Configuration of 8.52 PeopleTools and ITS

Similar Questions

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• I get the error "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  original title: NTFS problem
  Every 5 seconds, I get a warning (event ID 136) that says: "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  Immediately followed by an error (event ID 137) that says "on the C: volume default transaction resource manager encountered a one-time error and could not start. The data contains the error code. »

  I am running windows 7 ultimate in any way to solve this problem?
  

  Hello

  This problem occurs if the Windows file system transaction log is damaged. The Windows file system uses the transaction log to retrieve the system transactions when a file error occurs. The system of common log (CLFS) transaction logs may be left in an inconsistent state. When the CLFS transaction logs are in an inconsistent state.
  To resolve this problem, delete the files .blf and .regtrans-ms in the folder % Windir%\System32\SMI\Store\Machine.
  After you restart the computer, the registry regenerates the deleted files. These regenerated files are in a consistent state.
  1. click on Start , type cmd in the Search box, and then click cmd in the list of programs .

  2. click on run as administratorand then click continue.
  If you are prompted for an administrator password or for confirmation, type the password, or click allow.

  3. at a command prompt, type the following command and press ENTER:
  fsutil resource setautoreset true c:\
  Note these steps assume that Windows is installed in the default location, drive C. If this is not the case, adjust the drive letter of the path of the folder to match your configuration.

  4 restart the computer.

  I hope this helps.

• vRO 7 assign a workflow to change in a plan of action and its virtual machine

  Setting up the environment

  1 vRealize Automation 7.0

  2 vRealize Orchestrator 7.0 that comes with the vRA

  Action plan and configuration of custom workflow

  1 has created a plan of action that the provisions of a Windows Server VM

  • Action plan has already been published
  • Pu VM provisioned to the catalogue of services without any problem

  2. has created a workflow customized to update the properties of the configured virtual computer

  When I try to run the "assign a workflow to change in a plan of action and its virtual machine", I was not able to choose the model that I created at vRA.

  Anyone has the same problem and how we can solve this?

  Thank you!

  vRA 7 no longer uses the entitled it a state change. All happened to event broker now.

  If you want a walk through the check-out this blog post.

  The activation of the event Broker

• What is the difference between the model and its clone in VMware?

  What is the difference between the model and its clone in VMware?

  Clone

  A clone is a copy of the virtual machine.

  You can't convert back the cloned Virtual Machine.

  A Clone of a Virtual Machine can be created when the Virtual Machine is running

  Cloning can be done in two ways: Clone full and linked Clone.

  A full clone is an independent copy of a virtual machine that shares nothing with the parent virtual machine after the cloning operation. Continuous operation of a full clone is entirely separate from the parent virtual machine.

  A linked clone is a copy of a virtual machine that shares virtual disks with the virtual machine of parent on a regular basis. This preserves disk space and allows multiple virtual machines to use the same software installation.

  Cloning of a virtual machine can save time if you are deploying several similar virtual machines. You can create, configure, install the software on a single VM and then clone several times, rather than the creation and configuration of each virtual machine individually.

  Model

  A model is an original copy or a reference image of a virtual machine that can be used to create many clones.

  Models can be turned on or edited and are harder to change than usual of virtual machine.

  You can convert the model to the Virtual Machine update model base with the latest released patches and updates and to install or upgrade any software and still convert to template to use for the future deployment of Virtual Machines with the latest patches.

  Convert virtual machine model cannot be performed, when the virtual machine is running.  Only the Clone to the model can be performed when the Virtual Machine is running.

  A model offers a safer way to preserve a virtual machine configuration that you want to deploy several times.

  When you clone a virtual machine or deploy a virtual machine from a template, the cloned virtual machine resulting is independent of the virtual machine or the original model.

• got photoshop elements 12 of qvc and its does not work (says it's a pirated software)

  got photoshop elements 12 of qvc and its does not work (says it's a pirated software)

  If not installed, install Adobe Application Manager and then try to install again.

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

  Always the same?

  Try to install using the download configuration file:

  https://helpx.Adobe.com/Photoshop-elements/KB/Photoshop-elements-downloads.html

  Reference:

  Warning: "Adobe software real failure of Validation...". » | Windows

• How Adobe gets DATE and its format?

