Computer goes into sleep within 30 seconds
Original title: locked user switch user pc goes to sleep all by it, itself. Any ideas?
This happened just after the last day of 19/05/2013 was 14 things up to date. In addition, the flash player update at the same time.
After the reboot, that everything went haywire, I did a system restore, it didn't work, then I did a clean reboot that fixed a number of things.
but now, this THING is going to sleep in 30 seconds, I can't seem to fix it. Change username appears when I click on locked user!
If I had hair I would be taking it out. Laughing out loud
Ideas, I grow more full!
I don't know what windows and aps section it was under.
PS The PC was built for the games for the most part, if that helps
Hey, Downey,.
If you could answer these questions in order to better understand the issue, it would be hel.
-You have power plans set up on the computer? (http://windows.microsoft.com/en-in/windows7/change-create-or-delete-a-power-plan-scheme)
-With regard to the user switch arise, where exactly are click you?
-How many user accounts you have on your computer?
-You see a symbol of lock next to the stop button in the start menu? (See http://windows.microsoft.com/en-IN/windows/which-operating-system for current system is installed on the computer.)
Here are a few troubleshooting steps you can try and let us know the result.
1. run the power Troubleshooter and check if it helps the sleep mode issue.
http://Windows.Microsoft.com/en-in/Windows7/open-the-power-Troubleshooter
2. change the settings for sleep mode according to the steps in http://windows.microsoft.com/en-in/windows7/sleep-and-hibernation-frequently-asked-questions
I hope that these steps mentioned in the links above can help you with the question of sleep mode.
In addition, provide us with more information about what exactly happens with the locking of the user and the user of the switch.
Tags: Windows
Similar Questions
-
original title: sleep/hibernation
When my computer goes into sleep mode, I have to press the power button to turn it back on. I used only having to press a key on the keyboard.
Can someone tell me how to solve this problem, as if it was before?
Well, on the theory that your computer is awkward, try to change the settings to another thing and OK your way out the control panel. Then go back and put them in the way they were and OK your way out. Occasionally, it will reset the internal parameters and things can return to normal.
HTH,
JW -
When my computer goes into sleep mode, sometimes refuses to wake up. BlueScreen
When my computer goes into sleep mode, sometimes refuses to wake up. It can go up to an hour and when I finally get it to turn back, I get the following blue screen message:
Signature of the problem:BCP1: 0000000000000003BCP2: FFFFFA80094F7A10BCP3: FFFFF80000BA2748BCP4: FFFFFA800B570010OS version: 6_1_7601Service Pack: 1_0Product: 256_1It can help to look at the files minidump against accidents with a debugger.
Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?
The following link has information about the use of Windows Live SkyDrive:
If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop
In addition, you do not necessarily have compress the minidump files, you can download one at a time.
-
Windows 7 computer goes into Sleep Mode while the activity of the system
Hello, I have windows 7 premium. I think there may be a bug that needs to scan, my system goes to sleep while there is the activity of the system. For example, when downloading a file, do a virus or by post where analyze or defragment. I believe that the year 2010 are the operating systems with the smart enough so that the system is active and goes to sleep during execution of these programs are active. Can someone tell me if this is a bug or suggest software to keep the system awake while 'X' program options is actively running, for example if I do a defrag of HDD, I don't want to change power if the computer is running all night, only for 2 or 3 hours that the scan is running Once the program ends defrag'ing the systemit should then wait for the time set in power options and stop.
Hello
If there is no interaction from the user to a certain amount of time, the computer goes into a sleep mode was
application runs in the background. This isn't a bug. You may need to change the settings for options of power as a result.Sleep and extended: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions
Change, create, or delete a power plan (scheme)
http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-schemeThanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
computer goes into sleep mode every 5 minutes
My computer goes to sleep every 5 minutes in standby mode and needs to get back to where I left my password. I tried to change the power options, but he keeps doing. If I'm watching a video, the screen turns off and ask for my password, but you can still video game.
Hello
Open windows control panel, open personalization, click on the link to screensaver at the bottom right and in the next window, set the time in the area of 'Wait' for once you want before the screen saver appears, and click on apply. Or if you never get the logon screen, remove the check mark next to of "on resume, display the login page» Click on apply to save the changes.
Then open windows control panel again and click on Power Options, click Change plan settings next to your current power plan selected in the next window, set the time using the drop-down list next to "Turn wide Display" to a more acceptable level and then click on save changes.
Note: Set in the Options menu of food to be slightly longer than the time set in the Menu of the screen saver or you will never see your screen saver start.
Kind regards
DP - K
-
Windows wireless service turns off when the computer goes into sleep mode
Windows 7 64 bit, HP DV4 laptop. Was working fine until the update of adobe reader may also have a windows update. Have since been uninstalled adobe reader software and reinstalled. Updated the qualcom wireless driver. WLAN keeps logging service when my laptop goes to sleep. I can restart with services and it works again. Autoconfiguration WLAN service is set to restart the service for 2 trys.
