Control flash that is loaded into flash

Similar Questions

• DB used space much more that I loaded into the DB

  Hello
  
  I use OBI and the default database that is created by the Setup program. Through the Warehouse Builder I loaded a total of 100 MB of data in the database, but
  the space used in the USERS tablespace shows more than 800 MB. The SYSTEM tablespace is not small either.
  Why are my big storage space? I use of total space to 2 GB? -C' is 20 times the size of the actual data that I loaded.
  
  [Print the screen size and storage spaces | http://www.metallon.org/test/space.png]
  
  I would be grateful for any ideas.

  If you insert into a table and then delete, remains the high-water mark.

  If a table is empty, you can truncate to reclaim space. If it is not empty you can reduce it.

  Alternatively, you can rebuild the big index to recover the space.

• How to control the video swf loaded in the loading component?

  I have an external swf file loaded into the loading component. The external swf loaded into the component loading stops at departure. I want to play by a button outside the loading component that is located in the main swf movie. CAN SOMEONE HELP ME CONTROL THE VIDEO SWF LOADED INTO THE COMPONENT OF LOADING EXTERNAL?

  You can target the SWF via the content property of the UILoader.  If the name of the instance the UILoader is ldr...

  MovieClip (ldr.content) .play ();

• Flash videos (youtube and vimeo, incorporate or not) do not play even if the controls indicate that playback is in progress.

  As YouTube and Vimeo 41.0 videos do not play even if the video controls show that reading is current. True to embed, Facebook and YouTube pages. On Youtube, video will buffer to 100% but will not play again. First frame of the video is visible at a time, but remains a fixed image. FlashBlock is installed but disabled.

  On YouTube, if you click on the pause button, and then click the play button, the video then play? (I have not checked on Vimeo yet.)

  If so, you can have the autoplay disabled HTML5 videos. From 41 of Firefox, it's more effective than in previous versions because reading is blocked, but there is the strange display of the pause key and the buffer file.

  To check this setting:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the media and make a pause so that the list is filtered

  (3) if the preference media.autoplay.enabled is in bold and 'game of the user' to false, you can double-click it to restore the default value true and see if that fixes it

• To access the elements of the scene, via a SWF file that is loaded inside the scene

  -J' I A.fla.

  -A.fla includes buttons, video clips and also B.swf is loaded in A.fla with a CHARGER

  -I want to access the elements in A.fla, from codes actionscript inside B.fla to change these video clips and buttons based on the actions going on in B.swf

  for example, lets say there is an X button in A.fla and there is a button there B.fla, B.swf is loaded into A.fla, and I want the key Y to delete X when you click the button.

  General question: to access the elements in a stage, via a file SWF loaded in this stage.

  This is a way silly to explain: there is this pregnant mom, a child is loaded inside him, now, I want the codes inside the child, access to MOM

  elements, such as lets say, I want the code of the child can make the eyes of MOM flashing faster. logically there is something inside something else, but I want to have access to the bigger picture of what is loaded. I hope I can get my point across.

  I repeat what I replied to your other psoting for this same question and adding just a little bit more...

  If you load a swf into another using the Loader class, then the charger itself is the parent of the loaded swf file, so MovieClip (parent.parent) could help you target the timeline that the charger was born.

  The way to have a loaded file to speak to a parent file is through the sending of events that the parent assigns headphones for after the file has been loaded.  Here is a link to an announcement that could help explain how to implement this.

  http://forums.Adobe.com/thread/470135?tstart=120

  And here's a quick example...

  Example:

  Add something to raise the event in the child:

  dispatchEvent (new Event ("eventTriggered"));

  In your SWF to loading/parent, listen for the complete event on the Loader.contentLoaderInfo.  In the complete event handler, add a listener for the event on the loaded swf file.

  triggered when external swf loading event handler
  function loaderCompleteHandler(event:Event) {}
  (event.currentTarget.content as MovieClip) .addEventListener ("eventTriggered", eventHandler);
  }

  function eventHandler(event:Event):void {}
  trace ("event sent in loaded swf");
  }

  So in your A.swf, you should have the other event and functions of event handler that would take care of control buttons.   Event listeners could be assigned to the B.swf after that that it has loaded.  In your B.swf you just have it dispatches an event and the A.swf manage self adjustments you need taken care of.  This allows the two files to be independent of each other on a functional level.

