Configuration profile options
Helloin 11.5.10
How to:
Configuration profile options
3 new system level profile in the section of iProcurement configuration values:
n POR: name of the proxy - name of the Proxy Server if the client has a proxy configuration
n POR: Port of the proxy - port of the Proxy Server if the client has a proxy configuration
n POR: file name of certificate CA - absolute path to ca - bundle.crt where all the
the names of certificates are stored
Thank you.
Hello
Go to--> profile--> system system administrator
Enter the name of the profile to what to look for and set the appropriate value at the Site or Application Level or level of responsibility or user level
HTH
Kind regards..
Tags: Oracle Applications
Similar Questions
-
Hello
Thank you for your initiative on the oracle community.
I love the community and wants to play an active role.
However, I see the discussions initiated by me in a separate stream of data/place rather than mix them in all the other debates.
is it possible to search all discussions posted by me only in one place?
Is it possible to configure the options so that only the answers to my questions will be displayed in the Inbox?
It used to work before, however, I subscribed to a few communities and my Inbox is bombarded with all the discussions. I read and try to answer on the other discussions, but it is difficult to keep track of discussion initiated by me?
Help, please.
Its there in your profile
-
The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP
Hello
Control Panel - SOUNDS - Audio peripheral devices configuration-manager
Make sure you write down the description and model double click top - tab drivers - write version. Now
Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.If your driver shows 06 you have the default windows and part of the question.
Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
Put them - right click on Reboot - RUN AS ADMIN -.Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
Just make sure that the version you have installed appears in the tab of the driver.Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html---------------------------------------------------------
After the updated driver.
Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
and show disabled devices - check your micro - highlight them, then lower right properties. Do
of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
and APPLY / OK changes.Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
is the RealTek Audio Manager, yours can be quite different name if you have one.How to activate Audio devices hidden in Vista
http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.htmlConnect one microphone, music player or other audio device to your computer
http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspxProblems with sound and audio or no sound - a Mr Fixit
http://support.Microsoft.com/GP/NO_SOUNDI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
My new Curve 9360 blackBerry smartphones won't let me open my profile option?
Hi, I'm new to these two forums and blackberry in general so I cry for a little help from someone who is a little more advanced than me!
I recently bought a Blackberry Curve 9360 and have since put it up to my tastes - well.
But recently, I've changed the sound profile to silent, I was in a meeting and now the blackberry won't let me open the profiles option at all (by that I mean real option in the main menu which allows you to select which sound profile to use [the option 'Sound and alert profiles']) and nor it will allow me to open it by clicking on the small speaker located on the search bar.
A friend showed me how to use "keep it Q" to change it, but every time I do this, it changes from Silent on vibrate only and nothing else...
So I was wondering if someone could help me out and explain how this menu option to get back so I can put the unit on the "Normal" profile (or there may be another shortcut to do?) or maybe an explanation as to why he stopped me to enter all of a sudden - the blackberry is less than a week!
Kind regards
Tom.
Have you tried a battery pull yet? If not, than give it a shot and let us know.
-
Need to PROFILE options in SQL query
SELECT ffvs.FLEX_VALUE_SET_NAME , ffvs.FLEX_VALUE_SET_ID , ffv.FLEX_VALUE_ID , ffv.FLEX_VALUE FROM fnd_flex_value_sets ffvs , fnd_flex_values ffv WHERE 1=1 AND ffvs.FLEX_VALUE_SET_ID=ffv.FLEX_VALUE_SET_ID AND ffvs.FLEX_VALUE_SET_ID=1012493 -- SCHEME_GL_OPTION AND ffvs.FLEX_VALUE_SET_ID IN (select FLEX_VALUE_SET_ID from FND_FLEX_VALUE_RULE_LINES where FLEX_VALUE_RULE_ID in (select FLEX_VALUE_RULE_ID from FND_FLEX_VALUE_RULES where FLEX_VALUE_RULE_NAME='MDS ZA Option' ))
I try to run the particular qyery of SQL to create the VIEW.