Hello
. You receive an error code or message?
Please follow the methods and mark the question below:
Method 1:
You need perform a clean boot to prevent possible ask contradictory from interfering with your computer.
To put the computer in a clean boot state, you must follow the steps in the article mentioned below. How to solve a problem by performing a clean boot? : For more information on the execution of clean boot, follow the link.
http://support.Microsoft.com/kb/929135
Note: You must follow step 7 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.
Method 2:
Using the troubleshooter from network in Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 3:
Why am I disconnected from my network? :
http://Windows.Microsoft.com/en-us/Windows7/why-am-I-being-disconnected-from-my-network
Method 4:
Wi - Fi and in Windows network connection issues:
I hope this helps.
-
Will be that the download stops when the computer goes into sleep mode?
Will download, install, or all these action stops when the laptop goes to sleep.
MK
Yes, it will be.
-
Computer goes into sleep mode automatically
Original title: waking up from sleep
Hi, I have windows 8, I have a question that has not already happened in win 7
Then, when I put my computer on standby covering the screen down. And when I wake up, I had to press or on the keyboard, the Start button / stop or mouse button. the computer turns on itself. so for about 4 seconds it shuts itself again. the second time by the press of the keyboard and etc will not turn the computer off again.There is a small problem, but its getting really boring, time on the computer turns off by itself again is like 10 seconds of frustration, and I turn it back on, it's just really annoying after months. I thought that I have will get used to it, but nope.Hi Ianlei,
We are happy to know that you have solved the problem.
Please let us know if you need any other assistance on problems with Windows.
-
If I don't use the computer, after 10 minutes, it disconnects on me and I have to sign in with my password back, sometimes I have people use my computer and I don't want to have my password thanks for any help you can provide Kirsh
Hello
Click on the Start Menu, type personalization and press ENTER. Click on the link of the screensaver at the bottom right and in the next window, Remove the tick from the box "on resume, display logon". Click on apply, then Ok to save the change.
Kind regards
DP - K
-
Whenever my computer goes into sleep mode, I lose my internet connection.
When I 'wake up' my computer, the internet icon in the taskbar seems to be connected, but it is not. When I diagnose the problem, it is said that he lost the DNS connection. I then have to reset the adapter, and it will connect. It loses connection every time "standby mode". Patches?
mrslaurae,
Thank you for visiting the Microsoft Answers community forum.Here are a few things to try to solve this problem:
To clear the DNS cache:
Click Start, type cmd in the search box, and then click cmd in the list programs.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
Once at the command prompt, type ipconfig/flushdnsTo reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
http://support.Microsoft.com/kb/299357Disable IPv6:
1. hold down the Windows key and type R, enter "ncpa.cpl" (without the quotes) and press enter
2. right click on each network connection, and then select "Properties".
3 remove the check mark from the box 'Protocol Version 6 (TCP/IPv6) Internet
4. click on OK to exit the dialog boxNOTE: You should do this for each network connection.
Let us know if this solves your problem or if you need more information.
Thank youGloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
original title: will BE BACKUP OCCUR IF MY LAPTOP GOES TO SLEEP MODE? (WIndows 7)
I have my laptop value backup at midnite. I have the computer goes into "sleep" mode before. Is my computer still backup as expected?
You can get the Task Scheduler to wake him up.
You can configure the backup form program timed task in the Task Scheduler with the game of "wake up to perform this task. Depending on what you use for backups, the backup application can already use Task Scheduler & all you need to do is add the "wake up to perform this task" setting.
To open Task Scheduler, type 'Planner' in the search box of the start menu. Search in the left pane and select its library. Browse the tasks in the list that has your backup program in its "Action" tab Make a copy [a test version] 1 by clicking Export in the right pane & recording in an easily accessible folder, 2 when you rename the file in the selected folder [simply add 'Test' at the beginning of its name] 3 click on import in the right pane to bring in the copy renamed the task from the same folder.
Now you can play safely & just disable the test version when you are finished. The main change would "allow to wake up...." "and it's in the conditions tab.
If it works, let the enabled test version & disable the original for a few days while you're fairly confident that the new version works. Then you can delete one of them - but only after have exported them again if you know that you can recover later.
-
What printer goes into sleep mode computer stops
just got a hp7520 as a gift. updated from xp to 7. If the printer goes into sleep mode, the computer shuts down. currently I'm keeping the printer in demo mode so that it does not expire. Anyone know how I can use printer without him turning off the computer in normal mode? I talked about Noone has even heard of that happening. I hope someone can help. Thank you!
Hi @JNBLanocha
My stomach says mt that perhaps you have the printer USB cable connected to a USB 3.0 port on your computer instead of a 2.0 port. The image below is some examples of 3.0 ports.
3.0 ports are supposed to be backwards compatible, but I've seen questions arise.
