control and selection of choice drop-down

Similar Questions

• Why, when I type in the address bar and select from the drop-down list, I seem to "click on" on one of the toolbar buttons?

  I noticed recently that, sometimes, when I chose an entry in the drop-down list after I started typing in the address bar, I would get a different page than I wanted to. It turned out that I was actually clicking the bookmarks toolbar button that has been hidden under the list entry, I thought I was clicking.

  Hi, thanks, but disabling hardware acceleration does not fix it. However, I just swapped my mouse, and seems not to happen anymore!

• Select from the drop-down list and populate a list in another menu drop down

  I have a drop down list with 10 items in the list. If possible, would like for a selection in the drop-down list to populate a drop-down list with another list of selections. Each of the 10 points in the first list each will have a list of different options in the second drop-down list. I don't know how to build this solution.

  Thank you

  MDawn

  Hello

  It was because of the clear rawValue script that I put in the output from the drop-down list event businessFunction.

  I fixed it:

  // clear the current selection in the department dropdown
  dept0.rawValue = null;
  dept0.execEvent("exit");
  

  https://Acrobat.com/#d=MrWYQbTZIR7xJQDlm5ZSLg

  Good luck

  Niall

• Populate a drop-down list based on selected in a drop-down list in a separate table

  Good day all.

  This may seem a simple question for most, but... He had me frustrated trying to figure out.

  I'm trying to fill in a drop-down list that is based on what is selected in another drop-down list.

  Let me explain what I've done so far.

  Life cycle of Designer 8.05.2

  When I got the two drop-down lists in the same table, I've not had a problem. The code I used is

  The table name is "table1".

  if (directorate.rawValue == '1')

  {

  division.clearItems ();

  division.addItem ("select" "")

  }

  I was asked to move things and now 'division' is located in 'Table2 '.

  I know that I need the "Table1" reference, but I'm running into a syntax error. I tried the following code;

  if (Table1 Row1 directorate.rawValue == '1')

  {

  division.clearItems ();

  division.addItem ("make a choice")

  }

  if (Table1.Row1.directorate.rawValue == '1')

  {

  division.clearItems ();

  division.addItem ("make a choice")

  }

  Any help would be appreciated

  Chomp

  You are missing a semicolon at the end of the line, addItem, and the second code example, you have no periods in the SOM (Table1 Row1 direction) reference.

  The best way to get the path to another field is to ctrl-click on the ground while you are in the script editor.

• Subforms making visible depending on what is selected in the drop-down list

  Good day to all;

  Looks like I'm '0' batting today. For some reason I'm not able to get a number of things working today... Maybe I should just write off that day as a loss... ; >)

  Another way; I'm trying, unsuccessfully, to get forms to become visible depending on what is selected from a drop-down list. I tried to use "switch" (see below), but I end up getting the famous error "syntax".

  I also tried an 'if' statement (see below), but that doesn't seem to work either.

  What I would like to ask you is when a user selects 1 of 2 choices 1 2 forms sub becomes visible.

  So, if the user has selected in the drop-down list of the bad and they choose now to select the right pair, I want the form incorrect sub to again become invisible.

  I'd appreciate any help

  switch (this.rawValue)

  {

  case "2" :

  staffing_inter. Presence = 'visible'

  on the other

  staffing_inter. Presence = 'hidden';

  breaking ;

  }

  IF statement

  if (this.rawValue = 2)

  {

  staffing_inter. Presence = 'visible'

  }

  else {

  staffing_inter. Presence = 'hidden';

  }

  Number of things...

  What statements do not use "else". You must specify each value. But you can nest another code in a statement that.

  Using a drop down you need to get the new value when the selection is made.

  Thus (guess what you did 'Specify the item values' liaison for the DDL tab):

  var newValue = this.boundItem(xfa.event.newText);
  switch(newValue){
       case "1":
            //code
       break;
       case "2":
            //code
       break;
       //etc.
  }
  

  Or with your statement:

  var newValue = this.boundItem(xfa.event.newText);
  
  if(newValue = 2){
      staffing_inter.presence = "visible"
  }
  else{
       staffing_inter.presence = "hidden";
  }
  

• 31.1.0 and 31.1.2 drop down menu commands and commands "right button" very slow... what to do?

  My TB version 31.1.0 and 31.1.2 drop-down menu commands and commands "right button" very slow... All other menu programs bars will work perfectly. Tried disabling McAfee, no diff. TB collects e-mails, wrote e-mails to a normal speed without problem. Control S, V, P, etc work but slow... what to do?

  To diagnose problems with Thunderbird, try one of the following:

  • Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• Hello experts, I use Adobe forms in SAP. My question is, is there a any restriction for additem keyword in JavaScript? I mean, even if I use the keyword additem to add the name and value of a drop-down list, it adds up to 10000 files only. Please s

  Hello experts,

  I use Adobe Forms in SAP.

