Computers laptops Vista do not see printers available on the XP Home network

Similar Questions

• My Win7 PC still does not see XP PC on the same home network. Why?

  I got a home network, connected to the internet and all the XP PC see each other. File sharing is turned on on the set. On my new Windows 7 PC only occasionally show some, not all (this varies) of the other PC in the group. When I see the other PC I can access their files compatible with the permissions, I put. Even if I tried to leave the PC to access the files from the PC Windows 7, they impossible for most, but just as with intermittent visibility of the other PC the PC Windows7 this sharing has come and go when these PC trying to access to the Win7 PC. How can I fix it? It was relatively easy to work under XP, I'm afraid that Windows 7 is causing trouble. Thank you, Dean

  Hello

  Are you aware of any changes made on the computer before this problem?

  
  Method 1: run the troubleshooter from the link below and check if the problem persists.

  Open the homegroup troubleshooting utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2: I suggest to follow the steps from the link below and check if the problem persists.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Method 3: I also suggest you to turn off the firewall and check if that helps.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Hope this information helps.

• Desktop PC cannot connect while laptops successfully connect via a wireless connection on the same home network.

  I have a Windows XP desktop PC.  I also have two laptops.  I can connect to the internet via laptops via my wireless router, but I can't connect to internet via desktop even when it is plugged directly into my DSL modem.  I replaced the Ethernet cable, nothing helps.  My status of connection to the Local network on the desktop shows little or no connectivity, but I've done all the troubleshooting procedures, (including / Release ipcong & ipconfig / renew) cause a message saying: unable to contact your DHCP server.  Any thoughts on how to solve this problem?

  What's your DHCP enabled router wireless

  If yes then brand IP automatically defined in properties Office lan yor

  or try set ip next ip address manually your portable computer ip address serial with the same mask of the subnet and the gateway address.

  It can happen when dsektop cannot find the DHCP server

  Concerning

  Hope this will do the needfull

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• I do not see my PS3 in the box "share my media to.

  I tried many things and still do not see my PS3 in the media part in boxing trying to share Media Player.  I know not if appears as unknown device, but I don't see that either.  I finished reloaded Vista and still no luck.  I can connect to the internet through it, and that works fine, can also ping.  It appears in the 'LAN devices list"in my router wireless so I don't think it's a router problem.  I checked that all necessary services are running after looking on the web for a solution.

  Another strange thing, it's that he sees my HR20 DirecTV as a media server, which is located on the same network.  It's very strange to me that they can see each other by my PC can't seem to see my PS3.

  No idea why I can't share photos, music and video to my PS3 from my Vista PC.

  You will also need to manage the network set up on any PC to ensure that file sharing is actually active. Your router must also have UPnP (Universal Plug and Play) enabled otherwise, your PS3 will not be displayed.

  If your PC/PS3 is wired or wireless is not relevant. If they use the same router to connect to internet thenpotentially they are on the same network, but the necessary network settings allow the flow of traffic.

  Your work laptop is probably set up to work on a business network, most of which do not allow the streaming media for the parameters would be disabled. (I'd say leaving them ths way, otherwise he cannot connect to the network at your workplace when you come back!)

• Not enough space available on the disk without title

  Every time when I trie to install any creative cloud application, I get an error "not enough space available on the disk untitles-(30). There is no disc titled untitled and there is enough free space (50 GB).

  It happens on my Mac Mini and Mac Book Pro. The only similarity I can find, is that they have both a Kingston custom 60GB SSD.

  Does anyone have a solution to this problem, I already tried to change the location of installing a HARD drive.

  You're right, this isn't a problem downloading.

  It's a lack of space in / tmp (or/private/tmp). It is a silent place to stash huge to download files, but moving on... It's an easy fix.

  If you're set up with an SSD a popular board 'longevity' is the tmp in RAM or elsewhere to save some wear and tear.

  In expression, type "df - kh", if you see/private/tmp anywhere under "mounted on ' and the 'result' is not large (several concerts I assume), there is your problem.

  The most popular advice ramdisk (can not find the link right now) is to place a startup item to do this job and name "RamFS" or/System/Library/StartupItems/RamFS. Move it out or chmod 000 it temporarily, restart and install. You can replace the StartupItem subsequently (and restart).

• "Your bootable USB key could not be created there is not enough space available on the disk.

  I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?

  MacBook Pro (retina, mid-2012)

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  Use a 8GB drive.

