Configurations of the EMU not applying does not consistantly

Similar Questions

• Restore the configuration of the AIP-SSM20?

  Hi there

  I have a small problem here - we are in the phase inupgrading of our Firewall to a set of 5510 with SSM10 to a set of 5520 with SSM20 - and I expected, it was quite simple just restore the current configuration of the SSM10 on the SSM20'- and weel - looks too so when I copy everything my server configuration ftp in backup-config and then load the backup current config with deletion - but when I look at by the After he was replaced in the configuration of the network?

  I use the version 7.04 (E4) the kernel he...

  The anyoine there have attempted to backup and restore the complete configuration - without problems?

  If I copy the restored configuration back and do a diff on them the difference lies in the service host section:

  2V2

  < !="" current="" configuration="" last="" modified="" wed="" jun="" 22="" 23:42:31="">

  ---

  > ! Current configuration changed the sea Mar 30 15:03:54 2011

  8 C 8

  < !    ="" signature="" update   ="" s573.0  ="">

  ---

  > !     Update of the signature S561.0 2011-04-20

  34 c 34

  < service="">

  ---

  > service host

  36 c 36, 38

  < host-ip="">

  ---

  > host-ip x.x.x.42/24,x.x.x.1

  > host name of fw_pri Internet service provider

  > telnet-option enabled

  a 37, 40, 54

  > dns primary server enabled

  > address 8.8.8.8

  > output

  > dns server secondary disabled

  > dns server service disabled

  > output

  > time-zone settings

  > offset 60

  > standard time - GMT + 01:00 area name

  > output

  > ntp-option enabled-ntp-no authenticated

  > ntp server - 193.162.145.130

  > output

  > automatic update

  > cisco-server disabled

  is this a known issue?

  best regards /ti

  we are in the phase inupgrading our firewalls from a set of 5510 with SSM10 to a set of 5520 with SSM20 - and I expected it was quite simple just to restore the current config from the SSM10 on the SSM20'es

  Fix. You should be able to restore a backup of configuration of the sensor of the AIP-SSM-10 on a module of sensor AIP-SSM-20 without much trouble, although hardware-wise that the AIP-SSM-20 are more able/powerful, there is no difference in the interface (or quantity) naming conventions, etc. that was displayed in the configuration.

  I expected it was quite simple just to restore the current config from the SSM10 on the SSM20'es - and weel - it also looks so when I first copy the config from my ftp-server to the backup-config and then load the backup to current config with erase - but when I afterwards look in the network configuration it has been replaced?

  I'm not sure that I followed exactly the procedure that you tried, but you should be able to back up the current configuration of the AIP-SSM-10 sensor module to a remote server, and then copy from the remote server to sensor AIP-SSM-20 module. Example:

  AIP-ssm-10 # copy current config

  AIP-ssm-20 # copy current-config /erase

  NOTE: The parameter/erase applies only to the current config. If specified for the current-configdestination, the configuration of the source is applied to the default configuration of the system. If it is not specified for the current-configdestination, the configuration of the source is merged with the current config. Maybe that is part of the confusion?

• How do I know if my router has been compromised if a hacker does not any change in the configuration of the router?

  How do I know if my router has been compromised if a hacker does not any change in the configuration of the router?

  Do you know how to access the Linksys configuration screen?  Click Administration.  You should be able to access the logs from here.

  What happens if they have an older linksys router?

  

  Click on the Windows "Start" button and select "All programs." Click on "Internet Explorer" to open a web browser.

  Type "192.168.1.1" in the address text box and press "enter." This IP address is the default value for a Linksys router. If you have reprogrammed the router to have a different IP address, enter your IP address instead.

  Click the log tab

  model # here

  http://homesupport.Cisco.com/en-us/support?ICID=global-header-support-link

  192.168.1.1 is an IP address that is normally used by the routers broadbandfrom Linksys.

  If the router has an IP 192.168.1.1, you can connect by opening a Web browser and visiting

  http://192.168.1.1/

  This allows to connect you to the console of the router administrator and access its configuration screens.

  http://compnetworking.about.com/od/routers/g/192_168_1_1_def.htm

• I've set up another configuration of TCP/IP, but it does not connect. I need to access the 3 different machine networks. Any ideas?

