Context for the cfset tag validation error.

Similar Questions

• Context for the cfelseif tag validation error

  I'm not sure what Miss me in the code here.  I get an error of validatiaon context for the cfelseif tag. Any help would be greatly appreciated.

  I guess that your done CFELSEIF part of a CFIF block who you wanted to just not show.

  Cannot start a block IF with CFELSEIF

• Error when parsing the file ' value of the 'src' attribute is not valid; must be a URI'.  ERROR (RSC-005) to "Hetgeheimfietsen.epub/OEBPS/toc.xhtml" (line 10, col 10): error while parsing the file ' "ol" element not allowed here; wait for the end-tag of t

  The members of the Forum kan help you

  Validation by using version 3.0.1 EPUB rules.

  ()https://github.com/IDPF/epubcheck( )

  December 9, 2015 15:27:33 THIS

  ---------------------------------------------------

  WARNING (OPF-007) to 'Hetgeheimfietsen.epub/OEBPS/content.opf' (line 2, column 227):

  Re-declaration of prefix reserved "rendition."

  ERROR (RSC-005) to "Hetgeheimfietsen.epub/OEBPS/toc.xhtml" (line 10, col 10):

  Error when parsing the file ' "ol" element not allowed here; waiting for the end-tag of the element or element "li" '.

  WARNING (CSS-007) to "Hetgeheimfietsen.epub/OEBPS/css/idGeneratedStyles_0.css" (line 60, col 2):

  Police made OEBPS/font/CambriaMath.ttc refers to fonts not standard type application/x-police-FTT.

  WARNING (PKG-012) to "Hetgeheimfietsen.epub/OEBPS/De_Alpe_d'Huez-1.xhtml":

  File name contains following non ascii characters: '. You want to change the name of the file.

  WARNING (PKG-012) to "Hetgeheimfietsen.epub/OEBPS/De_Alpe_d'Huez-2.xhtml":

  File name contains following non ascii characters: '. You want to change the name of the file.

  Check the finish with warnings or errors!

  In the file Toc delete the second "ol", as well as closing like Epubcheck duplicate codes

  the one after the other (delete the other)

• Photoshop Elements 11, Windows 7 PC. When you try to make a Photo montage I get an error "not available for the creation of valid size.

  Hello

  Need help...  When you try to make a Photo montage I get an error "not available for the creation of valid size.

  Photoshop Elements 11, Windows 7 PC.

  Thank you

  Error "not available for the creation of valid size.

• loop over a list with & quot; Insert & quot; in the cfquery tag valid?

  looping over a list with 'insert' in the cfquery tag valid? He
  throws any errors and inserted into the table without any
  problems, but just wonder if it is possible to use since when I tried
  Select article twice in a cfquery, it executes only the first.
  
  < cfquery >
  Select the test in testdata
  
  Select othertest from differentdata
  < / cfquery >
  
  

  If it works, it is valid. Different from the db support different syntaxes on this issue. A way that would work for all db's

  insert into sometable
  (fields)
  
  Select somevalues
  from somewhere
  
  Union
  closing tags.

• My genuine Window Vista could not search for the new update, or errors are: Code 80073712

  My genuine Window Vista could not search for the new update, or errors are: Code 80073712

  If you forget to say 'thank you '?

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821

  0 x 80073712 ERROR_SXS_COMPONENT_STORE_CORRUPT component store is in an inconsistent state.

  TaurArian [MVP] 2005-2010 - Update Services

• Problems installing drivers for printer EPSON L110. Error message "Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.»

  Original title: trouble installing the drivers for my printer.

  Hello

  I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.

  Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.

  I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.

  TKS

  Gerard

  Hi, Germain,.

  This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.

  http://www.Epson.co.in/epson_india/ink_tank_system_printers/product.page?product_name=Epson_L110&tab_index=4

  See the articles for more information.

  Install a printer

  Find and install printer drivers in Windows 7

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• AddNode cmd failed for the secondary node: internal error of AAM - agent could not start. : unknown error HA

  I'm testing paths to upgrade to vSphere ESX 3.5 update 4 on an IBM BladeCenter with 2 hs21 xm Server blades; I am going through several problems, and the last is the one mentioned in the subject of this thread.

