Connection error using the ID of the company on iOS

Similar Questions

• Want 4500: Connection error! The printer could not connect to the server

  Connection error! The printer could not connect to the server!

  Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!

  I am successfully connected to my router and can print from my pc and my ipad with airprint.

  PC "will not find"the printer either for purposes of updating

  What I need to change the DNS. If so, I don't know what it is or how to do it!

  I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.

  Can anyone help?

  Very frustrated customer :-(

  Hi @roopuk,

  Thanks for getting back to me.

  Sometimes the manual DNS 8.8.8.8 / 8.8.4.4 won't work in some configurations of network users.  Try the same steps as described above, but this time use the following parameters:

  Manual preferred DNS Server: 209.244.0.3
  Auxiliary manual DNS server: 209.244.0.4

  If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.

  What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services.  In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server.  HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.

  Here is the information that you need for your provider service to open ports on your router/modem...

  -Multicast must be enabled
  -Hello enabled for AirPrint (relevant for iOS and Mac OS users)
  -Mac filtering should be disabled
  -Also, make sure that your router's firmware to date if
  necessary
  - The dmz on the router mode and turn it on to the printers IP address: _

  Ports to open are: Eprint and Apps

  Incoming Ports.

  UDP
  80
  443
  ------------------
  Outbound ports

  TCP
  5222
  5223
  -------------------
  Once they are open, you should have no problems connecting to services web eprint on your device.

  I would like to know how it works for you.

  Kind regards

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Win7 always tries to connect by using the default profile for the Native WIFI

  Win7 always tries to connect by using the default profile for the Native WIFI
  I defined a new WIFI profile for my home WIFI network. I use a USB of NETGEAR WNA1100 adapter. The profile is configured to connect automatically. I also moved over the default profile for the Native WIFI. Win7 always tries to connect to the default Native WIFI profile and not the profile that I created. Also, when I restart Win7, the default profile for the native WIFI moves to the top of the Profiles list. Also, when I try to change the default Native WIFI profile to use security WPA2 - PSK (AES) instead of WEP, it allows me to make changes, but he comes back to WEP after it treats changes and attempts to connect to the network. How can I fix so that Win7 will use my profile to connect to my home WIFI network and not the Native WIFI as the default profile. Win7 still connect using the default profile of NativeWIFI despite installing a different profile in Control Panel 'Wireless Networks '. I know that I can edit this profile by default, but anyone know how tell Win7 to use a different profile than the default? I tried to change the positions of the profile so that I want to use is facing up, but no, still uses the default. If I try to remove it, it comes back.
  After removing the two profiles and adding the profile for my home network, Win7 automatically added the default profile for the return NativeWIFI. My profile is configured to automatically connect to the network using WPA2 - PSK (AES) security and the default profile for the NativeWIFI (use WEP security) is the Win7 Setup to manually connect. Also, Win7 puts the default profile for the NativeWIFI above my profile. Also, when I delete the profile by default the NativeWIFI, Win7 it always puts back and he goes over my profile. This is starting to resemble the Win7 manage wireless mechanism for allowing users to add and prioritize the profiles of school boards does not work. Here's another thing that happens: when I try to change the security for the profile default of NativeWIFI to WPA2 - PSK (AES) of WEP, Win7 allows me to make changes, but it is up to the WEP after it processes the changes and tries to connect to the network. This seems too much for me, it's a problem with Win7. If I could do this job, so I need not to set up a second profile.
  The adapter I use a NETGEAR WNA1100 works correctly and I use it without any problem. I have is with Win7 and the interface to 'manage wireless networks '. It will not honor the fact that the WIFI profile that I created for my home network must be connected to automatically I installed. He always wants to connect to the default profile NativeWIFI even if I set up my home network profile to connect automatically. I can do a manual connection for my home network without problem. It seems to me that it is a question of Win7.
  Kind regards
  QRP

  Thank you very much - Netgear seems to have finally accepted as the default network!  If all goes well it will stay like this

  MAS

• Error using the JDBC connection from 12.4SE

  We are upgrading to 12.4 SE and explore using JDBC, rather than rely on ODBC connections.  We run on windows and connect to SQLServer2012.  I found in the administration guide how to set up.  After having GENDAW32 the analysis falls down.

  I tried with sometimes a JTDS driver as well as the microsoft JDBC driver.

