Connection error internet Fireworks

I just reinstalled Macromedia Studio MX, in particular - Fireworks MX
When I click on the update on the update panel button, I get an error message 'Connection error', ' check your internet connection and try again. Well, I'm currently connected to the internet via ADSL, and I don't have connection problems to access this forum. I can't find any documentation on the resolution of this problem. Any ideas?

snowlineguy;
It's been quite some time that I used fireworksmx because I
updated, but yes - it is my understanding of this Panel of response have been updated
order a long time ago...
-Tom Unger

Tags: Fireworks

Similar Questions

  • "Connection error. Check the Internet connection. »

    I just installed my printer (an HP CM2320fxi upgrade). Everything works except ePrint/Web Services. The printer is connected directly to my router. It prints network computers. AirPrint works from iOS devices. It can scan to e-mail and documents are properly received by mail outside the network accounts (i.e. it must be connected to and talk to the internet). All the router firmware and the printer has been confirmed to date. all devices have been reset and restarted several times. However, if I try to activate HP Web Services for ePrint installation, I get the following error message: "connection error. Check the Internet connection. »

    After struggling with this issue for many months, including many discussions phone and email exchanges with technical support from HP, they finally sent me a replacement printer.  It works as advertised right out of the box.  I don't know what was the underlying problem, but the fact is that he couldn't be corrected with one of the solutions proposed in the discussions on this forum.  Apparently, there's HP printers out there with a lack of internet connection has nothing to do with a solution that is configurable by the user.  If you have one, then you will need to replace your printer.

    I can't thank HP for that.  They tried my patience and tenacity of the months before offering the only real solution.  They must know their products better than that and should have replaced my printer several months ago.  That being said, the tech person with whom I had most of my relationships, it was a nice guy.  I expect he's working under an edict on exhausting all possible tactics before agreeing to replace the unit.

    Good luck!

  • HP LaserJet Professional P1606: HP Web Services Installation - connection error. Check the Internet connection.

    I try to activate the Services Web of HP but connection error. Check the Internet connection. .

    I use the static ip address with the address of the preferred DNS: 8.8.8.8 and 8.8.4.4 and it does not work.

    I changed to DHCP as it does not work.

    I have a ZTE home modem router connected to the printer.

    The link below should help you.

    http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/2585903

    Kind regards

    Oliver

  • "Connection error. Check the Internet connection. "When you try to enable Web Services on HP 1606dn

    Error message "connection error. Check the Internet connection. " When you try to enable Web Services on HP Laserjet 1606dn.

    Operating system: Windows 7

    Thanks for the help,

    Howard

    Last UPDATED 21/07/13: after upgrading the firmware to the latest version, I could enable web services. Great help has this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw

    Thanks for trying to help.

    In my case, it did not help.

    I followed the instructions on this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw.

    The key was the update of the firmware, I think.

    Walter

  • Netflix in WMC gives internet connection error, started yesterday, works in the browser

    Original title: WMC-Netflix's internet connection error

    I tried to use Netflix in Vista Windows Media Center (WMC) last night and got an error. The error says I need to check your internet connection.  I checked the connection and it worked.  Also in IE8 I logged into my Netflix account and released a video of my Instant queue.  This proves that my internet connection and a Netflix account working. I tried to re-login to Netflix of WMC, but once again the message on checking the internet connection appears.  I restarted the PC, but that did not fix the problem. Netflix I uninstalled and reinstalled, no not yet fixed.  Can anyone help?  I've been a happy user of WMC-Netflix for several months (so far).  Notice, 2 security patches Windows automatically installed yesterday before I tried to use Netflix.

    I just noticed that NetFlix had started working again for me with Windows Media Center. Mysteriously, as if by magic... it seems to have fixed itself after just a few weeks!

  • I get a Run time Error, whenever I connect to internet explore

    ... Error message whenever I connect to internet explorer, an error message appears "Run time Error and stops, I tried to solve the problem I even called my internet provider Verizon... Please help!

    Hello

    Internet Explorer freezes or crashes
    http://support.Microsoft.com/GP/ie_freezes_or_crashes

    Tips for solving problems with Internet Explorer
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

    When you start Internet Explorer, it opens, flashes and then closes immediately
    http://support.Microsoft.com/kb/967896

    ------------------------------------------

    Several troubleshooting methods:

    What antivirus/antispyware/security products do you have on the machine? Be one you have
    EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
    may cause strange problems).

    If no joy there's something blocking perhaps.

    Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

    IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

    IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

    Close and restart IE or IE with no addons

    not better?

    IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
    installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
    other possible problems.

    Windows Defender - tools - software explore - look for problems with programs that do not look
    right. Allowed are usually OK and "unauthorized" are not always bad. If doubt about a program
    ask about it here.