  In this scenario, I've upgraded successfully vCenter then I took all the virtual machines on a single host esx 3.5, I removed the other host in the cluster, and then vcenter, then I did a new install of vSphere, I reconnected it the host to the cluster then I did all the procedure with the second node. In the end, I have two installed vSphere hosts but I had to disable my cluster HA always been, I get this error when I try to configure HA agents on the hosts, but I must say that the DRS ok works.

  In the release notes for vSphere, in the section known issues, I can read:

  "Upgrade of an ESX/ESXi 3.x host an ESX/ESXi 4.0 host results in a successful upgrade, but VMware HA reconfiguration may fail.

  When using vCenter Update Manager 4.0 to upgrade an ESX/ESXi 3.x ESX/ESXi 4.0 host, if the host part of an AP or DRS cluster, the update succeeds and the host is reconnected to vCenter Server, but HA reconfiguration may fail. The following error message in the summary of the host tab: HA agent has an error: cmd addnode failed for the main node: internal error of AAM - agent could not be started. : HA unknown error.

  Solution: manually reconfigure HA by right-clicking on the host and select Reconfigure for VMware HA. »

  The problem is that of workaround does not work for me, so I was wondering if someone, is once again able to help me with this problem.

  Thanks in advance for your support.

  Hi Caddo,

  I had the same problem with one of my hosts.  It was resolved after disabling HA on the cluster and enabling again.

  Mirko

• get the rowid not valid error when using for update

  Hi gurus,

  I'm practicing the updates in the sliders. Layout error invalid ROWID executing script below. Please help me.

  create the table dup_employees in select * from employees;

  declare

  cursor c1 is select *.

  of e dup_employees

  where e.COMMISSION_PCT is null

  update the COMMISSION_PCT wait 10;

  SheikYerbouti c1% rowtype;

  Start

  Open c1;

  loop

  Fetch c1 into SheikYerbouti.

  Update e dup_employees

  Set e.COMMISSION_PCT = 0.1

  the location being c1;

  When exit c1% notfound;

  end loop;

  end;

  /

  declare

  *

  ERROR on line 1:

  ORA-01410: invalid ROWID

  ORA-06512: at line 11 level

  See you soon,.

  Suri

  Fetch c1 into SheikYerbouti.

  Update e dup_employees

  Set e.COMMISSION_PCT = 0.1

  where rowid = emp_rec.rid;

  When exit c1% notfound;

  Care to guess what exception you will get when the UPDATE statement is performed when EXTRACTION returns no line?

  Your code has the same default Moazzam already mentioned.

• Popup is get closed after the entity level validation error.

  Hello

  I have a requirement where I am creates a line entity in a popup. In the context menu, I have an attribute which is mandatory under certain conditions. To do this, I said that EO level method validator that checks if filed value is entered or not when it is required.

  This validation happens correctly, I am able to see the error message in the user interface. But the problem is, popup closer, when I click on ' save record ' (this button calls the validation logic for the record) button in the user interface. " Becuse in the logic of the 'save' button, I close the popup (appellant hidePopup) after committing the registration. But it should only occur when the validation is successful. But it happens the same validation is not as successful. I mean, after the validation logic that he goes to the next run of line code. And the error message is displayed only after the execution of all the lines inside the method of the Save"" button.

  How can I limit the logic of hide popup on successful validation.

  Jdev version: 11.1.1.7.0

  Kind regards

  Dietsch.

  Hello

  When you run the validation operation programmatically try to see if there are errors;

  .

  .

  .

  operationBinding.execute ();

  If (operationBinding.getErrors () .isEmpty ()) {}

  Without exception, the operation is success

  } else {}

  Exception is thrown by the method, handle it here

  OperationBinding::getErrors() return list of local

  The list of errorList = operationBinding.getErrors ();

  Alternative route ' on error ' go here

  }

  If there is no error not to close the popup while if there isn't one, then close.

• biz catalyst gives the "(SHARED_UNKNOWN_ERROR:22) validation error" "

  I worked on this site of muse in February and has just returned to her.

  He had been the catalyst for biz in February.

  now I get this validation error

  It is said

  An unknown authentication error occurred using your Adobe ID, (SHARED_UNKNOWN_ERROR:22)

  Help, please!