  With the driver microsoft is the error:

  SQL Server supports the feature queued at the connection level only. Use the connection.setHoldability () method.

  With JTDS driver error is:

  CLOSE_CURSORS_AT_COMMIT option is not currently supported by the setHoldability method.

  Anyone has any ideas how to fix?  All database settings, to change?

  My DBHandler settings.  Note the microsoft driver failed with the same message without worrying about selectMethod was there or failed

  < DBHandler:AMSMRL >

  ; Class = ODBC

  Class = JDBC

  CreateIndex = No

  Passwd = ~ ENCRYPTED HoHwiD8meYLLIiEGgtE_OA

  ; Server = AMSMRL

  Server = com.microsoft.sqlserver.jdbc.SQLServerDriver; jdbc:sqlserver://server_name_here;databaseName=AMSMRL;sendStringParamatersAsUnicode=false;selectMethod=cursor

  ;  Server = net.sourceforge.jtds.jdbc.Driver; jdbc:jtds:sqlserver://server_name_here/AMSMRL

  Debug = Yes

  Hello

  It is a problem with SQL Server and DB Oracle Documaker JDBC Manager in 12.4.0 GA release.

  You will need a fix/patch that should be remedied.

  Kind regards

  -Steve

• I have a problem with 'url not valid and cannot be loaded' also the site accuweather on my toolbar does not load, all I get is a sying note "connection error". The google homepage, I've always used is empty at the start of firefox.

  I had a problem where firefox crashed while the closing bbc iplayer site last night, I reebooted firefox and everything seemed in order until this morning. I cannot use the default Web page of google but you can use the uk version. When you try to solve the problem I get the "invalid message url."

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Solve problems with plugins like Flash or Java to solve the common problems of Firefox

• Sign in error using the Microsoft account for the custom domain

  Hello

  I'm trying to connect to Skype by using our business e-mail address that uses Windows Live Custom Domain service. After be identified using the link "Sign in with a Microsoft account", the usual "create an account or connect" appears, but two options ("I have a Skype account" and "I am new to Skype") leads to the following error after clicking 'Join Skype': 'there is a problem of signing with Microsoft account. Please try again or connect with Skype details rather than this'. I tried with the two Skype Desktop and on the Web.

  Any help is greatly appreciated...

  Thank you!

  Well, I managed to make it work by creating a new Skype account with the same email as my Microsoft Account address.

• Sudden error using the creator of selections

  I have been using creative sanse of selections for Sansa e 200v1 for awhile.  All of a sudden, when I try and add a name to my playlist it comes back with an error message:

  "Wrong file or number name.

  No idea why this is happening?

  I used the playlist Sanse (even if it has been awhile) before and can't say I never had this problem. Your player is connected in MSC mode? Are you sure you have refreshed or updated the program after the connection, so this lookiing for a list of songs on the player and/or the card? You could try adding a song that is still in the list of the last time you used the program, but has since been removed from the drive.

• expand the disk error using the cmdlet set-hard drive

  Hello

  I will try to extend a vmdk with the command set-hard drive the rcli installed to my latptop througth, but I'm getting some sort of syntax error, I think.

  I connect the vCenter and can run commands very well...

  I use the following commands in the process:

  PS C:\ > get-disk hard-vm xxx_teco

  CapacityKB persistence Filename
  ----------                     -----------                                                    --------
  persistent 31457280 [brjgs163_Storage1_Local] xxx_teco/xxx_teco.vmdk
  persistent 5242880 [brjgs163_Storage1_Local] xxx_teco/xxx_teco_1.vmdk

  then:

  PS C:\ > set-hard drive - vm xxx_teco - hard drive ' [brjgs163_Storage1_Local] xxx_teco/xxx_teco_1.vmdk "-capcity 10485760

  then, got the error:

  Together-hard drive: Nao e possible associar o Parâmetro 'hard drive '. NAO e possible Converter "[brjgs163_Storage1_Local]" o valor homes don't do tipo "System.String" no type "VMware.VimAutomation.Types.HardDisk".
  Em linha:1 caractere:36 + set-hard drive - vm xxx_teco - hard disk < < < < [brjgs163_Storage1_Local] xxx_teco/xxx_teco_1.vmdk - capcity 10485760
  + CategoryInfo: InvalidArgument: (:)) [game-hard drive], ParameterBindingException)
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.Commands.SetHardDisk

  I have tryied somehow different to specify the disk hard but without success... always get these errors of messages...

  any help, please.

