convert exe to vi
Can I convert .exe file .vi in LabVIEW... I want to know the solution to this...
Hello kunal,
No, this is not possible. I have someone creates an exe file, you cannot re-create a vi out of it.
One of the reasons is to record the programming interface code is copied.
It is also possible not recompile Code C and similar, for your information.
Concerning
Tags: NI Software
Similar Questions
-
Original title: could not open the file.
I received by e-mail a file which I can not open... so I downloaded the Microsoft compatibility pack. He asks me to double click the File Format Converter.exe file on my hard disk to start the Setup program. I'm not savvy and don't know where to find it! Your help will be admired. BF
Hello, I downloaded myself today and when I read your question, I went looking for him.
The only place where I found it was prefetch.
However, I was able to view the file after downloading.
When I download I always save it to the desktop, then the scanner and then double-click it to install. If you haven't noticed where it was installed, check your temp folder.
Or download it again and save it to the desktop.
I hope this helps.
-
error message sansa media converter.exe
I Player 4 GB Black sansa fuze when I use the sansa Media Converter it is an error message sansa media converter.exe windows vista is my software can someone please help me with this problem, I downloaded a video converter, but I still don't see the videos.
Toniajackson wrote:
I Player 4 GB Black sansa fuze when I use the sansa media converter is an error message sansa media converter.exe windows vista is my software can someone please help me with this problem, I downloaded a video converter, but I still don't see the videos.We need more information. Try the program again and write everything he's said in the message and post it back here.
-
Convert.exe has stopped working Vista
I'm running a program that converts any type of movie file extension, when it works normally... but at the moment it happens with convert.exe has stopped working... and it does the same thing with Divx Converter
Tests-
Go to the DivX icon or shortcut
Right click and select Properties
Select the Compatibility tab
Check run in compatibility mode and select Windows Vista Service Pack 2 (even if you are on Win 7) check her disable visual themes
Run as administratorBack up the registry before you do the following:
http://maketecheasier.com/backup-registry-in-Windows-7/2009/12/15
Start > type Regedit
Make sure this key:
HKEY_CURRENT_USER\Software\DivX\Settings\StreamEngine\DfxAutoEnable
Make sure its value is 1
Reboot and close registry
Need more help, try DivX support: http://www.divx.com/en/support
-
Convert.exe works with the portable USB drives?
Back when helping people spend 98 or ME to XP, there is a utility called convert.exe which could convert not destructive HDD FAT32 to NTFS.
This utility will work with a hard disk of laptop USB instead of an IDE drive? Some utilities are skittish about the material, and he did for years I've used this utility. I need to convert a portable hard drive 320 GB in NTFS for a virtual machine to run with VMware Player for a night school class, and I would rather not delete it if I have to.
SlickRCBDsalvation,
Yes, it is possible to convert the file system fat32 of NTFS for a USB hard drive.
Reference:
Convert a hard disk or partition to NTFS format
http://Windows.Microsoft.com/en-us/Windows-Vista/convert-a-hard-disk-or-partition-to-NTFS-formatWarning: formatting a volume will destroy all data on the partition. Be sure to back up any data you want to save before you begin.
Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Convert.exe does not work on Windows 7
Convert.exe
It works fine on windows xp but on my new Dell, it does not open.
Hans alsted
Convert.exe
There are likely hundreds or even thousands of small programs called ' convert, exe ", but I'm willing to bet that the one you have is a 16-bit application and you have Windows 64 bit installed on your new Dell printer.
Try to run 16-bit programs on a 64-bit Windows version will never work unless you install Windows Virtual PC (XP Mode aka) (for Windows 64 bit professional, ultimate and Enterprize) or an emmulator as DosBox to run the 16-bit subsystem for Windows 64 bit family versions.
- "Have you tried it turned off then on again? '-'The IT Crowd' Roy (Emmy award-winning British comedy)
-
Error converter.exe Sansa Media detailed please help!
OK, here is my not to my problem, I hope it's a detail enough.
1. I choose my copy youtube video
2. click on my anyvideo converter paste my video on the url box
3. click on the stuck
4. click on my profile for avi video. format
5. hang on convert
6. the finished video format
7. click on the sansa Media Converter
8. click on add multimedia elements
9. find my video file I want to add to my reader
10. click on the file
11. he paused after I click the then error media.exe sansa stopped working windows is to find a solution to the problem. Windows has closed the program and find a soultion.