    Could not be a free - SpyBHOremover - BHO - standalone program, needs no installation, download.
    unzip and run - all are not bad, but some can cause your question (toolbars are BHO).
    http://securityxploded.com/bhoremover.php

    How to change, add or remove startup programs in Windows 7
    http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

    Also get Malwarebytes - free - use as scanner only.

    http://www.Malwarebytes.org/

    --------------------------------

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • With bitcomet Internet connection error

    BitComet download correctly. It again me, I am having inter Explorer connection error. pretty much your standard internet explore cannot display the Web page. What can I do to fix this?

    See if the information below helps you solve the problem/s you have with Internet Explorer:

    http://support.Microsoft.com/default.aspx/KB/936213/?p=1

    "How to optimize Internet Explorer"

    Configuration in Windows Internet Explorer 7 and Windows Internet Explorer 8 settings can cause one or more of the following problems:

    ·    You experience performance issues in Internet Explorer.

    ·    You receive an error message in Internet Explorer. For example, you receive a message error "Internet Explorer cannot display the webpage".

    ·    Internet Explorer stops responding.

    This article describes how optimize or reset Internet Explorer in Windows Vista to solve these problems.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/936215

    "How to solve the problems of Internet Explorer in Windows Vista and Windows XP"

    This article explains how to solve any problems that you may experience when you use Windows Internet Explorer 7 or Windows Internet Explorer 8 on a computer that is running Windows Vista.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/936214/

    "How to solve compatibility problems that affect Internet Explorer 7 in Windows Vista"

    This article describes how to troubleshoot software compatibility affecting Windows Internet Explorer 7. To help determine which program may be the cause of the problem, you can do the following:

    1 use the mode safe mode with networking

    2. perform a clean boot

    3. use another user account

    4 scan your computer against viruses and spyware

    5. run Internet Explorer 7 in "no Add-ons" mode

    Hope the above helps.

    ·                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Also try the Forum from IE:

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

    They will help you with your question IE in Forum Internet Explorer above.

    See you soon.

    Mick Murphy - Microsoft partner

  • Laserject 1606dn error, "connection error. Check the internet connection. "during activation ePrint

    I try to turn on my LJ 1606dn ePrint. I downloaded and installed the firmware and that is okay. I went to the Web Services tab to get the code to register the printer. When I click on 'Activate' in the ePrint section, I get the error, "connection error. Check the internet connection. "My connection network and internet are working properly. Am I missing something? I need to open a port on my router? Is there a special song, I need reciting under the full moon while sacrificing a live chicken?

    Thank you

    Joe

    jfusco,

    If you have an IP address manually, assigned to the printer:

    1. Enter IP address of the printer in the Web browser address bar and press ENTER.
    2. Go to the network tab and the IPv4 Configuration of the page.
    3. In the DNS server settings, the entry in your domain DNS servers or put IP of the router Address in the preferred DNS server and 0.0.0.0 or 8.8.8.8 in the section auxiliary DNS server and apply the changes.
  • Error 815 connecting to internet.

    I am trying to connect via a miniport WAN (PPPOE) and it is coming up with an error 815 and also taken is not plugged into the network adpter LAKE

    Separated from -.
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-networking/Dell-Inspiron-530s-unable-to-connect-to-Internet/b41c04f8-459c-44E2-9f8c-da8bf9c68669

    Hello

    Sorry for the late reply.

    What version of Windows are you using?

    Check the solutions on this thread

  • Internet connection error!

    This window keeps popping up all the time: your request cannot be completed because the service could not be found or did not respond. The service may be experiencing technical difficulties, or you may need to change your network settings.   Nothing that I don't seem to get rid of.

    Hi MariaKane,

    Thanks for posting your query in the Microsoft Community Forums.

    I understand from the description of the question, you have problems to connect to the network wireless on Windows 7 computer. I will certainly help you in this regard.

    You may encounter network or problems of Internet in Windows for several reasons. Some common problems that can cause these problems are:

    · A wireless network adapter switch that is not enabled

    · WEP, WPA, or WPA2 key or password security issues

    · Cables that are not connected correctly

    · Corrupt or incompatible drivers

    · Missing updates

    · Network connection settings

    · Hardware or software problems

    I suggest you refer to the help articles that help you to identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

    Wireless and wired network problems

    Setting up a wireless network

    For your reference:

    http://answers.Microsoft.com/en-us/IE/Forum/IE8-Windows_7/Internet-connection-error-your-request-cannot-be/8e2e4a18-cb9d-4c04-a79b-b701781a6fa4

    Back to us for any problem related to the Windows operating system. We will be happy to help you. We at Microsoft try to provide our customers the best experience.