  My question is, is there a any restriction for additem keyword in JavaScript?

  I mean, even if I use the keyword additem to add the name and value of a drop-down list, it adds up to 10000 files only.

  Please sugest

  A drop-down list is the bad INTERFACE design where an element can contain more than 100 entries. It is very good in tests, but absolutely unacceptable if the form must be used by a person busy doing their work. The choice of Acrobat forms are limited, but consider a list box. Despite this, there may be limits imposed by the system or the implementation.

  Better would be

  (a) stop filling after awhile the list and add an entry saying several elements not shown, running report or use better filter

  (b) be available for all filtering of course lists

• How to set a repeating subform based on a value selected in a drop down list?

  Please forgive me if this is somewhere, but I spent a few hours searching and have not led to what.

  I have a drop-down list that allows the user to select the number of teams in you listing (1-5). Then I have a subform with all the necessary information for each team. I wish that the subform to repeat automatically based on the number selected in the drop-down list, because I need this information for each of the two teams by registering.

  Thank you!

  In the case of exit of the drop-down list, in formcalc, put something like:

  teams of var = $.rawValue

  var counter = 1

  While (counter< teams)="">

  Subform2.instanceManager.addInstance)

  Counter = counter + 1

  endwhile

  This assumes you have already 1 version of the subform. If you are a beginner with no condition (meter while doing<=>

• Filling of a numeric field by selecting from a drop-down list

  Hello all;

  I went through the 38 pages on the form now to try to understand it myself. I must have missed something or this day becomes medium long.

  I am filling a numeric field that is based on what is selected in a drop-down list box.

  For the test, I use only 2 fields

  DropDownList1 and digital Field1

  I If (DropDownList1.rawValue == 1) { }

  NumericField1.rawValue = 25;

  }

  On the other;

  (DropDownList1.rawValue == 2) { }

  NumericField1.rawValue = 35;

  }

  That worked. I am now getting the error "missing; before the statement

  "6:xfa: form1 [0]: #subform [0]: DropDownList [0]: output"

  Specify the value of points is checked in the tab links for DropDownList1.

  I said this with a single selection, who worked

  if (DropDownList1.rawValue == 1) { }

  NumericField1.rawValue = 25;

  }

  Thank you all

  Chomp

  If it's a copy/paste of your script, you have a semicolon after the "else" and "else" should be lowercase.

  And for nested IFS, you need an "else if", so:

  If (DropDownList1.rawValue == 1) {}

  NumericField1.rawValue = 25;

  }

  Else if (DropDownList1.rawValue == 2) {}

  NumericField1.rawValue = 35;

  }

  ElseIf...

  If you have a lot of statements, you might want to look at using a statement that may be easier to read.

  {Switch (DropDownList1.RawValue)}

  case '1 ':

  NumericField1.rawValue = 25;

  break;

  case '2 ':

  NumericField1.rawValue = 35;

  break;

  etc.

  }

• Get the value currently selected in the drop-down list

  Hello Zac,

  I have a question to get the current value in a drop in export UI. Currently I have a custom fall that I fill with UTF16 strings down. I set up as follows:

  Field order
  (1) exNewParamInfo ParamName;
  (2) exParamValues ParamValues;
  (3) ParamName.structVersion = 1;
  (4) safeStrCpy(ParamName.identifier, 256, ADBEVideoFieldType);     FieldType is considered an example of existing code
  (5) ParamName.paramType = exParamType_int;
  (6) ParamName.flags = exParamFlag_none;
  (7) ParamValues.structVersion = 1;
  (8) ParamValues.disabled = kPrFalse;
  (9) ParamValues.hidden = kPrFalse;
  (10) fieldOrderParam.paramValues = ParamValues;

  exportParamSuite-> AddParam (exporterPluginID,
  mgroupIndex,
  ADBEBasicVideoGroup,
  and ParamName);

  I can then load my dynamically generated strings in the fall down (in ProstProcessParams) and they are displayed correctly.

  Then, I call upon export

  exportParamSuite-> GetParamValue (exID, 0, ADBEBasicVideoGroup, & ParamValueToBeReturned);

  to get the current value.

  However, I'm not UTF16 string. My guess is that's because the value of this field is UTF16 and not int (that I put in place on the line 5). I tried to use exParamType_string, but it gives me an editable text field.

  Then, how we configure a drop custom down correctly to obtain the current values of the string of her?

  Thank you

  Petro

  
  

  Hey Petro,

  During exSelPostProcessParams, in your calls to the AddConstrainedValuePair(), you have defined a type of integer values to strings mapping.  You can use the same mapping to determine which channel has been selected in the drop-down menu of the integer value passed from GetParamValue().  Integer values can actually be more accurate, because due to the location, the strings may vary.

