Conversion of multiple files

Similar Questions

• What is the best way to adjust the brightness in multiple files using elements 13?

  I have about 100 JPEGs that I need to cheer up.  I need to adjust the brightness in "100" on each; is there a quick way?  "Treat multiple files" does not...

  Thank you!

  john_oc wrote:

  I have about 100 JPEGs that I need to cheer up.  I need to adjust the brightness in "100" on each; is there a quick way?  "Treat multiple files" does not...

  Thank you!

  Simple and powerful: use the ACR (Camera raw).

  Depending on the power and the amount of RAM on your computer, you can now open and edit multiple files at the same time in the ACR module.
  Use the menu file/open in camera raw.

  Select a batch of files (say 20 to begin by)

  Select all the files in the camera roll on the left.

  When they are highlighted, you will notice that the ACR module shows its AutoCorrect settings. Generally the brightness of your images will already be improved.

  The changes you apply to the sliders will change all the images highlighted.

  Take advantage of the opportunity to refine all the other sliders made highlights/shadows, clarity, vibrance, sharpening or noise reduction...

  Tip:

  What you do in the ACR module do not alter the original jpeg pixels. Only the parameters are saved, which is called parametric edition. So after this editing session, when you save the changes ('Done' button), you are able to reopen the jpeg (it will open automatically in ACR, even from the Organizer). You will be able to start editing with either:

  1 - the values of the original jpeg (turn all the sliders to zero, auto or custom in the right panel).

  2 - the AutoCorrect default CAB
  3 - your latest changes (settings file)
  4 - the session settings of most recent edition (which is useful to apply to several image consecutively).

  These settings are saved in the jpeg metadata section. No need to create a version set at this stage.

  Important: even if you are happy with the automatic settings default to ACR, apply a little change of your choice so that the settings are saved in the metadata section when you click on 'Done '.

  You have now edited your first batch. If you use the orgnizer, you might want to "update thumbnails', which show the improvement of brightness in thumbnails. You are ready to make the necessary changes to individual files, such as cropping or sharpening in ACR. Instead of clicking "Done", you can click on 'Open' to open the file in the Editor (you can change in 8 or 16-bit). You must go into the editor to apply other changes as layers, local adjustments. you use the editor to register in any other format file or print.

  For the next batch, the mounting parameters are available in the dropdown to the right (previous conversion). Open files, highlight all, select previous conversion, click 'Done '. Wait for the settings to be saved in jpeg files.

  In a situation where you have 100 files JPEG, the workflow that the above is by far the fastest and most flexible you can use. Imagine you have a white balance bad setting of your camera, you can imagine the time you need by editing individual files in the editor?

• Saving multiple files in RTF

  Does anyone know how to save multiple files in a book in RTF format, another that save each individually? I tried to save to pdf and conversion of her, but the formatting are never good.

  I use FM 9 on Windows 7.

  Thank you in advance.

  Stu

  MIF2Go is the ultimate in terms of flexibility, you can out your files either chapter level, or even (if I remember correctly) at lower levels (for example title 1). There may be a bit of a learning curve, but it is the best out there for tweaking the output exactly as you want, both for the RTF and HTML or others help the output file.

• setting up multiple files for storage on the sidebar in mail

  How can I configure multiple files storage on the sidebar in mail

  Mail/Mailbox/new mailbox. Generally better to create the mailbox on my Mac when it is used for storage.

• Rename and change the date of the file on multiple files

  How to rename multiple files in pictures in a single operation like I did in iPhoto? The same question arises to change the filedate?

  I looked in the manual very rudimentary, and it seems to have disappeared. I think that pictures is a gradient iPhoto (I don't want to use a program with no future updates) and I'm not happy to trust pictures/iPhoto to archive all 18100 photos and videos in a single file which from time to time a photo or two disappears (will not help to repair the database file)

  I started using Adobe elements 14 Organizer to keep track of my files in a folder of my choice where my photos is located a file for each photo a week (feel safe) and Adobe Photoshop elements 14 to change files. He has a solution for my answers mentioned here, I have not found better (I tried AcdSee pro for mac but it is pretty unstable and limited in options)

  Come on Apple we give a new Photos with option not reinforced this low quality low option software

