Compile flexfield data in the tables of AOL.

Similar Questions

• Read xls file and display the data in the table.

  Hello

  Try to read the data from an xls or csv file and fill the same data in the table. If I need to use the table to store the data from the file and display, hoping that someone could help.

  Thank you

  Hari

  Hi hari,.

  One thing that is very important when you use the Excel activeX interface (in case you need it) is good termination of worksheet/workbook/lettering handles.

  You need these handles to specify what cell in which file you are trying to access.

  If you are unable to throw each handle you have, then you will be left with ghost Excel process in your task manager, devours your system's memory.

  Thus, when debugging of your application, open the Task Manager and the watch as Excel treats created/destroyed and make sure that you end up with zero Excel process running when your application is closed.

  Also consider the case of fault for your program. Check that your exit routes did not omit any termination of handle.

• How can insert different types of data in the table?

  Hello
  How can I insert different types of data in the table, (e.g., numeric and string) in the same index of a table.

  example:
  index0 car 10 green

  car red 11 index1
  Index2 car Blue 12

  where green car red and blue car as string and 10, 11 and 12 in the numeric form.
  then I extracted 10, 11 and 12 a digital table

  and, the green car, red car, blue car in a string array

  Help!

  Use 'Analysis of the chain' as in the picture as an attachment.  This will extract the number and color that you can add tables later.

• problem with the storage of the data in the table

  Hello

  I'm having the problem on the storage of data in the table. My problem is that whenever he makes a loop, the table just keep replacing them rather save to the next index. At 0, the value is 123, and 1 is 234. But I saw that all the data capture all crush to 0 until the last data see the 0. How can I fix this problem?

  
  

• How to add data to the table changed in sql developer at Apex and vice versa

  Hello

  I had tables of database with sql developer. But now, I have modified the database (new tables added + changed the data in the tables). However, in the Apex, I the old database. Is it possible to get the new Apex database with the data of the table changed so this database in both places (sql and apex developer) is exactly the same... Also the other way around.

  Thank you

  The database schema that contains the tables, is it associated with the workspace even you are searching through the APEX product t development?  Why I'm asking is, if they are the same schema, the tables that you MODIFIED should be appear in the sql for APEX workshop part.  Now reports and forms will NOT see the changes (unless you have actually added or updated definitions for column).

  Can you explain what exactly you were doing the SQL Developer to the tables in your schema?

  Thank you

  Tony Miller
  Los Alamos, NM

• How to add data to the table using Manager POST for restful Apex application

  Hi all

  I managed to create a service application web Manager restful using GET for the Restful service module. I am able to get the data in row on the presentation of a table row id in the application. But I can't find an appropriate example, how the new data in the table can be posted or deleted. I created a POST handler for a URI scheme and look forward on how to proceed. Any help would be really appreciated.

  Source for the POST Manager:

  Start

  insert into ALL_BOOKS values(:id,:book);

  end;

  Also created 2 parameters id and the book.

  Hi jerry2134,

  jerry2134 wrote:

  I managed to create a service application web Manager restful using GET for the Restful service module. I am able to get the data in row on the presentation of a table row id in the application. But I can't find an appropriate example, how the new data in the table can be posted or deleted. I created a POST handler for a URI scheme and look forward on how to proceed. Any help would be really appreciated.

  Source for the POST Manager:

  Start

  insert into ALL_BOOKS values(:id,:book);

  end;

  Also created 2 parameters id and the book.

  Check out the following tutorials OBE, that explains the creation of GET and POST RESTful Web Services and how to use them in the APEX.

  • Creation and use of RESTful Web application services Express 4.2
  • Creation and use of RESTful Web application services Express 5.0

  Also what yo mean "looking forward on how to proceed? Do you want to or created for use/consume in your Oracle APEX application hosted RESTful web services?

  If Yes, in your Application, you must create a RESTful Web Service reference -> shared components. Then, create a form/report based on Web Service reference.

  Kind regards

  Kiran

• FDMEE error data import: No. periods have been identified for the loading of the data in the table "AIF_EBS_GL_BALANCES_STG".

  Hi experts,

  I tried to load the data of EBS in HFM via FDMEE.

  Importing data in the rule of loading, I have encountered an error in loading.

  2014-11-21 06:09:18, 601 INFO [AIF]: beginning of the process FDMEE, process ID: 268

  2014-11-21 06:09:18, 601 [AIF] INFO: recording of the FDMEE level: 4

  2014-11-21 06:09:18, 601 [AIF] INFO: FDMEE log file: D:\fdmee\outbox\logs\TESTING_268.log

  2014-11-21 06:09:18, 601 [AIF] INFO: user: admin

  2014-11-21 06:09:18, 601 INFO [AIF]: place: Testing_loc (Partitionkey:3)

  2014-11-21 06:09:18, 601 [AIF] INFO: name: OCT period (period key: 31/10/14 12:00 AM)

  2014-11-21 06:09:18, 601 INFO [AIF]: name of the category: real (category key: 1).

