compatibility of 10.2 and 10.1

Hello

Is it possible to run applications built with SDK on devices with OS 10.1 10.2?

Thank you.

Yes and no.

I built my app in the 10.1 SDK but it works well on 10.0. Normally this would not be the case since I use a 10.1 feature (CustomPicker), but I had the time in designing a CustomControl that loads a QML file execution. If the device works 10.1 then a version of the QML file that uses CustomPicker is loaded, but if being run on 10.0 a different version of the QML file is loaded which replaces the CustomPicker with a container with a drop-down list and a slider to get the same functionality. For immediate release I build for 10.1, but test it on both a simulator of 10.1 and 10.0 to make sure that I have not used 10.2 functions which I've not realized with my little trick. In this way I enjoy 10.1 enhancements without blocking users who are stuck on OS 10.0.

That said, Momentics 10.2 does just this thing a little more difficult. Momentics 10.1 cares not what the target OS is on the Simulator or device, to which it is connected. If you create using a 10.1 software development kit and connect to a 10.0 Momentics Simulator will happily compile your application and try to run it on the device or the Simulator, where it will crash if you used 10.1 features that do not exist on 10.0. 10.2 Momentics knows however what OS version is on the target device or the Simulator and will not let you run or debug if target OS is lower that the SDK you build with. Needless to say that I find this annoying, especially since my Z10 is always on the 10.1, so I can't build for 10.2 even if I don't use all of the new features.

In any case, the result is that you can build for 10.2 and it will run on OS 10.1 as long as you do not use any type of control or new functions to 10.2. The web pages for each control type list he was introduced with the OS version. Develop your application with Momentics 10.2 If you like for its improved interface, using a simulator of 10.2. When you are ready to test on a 10.1 device, or Simulator launch Momentics 10.1 with a 10.2 installed SDK and use it to install on the device or the Simulator.

alexko wrote:

Hello

Is it possible to run applications built with SDK on devices with OS 10.1 10.2?

Thank you.

Tags: BlackBerry Developers

Similar Questions

  • Compatibility problem with Vista and iTunes

    I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

    When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

    Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

    Don't know where to direct this question if any help you could provide would be greatly appreciated.

    Thank you.

    Hello

    iTunes is compatible with Vista and there should not be any problem.
    Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
    If your laptop can not boot Vista correctly, then you should try the repair feature.

    Turn on the computer and press F8. Now you will see the advanced boot menu.
    Now, you have many choices.

    As a first step, you should try the option called: last good known Configuration (Advanced)

    If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

    If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

  • Problems of compatibility of Lightroom 6 and Windows 10.

    I used 6 Lightroom on a PC since August/15.  I recently bought a new PC running Windows 10. The PC is SOFTA.  I knew nothing of the trouble with Lightroom 6 since.  He won't move a photo in the module development (blue screen) and regularly stops working when you try to download files from photos. I've deleted and reinstalled several times, without modification.

    In desperation, I reinstalled Lightroom 5.  It works well, thank heaven.  There is a problem of basic compatibility between Lightroom 6 and 10 of Windows?  Should I seek to return to Windows 8?

    Hi Billb,

    If please install Lightroom 6 and follow the steps below:

    • Go to Lightroom > Preferences.
    • Also please go to preferences > Performance tab and uncheck the box "use graphics processor.
    • Restart Lightroom and see if it works.

    Also check him follow the link: Photoshop and Lightroom with Windows 10 compatibility

    Kind regards

    Tanuj

  • Why is the compatibility between interactive pdf and acrobat dc so bad?

    We used Indesign CC14 make interactive pdf with a lot of hyperlinks on the huge books. With the new Indesign CC15, all target links are wrong, the interactive pdf is ok on a desktop computer, but failed on Ipad and Iphone. There is no compatibility between adobe acrobat and adobe acrobat reader DC.

    Before an another upgrade to Indesign CC I want questions to be resolved on.

    Here's the reality: PDF readers on mobile, including those from Adobe, have limited support for interactive PDF.

    This is not new: I wrote about this for years and the situation has not changed:

    For the interactive PDFS, not all readers are equal. InDesignSecrets

    There are readers who support it, but you may have to pay for them. Try PDF Expert of Readdle (US $9.99).

    It has nothing to do in particular with the latest version of Acrobat DC. It is one of the many readers on iPad, iPhone and Android that do not support interactive PDF features. Some features will not work, some will not.

    That's why many of us are moving the fixed layout EPUB when we want to view interactivity or animation.

  • are there problems of compatibility with the V6 and Norton 360 as there were in the past?

    When I tried upgrading to a newer version, a number of my functions of Norton 360 would not work and I got a pop-up message indicating that there is some sort of compatibility issue. I got eventually back to V4.

