Controlling the corrective Actions of Cloud Control 12 c

Similar Questions

• Corrective Action of quality application form: Group cell get error

  Hi all

  Get the error: "'Group cell get error FRM-41084 ' on access to the Corrective action request form enter."

  

  Request to provide the resolution.

  Kind regards

  Abhishek

  Hi Srini,

  Thanks for the reply... the problem has been resolved by following the steps described in the Doc ID 382900.1

  Kind regards

  Abhishek

• Corrective action - script using RMAN catalog?

  Hi all
  
  for ways to avoid an archiver stuck, I implemented a FRA_USAGE metric and corrective action for this measure which runs a RMAN script, back up and delete the archived logs. This so far works fine.
  However, what I would really like to do is to connect to our catalogue and then back up the archive logs - is it at all possible and if so, how?
  
  Thanks for your comments.

  Step 1 Add the recovery catalog to GC. See http://diandiandiandididi.blogbus.com/logs/62862298.html (stop at the point "Use Recovery Catalog")
  Step 2 for each db for which you want to use tracking the catalog to retrieve the in the mentioned link step "Using Recovery Catalog" to stop at the "backup." planned to specify
  Step 3 (sorry, now I have to do in the lead) create action: installation, library of Corrective Action if I remember correctly, you can create a RMAN job just the way you want it to be.
  Step 4 change your UDM (FRA_USAGE) so that the corrective action will be run step 3 created new RMAN script.

  Now, you can also create and schedule backups RMAN (using the RC) without using the operating system script.

  Eric

• error: there is no associated messaging program to perform the requested action. Install an e-mail program or, if such is already installed, create an association in the default programs control panel

  Installed Windows7 Enterprise (evaluation) 32 bits have a database custom (32 bit) when I press the close button, an e-mail icon in the taskbar - nothing happens with the program except the screen turns off, when you press the email icon it is an error message - there is no associated messaging program to perform the requested action. Install an e-mail program or, if such is already installed, create an association in the default programs control panel

  There is no email function associated with the close button

  using the close button of other windows in the work of database correctly.

  TBird is installed and works well

  Have solved the problem - the app was looking for a MAPI - outlook installed e-mail client and not more errors. Thank you much for the help

• Control the output is not the correct value

  Hello

  I have a producer consumer with a queue architecture to pass values. I want to push a new value in the table by using "Insert table" when a button is pressed, but when I do the previous value is read the first time and the correct value on the second press.

  I am self-taught and this is my first time using the queue so maybe something I'm not seeing/thinking about here?

  Version 8 attached VI.

  To see the problem, follow these steps:

  1. run
  2. click on "master reading.
  3. change the 'value '.
  4. click on "master reading.
  5. click on "master reading.

  Any help is appreciated especially block critical diagram.

  Thank you!

  It all depends on how you change the value of 'value. ' If you use the increment and decrement buttons it works as expected.

  If however, you type a new value and click the button without clicking elsewhere first, it does not - and here's why:

  When you type a modified value value does not appear in the code until the control loses "touch focus". The problem is that clicking the button causes the digital input to lose key focus, but only after the code responded to the mouse event.

  To solve the problem put a property node in the supported mouse event to set the property KeyFocus the digital to false until the value is queued.

  Mike...

• What is the difference between EM cloud control vs what MS Ops center

  Hello community,

  What is the difference between EM cloud control vs what MS Ops center

  I was looking for this and did not get the right answer

  Kind regards

  Ben

  Hi Ben,

  You can find the oracle's response in this thread of the community: https://community.oracle.com/message/12025608#12025608

  Concerning

  Borys

• Select multiple choice based on the data control does not not value in the correct form

  Hello, I am using JDeveloper 12.1.2

  I made a choice of several select based on an attribute of the year to a data control and I have a method in my managed bean that retrieves the selected values in the select choice of many, and on the basis that I want to do some queries, but the value that returns the selection is not the value of the attribute is the value of memory (or what is the correct value name..)

  Here is the code:

  < af:selectManyChoice value = "#{bindings." Label AnoList1.inputValue}' = 'Ano '.

  ID = "smc1.

  valueChangeListener = "#{OBIEE_managed_bean.» AnoListSelection}.

  autoSubmit = 'true '.

