Connected BBM App denied

Similar Questions

• Is an application connected BBM still works when BIS expires?

  Hello

  I'm working on a connected BBM app. My application depends on BBM to work. Therefore, I use the dependency approach "proxy". If BBM does not work, my application should not work either.

  I have a doubt in this regard.

  Let's say that we have achieved this scenario:

  Install us and launch an application connected with BBM and we register successfully with BBM. At this point the app works fine.

  We are a map of talk. BIS, expires at the end of the month. BBM surveys doesn't work anymore.

  Since you are already registered with BBM, your connected BBM app will work even if BBM does not work?

  Thank you so much

  Concerning

  There is no API to check if BBM 'works' as far as I know.

  As peter says, you can check the status of the coverage and if BIS/BES is not available then do run your application. The only problem with this approach is that the connection cannot be completely stable and you could try to detect the availability of the BIS/BES at a time where there is a drop of connection.

  You could solve this problem with a little reflection well. It is not that big of a train smash.

• WiFi doesn't connect properly & apps not updated by wifi

  Mr President

  When I update 9.3.2 wifi doesn't connect properly & apps not updated or installed via wifi and battery low.icloud does not

  gsuryakiran wrote:

  Mr President

  When I update 9.3.2 wifi doesn't connect properly & apps not updated or installed via wifi and battery low.icloud does not

  Follow the 3R - if this does not solve your problem proceed

  Troubleshooting of user is:

  1. reboot, IE power off / on,.

  2 reset http://support.apple.com/kb/HT1430,

  3. restore the backup, restore as a new device. http://support.Apple.com/kb/HT1414

• Unable to connect to App Store since El Capitan

  Cannot connect on App Store on 10.11.3.  The computer has been restarted.  IOS connect on App Store is not a problem

  Same problem for me

  "An unexpected error has occurred all by signing".

  "Your device or computer could not be verified. Contact technical support for assistance. »

• An error occurred while polydioxanone interface area connection access is denied.

  Hey Microsoft,

  It comes to Raja, while I use the santely system, I got follwing error.

  "An error occurred during polydioxanone interface area connection access is denied."

  I use mission of Xp to windows that it is connected on the field.

  please me like this what should I do?

  Hello Rajas_king,

  Your Windows XP problem would be better suited in the TechNet forums since you are in a domain environment.
  Click here to transfer your question in the Windows XP forums on TechNet.

  Sincerely.

  Marilyn

• Connected HP app for IPAD

  How can I download the HP drive connected to my IPAD app? I tried but can't find IT, just for the IPhone.

  Hello SBeit,

  You are able to find the connected HP App for the iPhone yet? In my view, that the iPhone app and iPad are one and the same.

  But I had been informed that the App has been abandoned there is abandoned and is no longer available in iTunes.

  The products accompanying preinstalled or installed before the app was pulled, should always work. But it can now be downloaded for a new installation.

  If this is still true today (and I'm sure that his return not ), that is why his does not show for you now.

• BBM app target os

  Hello world

  I want to develop the bbm app function, and a sustained minimum OS as 5.0. All of the samples I've seen are 6.0 apps.  Although there is a pawn of the addiction, I'm not sure with 5.0 OS. So is my question - possible to make bbm application which runs on 5.0?

  Yes - the problem is the level of BBM which is installed.

• BlackBerry Smartphones can not connect to App world via PC and Blackberry phone, someone knows how to fix this?

  Hello

  It's been 1 month that I used my app world via my phone last using the Wi - Fi connection to download an application. Last week, I try to download an application through my PC, but app world does not recognize my phone when I try to download. I ve tried solutions fix my phone not recognizable around the world of the app in the PC, but nothing happened. So, ive decided to connect to wireless again. But when I try to connect to the world of the app, it says that,

  "You are currently on a service plan that requires a Wi - Fi connection to use this application. If you want to use this application outside of a Wi - Fi connection, please contact your service provider to upgrade of data plan".

  Can someone help me or know this problem?

  Thank you. Hope someone can help me with this.

  Hello! Thanks for your reply. Ive has already know what is the cause of this issue but, initially, Im just using my BB Phone to connect to the world of the app and work with my solution. So here it is to connect to App world using BB Phone 1. Connect wifi 2. update your Blackberry ID and password on your phone, it is, I've just updated my Blackberry ID and password because I forgot to change my information on my phone. 2 months ago I change my ID and password to the web, so I think that the world of the application is unable to recognize my old identity. haha hope it helps others

• PE2950 DRAC5 - failed to connect - channel access denied

  I have a new PE2950 with DRAC5.   When you try to start a console from the webmin DRAC, (after all security warnings, updates plugin warning, blah blah aaargh) I get an error "Failed to connect" "channel access denied."  It's using IE7 for a Windows XP PC.  The server is running Windows 2003 Enterprise Edition.

