired
Win portable 8.1 - wireless
The lower test details, you can see on the image below.
Iperf tests with 64 k window:
Win Server 2012 to VM VM win 8 - 6.8Gbps <-VM VM good xfer
Wireless Win 8.1 laptop to Win 2012 VM Server - 172Mbps <-VM to the well physical wireless
Desktop 8.1 Win Win Server 2012 VM-619Mbps <-well wired VM
Xfinity speed tests:
Wireless laptop: 90Mbps down, 9Mbps place <-physical good Upload PC speed
Wired Desktop laptop: 90Mbps down, 9Mbps place <-physical good Upload PC speed
Win Server VM: 86Mbps down, place 0.6Mbps <-SLOW on VM!
Win 8 VM: 90Mbps downwards, upwards 0.6Mbps <-SLOW on VM!
As you can see in my tests, the only place the problem presented is VM to the internet. Physics to the internet works fine. My only thought is that there is something with the switch to the host or the MAC address.I don't think it's the Sophos Nic because it works very well from the physical to Sophos to Internet. I also have a ticket with Sophos Support; they look on the side of Sophos.
Thoughts?
I sent Wireshark packet capture of the Sophos support and they had this to say:
This is to inform you of the issue, you face the slow, ask you please see attached screenshot of the capture of packets. We have found the package wth ECN (explicit congestion Notification) and CWR (Congestion window reduced on the VM machine, please get this checked with support of virtual machine or VM adapter. This happens when he fell over packages and the congestion window is reduced, that the issue is not with the UTM.
In addition, indicator of Congestion window reduced (CWR) is defined by the host sender to indicate that it has received a segment TCP with the ECE flag set and that she had responded to the congestion control mechanism that indicates there is a congestion in the patch.
So I did some research and the solution is to disable all options of unloading in the advanced settings of the NIC as shown in these two links:
Cyber Explorer: Improved VM broadband network VM on an ESXi platform
Disable offloading TCP in Windows Server 2012 | Knowledge Center | Rackspace Hosting
This solved my problems. I now cross 9Mbps downloads on my VMs. hope this helps someone else!
Maybe you are looking for
-
Pavilion 15-p246sa: BIOS update successful but cannot now access the BIOS screen
The recommendation in HP Support Assistant I've just updated BIOS version f33, f34. This succeeded and the Pavilion starts normally. However when I try pressing ESC at startup key is ignored and the trunk. How to reactivate the computer to respond t
-
HP 2545: 2545 wireless printing hp support
Hi, I have a book ultra lenovo ideapad without CD ROM drive or external hard drive. When I joined the 2545 USB port it automatically connected printer. Now, I'm doing the wirless print function works. I know that I have to give the printer the wirles
-
Can not see the drive letter for Hammer 640 GB external hard drive
I have an external hammer 640 GB drive (which has a Western Digital WD6400AAKS drive inside) with important data. When I connect to my computer (under Windows XP Pro), I can see the player if I go to my computer-> hardware-> readers but can see any d
-
When I install windows xp on my computer it is stuck on the blue windows setup screen how to fix this?
-
I moved my HP Office Jet printer on my desktop and am not able to work with it now. Help me - what can I do to get it back on my list of printers Control Panel.