confusion on the default settings of the territory.

Similar Questions

• How to set default settings for the DJ D1660 printer in OS Lion

  I need set the defaults on my DJ D1660 on iMac with Os Lion, so that others do not print in color accidentally - I want to like the default to be gray, fast printing. I put the defaults in CUPs, but they do not appear in the default settings specified in the printer dialog boxes, which is always color and normal printing. After 45 minutes talk to Apple, today they concluded that default values should be laid down in HP software, but the software does not give you anywhere the abilty to set the default values!

  I was able to define the default behavior of printers in each printer and computer I've owned or worked on the past 25 years - this is a trivial question in Windows for example - but am confused by HP and Apple. There must be a way!

  Help, please.

  OK, it worked in 10.5 and earlier versions, but I have not tried 10.6 or 10.7:

  -Printing something with the printing mode that you want to lock

  -Go to ~/Users/yourusername/Library/preferences.

  -Choose the com.apple.print.custompresets.forprinter. [yourprinter] .plist

  -Press command - I

  -On the window that appears, check the box next to "Locked" lock file

  -Close all windows and test

• Switch Cisco 2960/3560 = > recovery password and default settings with the button Mode

  Hi Experts,

  I have some confusion with the button Mode with cisco 2960/3560 switches.

  I read on many forums and articles, but where things are not clear.

  a place given 3 seconds and somewhere is given 7 or 10 seconds.

  Qus1), what is the exact time to press/hold Mode button to perform two following tasks:

  A. password recovery (according to my knowledge 3 sec) good or bad?

  Configuration of the switch (start + run) would be safe

  After the recovery of password? Yes or no

  B. factory default (according to my knowledge 10 dry) good or bad?

  I'm afraid, because if I press mode button more than 3 seconds, then

  It will delete any configuration of cisco switch. Yes or no

  Qus2) I want to recover the catalyst 2960/3560 switch password without

  Start/run configuration to lose. That is my main concern.

  Please tell me how to do this, what will be the time keeping Mode buttom

  in a few seconds?

  Qus3) which means this line

  "If the password recovery mechanism is disabled in switch

  then you will lose all the config.

  This sentence has been given on this forum url

  https://supportforums.Cisco.com/thread/140848

  KS

  Attach a terminal or PC with terminal emulation (for example, Hyper Terminal) port console switch.

  Use the following terminal settings:

  • Bits per second (baud): 9600

  • Data bits: 8

  • Parity: None

  • Stop bits: 1

  • Flow control: Xon/Xoff

  Note: For more information on the wiring and connection of a terminal to the console port, refer to connecting a Terminal to the Console Port of Catalyst switches.

  Unplug the power cable.

  The power switch and take it to the switch: command prompt:

  2900XL, 3500XL, 2940, 2950, 2960, 2970, 3550, 3560, and 3750 switches of the series, to do this:

  Press and hold the mode button located on the left side of the façade, while you reconnect the power cable from the switch.

  2960, 2970

  Release the Mode button when the SYSTEM LED flashes orange and then turns green. When you release the Mode button, the SYSTEM LED flashes green.

  3560, 3750

  Release the Mode button after about 15 seconds when the SYSTEM LED turns green. When you release the Mode button, the SYSTEM LED flashes green.

  The system was interrupted before the flash at the end file system initialization

  loading the operating system software:

  flash_init

  load_helper

  boot

  switch:

  Run the flash_init command.

  switch: flash_init Initializing Flash... flashfs[0]: 143 files, 4 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 3612672 flashfs[0]: Bytes used: 2729472 flashfs[0]: Bytes available: 883200 flashfs[0]: flashfs fsck took 86 seconds ....done Initializing Flash. Boot Sector Filesystem (bs:) installed, fsid: 3 Parameter Block Filesystem (pb:) installed, fsid: 4 switch: !--- This output is from a 2900XL switch. Output from !--- other switches will vary slightly.

  Run the load_helper command.

  switch: load_helper switch:

  Question the dir flash: command.

  Note: Be sure to type a colon ":" after the dir flash.

  Appears in the file system of the switch:

  switch: dir flash: Directory of flash:/ 2    -rwx  1803357                  c3500xl-c3h2s-mz.120-5.WC7.bin !--- This is the current version of software. 4    -rwx  1131                     config.text !--- This is the configuration file. 5    -rwx  109                      info 6    -rwx  389                      env_vars 7    drwx  640                      html 18   -rwx  109                      info.ver 403968 bytes available (3208704 bytes used) switch: !--- This output is from a 3500XL switch. Output from !--- other switches will vary slightly.

