connection between sql server and java

Similar Questions

• Replication of data between SQL Server and using Oracle11g materialized view.

  I have Sqlserver 2005 as my source and oracle11g as my target. I need fill out the target daily with change of the source data.
  to do this, we created a dblink between SQL Server and oracle and reproduced this table as a point of view, materialized in Oracle.
  problem that we get here is fast refresh option is not available.each day it will pick up all of the data source.
  is it possible to use Fast refresh in this scenario?
  
  Thanks in advance.
  
  Kind regards
  Balaram.

  You can try MS SQL replication.
  Configure transactional Standard of MS SQL and Oracle Publication subscriber http://msdn.microsoft.com/en-us/library/ms151738%28v=sql.90%29.aspx

• data replication with ODI between SQL SERVER and ORACLE

  Hello world
  First of all, I want to migrate database SQL SERVER and ORACLE DB tables.
  And then make online (synchronous) replication from SQL SERVER to ORACLE using ODI.
  
  I have not used before ODI.
  How to use the ODI for this?

  1. create a master repository and connect to the "topology Manager.
  2. in the topology Manager, you must configure the following
  2.1 create a data server for the Oracle under Oracle database in the physical connection
  2.2. create a database for the SQL Server database server in SQL Server in the physical connection. To do this, the jdbc for sql server driver.
  2.3 implement the logical connection and frame
  2.4 create a workrepository in the topology manager repositories tab
  3. connect to the designer and follow these steps
  3.1 create a template for the SQL Server source and reverse (import) the datastores (tables) to the model.
  3.2 the value of the model for the target of the Oracle
  3.3 create a (mapping) interface, under the table in schema define the source and then add it to the target and bind
  3.3 on the flow tab, you must set the Modules (KMs) of knowledge to perform the load. You must have imported the KMs before creating the interface.
  3.4 in IKM put 'create table traget' to 'yes '.
  4 run the interface to load data from SQL to Oracle Server

  Thank you
  Fati

• Problems connecting to SQL Server 2000

  We have installed SSL certificates on both nodes of the cluster sql server and activated 'Forced the protocol encryption' on db server using the SQL Server network utility.
  After you activate that we get the message below. We want to encrypt the data passing between the CF and SQL servers.
  We need help in this regard
  
  Error message:
  Operation failed on the data source named "CData".
  Cause of the failure "java.sql.SQLException: [Macromedia] [SQLServer JDBC Driver] no more data to read."
  
  Details of the environment:
  The database server info:
  : SQL Server 2000 sp4 (active/passive)
  Windows 2003 - sp1
  
  CF:
  ColdFusion MX Version 7,0,2,142559
  Enterprise Edition
  
  Windows 2003 operating system
  OS Version 5.2
  Details of the JVM
  Java Version 1.4.2_11
  The vendor Sun Microsystems Inc. Java.
  The http://java.sun.com/ Java vendor URL
  E:\javaSDK\j2sdk1.4.2_11\jre House of Java
  Java file encoding Cp1252
  Java by default to settings regional en_US

  ColdFusion does not yet support encrypted datasource connection, so this is in my view, a reason why you get the error message.

• Developer SQL 4.1.2 uses Windows authentication to connect to SQL Server

  I'm using SQL Developer 4.1.2 and tries to connect to SQL Server through Windows authentication.  If I use SQL Server authentication, everything works so the jTDS driver appears to be installed and working properly (I use jTDS 1.2).  When I switch to Windows authentication, I get the error

  Status: Failure-Test failed: IO error: failure of the SSO: library Native SSPI has not loaded. Check the system java.library.path property.

  Of course, I googled the error and came up with dozens of people asking the same question and is told to move the ntlmauth.dll from the \SSO directory to the jTDS directory in various other directories.  That seems to work for others so for the last few hours, I was copying the DLL in each directory that I can find someone on the internet suggesting without success (I do restart SQL Developer each time).  In the Directory SQL Developer, I tried

  Developer c:\Oracle SQL 4.1.2.20.64\sqldeveloper

  Developer c:\Oracle SQL 4.1.2.20.64\sqldeveloper\sqldeveloper\bin

  Developer c:\Oracle SQL 4.1.2.20.64\sqldeveloper\jdk\jre\bin

  
  

  On the off chance that something was still making reference to a directory of a SQL Developer previous install, I put it in the same directories in the front THAT SQL Developer installed on this machine.  On the theory that she was using the FMV of the machine rather than that I downloaded and installed with SQL Developer, I advanced and dropped the DLL in the directory \bin for each installation of Java, that I could find on the system.

  
  

  c:\Program Files\Java\jrd1.8.0_45\bin

  C:\Program Files (x86)\Java\jre1.8.0_45\bin

  C:\Program Files (x86)\Java\jre1.8.0_60\bin

  
  

  Still no luck.  SQL Developer, I went to help. Everything | Properties and checked that the first way to java.library.path is what I expected and where I dropped the ntlmauth.dll first.  I even put it in c:\windows and c:\windows\system32 just to be sure.