  I notice that, unlike the older DRAC, I see no drivers or DRAC hardware listed in the Windows 2003 Server OS device manager.  Maybe the Windows 2003 drivers are needed?   I could not of course find them on the OpenManage CD supplied with the system (despite the label of the CD to the contrary)

  
  

• Connection of BBM app problem

  Hello

  I try'ing to connect my application with BBM on simulators, it works fine, but the device I get boot error.
  Connecting to BBM step 2 of 4: check that I receive: server is unavailable. Impossible to proceed with the connection of BBM. Please try again later. (I tested it on 9000 "BOLD" and 9900)

  Help, please.

  You have a BlackBerry data plan in the device? You can use BlackBerry messenger to communicate with others.

• Unable to connect to app store after iOS iphone 10 6 update

  Hello

  Since the upgrade to IOS 10 my iPhone 6 with stubbornly refuses to connect to the App store. The error message is "unable to connect to the app store, try again."

  The phone is connected to the internet (I can surf and send emails) by wifi. Turn off the wifi and the use of mobile (cellular) only link cause the same error. I also did a reboot hot and cold, without result.

  Any suggestions?

  Thank you

  Bill...

  ANSWER: this theme has the best 3 options. In my case, I had to sign out and in the app store of settings, iTunes and app store. Fixed

  PLE-3598048 http://www.Macworld.co.uk/How-to/iPhone/What-do-If-You-cant-connect-App-Store-AP.

• Upgrade to iOS 10. Cannot connect on app store

  I have upgraded to iOS 10.

  Now I can't connect to the app store.

  The "updates" show that I have updates pending.

  When I switch to "updates" it shows the list for 2 seconds the list disappear.

  I Iphone6 more.

  Help please.

  Hello. Try a few troubleshooting steps in this article If you can not connect to the iTunes Store - Apple Support

• Cannot connect on app store or photos

  Hello

  Displays the first time - please accept my apologies if I posted wrong because this is my first time.

  I have a problem with my macbook air mid 2013 girls, run OSX El Capitan version 10.22.5.

  When you try to connect to the app store or photos or iBooks, photo booth, I get the following message on each of them - "app store close unexpectedly", "iBooks quit unexpectedly", etc. - what happens on other applications as well and will not let me open I have an endless loop of this message. I tried to figure it out using various forums etc, but can't seem to find a solution - can anyone help?

  apologies - I meant 10.11.5 version

• Failed to connect when you connect on app store

  I'll be back just my Macbook Pro 13 inch 2012 model repairs after having found a defective HARD drive cable. The authorized repair shop changed the cable and the HARD drive and now I'm trying to set up the OS X with my AppleID.

  What I've noticed, is that the computer "horses" a newspaper asking for passwords and allow several times the same questions. For once, he wants more to accept the certificate of wifi and connecting to iCloud also asked for passwords at least twice each time you start.

  I could not connect to the wifi during the phase of configuration of Mac OS X for the first time, but once connected I managed to get the communication works. The Safari browser is also ridiculously overprotective and not even open the www.icloud.com because it "cannot establish a secure connection", and whenever I visit a page online it asks me to accept the certificate. She also will not download anything, as I tried to download chrome many times, even if she manages to open several pages like apple.com and www.google.com.

  The App store does not accept my login credentials when you try to connect to the App store and iTunes or the will.

  I thought I have try and open it in recovery mode and reinstall OS X when you are connected to the internet, but trying to connect to one of the two networks (protected WPA2) it does not connect.

  Does anyone have an idea of what could be the problem? None of my other devices have no problem whatsoever using this network. And for some reasons, some applications will accept the appleid and the password while others keep insisting that the password is incorrect.

  I read the date of automatic update, and now the display of connection for the App Store is different.

  I now have the message 'an Apple ID verification code is required to connect. Enter your password followed by the verification code displayed on your other devices". I get the message my iPhone for authorize and click on allow and get code verification, but no new window opens on my Mac to enter the verification code. Put me to square.

  iCloud now constantly asking the password at startup and does not accept the Passover incidentally.

• Why can I only connect to App Store in guest mode?

  I recently downloaded El Capitan and since then could not connect to the app store when I connect in guest mode. Can you please help with that?

  In addition, I can not connect to secure WPA2 wifi unless I am invited again mode. Connect to a wifi unsecured through my own account works fine however.

  Thank you very much for your advice!

  SH

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.