  I've set up another configuration of TCP/IP, but it does not connect. I need to access the 3 different machine networks. Any ideas?

  original title: alternate tcp/ip

  If by "alternate TCP/IP configuration" you mean the settings on this screen--> http://tinyurl.com/42kbqqz, then, to quote Inigo Montoya, "you keep using that Word. I don't think it means what you think it means. »

  The 'alternative' configuration settings tab, if you select "IP address private auto" (APIPA) or "specified user" is only used IF "obtain an IP address automatically" is set on the tab 'General' (http://tinyurl.com/8p9hn) AND the adapter cannot get an IP from a DHCP server.

  Most cable networks use a DHCP server to automatically assign IP addresses.  In this case, just plug your Ethernet cable and you're automatically configured and connected.

  If the problem is that your network requires a static IP address (that is, they use a DHCP server to automatically assign IP addresses), you will need a third-party network settings manager.  If you have an IBM (Lenovo) ThinkPad, you can use "Dial-up connections." IBM Otherwise, see this Google search (I have no experience with any of the applications shown, so I can't comment about them): http://www.google.com/#sclient=psy&hl=en&source=hp&q=network+configuration+switcher&pbx=1&oq=network+configuration+switcher&aq=f&aqi=g-v5&aql=&gs_sm=e&gs_upl=23l1333l1l1599l12l8l0l0l0l5l278l1344l0.7.1l8l0&bav=on.2,or.r_gc.r_pw.&fp=74e371c96a48f4b&biw=1024&bih=649

• My cd rom device does not work because its configuration in the registry is damaged, (error Code 19).

  My cd rom device does not work because its configuration in the registry is damaged, (error Code 19). Tried all the easy solutions (update - was active), any ideas? Thank you

  Hello

  ·         What is the accurate and complete error message?

  ·         You will remember to do recent changes on the computer before this problem?

  I suggest you follow the steps mentioned below:

  Method 1:

  Race fix from the following link and check if the problem persists:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  If the previous step fails, follow the steps in the link:

  http://support.Microsoft.com/kb/929461

  Method 3:

  If the previous step fails, follow the steps in the link:

  http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx

• Error message: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged" and dvd burner does not

  Original title: dvd burner does not work can not load the driver

  I get this message "windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.

  Can someone help me?

  Hi Garry_x,

  1. were you able to use the DVD burner before with no problems?

  2. you remember to make changes to the computer recently?

  This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  You can check out the following link and check for the resolution:

  http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx

  You can also read the following article and check if it helps:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

• Vista does not recognize my dvd ram drive, or a drive__Windows hard usb cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Error message when you open Device Manager and clicking on the dvd player. Drive does not appear in the window 'computer '. Max_devices downloaded, but it couldn't fix the problem.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Update of the applications of "Apply" blackBerry Smartphones does not work

  I have a Blackberry Storm.  In the desktop software, I select the Application Option.  In the screen of the Application it says that I have to update the kernel.  I select it.  When I press the button 'apply' nothing happens.  When I get the desktop software it tells me that I have not updated all my applications.  Why the 'Apply' does not work?  Desktop Sotware is 6.0.1.18.  I use Windows 7.

  I really don't think worries of Blackberry.  I know not why this Forum exists since Blackberry doesn't seem all repair, place on it.  I don't know that they read all this.  I sent the following to Verizon to convey my feelings ONLY.  Verizon put me right back in the loop of Blackberry Web.  Hope you have better luck.  I'm heading to another provider.

  __________________________________________

  To Verizon:

  First of all, I don't need help. I send you just at this address because I have no idea who to send it to who would care. Last year, I bought a Blackberry Storm at Verizon Wireless and to this day, I hate it.

  I'm just a lonely individual (NOT corporate) and by looking for any kind of help, I determined as soon as they don't care unless it is company.

  I have all the typical problems of the Blackberry plus many other problems. Some problems have been on the Forum and never resolved.

  Here are the problems that continue with my phone:

  -Constantly having to pull the battery to recover memory.