  Looking at the code, you can make limited value of pairs with parameters of type exParamType_string.

  Kind regards

  Zac

• How to restore section bookmarks to the top toolbar and in printing and closing a tab drop-down menu?

  Recently, a change has occurred which made me lose the "bookmarks toolbar" and "close tab" menu drop-down when I stop "Firefox".

  This has happened

  Each time Firefox opened

  == Bookmarks toolbar has disappeared. Closing menu gives no possibility to close the tab. Please provide steps to restore these options.

  Bookmarks toolbar has disappeared. Closing menu gives no possibility to close the tab. Please provide steps to restore these options.

• ADF Table and select one choice

  Hai everybody, please help.

  I have a page that contains the table and select a choice where the table record displays the current month and the choice of a select contain only months. When I select the month from the list, save the table will change based on the months that I have chosen. I have really no idea on how to perform this task.

  

  With the help of jdev version 11.1.1.7.0

  Thanks for your help.

  El

  Try to follow the following:

  1 - in the ViewObject (to which redirect the table) define the bind variable, this variable binding will filter the query (for example variable binding name is selectedMonth).

  2 - from the page, select the selectOneChoice and of the Inspector properties set value change listener method in backbean and autoSubmit = true.

  
     .
     .
  
  

  Method of earphone 3 months value change will be:

    public void monthValueChangeListener(ValueChangeEvent valueChangeEvent)
    {
      BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
      DCIteratorBinding iter = (DCIteratorBinding) bindings.get("TableIteratorName");//you can get iterator name from pageDef.
      ViewObject vo = iter.getViewObject();
      vo.setNamedWhereClauseParam("selectedMonth", valueChangeEvent.getNewValue());
      vo.executeQuery();
    }
  

  3. set table by selectOneChoice id partialTrigger

  
      .
      .
      .
  
  

• "Dimension" and "Metric" as dashboard drop-down guest

  Hi Experts,
  
  I'm looking for "Dimension" and "Metric" as dashboard drop-down invites. I can't paste the screenshot here so I have uploaded to picasa. Please see the screenshot below.
  
  https://picasaweb.Google.com/Salim.syed80/August222011
  
  My question is can we succeed in OBIEE 10 GB or do I go to 11g.
  
  Thanks in advance.
  
  Published by: Salim August 21, 2011 21:44

  Yes it is possible in 10 g.

  Please see the following links

  https://picasaweb.Google.com/106164973216668243480/August222011?AuthUser=0&feat=DirectLink

  Thank you
  V
  http://obieedeveloper.blogspot.com/

• Select from a drop-down list and the specified element values are displayed in the textfield

  I need for one to be able to select from a list drop-down and specified the item values appear in textfield.

  For example, if I select Amy

  If I select Bob

  If I select Jane

  Amy

  Bob

  Jane (I want to appear as shown in the list)

  I associated a value to each item in the drop-down list so that the choice is easy to compare and determine what initial (default) value to the value in the text field. In my drop down list change event, I have the following:

  var sNewSel = this.boundItem (xfa.event.newText);

  Switch (sNewSel)

  {

  case '1': / / Amy

  TextField1.rawValue = "Amy \n";

  break;

  Switch (sNewSel)

  {

  case '2': / / Bob

  TextField1.rawValue = "Bob \n";

  break;

  Of course that's not work one name shows at a time. Help, please!

  Thank you

  Don't know what the code is supposed to do, but basically, you want to add the name of the drop-down list the addition on the current value of the TextField? Why not use the dropdownlist display value directly? For example on the change event:

  if ( TextField1.rawValue == null )
      TextField1.rawValue = xfa.event.newText;
  else
      TextField1.rawValue += ( "\n" + xfa.event.newText );
  

• Value selected in the drop-down list, the value border and subform border color

  OK, I'm busy to create a form that has a field drop-down list. There are five values inside the drop-down list. I have also four subforms which contain tables and fields for each option in the drop-down list except the first. Now, I want to put the border and the color of the border of the subform if you have selected the correct value.

  As part of the output, I created the code as follows:

  If (this.rawValue == '5') {}

  this.resolveNode("TextfieldName").presence = "visible"; This affects a visible text... works like a charm

  Optie1.UI.oneOfChild.border.color.value = "255,153,0"; After an example I found Niall

  Optie1.UI.oneOfChild.border.color.thickness = "0,0200" in

  }

  I've changed this in Optie1, is the name of the subform. Somehow it is not applied in the subform. I know I'm wrong, but can't find what I want on the forums. Someone at - it an idea on that?

  Well, managed to resolve myself to play around with the code.

  It should be:

  Optie1.border.edge.color.value and Optie1.border.edge.thickness.