  The cmdlet Set-HDD wants something, such that returned by Get - hard drive to the hard drive setting.

  Easier is to use the pipeline (see also example 1 on the hard disk-Get help).

  get-disk hard - vm xxx_teco | where {$_.} {Name - eq ' Hard disk 2 "} | whole-disk hard-capcity 10485760

  
  

• Error using the ColdFusion/Flex Application Wizard

  I'm looking forward to use the CRUD from the CF/Flex Application Wizard features. After 4 hours of trying to find the problem, however, maybe someone else can help. The wizard is able to locate and work with a SQL Server 2005 data source and create the application. When I run it however, I have the following error:
  
  (mx.rpc::Fault) #0
  errorID = 0
  faultCode = "Client.Error.MessageSend".
  faultDetail = "error Channel.Connect.Failed NetConnection.Call.Failed: HTTP: status 405.
  faultString = "send failed".
  message = "faultCode: Client.Error.MessageSend".
  faultString = "send failed".
  faultDetail = "error Channel.Connect.Failed NetConnection.Call.Failed: HTTP: status 405.
  name = "Error".
  rootCause = (Object) #1
  Code = "NetConnection.Call.Failed".
  Description = "HTTP: status 405.
  Details = "" http://localhost/flex2gateway " "
  Level = "error".
  
  1 flex Integration is enabled on my 7.0.2 Server
  2. it looks like a mapping problem
  
  Someone, help please?
  Christian Briggs
  
  

  It was after all the configuration file. Thanks for your help.

  The problem: was always set to false. Thank you!

• can connect by using the ip address, but not by using web address settings?

  Try to connect to the internet using access point mobile Windows 7 Firefox browser.
  I can access a Web site by using the ip address using however nothing www.msn.com or whatever it is.
  In the connection to the internet in Network Options window that I have no idea of what to put in there, I have tried auto that nothing works

  (hit the uppercase text - c)

  There servers DNS Setup correctly?

  • http://KB.mozillazine.org/Error_loading_websites#DNS

• Re: Satellite Pro L - error using the recovery media creator

  Try to copy in memory USB, using Recovery Media Creator, original image from the Pc; just in case of future problems, I get this message: error 040 EAE-02-000000000.
  No idea what this means?.

  Thank you

  Hello

  Have you tried another USB key? The stick is probably defective, so the recovery media can t create successfully.

  Also format the stick before using the recovery media creator.

• Cannot connect - error loading the database...

  Hello

  Since last night find it me impossible to log in on my Skype.

  He puts me "error loading the database. Skype." It is possible that another instance of Skype to use it.

  I have reinstalled Skype, restart my pc, close all programs that could use it.

  My husband get a leverage son skpe without pb so it comes well d a pb with my nickname... going to Word of the change back I. Despite all this, I still have the same message that appears! 1

  did anyone have the same pb? and how he made it?

  Please pour your help!

  Rrbonjour

  so I did well the manip: Task Manager, process shutdown Skype.

  then relaunch the application, but it gives me the same result...

  I made a new system more earlier but it's restore gives me the same result...

  I asked a third person open my account on another pc and ca works... so it just my pc, not a hacking, (already it reassures me!)

  My spouse does so well to open Skype with his nickname but I still nothing.

  Application rattachee a Skype name can she used Lun?

• How many phone numbers can be connected simultaneously, use the most and merge buttons

  How many numbers phones can be connected at the same time, use the most and fusion of the buttons after you make the first call?

  It depends on your operator.

  It's been a few years since I've really looked into it, but I think that AT & T supports up to 5 concurrent calls. I know that other major U.S. carriers support less, but I don't remember the exact numbers. I want to say that Verizon and Sprint are in charge 3 and T-Mobile supports 2, but my memory on this subject is blurred.

  Contact your operator for more information.

• Connection by using the stack of Toshiba BT using Service GUID.

  Hello
  I need you connect using the battery of Toshiba BT using Service GUID.
  Can someone help me with this?

  Hello

  Yes, maybe someone can help you if you offer more details about you and your problem:
  -Portable
  -Operating system

  In addition, it would be interesting to know what device you want to connect, and you understand under Service GUID