  Binding = "#{OBIEE_managed_bean.anoListBinding} '"

  immediate = "true" >

  < f: selectItems value = "#{bindings." AnoList1.items}"id ="si1"/ >

  < f: validator binding = "#{bindings." AnoList1.validator} "/ >"

  < / af:selectManyChoice >

  Managed bean:

  public void AnoListSelection (ValueChangeEvent valueChangeEvent) {}

  valueChangeEvent.getComponent () .processUpdates (FacesContext.getCurrentInstance ());

  try {}

  System.out.println ("Valor link yearChoice:" + anoListBinding.getValue () m:System.NET.SocketAddress.ToString ());

  ...

  The output is as follows:

  Valor link yearChoice: [Ljava.lang.Object;@4939cade

  Year: Ljava.lang.Object;@7135da60

  This normally happens when the toString is not defined, but how I have to fix this? Someone at - it had the same problem? Any advice?

  Kind regards

  Frederico.

  Hi Frederico

  I'm fine hope you are too.

  Sorry, but you can try

  {for (Object item: (Object []) {valueChangeEvent.getNewValue ())}

  System.out.println (Item.ToString ());

  }

  This should give you something.

• Dynamic tab Interface User Shell - close the tab action &amp; number of open tabs control

  Hello
  I browsed the forum, but could not get their hands on a concrete solution to the issue on how to capture the event action to close the tab and perform an action on this?
  The thread below about my question, but doesn't seem to have a good solution
  Re: Dynamic tab Interface User Shell: control icon close
  
  And another question, currently in the TabContext the number of open tabs is at the limit of 15. How can I replace only such that I do not allow more than 7 tabs open at the same time?
  
  Please help me with the two queries above. Thank you!
  
  Kind regards
  SS

  Sorry for the delay so much. Finally got some time to play with the model and by downloading the source code for dynamicTabTemplate and substituting the closeIcon worked like a charm.
  Let me summarize what I did to help someone who is looking for it :)
  (1) download the source code for dynamicTabTemplate
  (2) added and additional attribute to the model closeTab
  ++
  +closeTab+.
  +java.lang.String+.
  ++
  true
  ++
  ++
  (2) the dynamicTabShell.jspx edition, closeIcon commanlink actionListener to be linked to the "#{viewScope.tabContext.closeIcon}".
  (3) implemented the method of closeIcon in TabContext
  +@Override+
  + ' public void closeIcon (ActionEvent actionEvent) {+
  CloseIconInterface bean = getBean().
  bean.closeIcon (actionEvent);
  +}+
  (4) generated the jar.
  (5) delete the oracle supplied jar dynamicTabTemplate by default and instead added my custom pot generated on demand
  (6) implementing the new model
  (7) set all attributes with attribute closeTab. It would take the name of BackingBean... example:
  (8) xxxBean done to implement CloseTabInterface
  (9) implementation of the method closeIcon with custom code to confirm the page close prior to removal of the tab.

  However as you say, I will keep tab on the future updates of the default model tab updates fail bug fixes or improvements.

  Thanks to all those who have looked into this for me and I hope this helps someone else :)... Good luck!

• I get that for Windows Server 2003 is no longer supported the KBs on these issues do not have a correction action.

  I get that for Windows Server 2003 is no longer supported the KBs on these issues do not have a correction action. My network is disconnected, so the automatic update is not an option but I always receive as a vulnerability on the scans. How can I obtain the latest CRL to mitigate these vulnerabilities.

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you re-post your query on The TechNet Forums because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• The Action Service Cloud app - How to let contacts continue to the next step?

  I created an application of cloud eloqua with service of the action.

  To test this, I created a campaign of several stage which is really simple:

  A segment with a couple of members empties in my cloud service for action, which then flows into something else as an email or something.

  However, I have difficulties to get the contacts to flow through the cloud service action step: they seem to all be stuck there and do not pursue.

  According to the documentation of the api 2.0 in bulk and sites on the provision of a service of the action (develop a Service of Action AppCloud).

  during contacts lead to the step of the service action, eloqua will ask my notification url (I myself do it successfully),.

  After that, I respond with a status code, and the example is a code of 204 followed State of an asynchronous data import/export in bulk.

