Containing the window rolls back down when you insert a VI in a subgroup of experts

Similar Questions

• Is it possible to make a composition that appears (rolling) click to roll back again when you click the trigger?

  Looks like that he has seen no option to hide the composition in the horizontal "rolling" selection

  Here you can see my problem
  Muse question - should not hide the wheelchair composition yet? -YouTube

  Best regards and thanks in advance!

  Elias Nielsen

  To close, make sure first that "hide all initially" is checked (this isn't to close, but for your application that must be checked)

  You can not (to my knowledge) close it and open it when the click on. the reason for this is impenetrable.

  So what you can do is either change your transition to the "fading".

  or go into the settings, change the transition to horizontal (as you have) and add a close button (in the menu, it has an option for her)

  It's one of those things that needs to be fixed, but has not yet

• Error: 0 x 80070424 "cannot start the Windows Security Center service" when you try to start the Windows Security Center Service.

  original title: Error Code 0 x 80070424 on the Windows Firewall settings

  I can't turn on my Security Center Windows Service, when I try to turn it on it displays "cannot start service Security Center Windows"

  Then when I go to my firewall settings, it says "Windows Firewall don't use recommended settings to help protect your computer" I click "Use recommended settings" but it displays "Windows Firewall cannot change some of your settings 0 x 80070424 error code" how to fix this?

  Hello

  Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)

  This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)

  Download the two files from the registry

  http://download.bleepingcomputer.com/win-services/7/Mpssvc.reg

  The base filtering engine

  http://download.bleepingcomputer.com/win-services/7/BFE.reg

  Run them and click YES when you receive a UAC prompt

  Restart your PC

  Press Windows key + R and type

  regedit , and then click ok

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

  Right click on it -permissions

  Click ADD and type

  Everyone, and then click ok

  Now click on all

  Below, you have the permission for users

  Select full control, and then click ok

  Press Windows key + R and type

  services.msc , and then click ok

  Start the service database and then filtering engine service windows firewall

  If you still get this error

  Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.

  Download and launch this key

  Shared access

  Click YES when you receive a UAC prompt

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess

  Right-click on -permissions

  Click Add and type

  Select full control and everyone

  You should be able to start right now the firewall

  You can also Miss defender of windows security center, BITS and windows update services

  Download

  Security Center service

  http://download.bleepingcomputer.com/win-services/7/wscsvc.reg

  Windows Defender

  http://download.bleepingcomputer.com/win-services/7/WinDefend.reg

  BITS

  http://download.bleepingcomputer.com/win-services/7/bits.reg

  Windows Update

  http://download.bleepingcomputer.com/win-services/7/wuauserv.reg

  Run them and click YES when you receive a quick restart, UAC the PC
  

  
  

  Good luck

  * Edit *.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

• check the trigger quantity - at hand when you insert the order quantity

  Jin
  I have problem with trigger, I use the OE schema
  I have the form master / detail for orders and Order Details, that I need when I insert the order quantity to check the quantity available for each product using the trigger
  I use oracle 10g developer
  any help would be appreciated
  Thank you very much

  2MEO wrote:

  Bamba says:
  What is the structure of your database? and this code that you write?

  don't tell that you don't know how write the SQL query :)

  Thank you for your quick response
  I can write the SQL query
  I use these lines:

  SELECT quantity_on_hand
  INVENTORIES
  WHERE Product_ID =: Product_ID;
  IF: quantity > Quantity_on_hand THEN
  MESSAGE ("the inventory is not enough");
  END IF;

  Why do you think I can't write same SQL query?
  Thank you Bailey

  The query is bad :) there is no INTO clause

  Write it on quantity WHEN-VALIDATE-ITEM and KEY-NEXT-ITEM

   declare
     vquantity number;
  begin
   SELECT quantity_on_hand
    into vquantity
    FROM INVENTORIES
   WHERE Product_ID = :Product_ID;
  
   IF :quantity > vquantity THEN
      MESSAGE ('the inventory is not enough');
       raise form_trigger_failure;
   else
      null; -- or next_item if you are using KEY NEXT ITEM trigger
   END IF;
  
  Exception when no_data_found then
    message('Invalid product ID');
   raise form_trigger_failure;
  END;
  

• My computer (gateway GT5404) becomes noisy when you run the windows media player, often when you use the interent and frequently when loading files/photos or download. What is a hard drive problem?