  2014-11-21 06:09:18, 601 INFO [AIF]: name rule: Testing_dlr (rule ID:8)

  2014-11-21 06:09:19, 877 [AIF] INFO: Jython Version: 2.5.1 (Release_2_5_1:6813, September 26 2009, 13:47:54)

  [JRockit (R) Oracle (Oracle Corporation)]

  2014-11-21 06:09:19, 877 INFO [AIF]: Java platform: java1.6.0_37

  2014-11-21 06:09:19, 877 INFO [AIF]: connect the file encoding: UTF-8

  2014-11-21 06:09:21, 368 [AIF] INFO: - START IMPORT STEP -

  2014-11-21 06:09:24, 544 FATAL [AIF]: error in CommData.insertImportProcessDetailsTraceback (most recent call last): File '< string >", line 2672, in insertImportProcessDetail

  RuntimeError: No periods have been identified for the loading of the data in the table 'AIF_EBS_GL_BALANCES_STG'.

  2014-11-21 06:09:24, 748 FATAL [AIF]: load balances data launch GL error

  2014-11-21 06:09:24, 752 [AIF] INFO: end process FDMEE, process ID: 268

  I found a post related to this error, but did not respond.

  I know I'm missing something, gurus please help me to overcome this error.

  ~ Thank you

  I managed to overcome this problem,

  This was caused due to an error in the map of the time.

  In the mapping of source, the name of period should be defined exactly as displayed in the EBS.

  for example: {EBS--> OCT - 14} FDMEE {mapping source--> OCT - 14}

  The names of the time must be identical.

• delete the data in the table

  Hello

  Search page, I developed with two buttons, go and clear.and data sought are displayed in the table on the page.

  using the 'clear' button I can able to clear data from text boxes, but I want to data displayed in the table on the page must also be clear.

  Please provide assistance to achieve this.

  and iam also getting a problem more clearly by clicking the button twice, the first time it is deletion of the data, where, like the second time, it's

  What gives exception.how to prevent null pointer is not to get a null pointer exception.

  Hello

  in, click clear, you want data from the table are evacuated, do you want to text boxes to clear snow?

  You can achieve this by extending the controller and clear data that VO, so to clear the table.

  1 handle the button click clear

  If (oapagecontext. GetParameter("ClearBtn")! = null)

  2 claire VO associated table

  SVO OAViewObject = (OAViewObject) am.findViewObject ("yourVO"););

  svo.setWhereClause ("1 = 2");

  svo.executeQuery ();

  3. If you want to clear the text boxes you can use following code

  OAMessageTextInputBean mtib = (OAMessageTextInputBean) webBean.findIndexedChildRecursive ("bean_id");

  if(MTIB!=null)

  mtib.setValue (pageContext, null);

• Button insert data to the table

  Hello

  I use APEX 4.2.3 with XE, I try to insert data into the table using code below but nothing happen when I press the button, create this button like 'create a button to point to page'-> 'dynamic action'-> 'run pl/sql '.

  begin
  insert into dummy values('xx');
  commit;
  end;
  
  

  So to clarify, you have

  (1) created a button that "action" is "defined by the dynamic action.

  (2) created a dynamic action that executes pl/sql at the click on the button and you are pl/sql?

• How to export data from the table with the colouring of cells according to value.

  Hi all

  I use jdeveloper 11.1.1.6

  I want to export data from the table with a lot of formatting. as for color cells based on value and so much. How to do this?

  You can find us apache POI-http://poi.apache.org/

  See this http://www.techartifact.com/blogs/2013/08/generate-excel-file-in-oracle-adf-using-apache-poi.html

• Is it possible to see/get the data from the table to a dump file

  I have files dmp generated using expdp on oracle 11 g...

  expdp_schemas_18MAY2013_1.dmp

  expdp_schemas_18MAY2013_2.dmp

  expdp_schemas_18MAY2013_3.dmp

  Can I use a settings file given below to get the data from the table in the file sql or impdp the only option to load the data of table in database.

  VI test1.par

  USERID = "/ as sysdba".

  DIRECTORY = DATA

  dumpfile=expdp_schemas_18MAY2013%S.dmp

  SCHEMAS = USER1, USER2

  LOGFILE = user_dump_data.log

  SQLFILE = user_dump_data. SQL

  and impdp parfile = test1.par.

  No,

  DataPump cannot retrieve a dumpfile data in a flat file.