  Hello

  I'm current date (today) to below JS in some flds and below using FormCalc for some flds in my_form;

  JS:

  var currentTime = new Date()

  Form Calc:

  $.rawValue = num2date (date (), DateFmt(MM/DD/YYYY))

  But I have not much idea how adobe is at that date? For my business it is the first form, that's why they ask me how adobe gets so, date format and its

  1) count local address IP/Internet provider, format?

  (2) or PREMISES of the portable PC/computer user settings, date format? If Yes, for example, if the user (the laptop settings) Germany has a DD. MM YYYY configured, if this user is delivered to the United States on a business trip and if the user opens the form, and then how the date looks like for this user? Depending on the settings of computer laptop user JJ. MM YYYY or local internship provider date format MM/DD/YYYY?

  Thank you

  Go to PDF... No!

• Difference between PeopleTools and Oracle database to remove?

  Hello
  
  I am a newbie to PeopleSoft/PeopleTools. I deleted a folder out of my Oracle database 10 g
  
  DELETE FROM table_name WHERE LASTNAME = 'smith ';.
  
  deleted 1 record
  
  Yet, when I connect on PeopleSoft Ent. The recording shows always when I do a search for the user? I did a refresh on the database and recorded in PeopleSoft and its still there? any help is appreciated.

  Again, I think that you must double check the name of the table that you have removed the employee of.

  Your examples of queries have been by name and not EMPLID. I assume you have the EMPLID. My first action would be to run the following query:

  Select * from PS_PAY_CHECK where emplid =?

  If you get even a SINGLE shot, return to your system administrator and tell him that you refuse to follow his instructions, because that his request to do is illegal. You don't want to be the scapegoat, if there is some sort of fraud that is going on here.

  If the person has not been paid on your system, and then deleting the person is possible.

  People Soft provides tools to achieve this. Execute us on a regular basis. This should be the direction that you are using. Again, ask your system administrator why delivered tools do not work. There should be some kind of rational way to achieve this. If it can't give you a valid reason, I would clean up my resume. The guy is asking you to do things that you should consider saying no to. Because you are a beginner, you should at least ask for the supervision of a more experienced PeopleSoft Developer.

  Assuming you have exhausted all your options for delivery and system administrator gave you a valid justification, you can run this script to generate a set of queries to tell you all the tables where this person exists.

  SELECT ' SELECT "' | A.TABLE_NAME | "' AS TABLE_NAME, COUNT (1) TO ' | A.TABLE_NAME | ' WHERE EMPLID = "?"; '.
  FROM DBA_TAB_COLUMNS HAS
  WHERE A.COLUMN_NAME = 'EMPLID.
  AND THERE ARE
  (SELECT 'X' FROM PSRECDEFN
  WHERE A.TABLE_NAME = ' PS_ ' | RECNAME
  AND RECTYPE = 0);

  Don't forget to replace the question mark with the EMPLID. This has generated about 5 000 queries in my system.

  Know that you are wandering in a very scary place here. There are some valid reasons for deletion in the scenes, but you should exhaust all other options, first.

  Paul

• Adding items to the multicolumn listbox and its headers

  How can I addEMS in multicolumn listbox and its headers?

  I don't see changes in CS4 is how to change the number of columns and headers to display.

  Thank you.

  Hi kingkai101,

  To configure headers, the columnTitles of the list box Properties attribute value an array of strings. To add a line, use the add() method of the ListBox to add 'something' for the first column of the row value, then the following columns are set using the value of the text of the element table [] subitems.

  I have attached a sample script. Hope it is informative.

  Jeff

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• Is it possible to have a common accessible file location for the main application in the sandbox and its extension app plugin

  I'm trying to launch an app on the app store for mac. The bundle of the main application and everything inside it is on sandbox.

  The main application Bundle identifier is com.xxx.core.app . The identifier for the internal Plugin Finder Extension application Bundle is com.xxx.core.app.extensions .

  Now the problem is the extension inner finder is also available in sand and trying to read a file written by the main application.

  The main application writes the file location depending on mac OS X, for example temp/var/folder/jv11743453495593/T/com.xxx.core.app

  But the internal Plugins try to read/var/folder/jv11743453495593/T/com.xxx.core.app/extensions

  Because of the different bundle identifiers, they have different containers.

  Can someone let me know how to limit the same application and its plugins to the same folder location. Does perform a work around for this problem.

  Hello yuktikapahwa,

  See the Sandbox Apple Guide under the ApplicationDirectory group container

  You must create a group that your container can access. I'm not 100% certain that this will work with extensions of Finder, but it seems the most logical place to start.