  My computer did this for about a year. It is currently 4 years with 1 GB of RAM.

  JBW

  Could be HD or thermal / fan.  I want to download cpu - z and gpu - z (both free) to check the time.

  I also get the HD of the Lim diagnostic utility and run it to check the HD

• Selected pass contains a string indicator combo box when you press the Enter key

  Hello

  How to pass selected contains a string indicator combo box when you press the enter keyboard key?

  Right now I use a button to send the command selected in the combox to string indicator.

  The photos shows a combo box with the button that I use to send to the indicator as example.

  After the user selects the text to pass, "send the cmd" button must be pressed to pass the string.

  I need to pass the selected string when the user press enter on the keyboard rather than press the button 'send cmd '.

  Kindly to you needing help.

  Hello

  You can use a structure of the event to capture keystrokes and filter, transmit only the drop-down list box "value of the indicator of channel when you press the return or enter key."

  Let me know it the joint allows an example (in LV 8.6).

• ADE 2.0 and 4.0 do not work with Windows 10. The next problem is generated when you try to download a book from the public library.    Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The next problem is generated when you try to download a book from the public library.

  Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The work around works of Jean.  It would be nice if Adobe provided a real difficulty however.

  I have ADE installed 4.03.  The problem will occur as soon as that ADE is closed and reopened.    It takes so the patch every time allows you to download a book ADE.

  1. for Overdrive - select a book and click Download. -pop - up - select - Save file. - under the open with select - acsm_auto_file - download the file of social mobilization in your download directory.

  2. expand the Explorer open the file - go up to the OS (c)-

  -go to Program files (x 86) - enlarge

  -to enlarge Adobe

  -go to Adobe Digital Editions and the left click.

  -On the right part of the screen right click on Digitaleditions.exe.

  -Pop - up menu - on the left, click PROPERTIES

  -Pop up to select COMPATIBILITY

  -at the top of the menu compatibility, choose the resolution of compatibility issues run

  -Pop up to select the troubleshooting program

  -Pop up choose the program worked in earlier versions of windows, etc.

  -on the left, click NEXT

  -POP up - which version etc? Choose that I don't KNOW

  -on the left, click NEXT

  -POP - up - left click Test Program-

  -AT THE TOOL Avantek of window screen, a FLASHING ICON will appear - left-click on the icon - a pop-up will ask you if you want this program to change etc. On the left, click Yes.

  3. ADE open - make sure ADE is in library view.

  -Left click on FILE and then select Add to LIBRARY from the menu drop down.

  -POP UP - down to the right to choose the type of file of social mobilization

  -left side of the pop up to choose the directory where you downloaded the file of the CMHA.

  -Select the file of the CMHA in the right side of the window and on the left, click OPEN

  -It should work, but you have to go through the whole routine if you close ADE.

  I HOPE ADOBE will solve this problem. With each update of Windows 10 ADE seems crumbles a bit more.

• I get the following error code 80070bc9 when you try to do window upsdates

  I get the following error code 80070BC9 when you try to do a Windows Update. All of my updates have failed in the last three months and most have failed in the last six months. I found this problem when you try to install Itunes and received the error HRESLUT:0x8007054F. After researching this error, I was sharp may receive updates. Help, please.

  Hello Kristen,

  Follow the steps mentioned below:

  Step 1:

  Temporarily disable or uninstall the security software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Reset components Windows Update the link below:

  How to reset the Windows Update components
  http://support.Microsoft.com/kb/971058

  Note: Click on run in the file download dialog box and follow the steps described in the fix it Wizard.