  Hello

  This error comes usually when Muse is not synchronized with creative cloud application.

  Please try the following steps to resolve this problem.

  1. the signal of the Muse of help > disconnection.

  2. leave the Muse

  3. the signal off creative cloud application and sign in again. Connect and disconnect activate Cloud Creative applications

  5. start the Muse of the creative cloud applications tab and then try to publish.

  Kind regards

  Vivek

• SOA Gateway configuration for R12.2.3 - Validation error

  Hello

  I'm following document Oracle Support

  Installation of Oracle E-Business Suite integrated SOA Gateway, version 12.2 (Doc ID 1311068.1()

  for the installation of Gateway SOA for R12.2.3.

  After completing the configuration steps during the validation of the configuration in Section 5,

  I run the following command to check on the the Oracle SOA Suite side

  Ant f $JAVA_TOP/oracle/apps/fnd/isg/ant/isgDesigner.xml DiagnoseAPPSetup - Dverbose = WE

  I get the result

  BuildFile: /d01/oracle/PROD/fs1/EBSapps/comn/java/classes/oracle/apps/fnd/isg/ant/isgDesigner.xml

  testIndependentProperties:

  testOperatingSystem:

  populateContextPropWin:

  populateContextPropUnix:

  populateContextProp:

  read_dbcFile:

  [echo] dbc file location /d01/oracle/PROD/fs1/inst/apps/PROD_kc1dvebsr122as/appl/fnd/12.0.0/secure/PROD.dbc

  validate_dbcFile:

  DiagnoseAPPSetup:

  [echo] Diagnistic APP tests run

  [echo] DBC File=/d01/oracle/PROD/fs1/inst/apps/PROD_kc1dvebsr122as/appl/fnd/12.0.0/secure/PROD.dbc

  [echo] Context File=/d01/oracle/PROD/fs1/inst/apps/PROD_kc1dvebsr122as/soa/isgagent.properties

  [java] Call of checkInitialization-

  [java] Call of checkContextInitialization-

  [java] ContextManager Nom_agent: PROD

  [java] ContextManager bootStrapPropertyFileName: /d01/oracle/PROD/fs1/inst/apps/PROD_kc1dvebsr122as/soa/isgagent.properties

  [java] Call of checkSOAMBeanServerConnection-

  [java] Call of checkApplicationTarget-

  [java] Call of checkISGServiceProvider-

  [java] Call of checkPartition-

  [java] Call of checkDataSource-

  [java] Call of checkOutboundConnectionFactory-

  [java] Call of checkISGMbeans-

  [java] For App Server side impact test could not be undertaken because no targets for the deployment of isgserviceprovider is found.

  [java] This could happen if the file properties of context on server suite soa is not correct. Check ISG_RUNTIME_CONTEXT and ISG_AGENT_JNDI_NAMES in the file isg.properties on the machine of SOA Suite.

  [java]  Value of ISG_RUNTIME_CONTEXT must be APP and ISG_AGENT_JNDI_NAMES should also be correct in referring to a valid data source. ISG deploy to a server managed after their correction and re-run the diagnosis.

  [java] Report will show only the results for a few cases of test on the side of the officer.

  [java]

  [java] Report file is: /d01/oracle/PROD/fs1/EBSapps/comn/java/classes/oracle/apps/fnd/isg/ant/ISGAppDiagnosticsReport.xml

  [echo]

  BUILD SUCCESSFULLY

  Total time: 2 seconds

  I checked the two parameters

  ISG_RUNTIME_CONTEXT and ISG_AGENT_JNDI_NAMES in the isg.properties filed on the machine of SOA Suite and they are as expected.

  Can someone direct me more how I consider and solve this problem?

  Please note that I use the pre-built Oracle SOA Suite of Virtual Box (http://www.oracle.com/technetwork/middleware/soasuite/learnmore/vmsoa-172279.html)

  for my server SOA Suite and EBS install is R12.2.3 - install the vision.

  Any help is greatly appreciated.

  Thank you

  Rohit

  Hello

  I was able to solve the problem and now able to generate SOAP based web services successfully.