• Do not see my images in the Windows 7 preview pane

  WHY CAN I NOT SEE MY IMAGES IN THE PREVIEW PANE WITHOUT HAVING TO RIGHT CLICK AND THEN SELECT PREVIEW OR JUST OPEN THE FILE? IS THERE A SETTING WHERE I CAN JUST HOVER CURSOR OVER THE ICON AND I CAN GET A PREVIEW OF THE PHOTOS? I'VE SEEN THIS DONE ON OTHER PEOPLES COMPS RUNNING WIN7

  * original title - PANE PREVIEW (PHOTOS) HELP!   PLEASE.*

  You can't right click, you have to click once to highlight the file you want to preview.

  However, you must have installed preview Manager program.  Windows can preview most of the images (jpg, bmp, gif), but others, like the photoshop files, need another program installed.

• Somehow, I hit fullscreen on my home page and now can not see an arrow to the left or my bar menu or a refresh icon.

  Somehow, I hit fullscreen on my home page and now can not see an arrow to the left or my bar menu or a refresh icon.

  Original title: Homepage

  Somehow, I hit fullscreen on my home page and now can not see an arrow to the left or my bar menu or a refresh icon.

  What happens when you click on a place on the web page and press F11?

• I bought there are elements adobe 6 and want to install it on my new computer. However, I do not see anywhere to download the software and I do not have a disk. How can I install on my new computer?

  I bought there are elements adobe 6 and want to install it on my new computer. However, I do not see anywhere to download the software and I do not have a disk. How can I install on my new computer?

  As far as I know, download the oldest version of items is 7

  kglad links in response to #1 here can help https://forums.adobe.com/thread/2017859

• Hi I have an error code 205 downloading cloud adobe creative that I use proxy in my company, but do not see this error in the public internet, this problem can I solve this problem

  Hi I have an error code 205 downloading cloud adobe creative that I use proxy in my company, but do not see this error in the public internet, this problem can I solve this problem

  In proxy environment, the computer cannot connect to the Adobe servers, so it does not work. The proxy or the firewall should be disabled if you use creative cloud.

  Hope this will help you.

  Kind regards

  Hervé Khare

• PS 14.2.1 running x 64 just updated through creative cloud.  I select a layer but do not see "Extract assets" in the file menu.

  PS 14.2.1 running x 64 just updated through creative cloud.  I select a layer but do not see "Extract assets" in the file menu.

  It's a little confusing, but creative cloud, you will also see fine 'Photoshop CC' and ' Photoshop CC (2014).

  The first is 14.* PS and the second is PS * 15-active extract in Photoshop CC (2014).

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Windows 7 Home premium network problem, computers can access the internet, but they do not see each other on the network

  I was trying to set up a homegroup on my main computer, but on the second computer, I never had the opportunity to join the homegroup. I'm sure that I have everything set up properly, but I can't get the second computer to join.

  I have a switch that my internet runs and a cat cable goes to each computer. Each computer can access the internet without any problem, but none appear in other network list. They have the same name of working group, I just can't understand it. I use Windows Firewall.

  Any help would be greatly appreciated.

  Maybe this can help.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Computers laptop Toshiba are not good

  NEVER buy a computer toshiba laptop.

  (1) packed in the first 2 months motherboard
  (2) If you like polishing then yeh, go ahead - but the finish on the a300 sateelit I have is rubbish - it's always dirty and greasy of all traces of finger - even if wash you your hands all the time there still looks terrible
  (3) the finish begins to deteriorate, I've never used anything other than water and a soft cloth to clean, never scratched my laptop - but the paint/coating begins to flake away and it looks cheap and nasty
  4)....
  5)....

  With all due respect, but I don't agree with you.
  I use computers laptop Toshiba for years and have never had serious hardware problems.
  I'm also owner of the Satellite A300 and I'm happy with it. The design is very nice and all surfaces laptop are pretty difficult and used to scratches.

  My Satellite A300 is almost a year old, but without a single scratch. It looks like the other.
  With fingerprints is maybe a little boring, but from time to time is not so problematic to clean.

  I don't know what you do with your laptop but the A300 laptop is really compact and robust. I use my phone extensively for my work, and when compared with the notebooks I noticed that areas close to the touchpad where the hands are placed is like new.

  By the way laptop do not clean with water. Talk with your local PC retailer and buy a special liquid for cleaning the PC.