    No there aren't any 'problems' with Norton. Norton has released a fix for compatibility for Firefox 6 last Tuesday, a few hours after Firefox 6 is out.

    http://community.Norton.com/T5/Norton-360/update-available-Firefox-6-0-compatibility-patch/TD-p/512484

  • Firefox has an option to display compatibility as IE 8 and 9?

    IE 8 and 9 beta have an option to force compatibility in the browser for web sites that use older technology. Firefox has the same option? If Yes, where is it?

    Firefox doesn't have an equivalent option.

    You can install an add-on that will pass to the rendering engine of IE for sites that do not display correctly in Firefox. He did this in IE open in a Firefox tab. There are a few versions of this module, IE Tab 2 and IE Tab Plus.

  • compatibility problems between DA2400ES and X930D?

    Purchasing a X930D, someone has already tried it with a DA2400ES and/or someone does know of any compatibility issues?

    Hi Zactly,

    You can connect to the TV X930D STR-DA2400ES receiver without any problem.

    There is no problem of compatibility between these products.

    Kind regards

    -Anthony

    If my post answered your question, please mark it as "accept as a Solution.

  • Quick VPN compatibility with Windows 7 and Windows 7 VPN configuration connection.

    Cisco VPN fast compatible with Windows 7 or not? I have studied several documents that claim their fix works, but not of that actually work. I do not understand how fast VPN installs without problem and connects all the way up to the "check network". Win7 must have some problems with the way it treats an echo request because non of the suggestions work online. It may also not be a problem of firewall because that when the firewall is off the same problem occurs.

    Another question the utility of VPN in Windows 7 will work with Cisco VPN routers? What are the requirements of compatibility or the settings to make it work?

    Any specific comments would be appreciated.

    Hey,.

    Thank you for visiting the Microsoft answers community site. The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

    For your reference:

    http://TechNet.Microsoft.com/en-us/network/bb545442

    http://TechNet.Microsoft.com/en-us/library/dd787668 (WS.10) .aspx

    Kind regards

    Savan - Microsoft technical support.

  • compatibility for windows 7 and the weather channel desktop application

    I tried to download the weather channel for my office application, but because I have windows 7, they are not compatible.  The Compatibility Wizard recommended I go to the XP version, but it did not work. While I tried to do it manually, when this does not work, I hit the Web, but apparently nobody had this problem but me.  This thing STINKS full compatibility!  Can anyone help?

    Hello

    What happens when you try to install the application by changing the level of compatibility to Windows XP mode? You receive an error message?

    Method 1: You can try to install the application at boot and check.

    Note: After installation, follow step 7 in the link provided to return the computer to a Normal startupmode.

    Method 2: You can try to install the app to re download the app again.

  • Compatibility of 9148 MDS and HP HBA.

    Hi all

    The it Department is considering changing some HBA cards to some of our servers. The manufacturer of HBA cards is HP

    AP770B - HP 82 b PCIe 8Gb FC Dual-Port HBA

    AJ763B - 82nd HP, two ports PCI-e 8Gb FC HBA

    QR559A - HP SN1000E 16 P 2 Gb FC HBA

    AJ764A - HP 82Q 8Gb Dual Port PCI - e HBA FC

    We have a MDS 9148 switch that will be connected to one of these HBA cards. The it Department asked me to tell them if one of the above cards is compatible with the CISCO MDS 9148 material. I've been looking for a pdf or a document on the compatibility matrix, but I have not found anything. The question is: "CISCO provides a datasheet on the compatibility between the MDS 9000 switches and HBA cards matrix?"

    Thanks in advance for your help.

    Fernando

    Disk storage interoperability matrix

    http://www.Cisco.com/en/us/docs/switches/Datacenter/MDS9000/interoperability/matrix/Matrix1.html

    See table 1-2

    Thank you

    Responsible Dan

    Cisco IDP data center

    Need help with implementation?

    http://www.Cisco.com/go/pdihelpdesk

  • Compatibility of Windows 8 and ACS ACR122u NFC player problem

    Compatibility issues with NFC ACR122u ACS player when running on Window8.  Application well on XP, Win7, vista work.

    I guess ACS must release a driver with an update of Windows8.
    If anyone has experienced the same problem relate to please.

    Hi Virginia,

    1. what exactly is the problem with the NFC reader?

    2. that you get an error message when you use the player?

    It seems that ACR122U NFC reader is compatible with Windows 8, and there are drivers for the device.

    For more information, see the links.

    http://www.ACS.com.hk/index.php?PID=product&ID=ACR122U

    http://www.ACS.com.hk/index.php?PID=drivers&ID=ACR122U

    For compatibility issues, see the link.