  You can't and you couldn't have in iPhoto, either - no change is possible for file names or file dates in a program

  Given that you want to not use pictures you have made the right choice - do not use in it, use a software you like - the software you use is your choice and you can change at will - but it is crazy to expect that Apple or someone else will change the software used and loved by millions just to meet your personal wishes

  And clearly, you have no idea how works same Photos - but because you don't like it don't is really no reason for you or for someone to try to explain it to you - just for a simple example - Photos put everything into one large file - it stores each photo in its own file using the same exact file used by each program Amc system including organizing Adobe

  You have made the right choice for you to use and enjoy - don't know why you even bother to post here

  LN

• Is it possible to attach multiple files to a contact in the address book?

  I stopped using WinPIM for our small business when I paid for the sync option and it has stopped working. Because the devs don't understand much English, I could never solve this problem. I discovered on Thunderbird and go to calendar/address book/email program.

  The only thing missing to make it a PIM for business, it's that you should be able to attach multiple files to a contact. Currently, I am using the photo upload to join estimate/job a customer. But if the customer calls for additional work or in the case of entrepreneurs, we must be able to set each worksheet in contact with the contractor.

  A way to do this?

  UPDATE: I think I found a way to do it. I can reach the estimate for the event file created for the appointment. However, I have a problem because the Windows Photo Viewer is not an .exe file and Thunderbird allows you to choose an application program to associate to open the attachment. I tried to find Windows Media Center, but it does not under Program Files or Program Files x 86, even though I know that it is installed on my Windows 7 laptop, as it appears as an option for default programs for images.

  I'd appreciate any help I can find a way to open these without having to use Adobe Photoshop (my only other option).

  Picassa is a program to look at a picture. So yes, I have ideas, the install if you have something to select.

• OfficeJet Pro 8500 a A910a - cannot save pdf in multiple files via touch screen

  Hello world
  
  My problem is that I can't save my scans in multiple files (.pdf) If you use the "scan to file function" via the touch screen on my Officejet Pro 8500 A910a a shortcut. It works when scaning manually from the computer, but I need to work from the printer/scanner.
  
  The only way that the scan shortcut saves each page separately (works the way I need) is when you save as a .jpg file, but this isn't the exit, I need. I search for an .xml file change the shortcuts manually, but have not found one. Since my other printer 8500 A909a can analyze each page in a single .pdf file, it must be a question of settings that the A910a does not offer this parameter directly.
  
  I appreciate any assistance with this problem.

  OS: Windows 7 Home Premium 64-bit

  Driver: OJ8500_A910_1315

  Firmware: OJP8500_A910a_1231A

  Hi RnRMusicMan,
  
  the solution you are suggesting is what I have now and the reason why I even started this thread. Analysis each page separately from the touch screen is a pain in the a * and analysis of PC via a scan profile is not the way to go for me either. Thank you in any case, it seems like it is actually a problem in the software and I have to be careful next time, choose a new printer.

  RnRMusicMan wrote:
  

  Hi Koumack,

  Welcome to the HP Forums!

  I see that you are trying to save your scans in multiple files (.pdf) using the analysis of the function of file.

  That's what I could find in my resources:

  How to perform a scan: from the control panel

  Breast of HP Scan, select scan on a daily basis, and then click Advanced settings, select the file tab and check create a separate file for each scanned page. Click OK. It should work from the software.

  

  Otherwise, even if it may be a longer process, as a work around the printer, you can scan a page using the scanner glass.

  Hope this helps and have a nice day.

• I want to handle unique table for multiple files

  In the previous post... I have my doubts to playback of multiple files... I got has done that with your help...

  I have the storage to the table... in I want to store all the data or a group of file data...

  If I run the VI. data that present in the last executed file will be stored in the table... I want to go forward... so I want everything to go further

  

  Move and connect the 'empty array constant' connected to the shift register to inside of the loop on the outside for the shift of the loop register.

  Published: photo for illustration.

  

• Open/create and write to multiple files

  I'm doing data acquisition high speed and save data in the file.  I will acquire a large amount of data, so save in one file would result in my file to jump in size.  This is why I would like to save my data in several files.  I'm trying to figure out how to open several files, then choose which of the file to write to.  My approach is to open/create multiple files and save their refnum into an array.  Then I would choose what file to write from this array.  I enclose my VI, everything I have so far.  It seems to me to get errors, the "Double-track" or "input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @. "How could start with this problem?