• I downloaded an application from my iphone and then deleted. Now when I open AppStore I purchased apps and its still there. How can I remove it from there though even I have no more app?

  I downloaded an application from my iphone and then deleted. Now when I open AppStore I purchased apps and its still there. How can I remove it from there even if I have no more app?

  The applications that you have downloaded will be available for re - download also a practice.

  Apps y cannot be removed, you can hide only.

  Read here: hide and expose the purchases made on the iBooks Store - Apple Support, App Store or iTunes Store

• I tried to open a bookmark and its opening in an active window, such as an image, not a separate tab or window. What is going on?

  I had problems with Firefox hanging (seems related to Flash on a particular Web site). During his last hours of troubleshooting, including on the phone with the assistance of my ISP, it was recommended I "Refresh" of Firefox. I've done it before, and I did it yesterday again. This morning I opened Firefox to my homepage (my ISP Portal), checked my email, disconnected from the email, this tab closed, open two other forums and Photobucket - three tabs open in the window - to post pictures and contribute to the discussions in the forums. Once completed, I've disconnected from forums and Photobucket, each firm separately tab, and then quit Firefox. (While in Photobucket, Flash has crashed several times... but this is not unusual with Photobucket in my experience. It's a different problem, I always deal with... but he immediately forgets...) As part of "Refresh" yesterday, I set Firefox to clear the cache and cookies and other files to quit.

  Later in the day today, I opened Firefox, portal of my ISP opened as usual and expected (my "Home page"). Sometimes, instead of close the window/tab, I just open a bookmark and it will open in the same window, but by replacing the previous window and its contents. I.e. the procedure normal functioning for me. You know, rather than having two windows open where I have to close one, I have just the bookmark opens instead of the original content of the window.

  Today (and it happened before today, but rarely), open the bookmark page as if it was a picture in the active window... otherwise said, my ISP Portal occupies about 3/4 of the window, but more on the left side of the window (not another tab or a window, but in the same window) is a thin view bookmark page. This new web page - quite foreign to the original page - has a scroll down bar, but can be made to fill the window... the previously opened web page acts as a barrier to the pleasure of the 'new' image/web page. While I can understand the right border of the "new framework" and drag it to the right, he still cannot push the 'old' web page of origin of the road... the old page reached a minimum limit and I get a split screen of two completely different websites mode contained in exactly the same active window.

  The 'new' frame has an 'x' at the top right, so I could close... but my question is, why it is opened in web page/window...how from a completely different company can two web pages from completely different organizations/companies/websites are the same active window in Firefox? I have... attached screenshots. And, oh yes, not to mention that the HOW and WHY, how can you prevent (or is the best thing to just right click and open in a new tab or window...?) Which is not always convince me... I am someone who needs to know WHY something happened that should not have happened. It drives me crazy when something strange happens and the 'solution' is to change MY behavior. (You know, like if YOU were the problem, but I need to change MY behavior Instead of correct what's wrong with YOU... When YOU could make all of the obsolete situation.)

  Thanks for everything you can suss out...

  You can check this bookmark in bookmarks (library) Manager and expand the details pane by clicking the button more.

  • https://support.Mozilla.org/KB/how-do-i-use-bookmarks

• have the icon to download helper with video up, I have until it clicks, dosnt download or convert a number appears next to the icon and its listed in the queue draft.exe

  I was able to load videos 26 then he stopped down. I checked the preferences, the version is 4.9.24, I can see that the video is listed next to the icon, when I drag the mouse over it.

  I support download icon, when the video is running. I click next to the icon and choose the game I want, on fast download I see it loads, but no dwhelper. dosnt download or convert a number appears next to the icon and its listed in the queue draft.exe

  There is a problem with DownloadHelper Firefox 36. They are working on a new version, you can download and help test this discussion page:

  https://groups.Google.com/Forum/#! Forum/video-video downloadhelper-5

• Retrieve text messages from old iphone with another carrier and its been reset?

  Is it possible to retrieve text messages from old iphone with another carrier and its been reset? I have an iphone 4 that was with att then I switched to tmobile and I reset it as I was planninging on selligg, but I face some legal issues and I was wondering if it was still possible to be able to retrieve these messages? I also have an iphone 4S that I used after that id like these old messages tmobile too and I am currently usin g an iphone 5 c If anyone knows or can help make em let me know please thanks

  If you have a backup of the 4 from iTunes or iCloud, messages can be in there.