  Regarding the buttons that you want to disable, you can either use the removeEventListener() method to remove the listeners you have assigned, or you can set the mouseEnabled property to false, or you can set the visible property to false.

• Calling function flex SWF loaded into Flex

  Hi, just a few days in flex development and a question about SWFLoader.
  
  Is it possible to call a function from flex to a SWF file loaded by SWFLoader control?
  
  For example, I have a SWF animation with a button, loaded into a Flex application and I would like that when the user clicks the button, it will call a function in the flex application.
  
  If possible, can we send parameters with the function call?
  
  Thank you for all your help.
  Mika

  There are two possibilities, depending on what type of SWF you load. If you load a SWF9, then check on ApplicationDomain. If you load SWF8 or earlier, then read this technical note:
  http://www.Adobe.com/go/749eaa47

• using variables loaded into url

  I have a text file that I load a variable paths using:
  
  loadVariablesNum ('get_xml_path.lasso', 0, 'POST');
  
  A dynamic text on the stage with var field set to paths displays the variable: 90ZESJAN06
  
  However, when I try:
  
  var my_url = (' ' http://myurl.com/flash/ ' + paths + '.xml');
  trace (my_url);
  
  I get: http://myurl.com/flash/.xml
  
  What I am doing wrong?
  
  Thank you
  
  

  Thanks Phil... I was on the wrong track. I was not given a time limit for the variable to load before trying to use it. Now that the fixed, it works fine.

• two other programs to lose control of cursor when loading firefox. Nitro pdf & on display at take-off from the software Center. Help, please

  two other programs to lose control of cursor when loading firefox. Nitro pdf & on screen takeoff on center software. Help, please.

  When I use the programs listed above and firefox is loaded, scrolling through these programs takes me at the edge of the window. I can't scroll 3 lines I can when FF is not loaded. I hate to say it, but FF is certainly the culprit.

  OK, if I may ask, what also happened when Firefox is in Mode safe? That will do this troubleshooting step, is whether this is caused by an add on that you have in your profile. Questions to troubleshoot Firefox in Safe Mode

  Moreover, the fact happen on the touchpad, as well as with an external mouse (if it's a laptop, if not, please ignore)Reset Firefox preferences to troubleshoot and solve problems

  Does this happen with accelerated scrolling on? This setting is in preferences/Options > Advanced Options > general

  Please post back with your results, thank you!

• How many audio books can be loaded into iTunes 12?

  How many audio books can be loaded into iTunes 12?

  I don't have audio books, but all the time I've been here I don't remember someone mention a limit.  More your slowest library that is fine, but there are people with > 60 000 items in their libraries.

• How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

  How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

  Keep all the files on external hard drive image?  Nothing else and no pictures on the desktop?

  Keep all image files both places?

  What is the best way to go through thousands of images in the Organizer to identify and place them in files?

  Once I've placed a file, I just leave it in the entire catalog or a way indicate to me that it has been sorted?

  As overwhelming, any tips/shortcuts/schemes, you can offer are welcome!

  As I only have the version of the EP, here is some info on the organiser:

  https://helpx.Adobe.com/Photoshop-elements/how-to/use-elements-Organizer.html

  Independent of how this feature works, you want to have your photos in one place and have a backup (second copy) somewhere else. All hard drives will not be successful at some point - some more early, some late - never trust to have your files in any safety devices if they are on a single disc. Once you have your sorted, it would be useful that you will organize/name/tag new photos immediately if the task is relatively short and simple. I copy my photos on my internal hard drive for my camera, take a quick look with preview to see who needs some changes and then decide where to put them - either drop them immediately after naming them or bring in an editing application and then file them away.

