Configuration for the Exchange Server issue

Similar Questions

• who can tell me the configuration for the license server.

  need your help!

  Linglong... .thanks to the same thing... I think you're missing out on something because that its does not work for you... I did the same steps when I was faced with the problem and it has solved the problem in my dissertation...

  Concerning

  Anil

  Save the planet, go for green

  If you have found my reply to be useful, feel free to mark it as useful or Correct.

• Exchange server and Surface RT, can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Hello

  Our company uses an Exchange Server for email, contacts and calendar.

  Can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Kind regards

  Matej

  You must install the SSL certificate before connect you to the Regional service, the easiest way is to go to "desktop" IE10 open, go to the exchange server web access page, click on the notification of "certificate error" red and view / install the store "certificate authorities roots of trust." Then, make sure that your surface RT complies with the minimum requirements of security then connect to the exchange via the mail application server.

• Thunderbird 38.3.0: No writable calendars are configured for the invitations with the provider for Google Calendar 1.0.4

  Hello

  I searched many hours today in the internet and your forums, but it seems that this problem is not solved yet:

  No writable calendars are configured for the invitations with the provider for Google Calendar.

  My Thunderbird is 38.3.0 and the provider for Google Calendar 1.0.4.

  I put calendar.google.enableEmailInvitations; true but it did not help. I also tried [email protected]... @googlemail.com. Calendar works fine, it syncs, I see all the entries etc. But I can't accept invitations even IF she must have write access.

  What can I do? Is there a solution for this?

  Thank you!
  Daniel

  Use CalDAV here to access Google Calendar via lightning. I have no experience with the add-on of the provider.
  In any case, it is my understanding that you must assign an e-mail address to a calendar in order to be able to accept the invitations for this calendar. I see that in your screenshot.
  You can try to remove the Google calendar in lightning and re-create it. Given that all the data is on the server nothing will get lost.
  Or you may want to try CalDAV.
  https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

• Update of security for the SQL Server 2005 Service Pack 3 (KB970892) constantly moved, what can I do about it?

  Update of security for the SQL Server 2005 Service Pack 3 (KB970892) constantly moved, what can I do about it?

  The update tried to automatically install dozens of times, but it keeps failing, is there something I can fix which will allow this facility. I have reasonable computer skills but I'm not good at that, I need step by step help and a full explanation of acronyms.

  Hi Laurence,.

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  I hope that helps!

• BlackBerry blackBerry 10 does not receive the emails from the exchange server

  Hello

  We have the problem that peripheral Blackberry doesn't synchronize with the server exchange since last week. This is valid for two (classic / Z30) among the four devices, the other ones (classic / Z10) are functioning normally. All have the 10.3.2.2474 version.

  I rebooted the unit and removed and rebuilt the e-mail account on the BB, but it doesn't help. Account settings are ok (no messages during installation). The device connects to the exchange server (for example, I can see the account's e-mail records in the options) and I can also send mails. But I don't get e-mails, calendar items, contacts, etc.

  Any ideas?

  Thank you

  Axel

  Hello

  I'm not 100% sure, but I think that there is a restart due to the update of the BONE last week. I don't know if this has coincided with the problem.

  I reloaded the OS yesterday via the LINK. It seemed to me that does not solve the problem because I have not yet received mail for a while. However, this morning the mails were back.

• Where to put the report server ip and port for the Siebel server?

  Hello

  Where to put the report server ip and port for the Siebel server? I have checked the document "Reports Siebel Guide" but does not know where is the configuration section ' ip address of the server and port ' for 'Oracle BI Publisher.

  Note: I have installed BI Publisher, now necessary to define the ip editor and siebel server port.

  Please help, thanks.

  Hello

  Communication between Siebel and BEEP coming through webservices. You must set the Siebel Outboundwebservice 'PublicReportService' address to address BI Publisher.

  Similarly, the address of the webservice Siebel Inbound 'BIPSiebelSecurityWS' will be used by BEEP setting under the security model of Siebel - Siebel end Webservice poin of connecting to Siebel EAI, data inorder of success authenticate the Siebel user to perform the tasks of report being initiate Siebel UI.

  Please go through the integration document attached to the thread "Re: ADVISE WEBCAST: BI Publisher 11g Configuration with Siebel", it is any integration Siebel with BEEP 11g steps. " But if you go through each step, there are details about why we do it. Through this way you can better understand the integration.

  I hope this helps.

  Thank you
  Maria

• Disable the execution of the tasks for the Exchange Connector

  EIS,

  We use the Exchange for IOM connector and use almost all of the features of the connector. However, some of the processes on the process for the Exchange user form is not currently in use and will never be used. How can we remove these tasks of process safe? Is it fair to delete all the tasks? If someone else tried it? There is no documentation for this on the connector itself, that's why I am posting this here.

  For example, the named taks process:

  • 'Keep deleted updated default items'
  • "Database update"

  These are things we do not want to be triggered. We tried just renaming the ("Updated_disabled of the database") - but this obvisouly does not work.

  Is it fair to remove stains and we're home free? No internal configuration anywhere required by the Exchange Connector?

  Kind regards

  Vegard

  There are a lot of posts here on the triggers and spread. You kept the format of update " Update" by adding the change at the end of the task instead of starting name. This will result in ongoing triggers the task.

  -Kevin

• Is it OK for the test server, and the server signs Local point to the same location?

  There seems to be three places where the files of my site: local files, server assessment and remote server.  I am happy with the remote server.  What I'm confused about are the other two.