Concern:-he will return all columns of values associated with all the rules and count GL
-> I want to filter by running the or by using the PROFILE option so that he returned for a single RESP_ID.
It is anyway to use in creating in the QUERY view to pick up the only RESP_ID.
Hope I made clear in my question.
I agree with you people.
This table, I used fnd_flex_value_rule_usages to join the fnd_flex_values for responsibility according to the users want by passing the value.
No need to use the PROFILE option.
Thanks to all of you guyz.
-
Payroll ID must be passed automatically using the profile Options.
Dear all,
Please suggest for power condition.
I've created a new report of employee details where I need to go from the Payroll_ID per_all_assignments_f table.
We have more 7 payroll in our facility. These wages are set using per_security_profile_id possibility of responsibilities.
Thus, users attached to specific responsibilities should consider only their payroll in the payroll_id of the report parameter.
Case 1. How can I pass Payroll_ID parameter using the profile option.
Case 2. Security > Security profile > profile of payroll, Security tab, if you click on the check box "Show all wage masses" for security, how to pass all payroll_ids.
Thanks in advance.
Kind regards
Afzal.
Hi amal.
You should check the Pay_Payrolls_F view and not the table (PAY_ALL_PAYROLLS_F)
If you are checked from the backend, that define the correct responsibility (via fnd_global.apps_initialise) before trying the query.
See you soon,.
Vignesh
-
This printer is referenced by the printer profile option.
Hello
I'm trying to delete a printer in the Printers window and get this message:
"This printer is referenced by the printer profile option. You can't remove a printer that is referenced. »
I ran the first select statement to identify users with this printer in their profiles and allowed the printer from their profiles.
I ran the statement select second to identify all work planned to this printer and cancelled and postponed the job to another printer.
I then did some research and found the statement select third to find the games demand and moved in another printer.
I always get this error in profile. Where else can there is a profile that prevents to remove the printer?
SELECT fpovl. PROFILE_OPTION_NAME,
fpovl. USER_PROFILE_OPTION_NAME,
fpov.profile_option_value,
Fu.user_name
OF fnd_profile_options_vl fpovl,.
fnd_user fu,
fnd_profile_option_values fpov
WHERE fpov.level_id = '10004' - user level
AND fpovl.profile_option_id = fpov.profile_option_id
AND fpov.level_value = fu.user_id
AND fpov.profile_option_value LIKE '% et27m451% ';
Select
Fu.user_name,
NVL (conc.description, prog.user_concurrent_program_name) concurrent_job_name.
frvl.responsibility_name,
conc. Printer, conc.requested_start_date, conc.*
of conc apps.fnd_concurrent_requests,.
Apps.fnd_concurrent_programs_vl prog,
Apps.fnd_responsibility_vl frvl,
Apps.fnd_user fu
where conc.concurrent_program_id = prog.concurrent_program_id
AND frvl.application_id = conc.responsibility_application_id
AND frvl.responsibility_id = conc.responsibility_id
and conc.requested_by = fu.user_id
and conc.printer LIKE '% et27m451% '.
and status_code = "Q";
Select r.user_request_set_name, s.user_stage_name,.
c.user_concurrent_program_name, p.request_set_id, p.printer
of fnd_request_sets_tl r, fnd_request_set_stages_tl s,.
fnd_request_set_programs p, fnd_concurrent_programs_tl c
where p.request_set_ID = r.request_set_ID
and p.request_set_stage_id = s.request_set_stage_id
and p.concurrent_program_id = c.concurrent_program_id
and printer like '% et27m451% ';Please see these documents.
How to effectively remove an Oracle Applications printer [ID 370372.1]
Receive Error Message When you try to cancel the registration of a printer [ID 105260.1]
How to list the values in the Option E-Business Suite profile for all levels using SQLPlus [ID 201945.1]Thank you
Hussein -
Default values of profile options
Hello
Can someone help me please with this question.