  Type rename flash: flash: config.old config.text to rename the configuration file.

  switch: rename flash:config.text flash:config.old switch: !--- The config.text file contains the password !--- definition.

  Issue the boot command to boot the system.

  switch: boot Loading "flash:c3500xl-c3h2s-mz.120-5.WC7.bin"...############################### ################################################################################ ###################################################################### File "flash:c3500xl-c3h2s-mz.120-5.WC7.bin" uncompressed and installed, entry po int: 0x3000 executing... !--- Output suppressed. !--- This output is from a 3500XL switch. Output from other switches !--- will vary slightly.

  Enter "n" at the prompt to abort the initial configuration dialog box.

  --- System Configuration Dialog --- At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Continue with configuration dialog? [yes/no]: n !--- Type "n" for no. Press RETURN to get started. !--- Press Return or Enter. Switch> !--- The Switch> prompt is displayed.

  At the switch prompt, type en to enter a mode.

  Switch>en Switch#

  Password recovery

  Type rename flash: config.old flash: config.text to rename the configuration file with its original name.

  Switch#rename flash:config.old flash:config.text Destination filename [config.text] !--- Press Return or Enter. Switch#

  Copy the configuration file in the memory.

  Switch#copy flash:config.text system:running-config Destination filename [running-config]? !--- Press Return or Enter. 1131 bytes copied in 0.760 secs Sw1#

  The configuration file is now reloaded.

  Replace the current passwords that you do not know. Choose a password with at least one capital letter, one number and one special character.

  Note: Replace passwords that are required. You must crush not all passwords listed.

  Sw1# conf t !--- To overwrite existing secret password Sw1(config)#enable secret !--- To overwrite existing enable password Sw1(config)#enable password !--- To overwrite existing vty password Sw1(config)#line vty 0 15 Sw1(config-line)#password Sw1(config-line)#login !--- To overwrite existing console password Sw1(config-line)#line con 0 Sw1(config-line)#password 

  Write the running configuration in the configuration file with the write memory command.

  Sw1#write memory Building configuration... [OK] Sw1#

  For factory reset:

  do not give under the control of factory reset

  Switch#copy flash:config.text system:running-config

  can I copy the running configuration to Flash

  Switch flash running-config #copy:

  Destination file name [running-config]?

  Building configuration...

  [OK]

  Switch #copy running-config startup-config

  Name of destination file [startup-config]?

  Building configuration...

  [OK]

  Review the link for more information below

  http://www.Cisco.com/en/us/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

  Please note the useful messages.

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

• I restored Firefox to its default settings, but the slowness, crashing and nonresponse are not resolved

  Hello colleagues-Firefox users.

  I followed the Commission indicated in the Support article on the slow, crash, etc. by restoring Firefox to its default settings. But the problems go away. The remains of the slow browser and still gives me error messages on a non-compliant script or plugin and crashes. To make matters worse I don't see the menu on the top tool bar items, I was so used to using, such as file, editing, display, etc.. I very often used the display menu to zoom on texts that are too small for me to read. Now I can not do. I tried to drag icons in the menu on the upper right of the page on the top tool bar above the address bar, but it is not the same thing as what I used to use before, and there is no File, Edit, View, tools in the menu icons. So now I see my g-mail Inbox in tiny little characters. I tried to use the Magnifier suggested in the troubleshooting of support page, but it's too heavy so I gave up.

  Would someone kindly please help me with these questions? Thank you much in advance.

  Kind regards
  Tom Graciano (globmart)

  If the zoom is your problem so just try to use the keyboard.
  Hold down the control (Ctrl) key + "+" to zoom in any window.
  Otherwise if the crash occurs suddenly so just try to uninstall and reinstall Firefox with the update. You brought a lot of changes manually, it might create problem. So reinstall once and check whether it is at your service.

• Restore the default settings doesn't work is not because of the sweetpack.

  Somehow, a toolbar called sweetpack was installed on firefox. I tried to remove the addon via the windows uninstaller, but it still appears in the addon of firefox even handler after restarting windows. the addon is blocked on firefox, but there is no way to turn it off. Then, I tried to restore the default settings, but firefox get toward the top of the box to "restore the data from the old" who comes chugged away in an infinite loop.