  The problem has been resolved by updating the hosts file with the IP address for the SOA Suite server VM.

  Thank you

  Rohit

• regular expression for the xml tags

  Dear smart people of the labview world.

  I have a question about how to match the names of xml text elements.

  The image that I have some xml, for example:

  Peter

  13

  and I want to match all of the names of elements, that is to say: no, son, grandson, age, regardless of any attribute have these items. There is a regular expression, I can loop, that can do this? (Something like "\<.+\> ". "") It is no good because it matches the entire xml string.) I'd really only two different expressions, one for the match start elements, e.g. and one for the correspondence of the elements, for example.

  Thanks for your help in advance!

  Paul.

  The site Of regular Expressions will be very convenient.

  They have some good tutorials on regexp with a demo of the XML tags:

  Here is a small excerpt:

  The regular expression <\i\c*\s*>matches an opening of the XML without the attributes tag corresponds to a closing tag. <\i\c*(\s+\i\c*\s*=\s*("[^"]*"|'[^']*'))*\s*>corresponds to an opening with a number any attributes. Put all together, <(\i\c*(\s+\i\c*\s*=\s*("[^"]*"|'[^']*'))*| i\c*)\s*="">corresponds to an opening with attributes or a closing tag.  (source)

  If you want advanced XML analysis I suggest JKI XML toolkit.

  Tone

• Certificate for the hot spot ISE error

  We have just install an ISE Server (Version 1.3.0.876) and that you have set up a hot spot for guest users portal. Everything on the Portal works fine, however! The question that we run is, we installed a public cert signed by a public CA (Starfield CA), but when you can go to the EULA page on the ISE server, they get an error the path of certificate cert becomes not filled. I watch the cert that it gets, and the path contains only the issued cert, not the case there are on it. (I think that cert requests the browser to go to a site to download the latest public certification for the issued cert)

  I can work around this in order to allow this IP address he strikes in the ACL on the WLC, but I would simply like to have deliver ISE cert WITH public cases that's just in case the IP changes, or it is actually hitting a VIP and it comes to be responsive would be.

  Does anyone know how this is done?

  I tried the following:

  From the cert out of ISE, added public certification in the server certificate and added to the ISE, no luck. (I can this is done properly, let me know if this should have worked)

  Added the case public in ISE and self-confidence, no luck with either.

  Let me know! Thank you guys!

  Good job to fix the problem and for taking the time to post back here! (+ 5 from me).

  What is interesting is that the ISE should warn you and automatically restart the server when a new HTTPs certificate is installed. I wonder if this behavior may be changed with the last patch/version. In both cases, glad your problem is solved!

  Now, you must mark the thread as "answered" :)

• get the entity level validation error after clicking the Cancel button

  Hi Experts,

  JDEV 12.1.3.0

  I have a popup and I create several rows in a table. And when you click on CANCEL, I get the validation error level feature on the home page.

  Cancel call the method below and also set immediate = "true".

  /*

  * return allchanges

  */

  {} public void refreshRemoveNewRow (rank)

  If ((row) .getNewRowState (ViewRowImpl) () == Row.STATUS_INITIALIZED) {}

  Row.Refresh (Row.REFRESH_UNDO_CHANGES + Row.REFRESH_REMOVE_NEW_ROWS + Row.REFRESH_FORGET_NEW_ROWS);

  } else {}

  Row.Refresh (Row.REFRESH_UNDO_CHANGES + Row.REFRESH_FORGET_NEW_ROWS);

  }

  }

  If I try with Rollback I get Transaction has expired. My behavior of workflow is also use existing Transaction if Possible.

  Thank you

  Roy

  Hello

  Try again with

  public void refreshRemoveNewRow(Row row) {
     if (((ViewRowImpl)row).getNewRowState() == Row.STATUS_INITIALIZED) {
           row.refresh(Row.REFRESH_UNDO_CHANGES +  Row.REFRESH_REMOVE_NEW_ROWS);
      } else {
           row.refresh(Row.REFRESH_UNDO_CHANGES + Row.REFRESH_FORGET_NEW_ROWS);
      }
  }
  

  Beside that, can you post the jdev console stack trace, to see which exactly entity and validator is in question...