  Dean

• Choose the date of the table

  Hello
  
  It comes to my table
  

  CREATE TABLE TEMP_LEAP
    (
      "DATE_FROM" DATE
    )

  Insertion of the data in it with the procedure which takes 2 parameters of date format:
  

  CREATE OR REPLACE
  PROCEDURE  "T_PROC" (p_dat_from date, p_dat_to date) IS
  BEGIN
  
  
  DECLARE
  
    day       number     := 0;
    st           NUMBER := 0;
  
  BEGIN
  
  day := p_dat_to+1 - p_dat_from; 
  
  for p in 1 .. day     
             
  loop   
                  
     insert into temp_leapp (date_from) values (p_dat_from+st);    
                  
      st := st+1;  
                
  end loop;  
             
   commit; 
  END;
  END;

  Now lets fill in the data in the table:
  

  execute T_PROC(TO_DATE('01.01.2010','DD.MM.YYYY'),TO_DATE('17.08.2013','DD.MM.YYYY'));

  Data are now filled in the table.
  
  I want to do is do a select statement that will make the following output data:
  

  01.01.2010 - 31.12.2011
  01.01.2012 - 31.12.2012
  01.01.2013 - 17.08.2013

  I want is to get the leap year if there is a. I only need of days in the year, so don't mind the months.
  
  I need to check if there is a leap year in considering the p_dat_from and p_dat_to.
  
  If it isn't then you will get a single record of our instruction select and values will be made of: p_dat_from - p_dat_to.
  
  If there is a leap year in our period we will arrive after statements (example above).
  
  01.01.2010 - 31.12.2011 <-first date is p_dat_from and second is the last day before the leap year
  01.01.2012 - 31.12.2012 <-this is leap year. First date is the beginning of the leap year and the last date is the end of the leap year or p_date_to (if it ends in leap years).
  01.01.2013 - 17.08.2013 <- and this is the period after the leap years.
  
  It is a piece of code that I fell or with up to now:
  

  SELECT
  MIN(date_from),
  MAX(date_from)
  FROM temp_leap
  WHERE remainder(to_number(to_char(date_from,'yyyy')),4) = 0
  union
  
  SELECT 
  
  MIN(date_from) over (partition by to_char(date_from,'yyyy')),
  MAX(date_from) OVER (PARTITION BY to_char(date_from,'yyyy'))
  FROM temp_leap
  WHERE remainder(to_number(to_char(date_from,'yyyy')),4) <> 0
  
  ORDER BY 1,2;

  OK, that's all. I hope that its understandable that I do.
  If you have a questions please ask away.
  
  PS is there anything I need to do. You don't have to bother with the questions "what i February is after before etc." I don't love about it. All the other logic is already fixed all I need is what I wrote above.
  
  Thank you.
  
  Published by: BluShadow on March 14, 2013 08:24
  Fixed barcode labels

  Here's a way...

  SQL> create table temp_leap(date_from DATE)
    2  /
  
  Table created.
  
  SQL>
  SQL> insert into temp_leap
    2  select date '2010-01-01' + rownum - 1
    3  from dual
    4  connect by rownum <= (date '2013-08-17' - date '2010-01-01') + 1
    5  /
  
  1325 rows created.
  
  SQL>
  SQL> commit
    2  /
  
  Commit complete.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  select min(date_from)||' - '||max(date_from)
    2  from
    3        (select date_from
    4              ,sum(leap_yr_switch) over (order by date_from) as leap_yr_switch_cnt
    5        from (
    6              select date_from
    7                    ,case when lag(leap_yr) over (order by date_from) != leap_yr then 1 else 0 end as leap_yr_switch
    8              from (
    9                    select date_from
   10                          ,case when mod(to_number(to_char(date_from,'YYYY')),400) = 0
   11                                 or (    mod(to_number(to_char(date_from,'YYYY')),4) = 0
   12                                     and mod(to_number(to_char(date_from,'YYYY')),100) != 0
   13                                    )
   14                           then 1 else 0 end as leap_yr
   15                    from temp_leap
   16                   )
   17             )
   18       )
   19  group by leap_yr_switch_cnt
   20* order by min(date_from)
  SQL> /
  
  MIN(DATE_FROM)||'-'||MAX(DATE_FROM)
  -------------------------------------------
  01-JAN-2010 00:00:00 - 31-DEC-2011 00:00:00
  01-JAN-2012 00:00:00 - 31-DEC-2012 00:00:00
  01-JAN-2013 00:00:00 - 17-AUG-2013 00:00:00
  

  Published by: BluShadow on March 14, 2013 08:51
  a slight correction in the calculation of the leap year, forgotten 100 years being does not leap.

• What trigger to use to insert data into the table db forms

  Hello
  
  My form is current having a block of database with the table reference. When you enter data into the form field and click Save. Automatically record is inserted in the database table.
  I want to do this under manual insert. I changed the block of data to a data non-base. Where should I write the insert statement to insert data into the table.
  Is - shutter release key of the form-level validation?
  