  I understand that to build a site using mysql databases that I need to set up a test server.  Here is my configuration: Windows 10, CBWMS 2015.1 using XAMPP with the folder root of my site in htdocs.  I tested FormMail, hence the name of the site is formmail

  

  So, I open one of my files from the local files (right) Panel, modify it and it save (in the local files Panel).  I then use a preview in the browser to see my changes.  It seems that I didn't need to use was ABLE to move the file to the test server, because the file/s are already here, because as shown in the screenshot, the display of local files as the testing server view are in the same place.  What is the point of the testing server Panel?

  I know that I can put the Panel on the left with the remote server. This will allow me to sync with my ISP host.  If I put the left - and probably testing server Panel a sync is useless because the files are in the same place as the Local file?

  Maybe my setup is incorrect.  I guess my question is, is it OK for the test server, and the server signs Local point to the same location?

  Thank you gentlemen (and Lady!) I'll go forward with newfound confidence, Bravo.

• Invalid configuration for the device 3

  Hi all

  I have set up a lab nested with three hosts esxi and two warehouses of data connected with the Microsoft iscsi target server. I know nested vm is not supported, but I'm trying to implement this workshop because I support a real VMware environment and I wish I could test some things before I break anything, so it's important. I get this error when you try to create a virtual machine "invalid configuration for the device 3.  Someone knows how can I know where is the problem?

  Thank you

  I think I can find the answer, it seems that it could be a windows problem causing data corruption. Somehow I created a VM but get all kinds of error trying to create an another VM.  Iscsi targets set up using windows server 2012 and it seems that there is a fix from Microsoft below which deals with corruption LUNs in windows 2012.  I have not yet tested, but this seems to be the right direction. http://support.Microsoft.com/kb/2908783

• Problems with the configuration of the Essbase Server

  Hi all
  
  -J' have a simple environment with a single Foundation Server with only the Foundation services running on it (only the basic components installed). On the same Essbase server, I installed (by default) foundation and Essbase components.
  -I am facing a problem with the configuration of the Essbase server. All steps complete with the exception of the last step: deploying web applications (APS and EAS) to the WebLogic Server.
  -FYI, I am deploying the web application to the existing domain created on the server of the Foundation. As all products must be on the same domain.
  
  
  During deployment, the WebLogic administration server reports the following error:
  
  BEA-149003
  Cannot access source application information in /opt/shared/apps/hyperion/Oracle/Middleware/EPMSystem11R1/products/Essbase/eas/server/AppServer/InstallableApps/Common/aps.ear for application "APS".
  The specified error is: there is no file of the application.
  
  
  Now the path and the above files exist on the Essbase server, but not on the server of the Foundation. So after playing with the WL administration console and reading of Sandeep post [1], I came to the conclusion that:
  1. the Essabase components must be installed on the Essbase server, but not configured.
  Now, this means that I need to install all the components on the server of the Foundation, even though I only will use to deploy the services of the Foundation which seems a little ridiculous?
  2. create a new domain on the Essbase server, so the EAS/APS will be deployed on the Essbase server - but will not be on the same domain as the other products.
  
  Well, I am a newbie with WebLogic and so would welcome your valuable contributions!
  
  
  Thanks in advance...
  
  
  References:
  [1]. http://sandeepseshan.blogspot.in/2009/02/weblogic-server-10-deployment-error.html

  The configuration documentation.
  "On the computer on which you will administer the WebLogic Server, you must install all of the Web applications for all applications that you plan to deploy on any machine in the environment. (The Administration WebLogic Server is installed and deployed on computer Services Foundation) »

  You should should not create a new domain for deployment on other servers and can use the existing and only to deploy web applications on the servers that you want running on.

  I don't know what version you install, but if it's 11.1.2.1 then consider the OS is similar on both machines
  "All Web applications in a deployment of EPM system must be deployed on windows computers or on all UNIX machines."

  There do not appear to be there in 11.1.2.2 so I guess it isn't the rule more.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• PDF has not been configured for this web server-2008 Server

  Hello
  
  Try to open a report in preview PDF in the workspace and get the error "" PDF has not been configured for this web server ".
  I use a 32-bit server and hyperion 2008 11.1.1.4...
  I already installed Ghostscript 8.51 in my server...
  
  Thank you

  Yes, I got the solutions... .i need to run the HRprinters.exe then I restart EN and pool services

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• Error code 64 c for update of security for the SQL Server 2005 Service Pack 3 (KB2494113)

  Have tried to install KB2494113 - update of safety and he constantly fails to install. Help please as I know very little about the "intricacies" of my laptop

  Hi Phillipmuir,

  Step 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2:

  You can also check the following link and try to download and install the standalone update package:

  Update of security for the SQL Server 2005 Service Pack 3 (KB2494113)

  Hope this information is useful.

• How can I remove guest account configured for the administrator?

  I tried to add a second user account on my computer and I blew it. My main user account is now defined as a standard account and no matter how many times I click the button to set it as an administrator account that he will not save these settings. The guest account (which I want to delete) is defined as an administrator account and it wont let me save it as a standard account, because there is no other administrator accounts. Even when I try to create a new account just to see what he would do he tells me that he cannot accept some of the characters that I use for the name of the account, even if it's just 5 letters, so I can't even create the new account.

  I have no idea what's going on with my user settings, but I want to just that everything back to how it was before... with a single main account configured for the administrator.

  Can someone help me?

  I bet that your administrator account is an admin account and your guest account is a regular account. Buttons that you look at don't tell you the State of the special consideration, but the change that you can apply. In other words, looking at the administrator account, the 'Administrator' button is highlighted not because it's already an admin account!

  Now you should do this, in the following order:
  1. Create a CD to repair Windows via Control Panel / backup and restore. People like you who make their own PC maintenance need.
  2. Test the CD.
  3. Create, test, and document an admin account to spare, even you have a spare House key.
  4. Disable the guest account.