  -Battery requires a draft because of many blockages.

  -Request for changing the settings of Blackberry have nothing change.

  -Alerts such as alarms and applications ringing with no way to silence (all ALERTS OFF).

  -Voice dialing does not recognize name if the contacts name.

  -Applications to the daily updates.

  -office takes forever to connect.

  -office says that it is a necessary kernel update that cannot be selected for the update.

  -No way to search in the calendar.

  -Too little Blackberry allows applications to exist on the device.

  -Phone OS has never had an update to fix anything (that I know).

  -Touch is impossible!

  Again, I DO NOT ask for help. I want someone to know RIM, why I, like many other non-corporate people, will move to the iPhone when my contract on the Blackberry is up this coming June. If RIM maintains this, companies will soon do the same.

• USB 3 doesn't work does not Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  ASUS sabertooth z77 motherboard, bios updated. USB 2 USB 3 does not work. Have uninstalled root hubs that show problems and restarted the computer, do not solve the problem, still getting the "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "message under properties. Specific location of the hub of the problem: ASMedia USB 3.0 eXtensible Host Controller - 0096 (Microsoft).

  Please notify. If it is a regedit fix, please help with details. Thank you!

  When I rebuilt my system, I went step by step in reinstalling the software.  I understand that better, my usb problems related to Asus motherboard utilities.  These are not entirely compatible Windows 8 and introduce problematic drivers.  Finished to start my Acronis True Image boot USB and backup of backup image of this morning.  Problem solved.

  Staying away the Asus utilities for now... btw, Asus technical support on my problems was totally useless, even if the code 19 errors point to hardware problems, which are covered by the guarantee.

  If you use the Asus utilities, you may be able to rebuilt without them...

• apply the filter command button does not

  Hello experts, I have the code to apply the filter of order button below, but when I click on the command button, it runs under code but works.   Array is not be filtered:

  {} public void applyTableFilters (ActionEvent actionEvent)

  FilterableQueryDescriptor qd = (FilterableQueryDescriptor) myTable.getFilterModel ();

  QueryEvent queryEvent = new QueryEvent (searchResultTable, qd);

  myTable.queueEvent (queryEvent);

  AdfFacesContext.getCurrentInstance () .addPartialTarget (myTable);

  }

  < af:commandButton text = "ApplyFilter".

  ID = "applyFiltersCB" styleClass = 'blue '.

  actionListener = "#{viewScope.myBean.applyTableFilters} '"

  Binding = "#{viewScope.myBean.applyFilterCB} '"

  immediate = "true" >

  < / af:commandButton >

  < af:table value = "#{bindings.myList.collectionModel}" var = 'row' "

  Rows = "#{Bindings.myList.rangeSize} '"

  emptyText = "#{bindings.myList.viewable?" "{'No RECS found': 'Access Denied.'}".

  fetchSize = "#{bindings.myList.rangeSize} '"

  disableColumnReordering = "true" rowBandingInterval = "1".

  inlineStyle = ' height: 400px; "

  filterModel = "#{bindings.myListQuery.queryDescriptor} '"

  queryListener = "#{bindings.myListQuery.processQuery} '"

  filterVisible = "true" varStatus = "vs."

  selectionListener = "#{viewScope.myBean.currentSelectionListener} '"

  rowSelection = "#{viewScope.myBean.rowSelectionMode} '"

  ID = "t1".

  Binding = "#{viewScope.myBean.MyTable}" >

  < af:column sortProperty = 'year' filterable = "true" sortable = "true".

  shortDesc = 'AnnΘe Prg'

  headerText = "Year" Prg"id = 'c4' >

  < af:outputText value = "#{row.yearCode}" id = "ot6" / > "

  < f: facet = name 'filter' >

  < af:inputText label = "" id = "it1" shortDesc = "Prg Yr Filter" "

  value = "#{vs.filterCriteria.yearCode} '"

  maximumLength = "5" >

  < / af:inputText >

  < / f: facet >

  < / af:column >

  ......................................

  < / af:table >

  Appreciate any help.

