Select multiple choice based on the data control does not not value in the correct form

Similar Questions

• Data control does not display THAT POJO returned by the method

  Hello

  I am running JDev 11.1.1.7. In my AppModule.impl, I created a method that returns a simple POJO (which implements serializable) that has two fields of type string. I exposed the method in the client interface of appmodule. In the control of data, the method appears with an element of return instead of an object or any way to access the two fields of type string. I want to display two fields of type string in the output text components on my jspx page. I'm not find documentation on how to do it. Can someone point me to the documentation or tell me how to make this change to the method of control of the return data?

  Thanks in advance,

  Steve

  AM method can return the custom type, but as much as I know there is no support for introspection of object at design time.

  (so you can call it programmatically and cast to the appropriate type, but you can do component DND data control).

  So, option 1 is to bind the value property of your outputText managed bean fields, programmatically calling AM, fill these properties manually and update your user interface components (note that managed bean must be saved in viewScope or more in order to preserve the values)

  Option 2 is to create the Bean DataControl (with this you will have DND support)

  Dario

• Selection of Inspection based on the attributes of the image

  I'm processing the stored images and must choose an inspection based on attributes of the image as the name and the size (length in pixels).

  Currently, I do all this in only one inspection, but since I'm inspecting several product families (differentiated my name of the image), and several sizes for each family, my inspection algorithm becomes very difficult to manage, so I would like to create a supervisor application that can determine which family of products and the size I'm looking, and then run the corresponding inspection and then do some data sharing and saving the image and loop back to the next image.

  I played with the ability to select Inspection in VBAI, but since I'm not on the material or communications to select the inspection, I can't seem to find a viable solution, ideally, I would like to go through the step of configuration once, then jump to the state diagram for the treatment of the initial image (determine the product family and size) then go to 'Select Inspection' and run the corresponding inspection.  This is where I'm stuck, IE., how to trigger the jump to select inspection in the state diagram?  Some people I have consulted so far say: you can't do that!  Anyone beg to differ?

  If I can't access select Inspection of state diagram, then plan B is to use the LabView API and make the principal contractor in LabView, it is where I need to go?

  Thank you

  Eric

  If you have the indicator Activate Product select enabled, select product State will run automatically after the State inspect goes to terminal completion. You can use a VI select LabVIEW Run in the State of product for your logic and move to the next round to load. With Vision Builder AI 2010, this path can be considered to be the real path to the inspection (inspection select dynamically run then) so you do not preconfigure a lookup table of inspections to run with values (it was the previous way of doing and it does not allow to dynamically load new inspections that weren't in the preconfigured table). Don't know how it works with your system, but using the LabVIEW API is an alternative that would give you better control and. You might even have a stage run a LV VI specify the control to use on an iteration in Prioduct selection state and inspection of logging of data/images to use later, but due to the opening and closing of the inspections overload new inspections may make having an inspection separate for logging of common data/images does not not your needs timing.

  Hope this helps,

  Brad

• Why do write can not be performed because the number of data channels does not match number of channels in the task.

  Possible reasons:

  Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

  Number of job channels: 8
  Number of data channels: 1

  Lama says:

  The DAQmx vi writing gives me the error. If I run a single channel, isn't a problem. Multichannel gives me error.

  You are funny! Why tie yourself to work VI (single channel) instead of one that gives you errors (multichannel)?

  (If your car does not work, you bring car your wives to the mechanic, right!)

  What is the exact text in the multichannel 'physical channels' when you do the AO control?

  Lama says:

  I did a sequence to ensure that each function has been run in the correct order. Wouldn't a race condition.

  All you have to do is wire the 'start of task' error at the entrance of error of the DAQ assistant and then back to 'stop task' and things will run in order. Guaranteed! Think the stream! Everything else can run in parallel or the order is irrelevant.

  First convert the sequence stacked to a sequence of plate, remove the flat sequence and add the mentioned son. Now, do a "cleaning pattern.

  A when stacked with the inhabitants of the sequence is one of the worst construction you can possibly do. It makes the code difficult to follow, impossible to maintain, difficult to debug.

• IR remote control does not work with the new imac

  IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"

  Correct, because Apple no longer includes the IR sensor in newer models

• My speakers stopped working suddenly. the message I get is good card can be used, but the volume control does not appear and when I go into sounds and devices, everything is gray.

  My speakers suddenly stopped working. I went to audio and I received a message sound card may be in use. The volume control does not appear atr from the bottom of the screen and when I go into properties, everything is gray.

  Hi BarbaraEvanchik,

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  For reference: no sound in Windows

• the windows boot configuration data file does not contain a valid entry os

  Hello

  I got this message when recovery... I can't get the windows... I have the CD recovery, but when I boot it... It gives me this message

  the windows boot configuration data file does not contain a valid entry os

   

  
  How do I solve this problem

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( it must be the same version that originally shipped with your laptop - IE if your laptop comes with Windows 7 Home Premium, that is the file you need to download ) from the link below and use an app like ImgBurn to burn the ISO correctly file on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is - Digital River.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software you may need are located by entering your full model number or Nr here.