• Is it possible to get a list of the refnums all ActiveX objects loaded into memory?

  Specifically, I want to programmtically save and close an open excel workbook which has not yet been registered and I don't know the name of. LabVIEW.

  I know how to manipulate the workbooks I open from a saved location, but don't know how to take any workbook is open on my computer and save it to a known location.

  Thank you!

  I saw this post and thought it might be a similar method for ActiveX objects to vi:

  http://forums.NI.com/T5/LabVIEW/is-it-possible-to-get-a-list-of-refnums-to-all-vis-loaded-into/TD-p/...

  DaveRines wrote:

  Specifically, I want to programmtically save and close an open excel workbook which has not yet been registered and I don't know the name of. LabVIEW.

  I know how to manipulate the workbooks I open from a saved location, but don't know how to take any workbook is open on my computer and save it to a known location.

  Thank you!

  I saw this post and thought it might be a similar method for ActiveX objects to vi:

  http://forums.NI.com/T5/LabVIEW/is-it-possible-to-get-a-list-of-refnums-to-all-vis-loaded-into/TD-p/...

  This should work:

  

  If you want to change the path or to have more control over the options, you can replace '_Workbook/Save' method with

  

  In this case, if you want to avoid pop-ups, make the 'Visible' and 'DisplayAlerts' FALSE properties when you open the Application in the first node of ActiveX

• Problem with control could not be loaded

  When I try to run this program, this figure shows the control could not be loaded. After the installation of NI LabVIEW Run-Time Engine, the problem is still there.

  I'm trying to find a solution.  Any help would be greatly appreciated.

  

  The LabVIEW runtime engine is not for that. Looks like you're missing the OL - 770 activeX controls.

• cannot access windows in safe mode because the keyboard is disabled until windows is loaded into the system

  I installed a keyboard wrong driver and now my winxp support with virtually no feature mouse or the keyboard, both frozen. I can't even load windows in SafeMode to solve my problem of driver, because my keyboard lights up until windows is completely loaded into the system. And it was actually a plu problem that I don't take care off the coast in time... Now, I was struck with a bigger question. Any suggestions from anyone, I appreciate it, thanks.

  I have windows xp pro sp3

  Can enter you the BIOS setup? I remember that my system has recognized a key led even with disabled USB legacy support. Then you can activate the support legacy USB in the BIOS. In time, you have to press F8 for safe mode there is normally no active driver at all, everything is managed by the BIOS. Another possible solution would be using a PS/2 keyboard...

• computer/control panel does not load in windows 7

  Hello

  I had this problem and have sought for a while again, unsuccessfully, trying to open the computer, it's green bar slowing down the loading, but once completed no content will show in the computer at the same time control panel does not load.  This problem will not occur all the time. and if I close the window and reopen it. He came back to normal, did a sfc according to other threads have disabled the network discovery.  past again, Please HELP?

  CONCERNING
  LEE

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  also:

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  If the problem persists, I suggest that you scan your computer for malicious programs:

  There are some that will hide your files/folders so that you don't normally see them. I strongly suggest to run a scan on your computer with your antivirus/antimalware software. If you need to, you can also use the Microsoft Safety Scanner, it's free:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also, if your files are hidden, check out the following article on how to display the:

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

• fonts of PDF in Acrobat Reader MS are coarse, while the same document loaded into Acrobat Pro on the same computer has smooth fonts. How to fix the appearance of fonts in MS Reader? Running Windows 7.

  fonts of PDF in Acrobat Reader MS are coarse, while the same document loaded into Acrobat Pro on the same computer has smooth fonts. How to fix the appearance of fonts to Rader DC? Running Windows 7.

  Hi sidneys22641895,

  Please try to check the rendering under Edit menu options > Preferences > Page Display.

  Check if in smooth text field "for computer/laptop LCD screens" is selected.

  Let us know if that helps.

  Kind regards

  Meenakshi