  Please notify.
  
  Thank you
  Didi.

  You can guide me how to remove the message FRM-40401 no changes to save and instead, I wanted to put 1 transaction record successful... some like it like that.

  Hi didi.
  And this is my last post I'll sleep. ;)
  Take form level trigger named preform
  and write on it

  :SYSTEM.MESSAGE_LEVEL := 5;
  

  I hope this works...

  Hamid

  Mark correct/good to help others to get the right answers. *

• How to share data in the tables ' User_ * ' with another schema

  I want to share the data in the table WHERE USER_SEGMENTS with another schema. If I create a view and grant select on the view, when the other schema queries the view data are identical to themselves querying the SYS.user_segments table directly.
  

  create view sys_user_segments as select * from sys.user_segments;
  grant select on sys_user_segments to A;

  My guess is that the SYS.user_segments table is a view based on the current user.
  
  Is there a way to share such data without creating a copy of the table?
  
  Oracle: 10g
  
  Thank you

  If the ADMINISTRATOR is concerned about B access to DBA_SEGMENTS (or by creating DBA_SEGMENTS views that belongs to a user who has access on top and then grant access to this view of B), it seems pretty crazy allow that kind of database connection.

  If you create a database link belonged to B that connects to A, B is, in substance, given any privilege that has exercises. But it is done in a very, very dark which will no doubt be neglected in the future when someone gets a check. He'll be sitting here to wait that someone (accidentally or intentionally) Decides to exploit the security hole and do something that is causing a problem (by removing all data from a table, grabbing all the sensitive data in a table, etc.). Risks of this almost certainly far, far* far * outweigh the risks of even leaving B to obtain direct access to DBA_SEGMENTS.

  Justin

• Insert XML data from the Table-&gt; back to null

  Dear Experts,
  
  -I have table xml as below:
  
  Example of CREATE TABLE (XML_spec XMLTYPE);
  
  Insert in the example
  Select ' < name of Message = "dataStaticInvestor" type = "IncomingMessage" >
  < name of field = "batchReference" > OPENINGBATCH000000 < / field > < List name = "data" >
  < = record name "data" >
  < name of field = "externalReference" > 01234567890aaaaaaa < / field >
  < name of field = "participantID" > OD001 < / field >
  < name of field = "participantName" > EQUITY SECURITIES INDONESIA, PT < / field >
  < / recording >
  < = record name "data" >
  < name of field = "externalReference" > 01234567890aaaaaaa < / field >
  < name of field = "participantID" > OD001 < / field >
  < name of field = "participantName" > EQUITY SECURITIES INDONESIA, PT < / field >
  < / recording >
  < = record name "data" >
  < name of field = "externalReference" > 01234567890aaaaaaa < / field >
  < name of field = "participantID" > OD001 < / field >
  < name of field = "participantName" > EQUITY SECURITIES INDONESIA, PT < / field >
  < / recording >
  < / list >
  < / message > ' double.
  
  Select * example;
  
  create table hasil1 (c1 varchar2 (500), c2 varchar2 (500), c3 varchar2 (500));
  
  -This step I create the procedure to insert xml data into the table as the batch.
  
  DECLARE
  x XmlType;
  BEGIN
  Select XML_SPEC in x for example;
  
  insert into hasil1
  SELECT
  p.Extract('/Record/Field/@externalReference').getstringval (C1),
  p.Extract('/Record/Field/@participantID').getstringval (C2),
  p.Extract('/Record/Field/@participantName').getstringval () as c3
  TABLE (XMLSequence (Extract(x,'Message/List/Record'))) p;
  commit;
  END;
  /
  
  -when the result of select hasil1, the output is back 3 rows and 3 columns, but all data is a null *.
  
  Best regards
  Sigcle

  You don't explain what output you need, but I guess something like this:

  SQL> insert into hasil1 (c1, c2, c3)
    2  select x.c1, x.c2, x.c3
    3  from example t
    4     , xmltable(
    5         'Message/List/Record'
    6         passing t.xml_spec
    7         columns c1 varchar2(500) path 'Field[@name="externalReference"]'
    8               , c2 varchar2(500) path 'Field[@name="participantID"]'
    9               , c3 varchar2(500) path 'Field[@name="participantName"]'
   10       ) x
   11  ;
  
  3 rows inserted
  
  SQL> select * from hasil1;
  
  C1                     C2        C3
  ---------------------- --------- --------------------------------
  01234567890aaaaaaa     OD001     EQUITY SECURITIES INDONESIA,PT
  01234567890aaaaaaa     OD001     EQUITY SECURITIES INDONESIA,PT
  01234567890aaaaaaa     OD001     EQUITY SECURITIES INDONESIA,PT