I wonder if the cable you are using is the computer and causing problems pulling power. All I can do at this stage is to assume and to gather information. Please post back with the answers to the following questions;
- You have a USB connection
- If the USB is connected, you use a 2.0 port or 3.0?
- Again, if you use a USB connection type, have you tried another USB cable? It could be a cable problem.
- You put XP or you remove XP and install Windows 7?
- You have your printer connected directly to a power outlet, or you are using a power strip/bar, or a surge protector?
- Now this may sound silly, but you have a timer on your computer, such as the hibernate after so many minutes and maybe the computer and the printer are set at the same, it is possible the moment closures / sleep coincide.
I look forward to hear from you and to work towards a solution.
-
Lose my ethernet internet connection when the computer goes into mode 'sleep '.
I have a desktop with Windows Vista. I have my internet through a cable company. I've never had problems of connectivity for 2 years and then out of no where he would pass the signal after mode 'sleep'. I had the cable company come out and check on all equipment and it's good that now, I'm still clueless and confused. The connection icon have an exclamation point in a yellow triangle and say "limited connectivity" and «identify...» "and then I click on Local area connection status and make a diagnostic test that will get me connected to"network 2 "until it goes into sleep mode and then the process repeats. It's boring say the least. When I login and go to the LAKE State he says;
IPv4 connectivity: Internet
IPv6 connectivity: limited
Media state: enabled
Duration:
Speed: 100.0 Mbps
He said that the issue is resolved after each diagnostic test, but then it happens again. I need some help pleaseeee!
> I need some help pleaseeee!
But you're in the wrong group! It is a problem with your network driver
or your Windows installation. You have this repost to a suitable for Windows Vista
Forum. It is possible that a newer driver from the network has a problem with sleep
mode, you should try another pilot (older or newer).
From your description, there is a problem to renew the lease of your
DHCP server (which must be running on your router), it does not use the
IP address assigned earlier or he does not do / IP address (which
should be the same) we get the router. It is also possible that the
problem is with the router or a new firmware on this subject. You should study
These two avenues, including a replacement of the router and firmware.
Another very simple solution is to configure your PC for a static IP number and
leave it like that. In the forum, I mentioned, people will be able to talk to you
through this option if you don't know how to do this.--
KaiIEFAQ: http://iefaq.info Newsgroup: microsoft.public.de.internetexplorer
-
Monitor goes into sleep mode during the installation of Windows 7
Hello, I'm doing a new install of Windows 7 pro on a new SSD. He gets regarding to reset for the second time during the installation, and just before showing the page where you name the computer and configure user accounts, the monitor goes to sleep and won't return. only way to recover is to reset the machine, only to do exactly the same thing again. Anyone know what could be the cause? I used the same disk of windows for many expenses format / install Windows after hardware upgrades in the past and this has never happened before. Can provide the complete specifications of the system if necessary. Help, please!
Hi Danpedro,
I see that the screen goes into sleep mode, in the last step of installing Windows 7. I'll help you with this problem.
1. What is the brand and model of the computer?
2. you have an external display driver card attached to the motherboard?
3. you format the hard disk during Windows 7 installation?
Method 1.
Disconnect any external devices and restart the computer to see if it helps complete the installation of Windows 7.
Method 2.
If you have a driver to attached external display card, then you can disable this external driver in the BIOS and check if that helps complete the installation of Windows 7.
Warning of the BIOS:
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Let us know if you need assistance with any windows problem. We will be happy to help you.
-
Satellite Pro C660 goes into sleep mode, even if I use Internet Explorer
When you use Internet Explore particularly in webmail or remote access, the computer does not recognize typing and goes into sleep mode.
I've updated the BIOS and it is not fixed.
Hello
Before talking about possible fix or workaround solutions, could you please give some info on your laptop model and the system?
Have you tested the laptop with the factory and preinstalled Toshiba system parameters?
Maybe you are looking for
-
So far, all the patches require firefox to be on. Mine does not start.
Mozzilla will NOT start.
-
Tecra S3: Where to find a fingerprint software for Vista
Can someone help me where I found a finger print software for Windows VISTA laptop S3?
-
Recovery BIOS for Satellite U400 - 138 PSU44E
Hello I could not with update of the bios that I had taken the official support page from toshiba bios file. I don't know that I had chosen the right bios file. But something is wrong and my laptop is brick, and now. I'm trying to recover the bios wi
-
OfficeJet pro 6830: 08024200 × b error message
I was not able to find any help on the HP site for the error message 08024200 b × for the software update failed. This happened, unbeknownst to me, almost every day since June this year. I have no message from HP or MS about the situation. Any help
-
Kan netwerkpad niet vinden. Geen netwerktoegang, IPv6 staat aan maar toch clean het geeft wel is een foutcode: 0 x 80070035. Wat kan ik toch mijn NAS installatie om hiermeedoen you good instaleren?