  I just looked at the picture and note that you have TopArcadeHits which is another embarrassing. Read the threads related to my last post.

  change More info / links

  • "my last post" 964290 # 454218 answer including the related action items
    • a long thread and informative 960863/issues/960863
  • "Waka_Flocka_Flame" 's post on anti malware software /questions/964290 #answer - 453976
    • including the link to ADWCleaner
    • an alternative link http://www.bleepingcomputer.com/download/adwcleaner/

• Satellite A210-17R: power management automatically changes to the default settings

  Hello

  I have a Satellite A210-17R with Win XP SP2. Works pretty well, except for the power management settings (they might call energy Mgmt., I don't know, cause Im using a German language version, so all the terms I use are translated from German).

  I am connected with my user name with administrator rights, then this isn't the common thing, where you cannot change the power mgmt based on your user status. I can actually change any settings (when disable hard drive and screen and so on, knowing what to do when the lid is closed), but somehow she maintains herself reset default settings. I tried to remove all the profiles of power except one, but still... keeps resetting. Ive tried to save the changes, eteinde, save the settings and the mashine completely but anyway even if not instantly (and I did not understand a pattern yet) it maintains the default reset.

  Its very annoying cause, I would leave on my laptop at night to download stuff, but I want to close the lid during the night and when I open the lid again in the morning, the day before on.

  Any suggestions?

  Hello

  As much as I know Satellite A210 isn't always supported WXP. What GST version you have installed on your A210?

  Until that Toshiba does not offer tested WXP tools and utilities, you can face more similar questions. In any case, you can try to use Windows XP Home edition power options and check the functionality. Maybe it will work well.

• Want 7645: Changing the default settings on HP 7520

  For reasons that I don't understand, after a long telephone help, user HP Support told me install the HP Photosmart 7520 driver for my printer HP Envy 7645.  It works fine EXCEPT that whenever I want to use to print several pages I have to change the settings so that I can print 2 Facer and on plain paper.  Can you give me instructions step by step to make these my 7645 default settings of the printer?  Thank you very much.   KJH

  Hi @khittelm,
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have question on how to set the properties of the default printer. I'll be happy to help you.

  Press start
  In the type of white box "devices and printers".
  Right-click on the printer
  Select the printer properties
  Change the setting you need.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Uninstallation of MySQL or reset the default settings (advanced question)

  I am trying to install an application that is based on the MySQL server. I've been installing other programs and for security reasons, I changed the password for the server parameter access to MySQL. It worked well for other applications I installed but prevents me from installing the application provided by the ReadyNAS, it seems, they rely on the default settings to install correctly. After some reflection, I just decided to stay with the application provided through Netgear, but I need to reset everything in MySQL. I tried to uninstall the program, but the removal process leaves the databases behind, which means when I reinstall MySQL, he concludes that even stored setting user as before. I need to know if anyone knows how to do a clean install of MySQL or can help me identify all the extra files I need to delete through SSH to complete uninstallation by OS6?

  Hello Newsat11,

  Thanks for the reply. You can close it by clicking on accept Solution probably the answer you did since I think has a solution that you took.

  We appreciate your contribution to the community, please do not hesitate to post questions, you want to ask and everything you think that deserves to be shared.

  Kind regards

• Reorganize all the folders and subfolders manually, after the reboot, changes were not saved and return to the default settings

  I arranged recently manually all the folders and subfolders by list and alphabetical order, but when I turned my computer off and turn it back on, it goes back to the default settings.  I need to know what setting I need to change to avoid it too reset and also how to organize all the files and subfolders both (list and alphabetical order) because it is very long and fustrating to go into each folder and do it, can you help me with a quick and simple solution?

  * original title - arranged manually all the folders and subfolders by list and alphabetical order, but when I turned my computer off and turn it back on, it goes back to the default settings *.

  Hi Lilian13,

  You can read the following article and check if it helps:

  Organize, sort, or group your files

  http://Windows.Microsoft.com/en-us/Windows7/arrange-sort-or-group-your-files#section_1

  Hope this information is helpful

• OfficeJet 6700: change the default settings of the printer

  I want to change 'Gray levels' to 'Off' to 'Black ink only' and 'Output quality' to 'Normal' to 'project '. I went to the Panel of control permanently change my default settings of the printer, but whenever I try to print, the parameters began to 'Off' and 'Normal '.