The default values in the profile options stored in the database of the EBS?
Default values of profile options, I mean values of profile option on the new instance, after installation, before executing the installer of the instance.
Can you tell me the names of the tables to store that data?
I checked the tables FND_PROFILE_OPTIONS, FND_PROFILE_OPTION_VALUES and I see only that the tables store the current values of the parameters of profile options.
The intention is to report that will show the difference between the values of the profile options pending charges (before installation) and current values...
Thank you!!!Hello
According to my knowledge, there are NO such table that stores the default values (say seeded values) of the Options of the profile. _ but, to throw some light in your case, try to enable auditing of changes to data in the table that is required the tables FND_PROFILE_OPTIONS, FND_PROFILE_OPTION_VALUES (i.e., Enable audit before the changes of profile options and compare the audit with the change table)
Steps to enable auditing are:
1. enable the verification profile. (Requirements: activate Yes at the site level)
2. identify the name of the application to which audited table belongs. (App = Application Object Library)
3. turn on the check for the desired application.
4 create an audit group within an application containing a list of tables
audited.
5. specify the column names to be audited.
6. run the simultaneous audit programPlease refer oracle.anilpasssi.com for detailed steps on the verification of the data of the user.
Thank you
Naresh Thierry -
Error in BPA - the profile option 'DQM Match rule to look for' must be defin
Hello
We create the BPA for the invoice iReceivables.
After you have created the temple, we run the preview to test the template. During this time his giving the below mentioned error.
Kindly let me know how to proceed.
The profile option 'DQM Match rule to look for' must be defined with a matching rule. Contact your system administrator
Concerning
PAKERYou must set the profile option "DQM Match rule to look for".
FAQ about installation and usage of profile of DQM OCO Options and credit [565905.1 ID]
Bills presentation Architecture FAQ [ID 344350.1]Thank you
Hussein -
Hi all
Wat is meant by the PROFILE OPTIONS?
I doubt by setting profile options...
I do not find where is the profile option? And pls help me with the profile options...
GaneshHi Ganesh,
go through this link. You can find the basics.
http://download.Oracle.com/docs/CD/A60725_05/HTML/comnls/us/FND/adupapp.htm#aolpoThank you
KP
-
Necessary Advisor while creating the custom profile Options...
Hello
I am creating a custom profile option called «XX allow...» »
In the code, I want the list of the values yes / no, I come from in the code below.
SQL = "SELECT sense means, code lookup_code.
IN: visible_option_value: profile_option_value
OF fnd_lookup_values
WHERE lookup_type = 'YES_NO '.
AND view_application_id = 0 "
COLUMN = "CODE (*)" "
It's the YES_NO of research. The Lookup Code is O/N respectively.
If I use the code pasted above, it displays O/N in the front and also update the same thing in the back-end.
If I can replace the lookup_code sense, it shows, yes/no, and updates backend, with Yes/No.
But, I want to display Yes/No to the user of the screen, while, O/N to be updated in the back-end.
Can anyone suggest on how to do this?
Thank you.
Published by: Julie L on July 14, 2010 06:25Hello
Do not know what is the problem with your SQL query, perhaps the column alias, or perhaps you lack the quotes. Anyway, there are many options of profile in the system show the Yes/No list of values and the Y/N storage (it's what you want). I'd get one of them and would copy the query by changing just the guests. For example, this is the query for profile ' FND: Debug Log enabled ":"
SQL="SELECT MEANING \"Log Enabled\", LOOKUP_CODE into :visible_option_value, :profile_option_value from fnd_lookups where lookup_type = 'YES_NO'" COLUMN="\"Log Enabled\"(30)"
It will be useful.
-
in the output module 12.1.1 of the inventory, there is a profile option: allow costs of transfer of assets. How does it work?
Hello
According to the guidelines of the guide to the inventory...INV: allow the Transaction costs of goods
Indicates whether you can transfer part of a subinventory has expensed to a current location.