  
  

  Java.Library.Path

  C:\Oracle SQL Developer 4.1.2.20.64\sqldeveloper\sqldeveloper\bin. C:\WINDOWS\Sun\Java\bin; C:\Windows\System32; C:\WINDOWS;

  
  

  Despite the DLL just about everywhere that I guess I would need to have it, I still get the same error.  I must be missing something obvious.  But at this point I was looking at it so long that I just can't see it.

  
  

  Justin
  

  
  

  
  

  I use SQL Developer 4.1.2 and tries to connect to SQL Server through Windows authentication using jTDS 1.2

  Not sure if this has anything to do with your problem, but according to jTDS - SQL Server and Sybase JDBC driver / newsand since SQL Developer 4.1.x requires Java 8, '' you should stick only to jTDS 1.2 If you need to use a version of Java before Java 7 '' . Perhaps using a version 1.3.x jTDS driver might help.

• 11g connects to SQL server... character display problems

  Hi gurus,
  
  DB: 11.2
  OS: redhat 5.5
  
  There is a problem during display of character with sqlplus and even worse on TOAD, SQL Developer tool.
  
  There is a heterogeneous connection between 11g and ms sql serever. I use freedts, unixodbc and dg4odbc to connect.
  using tool isql... the select statement has been well formatted... See example |

  | USIM sales |
  | Charge accrued on debt Resprise

  BUT when I use sqlplus some characters are broken... Please see sample
  COST_NAME
  V e n s e t U S I M
  R e s p r e s i d e c h a r g e p r o v I s I o e n s e n s u r v e r
  a, c e n

  in other client tool for example, TOAD, the output is worse just see the only the first character of each line for example

  V
  R

  I tried the value for nls_language in french and English but do not solve the problem.
  
  anyone with a clue of what is wrong or a bug?... 1 million .thanks

  PL do not post duplicate topics - character display problems... 11g connects to SQL server

• KB2760411, KB2760588, but now "can NOT CONNECT to" SQL Server!

  Today I faced with the same Windows Update problems as many people - with KB2760411 and KB2760588 constantly reinstall - and try to resolve which included several reboots - system
  ())

  BUT now... a serious problem on one of these machines: cannot access SQL Server!
  Fortunately, I did not run these updates on any * production * machines (I do updates on development machines, first) - this is a development machine - but I still need to get working SQL Server of this machine!

  I tried to use a Windows login to connect and tried to use a SQL Server to connect user, and what it in either, looks like the same message:
  "Cannot connect to ."
  A network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - could not open a connection to SQL Server) (Microsoft SQL Server, error: 2)

  Note that for windows, this server running Server 2003 (this is why I chose the value of the drop down menu 'windows xp', below).
  and for sql server, run SQL Server 2005.

  Help!?

  ALSO NOTE: I KNOW THIS ISN'T A "NETWORK ERROR."
  because I get the same message when I remote desktop on the server and try it.
  I did try to look in the windows Server 2003 event viewer, but saw nothing relevant under the security, system or Application.

  When I tried it with a sql server login, I clicked on "Show technical details" and got the below (blank lines removed and replaced with the name of the server):

  ===================================
  Unable to connect to .
  ===================================
  A network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - could not open a connection to SQL Server) (.Net SqlClient data provider)
  ------------------------------
  For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
  ------------------------------
  Error number: 2
  Severity: 20
  State: 0
  ------------------------------
  Location of the program:
  at System.Data.SqlClient.SqlInternalConnection.OnError (SqlException exception, Boolean breakConnection)
  at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning (TdsParserStateObject stateObj)
  to System.Data.SqlClient.TdsParser.Connect (ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean ignoreSniOpenTimeout, encrypt Boolean trustServerCert, Boolean, Boolean integratedSecurity, SqlConnection owningObject)
  to System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin (ServerInfo serverInfo, String newPassword, ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject, Boolean)
  at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover (String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
  at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist (SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
  to System.Data.SqlClient.SqlInternalConnectionTds... ctor (DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
  at System.Data.SqlClient.SqlConnectionFactory.CreateConnection (DbConnectionOptions options Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
  at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection (DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
  at System.Data.ProviderBase.DbConnectionFactory.GetConnection (DbConnection owningConnection)
  at System.Data.ProviderBase.DbConnectionClosed.OpenConnection (DbConnection outerConnection, DbConnectionFactory connectionFactory)
  at System.Data.SqlClient.SqlConnection.Open)
  to Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection (UIConnectionInfo above, IServerType server)
  at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser)

  Thanks Nirmal for the acknowledgement of receipt.