  My action requires no import or export, and my goal is to do my job and to answer back that I have completed, or if it will take a while: answer in return have eloqua wait, then send a request later that I finished.

  After that, contacts can move to the next step in the Web of the campaign.

  Then, I realize that after I get the notification I can respond with a status of 204 to eloqua let know that I will use the large asynchronous calls in the api to import and export data.

  But what other statutes can I use if I don't want or don't need to use asynchronous api calls?

  Can I just return a 200 status if I'm done and I want eloqua to move to the next step of the campaign?

  Can I return a status for eloqua wait for me to proceed with a treatment on my side, followed by a status to let eloqua proceed?

  I tried several different status level 200, and none of them does not seem to leave my contacts to move to the next step.

  Help, please.

  Thank you

  Chris

  No, you will need to update their status with an import. You can simply use your answer.

  What you're talking about requires you to answer in performing an action to import BULK "SetStatus" with a status of 'Complete '.

  See:

  Develop a Service of Action AppCloud

  I do in fact for the first time me just at this moment. It is not difficult, but I am struggling with the ML to give it a Destination which is like.

  Scott

• I have a copy of CS5 that is bought and paid for, has been installed and works, until I started using the creative cloud. Now it is considered as a trial, and when I enter the correct serial number it says it is invalid.

  I have a copy of CS5 that is bought and paid for, has been installed and works, until I started using the creative cloud. Now it is considered as a trial, and when I enter the correct serial number it says it is invalid.

  Cloud of reading resumes https://forums.adobe.com/thread/2089127 for ideas (see answer #1).

• I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some

  I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some people I've seen so angry about it here by searching for the answer myself.

  Thanks for sharing this, yes turning Firewall works.

  Concerning

  Stéphane

• I think I bought the wrong to adobe. I was hoping to edit PDFS and make arrangements for the signature and I get to do it with my current plan. Can I ask to sign up for the correct adobe?  I don't know what the creative cloud is all about

  I think I bought the wrong to adobe. I was hoping to edit PDFS and make arrangements for the signature and I get to do it with my current plan. Can I ask to sign up for the correct adobe?  I don't know what the creative cloud is all about

  Look at desktop applications Adobe Creative Cloud | Adobe Creative Cloud to see what is in the cloud and click on the names to find out what each

  Acrobat is what you use to create and edit a PDF file

  If that's all you want to do, you cancel your current subscription and then buy the correct subscription

  This is an open forum, not Adobe support... below to connect with Adobe personnel to help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Redeemed software Creative cloud on the wrong account Adobe and it has no effect. How can I transfer the license to the correct account renewal?

  I bought a renewal of the licence for software student discount Creative Cloud. To get an upgrade my code I confused between e-mail addresses and created a new account of Adobe instead of logging in my current one. I used the redemption code for renewal of license on the newly created account (the fake account). Now he had no effect and I can't reuse the code of redemption for the appropriate account. How can I change the renewal of the license for the correct Adobe account?

  Contact adobe support by clicking on this link then "still need help" as soon as it appears, https://helpx.adobe.com/contact.html

• In Acrobat Reader ms for Android, how to stop we Verizon cloud to launch when you click on the floating action button to recover the files?

  I have a Verizon Samsung S5 Galaxy brand, which means many Verizon apps have been added since the installation of the plant.

  Recently I have updated Adobe Acrobat Reader to the latest version.
  When I clicked on the floating action button to open a PDF file, it launched Verizon cloud rather than show my directory of files.

  Unless I disabled it Verizon Cloud altogether, whenever I did, I would get the app from Verizon cloud instead of a list of files.

  CD player is the only application that did such a thing. Is it a defect?

  Thanks for the information.

  To remove the application Adobe Acrobat DC Verizon cloud storage, you can "turn off" the application of cloud of Verizon 'Settings'--> 'Application Manager'--> 'applications '. After that, whenever you press the floating Action button, you will get a list of all your pdf files on your device.

  If you want to see both the Verizon cloud based files as well as files of your internal/SD memory card, I ask allows you to download an application from file manager to game Google for example and explore, shop ES File Explorer etc. After that, whenever you rely on the floating action button, you will receive an option to open the files either from the cloud of Verizon or the files on your device.

  I hope this helps. Please let us know if you observe problems more.

  Thank you.