  Hope this helps

• Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  # You have need Vista compatible drivers - it's the only way it will work.  Installing bad drivers can even to hurt the unit or even your system to not try.  Get a new USB device that works with Vista, and has the correct drivers.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• -Pop-up menu (allows you to choose what program you use to open the file) when you insert sim or cd does not appear

  When a disk or sim card or data storage device is connected to the computer there should be a menu pop up that allows you to choose which program to use to open the file. This is no longer the case. Any ideas how to restore it?

  Hi John,.

  1 are you referring to AutoPlay settings in Windows XP?

  2. did you of recent changes on the system?

  If you are referring to AutoPlay settings in Windows XP, you can see the following article in Windows XP to enable the feature.

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  You can also consult the following article:

  How to change or choose the program that starts when you double-click a file in Windows XP

• AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Original title: computer disc drive

  Download or CD extract of music reading, record music, download CD etc... Before my hard drive had to be replaced, when a disc is inserted into my computer, a window appears, asking what you want to do... Burn music, Rip, copy in folder etc... now when I insert a disk, the window no longer appears, which gives you options and you get to this site... How can I get that back?

  Hey Big-Mack,

  Try the steps of troubleshooting mentioned in the following article and check the result.
  See the enforcement function automatic or AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  If the problem persists, run the Autoplay Repair Wizard and check the result.
  See Autoplay Repair Wizard

  Play functionality; New in Windows Media Player 12 makes it easy to listen to the music, video and photos from your computer to other computers, TVs or stereo on your home network.
  For more information, see play in

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows mail gives error when you try to send 0x800ccc0e

  Windows mail gives error when you try to send 0x800ccc0e

  Check if you can access your e-mail via webmail.  If it works fine and that you always have problems in WinMail, then delete your account e-mail, then compact and repair the database (www.oehelp.com/WMUtil/) and then add your account to e-mail back again.  Often, this solves these problems.

  Steve

• How to delete a contact in the menu 'To' drop down when starting a new email?

  How to delete a contact in the menu 'To' drop down when starting a new email?  Email is no longer in my list of contacts, but he continues to appear in the menu drop down and too often I am wrong send something to the wrong email since it is at the top of the drop-down list.

  2 possibilities:

  1. you have an invitation, that you still need to answer. The name stays on until you refuse the invitation. Then it will go away.

  Open outlook.com > top left, place your cursor on the Outlook logo > an arrow will appear > click on the arrow > click on people > here's the window of your people.

  Toolbar at the top, click on manage the > click on View Invitations > do you see an invitation? If so, decline the prompt will remove the names of th.

  2. There may be a suggestion of the application of the 'AutoComplete suggestion» It gives you the names so that you, at the same time, sent emails.

  You can remove this suggestion by doing this...

  Open outlook.com > top right, next to your name, click on the gear icon > click on e-mail settings more > under customization of Outlook, click Advanced Privacy settings > click the front point 'Only suggest people in my contact list' > click on save when finished.

  t-4-2

• "this file does not have a program associated with it" message when you insert the sd card

  When I insert an SD card into my computer, I get a message that says f:\ that this file does not have a program associated with it... I know I can set default programs with the types of files in the Control Panel, but how do you recognize what to do when I insert an SD card in the computer?

  Windows 7
  The problem is caused by the automatic game changing options, this can sometimes happen when you install a new program, but they can easily be changed back. Click 'start' at the bottom left, go into "default programs" on the right side of the list (under computer / doc/images etc.) select "Change AutoPlay settings.
  You will find prob some of the sections had the new auto run program, just edit those you want (or all) "ask me every time", you will find that when you insert an sd card, you get the options normal download, copy, etc. as usual.

• Explorer Windows has stopped working when you click FLVfile

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER

  Hello

  What version of the windows operating system is installed in the computer?

  I suggest you to see link and check. (That applies to windows vista and windows 7)?

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.