  As you can see, we ended up find us the answer.
  (BOWL is not same document how to grant "Log on as a service", under Server 2008 R2, WHEN ON THE DOMAIN CONTROLLER.)  BOWL documents which fully Server 2003, but only partially for Server 2008 R2.)

  But we are not given the opportunity to "mark as answer" on our own solution.
  If YOU think that the INFORMATION we posted had value, YOU may mark as answer.

  The TechNet link:
  Unable to connect to SQL Server... (includes advice in response: measures to grant permissions in Active Directory, the domain server * RUNNING SERVER 2008 R2 *).

  Thanks again.

• OLEDB connection to sql server 2005 using ssis 2008 problem

  Hello

  I'm trying to create the oledb connection to sql server 2005 to help using ssis 2008.

  But I get an error message "cannot generate SSPI context".

  More information: -.

  Using SSMS, I can connect to sql server 2005 and the network protocol option, I have to choose is "NamedPipes".

  Are there special properties that I need to put everything in creating some oleb connection via ssis 2008.

  Please help as I am not able to find a solution on technical Web sites.

  I changed the connection oledb connection string.

  Name additional SPN, which is the same as the name of the server and it worked.

• Windows 7 64 bit Pro connects to SQL Server on the Windows Server 2008 R2 Standard domain

  I put upgraded to Windows 7 Professional computers to Windows XP Professional, but I have a problem with getting one of software programs management of stock that allows us to connect to our SQL Server 2008 R2 Standard Windows on new Windows 7 computers.

  Our computers are connected to a domain, and therefore SQL Server. Computers Windows XP allows each user to standard domain to connect and to connect to SQL Server via the stock management software.

  But on the standard domain of Windows 7 Pro computer users unable to connect to SQL Server, but administrator accounts of area on the same Windows 7 Pro computers can connect to SQL Server through the inventory control program.

  I have set up the alias of the server, the server name and port number via the SQL Server Client Network utility ( cliconfg.exe ) so I know this isn't the problem because it works when I'm logged on as a domain administrator.

  There seems to be something to do with permissions of user domain and Windows 7 Pro. There seems to be a change from Windows XP Pro to Windows 7 Pro that does not allow standard domain users to connect to a SQL Server. But I can't find anything about and cannot practice how to solve this problem, except to make all users, domain administrators that is obviously not a good thing to do. So basically I think I need to create a group policy that allows users to connect to SQL Server, but I have no experience in doing this and don't know where to start.

  Thank you for all that you guys help and I hope someone can give me the solution to this problem.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Connection to SQL server 2012 (with Alwayson) of BI Publisher

  How to connect to SQL Server BI publisher 2012 using a headset and connect to a readonly database. I need to know if we can use the 'ApplicationIntent ReadOnly ="parameter. Also, can I install Microsoft SQL Server jdbc 4 on WLS? Please let me know

  I am able to do this work by installing the MS sqljdbc4 on weblogic and specifying the readonly parameter.

• BI Publisher cannot connect to SQL Server.

  Hello

  We try to create a BI Publisher connection to the SQL Server database. However, we receive a message "could not establish a connection. We tried google to find a solution.

  We don't know what the problem is. We can ping the SQL Server computer from the server of BI applications.

  Apparently, it seems that the required JDBC driver files are missing. We use OBIEE version 11.1.1.3.0 and 11.1.1.6.0. How do we know if we have the right JDBC driver file? And also, where we must copy the JDBC driver/jar files to.

  Any help will be much appreciated.

  Thank you and best regards,

  Maury.

  Yes 'Database driver class' is 'hyperion.jdbc.sqlserver.SQLServerDriver' is correct

  and your connection string should like this "jdbc:hyperion:sqlserver://mysqlservername:1433; DatabaseName = master.

  username = his

  password = sa_password

  If does not work, you can try 'other' in the type of driver, and the classpath of weblogic set to connect to SQL Server

  doy, you know what should you do?

• How to connect to SQL Server

  I downloaded SQL Developer (3.0.04) to convert the SQL Server code into the code of the Oracle. On the Connections tab, I don't see SQL Server, I only see ACCESS or Oracle. What could be wrong?
  Please notify.

  Check for Updates allows you to download the JTS for SQL Server and Sybase driver.

  More details here
  http://www.thatjeffsmith.com/archive/2012/01/SQL-Developer-supports-DB2-Sybase-MySQL-access-and-Teradata/

• Unable to connect to SQL Server

  Hello
  I am interested in the connection to SQL Server, but will have questions. Simply, I can't create a new connection after that I'm pointing the JDBC jar file. Nothing happens when I click on the button +!
  
  SQL Developer Version: 3.1.07.42
  Java: 1.6.0_11
  OS: Vista, also tried it on XP with the same question
  
  Please help what am I doing wrong.
  Thank you!