  Kind regards

  DP - K

• Parental controls does not: Impossible to make changes to parental controls settings. If the problem persists, see your system administrator.

  Original title: Parental control does not

  Try to set up Parental controls for my son's account. I have an account manager, go to control panel / user accounts / parental control - click on windows expects to obtain two error message with the same message: "unable to make changes to parental controls settings. If the problem persists, see your system administrator. "I'm a sysadmin, so what's the problem?

  On a side note, I have two children on this computer. Had to remove my son because he downloaded a virus. So before the two children had parental control. But when we were going to change their times permit, he would give this error message but weather changes would take place. Now that I am setting up a new account for him, can't get parental controls to work.

  Hello

  Step 1: turn off UAC (User Account Control) and check the result

  See how can I change the behavior of user account control by using the slider? :http://windows.microsoft.com/en-US/windows7/How-do-I-change-the-behavior-of-User-Account-Control-by-using-the-slider

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

  Step 2: I suggest to create a new administrator account and log later in the new administrator account, try to set parental controls and check if it works.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Check out the link below to check if the parental control is correctly defined

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• LR CC control does not

  control does not. All I get is a red tint. Suggestions please. Everything is updated recently.

  Hi DMTollefsrud,

  Greetings.

  • What version of LR you use.
  • Make sure that when you use the adjustment brush "See the selected mask overlay" is unchecked.

  

  Concerning

  Rohit

• HP 15-500LA OMEN: HP OMEN LIGTH CONTROL DOES NOT WORK

  Hello

  I just got a 15 HP on August 22 and omen control does not change the diodes.  The first thing I did is you update Windows 8 Windows 10. OS is in Spanish

  Control of omen for change the light does not work.

  Can sombody help me to make it work? I'd appreciate help amny

  Thank you so much IMaxx

  I've updated the utility HP System Event and after the reset of the system, it works now

  Thank you once again

• Satellite X 200 - after upgrading Vista remote control does not work

  Hello

  I have upgrated my Vista Home Premium to Vista Ultimate and the remote control does not work. Well upgraded... I bought Vista ultimate and it installed.

  Is there a driver for my remote?

  You may need to install the infrared driver.
  This driver is required to activate the infrared port on your laptop.

  You can find it here in the X 200 section
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Re: Satellite L500 iCQ, as Volume Rotary control does not work

  Front volume control does not work. Volume is set to maximum and can only be controlled by the mouse and the slider control.
  Can anyone help?

  To be honest I don't think that anyone will be able to help you with this.
  As far as I know that's not used such mechanical volume on older models of computers laptops, but electronically part controlled by software, so the only thing you can do is to test the functionality with the settings and see if the problem will be the same.

  What else can you do? I do not know. Maybe update the BIOS, but I do not think that this will help you.

  Do you use pre-installed OS original you got with your laptop?
  Have you made some changes or anything that can have a negative influence in this?
  Since when you noticed this strange behavior?

• Satellite P100 remote control does not work

  Hello

  Guys, I bought a toshiba satellite p100 and the remote with it does not work...

  no idea why? the battery must be fully charged... but when I press the buttons of the led on the remote control does not work or the other...

  Help, please...

  Thank you...

  Post edited by: qazam

  Hi Qazam

  How did you test the remote control?
  What do you mean who does not? Some functions does not work or a complete remote control cannot be used?

  I read the user manual and it seems that the remote will work under Windows mode with WinDVD or Express Media player, and Windows Media Player when the laptop was not started in the Windows operating system.

• "parental controls does not allow this game begins" without any restrictions applied

  I get the window ' parental control does not this game start "when I try to run a game and all settings are disabled.

  Hello helicopter-Guy,.

  Welcome to the Microsoft answers site.

  I would like to ask you a few questions in order to get a better understanding of this issue.

  ·         What is the operating system installed on your computer?

  ·         Did you the latest changes on the computer?

  ·         Logged in as the administrator of the computer?

  ·         What game you try play?

  You get this error usually when parental control is set by the administrator for your user account.

  I suggest that you try to run the game as administrator and check, if you are able to play the game.

  Right-click on the game, click Run as administrator.

  If the problem persists, then I suggest that you install the game in Vista compatibility mode and check if you are able to play the game.

  See the link to run programs in compatibility mode: make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-us/windows-vista/Make-older-programs-run-in-this-version-of-Windows

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

  My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

  Original title: control sign Vaio

  Hello

  According to my research, the actions must be enabled for individual applications. Check out the following link and activate the gesture for Power Point and Cyberlink PDVD.

  https://us.en.kb.sony.com/app/answers/detail/a_id/36487/~/how-to-configure-vaio-gesture-control-settings.

  For more help, you can contact Sony support.

  https://community.Sony.com/?XID=M:kb_header:eSupport

  Hope that the information provided is useful. Do not respond if you need more help.