  • Internet connection error appears when using WMP

    This just started happening... As soon as I open wmp, I get a pop up message saying internet connection error - your request cannot be completed because the service could not be found or did not respond.  The service may be experiencing technical difficulties, or you may need to change your network settings.  I can't get rid of this.  Can't find something on google is about that.  Someone can help me.  Its WMP12 and Im using IE9.

    This just started happening... As soon as I open wmp, I get a pop up message saying internet connection error - your request cannot be completed because the service could not be found or did not respond.  The service may be experiencing technical difficulties, or you may need to change your network settings.  I can't get rid of this.  Can't find something on google is about that.  Someone can help me.  Its WMP12 and Im using IE9.

    Press the Windows key and press R and type in the following:

    MSDT.exe - id WindowsMediaPlayerConfigurationDiagnostic


    Press on enter and follow the instructions to reset the WMP.

  • Hi I'm trying to install windows 7 in my xp service pack 2... but I often get error code: 0 * 80070005... indicating that I was not connected to internet.but, in fact, I was connected to internet

    Hi I'm trying to install windows 7 in my xp service pack 2... but I often get error code: 0 * 80070005... indicating that I was not connected to internet.but, in fact I was connected to internet... pls sumone help me solve this problem!

    Boot from the Windows 7 DVD
    Click Install now
    Accept the license agreement
    When the option is displayed to select a type of installation, click (Custom advanced)

    Select the disk partition where you want to install Windows 7 click Next.

    You will receive the following warning:

    The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

    (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

    The installation program will now begin installation. During installation, your computer will be restarted several times.

    Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

    You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

    http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

  • Get the "No. Internet Connection" error message when accessing Flipshare

    Original title: Flipshare / Windows 8

    Hello!

    If I want to go on the site 'Flip' and 'support' or 'registration', I got the message that I have not internetconnecting.

    I had this "problem" since I got my new computer with Windows 8, I used to have a computer with Windows XP, I had no problem then.

    Because of this problem, I can't go to the website of Flipshare.

    Who can 'help me '?

    Thanks in advance.

    Evie Badenbroek

    Hello Evie,

    1. the problem persists with a particular Web site?

    2. What is the exact error message you get?

    3. do you use Internet Explorer to visit Web sites?

    Internet connection issues are more often caused by cables disconnected or routers and modems that do not work correctly.

    Perform the steps from the link below and see if it helps.

    http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-Internet

    Answer please if you have any questions.

  • "Please connect to" internet error message when disabling Photoshop CS5

    I want to disable my copy of Photoshop CS5, so I can activate it on my new computer.  However, I get the error message "Please connect to" internet when I try to turn it off.  My internet connection works perfectly well; I can access various websites without problem.  I tried on two different wifi networks, but also an ethernet connection and gave the same error each time.  I'm running Windows 7 on a Dell laptop; all the networks of the internet was provided by Comcast.  Someone else that was at issue and have a solution?

    Check your hosts file.

    help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • no internet connection error

    I get "internet connection error" when trying to convert a PDF to word.  However, I have internet connection.

    Hi davidf91213576,

    Currently, Cloud Document Adobe seems to not be available.

    Please, go you to https://cloud.acrobat.com in a web browser.  You will see the following message is displayed.

    Try again later check whether Cloud Adobe Document services are available.  Sorry for the inconvenience.

Maybe you are looking for

  • No book iBooks in itunes

    I used to charge my books that I had in my iPad via iTunes iBooks, but now when I connect my iPad to my Macbook it shows 0 Books in sync in iTunes, but all the books are still in iBooks, I can't move books or another store not bought a PDF file to my

  • iTunes gives me a headache...

    Hello, I have problems with my iPhone when it comes to my wallet. I can her OCD when it comes to it but its boring, however. Whenever my phone sync, it comes up with an error - 54. I've never really paid it any attention because the song syncs to my

  • New 4 GB Clip + empty shows 8 GB card when the internal memory has more than 10 files

    If I have more than 10 files on the internal memory, external 8 GB card will appear empty. If I format the internal memory and does not add any files, I see everything on the external card. MSC is set and PC, I see all of each drive. Any advice? I ha

  • Inspiron N5110 - 8 beeps at startup

    I have a Dell Inspiron N5110 that when turned on beeps 8 times. The LCD lights up and the power light but no screen startup Dell or something. Only 8 beeps over and over and over until I turn it off. I tried to boot the laptop with and without the ba

  • Article Add double in SystemListDialog

    Hi all Today I try FRO SystemListDialog but go get a few question. Tiem first dialogue opened ok, but after that opens the second dialog box at this time element to add double. So can I know how to clear this point? Code: -. import bb.cascades 1.0 im