  You cannot use jtds 1.3, you MUST use 1.2 according to our docs here
  http://www.Oracle.com/technetwork/database/migration/omwb-getstarted-093461.html#CONF

• Developer SQL, SQL Server and the ampersand

  Hello
  
  I am connected to a SQL Server database (2008) and has difficulties to get a query runs correctly in SQL Developer (3.1.07).
  
  Simplified example
  
  Select table_field
  table
  where table_field <>'This & That ';
  
  Expected results
  
  table_field
  Other stuff
  Other stuff
  Other stuff
  
  Actual results
  
  table_field
  Other stuff
  This & That
  This & That
  ....
  
  
  I can't get SQL Developer to recognize as a literal ampersand &. I tried it out in many ways, but he still thinks it's a variable.
  
  The query works exactly as expected in MS SQL Management Studio and Toad. Of course, I can just run it in one of these, but I would try to get this working with SQL Developer. Suggestions?
  
  Please let me know if I can provide further information. Thank you.

  Hello

  SQL worksheet to developers is designed for Oracle, but we allow you to execute instructions SQL Server and other databases Oracle not.
  This can lead to some quirks, such as the one you met.

  Oracle SQL * Plus uses and commercial for define substitution variables.
  Oracle SQL Developer has implemented the same concept.
  Unfortunately there is no sense when something is running on an Oracle database no.

  To work around the problem, you can run the following SQL * Plus command in SQL Developer, before your query SQL Server.
  TOGETHER TO DEFINE
  Select "Hello & Goodbye";

  The following may be useful as well.
  http://dermotoneill.blogspot.com/2010/11/workheet-hints.html
  http://dermotoneill.blogspot.com/2010/12/SQL-Server-and-Sybase-browsing.html

  Kind regards
  Dermot.
  SQL development team.

• Data type of text is not displayed using SQL Server and ASP/VBScript

  Maybe someone help me with this because I used to use PHP/MySQL, but I use for this a Classic ASP/VBScript and MS SQL Server instance and I don't know that much. The scenario is I have an old site that was designed using html tables and I do a CSS/XHTML update on Visual design. As long as we are here, there are some pages that are dynamic and use a MS Access database and we thought it's a good time to upgrade from MS SQL Server (2005, to be exact). No time/money for bringing classic ASP VBScript in ASP .NET.
  
  Overall, the upgrade went fairly well, especially just to create a new connection to the DB in SQL Server in Dreamweaver after all the tables and data were migrated to SQL Server. Almost everything works as it should. A problem though.
  
  For some reason, the data of the data type 'text' in SQL Server is not appear (or sometimes appear). I even tried to recreate the recordsets and binds fresh data and the code is more or less identical to what we had before. Anyone know what's happening, or how I can get this data to show?
  
  I think that there is perhaps some simple and double quotes in the text data and which could be screwing things up. I was hoping there is only a simple function that I could apply the code, but as I said, I don't know.
  
  Thanks in advance for any help you can provide.
  
  -Bill

  captcashew wrote:
  > Maybe someone help me with this because I used to use PHP/MySQL, but for this one
  > instance I use Classic ASP/VBScript and MS SQL Server and I do not know
  > that much. The scenario is that I have an old site that was designed using html
  > tables and I do a CSS/XHTML update on Visual design. As long as we
  > are there, there are some pages that are dynamic and that use a MS Access
  > database and we thought it's a good time to upgrade from MS SQL Server
  > (2005, to be exact). No time/money to classic ASP VBScript in ASP.
  > .NET so.
  >
  > Overall, the upgrade went quite well, especially just needed a new
  > connecting to the DB in SQL Server in Dreamweaver after all tables and data
  > have been migrated to SQL Server. Almost everything works as it should. One of the problems
  > If.
  >
  > For some reason, the data of the data type 'text' in SQL Server is not
  > appear (or sometimes appear). I even tried to recreate the recordsets and
  > binds fresh data and the code is more or less identical to what we had
  > front. Anyone know what's happening, or how I can get this data to show?
  >
  > I think that maybe there are single and double quotes in the text
  > data and which could be screwing things up. I was hoping that there is only a simple
  > function I could apply the code, but as I said, I don't know.
  >
  > Thanks in advance for any help you can provide.

  Your text field should be the last of your select statement, as
  its not stored in the table with the other data, its stored elsewhere,
  as a binary object, should be treated differently. Its common
  the migration of the access problem.

  If you need more of 8000 characters stick with him, otherwise use
  varchar (8000) or nvarchar (4000) If you need (limited unicode characters
  4,000 cos of the double byte characters)

  Dooza
  --
  Display guidelines
  http://www.Adobe.com/support/forums/guidelines.html
  How to ask Smart Questions
  http://www.CatB.org/ESR/FAQs/smart-questions.html