    Make the programs more compatible with this version of Windows

    You can also contact Technical Support ACS and check.

    Let us know the results. We will be happy to help you further.

  • Compatibility with 61 (USA) and 301 (UK)

    Hi, I purchased a 4500 envy to the United Kingdom and it uses print cartridges 61.  I live in Antigua and have friends who came to the United Kingdom but they cannot get 301 cartridges, they will work in my printer?  Have you read somewhere, you will need to contact HP to reset the printer?

    Thanks in advance for the help

    Looks like this query is resolved...

    http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/301-and-61-cartridge-compatability-DeskJet-3050-J610A-UK/m-p/3531733

  • VM Compatibility ESXi 5.1 and later bad (VM version 9) with the network

    I'm having and ESXi host with 10 VM, all connected to the same portgroup on the virtual switch. To allow THT, I created the last slots with 5.1 ESXi compatibility and later (VM version 9), where all the other machines have ESXi 4.x and later (VM 7).

    Now, I'm having the issue 2 machines with version 9 can talk to each other, and version 7 cannot talk to each other. It is not possible to make a ping to a version 7 virtual machine vm version 9 and vice versa.


    An idea, a re there known issues, something I did wrong? From what I saw that day was to be a major change in the networking between these versions.

    Any help welcomed verrrrrry!

    Thank you, Philippe



    OK, after spending a day debugging, convert machines front and rear, delete and remove the NETWORK card I was able to convince the administrator to restart the host ESX - problem solved!

  • Compatibility issues with CS2 and Windows 2000 XP? This is supposed to be THE OS ON CS2 FONCTIONNE_ it? Can anyone help - I really need my CS2 back! Thank you.

    Help! Years - SEVEN to be exact - I BOUGHT Adobe CS2 and widely used. Then, I was in an accident that took five years to recover from. After my recovery, I tried to return to the use of my Adobe products to see that Adobe is discouraging use of CS2 and because I HAVE a LICENSE and that was the LAST version, I used I wanted to start with a version that I know. Several months later, apparently I wasn't the only one who wanted to CONTINUE to USE CS2 and now Adobe has made it possible to download this version for PC and MAC, BUT because of operating system compatibility issues, Adobe continues to discourage the download and use. HERE's THE THING: I have the SAME SYSTEM running the SAME operating system as when I BOUGHT it first. I downloaded the SAME EXACT VERSION of CS2. He moved very well. But I can't OPEN the app and the Troubleshoot utility of the reports that there is "COMPATIBILITY ISSUES". WHY?!?!?!?!?

    I'm on a PC running Windows 2000, XP. I OWN a LICENSE for Adobe CS2 and it allows to launch on this same machine. I had to reformat my system two years ago, so it has much more space, but when I try to OPEN the application, it won't work. When I run the troubleshooter in Windows it indicates system compatibility problems? Can someone tell me what to try now? Thank you.

    Did you download and install the special version of CS2?  It's the only one, you will be able to use.

    Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 -.

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  • Is there compatibility between InDesign CC and CC InDesign educational problems?

    I have a subscription to creative cloud and have updated all possible applications requiring an update.

    My version of InDesign is currently 9.2.2. I got a teaching InDesign from a creative cloud user file and when I try to open the file "created with a version more recent 10.0 ' I had thought of all the subscriptions of CC were equal and provide the latest version."

    Are there know educational between CC and CC compatibility problems?

    CC2014 is a new application that you will need to download and install.

  • Browser compatibility issues: Table wide and glitter animation autoscroll

    Hi guys

    I just uploaded a site in BRUTE form, just so that I have an example to show you. I'll probably take it down once I have a solution. I tested it on IE and chrome, the two latest versions (I think)

    The site is: www.jpmediaonline.co.uk

    OK, I have 2 questions, both are specific browser

    1. the table in the accommodation section is much wider in IE than chrome. It is intended to be displayed in the width, is it in Chrome.

    2. I use a JSquery to autoscroll and animate between sections. It's perfect on IE, but apparently on chrome Jutters / glitch / flicker... it seems to happen just as the accommodation section is about to pass.

    Hope I can get help to these two questions.

    Thank you!

    While your DIV class to "hostingtable" has a "width" defined for it, your table in itself is not.

    Add a "width" tag to your class 'table1' and set it to your desired width. IE will read the width of the table and show exactly that much.

    About the scrolling of the page, I don't see any glitch / twinkle / Jutters. Even if you see it, I suspect something to be with the settings of your video card that Chrome is programmed for. This should not be a cause for concern as a "browser compatibility".

Maybe you are looking for