  Finally it worked.    The question is the table PPR using backing bean does not display the filtered data rather than it shows full data.  If I use UI PPR, then apply filter method works very well.

• I can't get Adobe Lightroom updates to 6.0.1 to 6.3.  I get the update of the message U44M2P28 error does not apply.  Can you help me solve this problem?

  I can't get Adobe Lightroom updates to 6.0.1 to 6.3.  I get the update of the message U44M2P28 error does not apply.  Can you help me solve this problem?

  Would you uninstall Lightroom and restart your computer, and then please follow mentioned below as follows:

  1. first install Lightroom 6.0 from the link below:

  Download Photoshop Lightroom

  2. upgrade to Lightroom 6.3 using the link below:

  http://blogs.Adobe.com/lightroomjournal/2013/06/keeping-Lightroom-up-to-date.html#lrcc2015

  ~ Sarika

• I converted the text to the shape in illustrator and I try to apply a dotted around the shape; However, it does not work.

  I converted the text to the shape in illustrator and I try to apply a dotted around the shape; However, it does not work. Maybe I'm missing a step? Any suggestions?

  

  The settings that you should should work. I agree with sisham, to keep things simple and only put 5 in the first 2 fields, or your H will resemble each other.

  

  Now, you must have something else, and I suggest you select the element and to dissociate in the appearance menu > clear appearance. Then apply the dotted line.

  If you can post your file, am sure we could find what is worrying, but my guess is you have your dashboard applied, and which is overridden by a stroke applied to the group or level of the layer and dashboard you

• This is the error I get when trying Adobe Premiere of 13 elements of the configuration.  ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Premiere Elements.

  This is the error I get when trying Adobe Premiere of 13 elements of the configuration.  ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Premiere Elements.  How to work around this issue and get this downloaded.

  Lisa, please try of products download Premiere Elements | 10, 11, 12, 13 and let us know if you need help with this.

  Atul_Saini

• Storage Array Type Config path: ATAS VMW_SATP_SVC does not support the configuration of the path on ESXi 5.0 u1

  Hello

  Below for the output of my blade IBM HS22., are there any problems with the configuration of the path.

  List of paths esxcli storage nmp
  SAS.5005076b08b7aaa4 - sas.a9501097faba7a - naa.600508e0000000007abafa971050a900
  The Runtime name: vmhba0:C1:T1:L0
  Feature: naa.600508e0000000007abafa971050a900
  Full device name: FREE Serial Attached SCSI (naa.600508e0000000007abafa971050a900) drive
  Group status: Active
  Table priority: 0
  Storage Array Type Config path: ATAS VMW_SATP_LOCAL does not support the configuration of the path.
  Path selection policy path Config: {current: Yes; favorite: Yes}

  FC.2fff0000c900009f:2ffd0000c900009f - fc.500507680100 b b 680 680:500507680130 - naa.60050768018105afc000000000000df0
  The Runtime name: vmhba2:C0:T3:L2
  Feature: naa.60050768018105afc000000000000df0
  Full device name: disk of IBM Fibre Channel (naa.60050768018105afc000000000000df0)
  Group status: Active
  Table priority: 0
  Storage Array Type Config path: ATAS VMW_SATP_SVC does not support the configuration of the path.
  Path selection policy path Config: {current: Yes; favorite: Yes}

  Kind regards

  Surya

  Hi Surya,

  No, it's not any problem with the configuration of your path.

  It only means that this policy does not allow additional configuration.

  I.e. with fixed NMP, you would be able to configure a preferred path allowing you to manually distribute the i/o load.

  Your current configuration does not offer this option.

  Kind regards

  Ralf

• How to check the system configuration of the SX20 if the touch screen and the remote control does not work

  Hello friends, would like to know how can we access/check the system configuration of the SX20 if we not touch and remote control or they are not in working condition.

  I think that we can check this Switch interface, but unfortunately, I don't have access to the local switch right now.

  Hello

  option is to have access to the local switch and run "show cdp neighbors detail."

  or

  Connect the mobile to PC/computer LAN, run tftpd32 with affected DHCP pool. Then you can login to get the config.

  regds,

  Aman