  Figured it out...

  Sorry for the inconvenience!

• How read datalog multiple files at the same time?

  Hello friends...

  can someone help me to show how read datalog multiple files at the same time?

  Here is the example of my case.

  I have 500 files in a folder. each file contains a waveform and its setting.

  and then I want to do a card spectral these files, because these files have been saved in the order.

  the point is to know how to read these 500 files at once? I made a program to read these files, but the program can read these files in one by one. So it is very uncomfortable to read 500 files one by one. can someone help me solve this problem? Thank you. I hope you can show me the program. Thank you again...

  Hi jojo,

  Well, in the range of functions daughter, you will find a function to list the contents of the folder. This allows to get the names of all the files datalog, and then use a loop FOR to read.

  No one is obliged to provide 500 names of files manually - that's why we use a programming language to let the computer do the stupid work

• How to rename multiple files with the extension in windows xp

  How to rename multiple files with extension in windows XP.

  1. If you want to simply rename the extension, open a run window (Windows Logo key + R), type cmd and press ENTER. Using the CD (Change Directory) command, navigate to the folder in question. Now, type ren *.mp3, *.mp4, and press enter (note the two spaces in the command). Note, rename mp3 MP4 is just an example of the command.

  2. If you want to rename files, download the 32-bit version or 64-bit Bulk Rename, here http://www.bulkrenameutility.co.uk/Main_Intro.php

• How can I print multiple files 'no MS Office suite' at the same time?

  I try to print multiple files .print simultaneously.  They really are .txt files, but the extension must be .print of certain processes downstream to our factory.  I tried highlighting them all and then right click, but there is no available printing options.  Is there a way to batch print multiple files at the same time?  It would be nice if the print dialog box would open and can be changed for printing at the beginning of this process and keep the same settings for each selected file.  Is it possible to write a macro or vbs code?

  Hi bdaely,

  What application you use to print multiple files sometimes?

  What is the number and model of the printer?

  We will be able to print multiple Word document files.

  You may need to communicate with the application through which you print. If they have suggestions on changing the configuration of the file to print multiple files.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to rename multiple files in Windows Explorer with numbers that I choose?

  I have Windows Vista Ultimate, when I try to rename several .jpg files, it won't let me choose my starting number.  It is automatically defaulted to 1.

  Hello

  You cannot rename multiple files at once by the design of the operating system. However, try this at your own risk:

  http://www.chosensoft.com/batch-file-rename/index.htm

  All the best!

• Move multiple files from one folder to another in SkyDrive?

  How can I move multiple files from one folder to another in SkyDrive?  When I click on a file, & then use CTRL-click on another file, it moves to that one.  Can I select multiple files & copy or move or rename on PC?

  For now - not.  SkyDrive Wave5 or anyone should have this ability when it is fully released.

  http://www.LiveSide.NET/2011/09/06/SkyDrive-wave-5-to-finally-support-multiple-files-selection/

  (Read and also read comments on things, you might be able to use now to accomplish what you want).

• Change multiple file permissions?

  I updated from XP PC to a laptop running Windows 7. I'm trying to transfer files from my XP on my laptop. The files have access denied because of incorrect file permissions. I know how to change the permissions individually but as I have a few files of hundreds of change that is going to be a long tedious operation unless I change permissions in multiple files. IS THIS POSSIBLE?

  indydad wrote:
  > Thanks for the reply of Bruce. I tried your suggestion, but it doesn't
  > is to allow access to the files in the folder, but does not change the
  > permissions of the files in the folder. Any other suggestions would be most
  > Welcome.

  Yes, it will change the permissions of all files, more subfolders and
  /their/ content, when it is done properly. You choose Advanced >
  Change the permissions to the "replace all child object permissions.
  with permissions inheritable from this object"option?

  --

  Bruce Chambers

  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://support.Microsoft.com/default.aspx/KB/555375

  They who can give up liberty for a little temporary
  safety deserve neither liberty nor safety. ~ Benjamin Franklin

  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

  The philosopher never killed the priests, while the priest was
  has killed a large number of philosophers.
  ~ Denis Diderot