This profile can be changed at all levels.Basically, it is used in the transfer of expenses to Asset Subinventory... and handlaning customer returns
Suppose you have 2 sub inventories, say one of the subinventory is an asset and the other is a charge subinventory. First make you a fresh transfer of assets to subinventory subinventory. You then try to reverse the operation when transferring a charge to active subinventory. This profile option plays a major role in this scenario.
If this profile option is not set to 'Yes', it is possible to issue of an asset at a cost subinventory, but the question of an expenditure of active subinventory is not possible. Oracle inventory expects that consumption of material to the location of the expenditure.
Kind regards
S.P DASH -
Configure the Options of Communication IN profile
Hi all
How to set up the "To Domain" and "identity" from a provider like Staples?I see only two options available in eBuisiness suite profile R12 for cXML Communication.
(1) PO: cXML of the field
(2) PO: cXML of identity
My requirement is to set up the following in my outgoing cXML sent to the vendor.
...
< to >
< credential domain = "to_domain_default" >
< identity > to_identity_default < / identity >
< / credential >
< /pour >
...
@P
How the field of the credential = "to_domain_default" in the purchase order (PO) OrderRequest CXML be defined?
The user can set the values of - domain identity, but cannot set the To - domain identity.
Check the following
It is in fact an indication that details of the partner are not set correctly.
The XML gateway access set business partners.
Interview by the trading partner and confirm the details of trading partner, the following fields are defined for cXML as follows:
The fields must contain:
Transaction type - IN.
Sub - PRO transaction type
Standard code - cXML
ORDER type of outer Transaction-
Type of external Transaction Sub - REQUEST
Direction OF
Plan of access-cXML_OrderRequestSee Metalink Id: How the field of the credential = to_domain_default in Cxml OP be defined? (Doc ID 1367195.1)
-
Host application unwanted configuration profiles
Hello
I'm currently testing using profiles of host to apply some settings specific to my guests. I start simple - everything what I want the first attempt is to apply the settings of Core Dump.
I have:
- configured my host of reference with core dump settings
- the creation of the host of my reference host profile
- The option toggle the profile Configuration of 'Coredump in the network settings' are valid
- Attached to my target host and checked for compliance - this allowed to identify the CoreDump parameters as the failure of the observation only.
I apply the profile of host to my target host, MISTLETOE advised thus apply the CoreDump settings it will remove the configuration of the entire network of the host target (all vSwitches and port groups).
So - where I'm going wrong? I understand that the profile should apply CoreDump settings. I don't understand why he removes all network configurations too.
I would be grateful for the pointers that anyone can offer...
Hello
Please go through the link... Might give you the idea on the issue, that you face.
VMware KB: Coredump in profile host network breaks network configuration
-
TestStand 3.5, how to programmatically read the State of the configuration-> Options of Station immediately-> Goto Cleanup box sequence failure? How would you program this value?
Engine.StationOptions.AlwaysGotoCleanupOnFailure
Maybe you are looking for
-
How can you fix an iPod that won't boot to the top or either load I went to a local store to see if it can charge, but it cannot and it is running ios 9.3.3 32 g
-
Mini video does not display not showing
With the help of Skype 7.10.0.101 (later that day) Maybe Skype updated, but for some reason any small mini video that usually does not appear when someone has a webcam to the top most, just the usual widget that has the mute option and hang up. I tri
-
Name of the traditional model DAQ and SCXI-1530
Hi all I'm using Labview 6.1 and 7.1 of DAQ traditional. I'm working on a system with a data acquisition card (PCI-6052E) and several SCXI (1520, 1530) cards. The SCXI cards are installed correctly because MAX can detect all. I want to do a program w
-
I am using paint. When I paste something that I copied it out of all the distortrd
-
Windows updates cannot be installed error 80246001
I have automatic installation of the new updates. Updates could not be installed due to error80246001.All the safety devices are on. Please can I have these urgent updates installed. Thank you