  Hey @arican55,

  I see you have some problems with the definition of default values on your PC of Windows 10 when printing to your Officejet 6700 Premium e-all-in-one printer. I can help you with that.

  To clear all default settings:

  1. If the printer is connected via USB cable to your PC, delete.
  2. In your search type in printers bar and open devices and printers.
  3. Right-click on any icon of your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons of your printer listed.
  6. If you removed the USB cable, connect. If this is not the case, click on add printer and follow the prompts to add a print to your printer queue.

  Please let me know the results after following the above. If you can set the default values, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Can I change the default settings such as the number of seconds that each picture is displayed in windows movie maker?

  Can I change the default settings such as the number of seconds that each picture is displayed in windows movie maker? Now she comes up a 7 seconds... I would like to change it to 6 seconds.

  Hello

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - check the sounds of the addition in the left menu and others on the
  main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker help & how-to and Forums are good sources of information:

  Windows Live Movie Maker that works in Vista and Windows 7
  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-Help-Center?T1=T3

  Official Support of responses - Movie Maker Forums site-
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?tab=no

  ====================

  These might help:

  Getting started with Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Import video from a videotape

  Get a movie in Windows Movie Maker

  Make a movie quickly in Windows Movie Maker (AutoMovie)

  Publish a movie in Windows Movie Maker

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Auto 7 d back to the default settings

  Here's an interesting problem:

  I have a 1 year old factor refurbished EOS 7 d, I use exclusively for that I generally shoot at 24 fps video recording...

  Recently (ON ALL MODES of shooting), it automatically returns to stop a minute and 30 frames per second. (he may return other default settings, but nothing that effects my shooting or that I noticed.)

  Whenever I turn it on, I have to reset the fps and the downtime (OFF or 30 minutes, or other) - but then the next time that I turn it on, it has reverted to stop a minute and 30 frames per second.

  Also, sometimes even without turning the camera off, it will be automatically for 1 minute cut and turned off automatically.

  Note once again, that it does on EACH mode, the same photography and custom modes.

  A friend told me to try to DELETE all custom... functions but when I try it, I get a message that says:

  "cannot delete custom functions.

  Select a different shooting mode from C1, C2 or C3.

  The strange thing is that I get the same message in MANUAL mode or any other mode.

  I also tried to remove the battery from the clock, but the only effect that had, is that I had to return the date and time.

  Note: Firmware is the 2.0.5

  Help!

  -Pete aka Todd00009

  Given you've done everything right and this continuous thing to lose his mind... the only thing I can think is that your clock battery is dead.   If you haven't already done so, try to replace a new battery and see if the problem persists.

• Change the default settings on scanner

  How can I change the default settings of the scanner on my HP LaserJet M1212 MFP?

  I'm sorry you have a problem with the settings of the parser.

  You can go into your service menu and change the RESTORE DEFAULT settings.

• My 2 year old somehow gave a password on our computer and now we can get in our office. Without having to return to the default settings, anyone have a suggestion on how to solve this problem?

  My 2 year old somehow gave a password on our computer and now we can get in our office.  Without having to return to the default settings, anyone have a suggestion on how to solve this problem?

  If you have a different user account with administrative privileges, Panel you can connect that account and change the password of your account of origin of the user accounts applet in Control Panel. If you do not have another account like this set upwards or that you do not have the password which you will need to log on to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.

  In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.

  MS - MVP - Elephant Boy computers - don't panic!

• NH-1005 ver 2.2 hub allows you to restore the default settings

  OK, I have a worm hub 2.2 NH 1005 that I used a little more than six months, and I need your advice on restoring the default settings.

  the web-based configuration page can be accessed through 192.168.2.1 on IE, but my step son was trying to fix the nat definition for its xbox 360 (not so hard to do...) and changed the settings under remote management to turn off. now, it is not possible to connect to access based on the Internet web page.

  is there another way? Is there a restore defaults button in the web page, but no button or other basis on the hub itself. any advice, other than to get rid of it and replace?

  So in this case you should check the settings of your DSL modem. Like most of the DSL modem has a built-in DHCP server. Then maybe you lose connectivity to your modem DSL itself.

  As your HUB is a dumm device and it dosent have any parameters, or you can reset your HUB. Only, you can make a normal feeding cycle and which will not solve the problem.