I downloaded
1. direct x 9
2 k - lite codec pack basic
I also have the windows media player 11
My software is Windows vista
I can not load same sample videos to see this market help please, I hope that's enough detail
Will you have Rhapsody installed? I know you are trying to use the MSC, but this might work better. Install Rhapsody, don't subscribe to what it is, plug your rocket and use it to add video. There are also ways to use other programs to add to the player.
-
Dear all
How to convert DC DC pro.msi file pro.exe?
You should find the forum for any product it is and post your questions there.
Here is a link to a page that provides links to all of the Adobe forums...
The Forum links page: https://forums.adobe.com/welcome
-
convert the fla in exe in flash pro cc
How to convert exe fla files in flash pro cc to play on the other pc/mac window?
Hello
Export the fla to exe/dmg format is available in Flash CC 2014.
The export option projector Flash Pro CC 2014 option is available in menu commands. Try the commands > export under the spotlight.
For more information, please visit https://helpx.adobe.com/flash/using/exporting-projector-files.html
If you do not have Flash CC 2014 (build 14.0.0.110) please download and install the same from https://creative.adobe.com/products/download/flash
Thank you!
Mohan
-
Convert.exe will be able to convert NTFS to FAT32?
Monday, November 29, 2010, 11:43:34 + 0000, crazzydeveloper wrote:> I need to use the drive on a PS3...Windows has no capacity to do so. You need to get a third-partyprogram for her.Ken Blake (MS-MVP)
-
Please, I beg you. Help me.
Hi yogeshmeher01,Here are some links that you might find useful to solve this problem: -
Hello
Since my installation of Windows 2008 R2 (Web edition server) use the restore system 100 MB partition, I had to use this fix for this:
VMware KB: A Windows 2008 R2 machine P2V Conversion fails at 96%
to allow VMWare Converter (last 5.1) to also copy this partition but I never did because when I changed status od this partition to the online converter always stops on the connection to the machine Powered-> this local machine with the error "Unable to obtain material information for selected computer.". I noticed input error to the Windows Application event log that contains:
Name of the failing application: vmware - converter.exe, version: 8.1.0.15346, time stamp: 0 x 51642354
Name of the failed module: Converter - agent.dll, version: 8.1.0.15346, time stamp: 0 x 51642321
Exception code: 0xc0000005
Offset: 0x00084bbe
ID of the process failed: 0x19d4
Start time of application vulnerabilities: 0x01ce7402f38eeb43
The failing application path: C:\Program Files (x 86) \VMware\VMware vCenter Converter Standalone\vmware - converter.exe
Path of the failing module: C:\Program Files (x 86) \VMware\VMware vCenter Converter Standalone\converter - agent.dll
Report ID: 7d2c66a6-dff6-11e2-ab7e-000c29da83b7
There is also an entry of information:
The description for event ID 1 source vmware-converter-worker is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event is on another computer, the display information had to be saved with the event.
The following information has been included in the event:
VMware-converter-worker service started
When I reboot the system and not to make agent system Converter online 100 MB recovery partition does not hang and I can perform the conversion without this small partition.
Any ideas?
Concerning
Hello
I'm back with the log file. The log contains only the related situation this topic. Before you start the new operation of conversion, I have removed all previous logs.
Concerning
EDIT: I checked the file workers journal and information:
[PopulateVolumeProperties] \\?\Volume{90f40b30-30cd-11e2-849d-000c29da83b7}\ volume is the name of the \Device\HarddiskVolumeShadowCopy1 device.
MEM > 2013 - 07 - 07T 22: 40:47.140 + 02:00 [info 06288 'Default'] [GetDriveLetterOrMountPoint] Mount point of volume \\?\Volume{90f40b30-30cd-11e2-849d-000c29da83b7}\ is \\?\Volume{90f40b30-30cd-11e2-849d-000c29da83b7}\
MEM > 2013 - 07 - 07T 22: 40:50.881 + 02:00 [06288 panic "Default"] (recursion level Log 2) Win32 exception: Access Violation (0xc0000005)
showed me where is the problem. I managed diskshadow.exe and executed delete conceals the entire operation. Now I can go ahead with the conversion. Thank you
-
Converter problem - runtime error
Hello
I'm trying to install vmware converter 4.0.1 and I get the following error:
Microsoft Visual C++ Runtime Error: program:... vmware vcenter convertervmware - converter.exe. The application requested execution to terminate in an unusual way.
The server is Windows 2003. Everyone comes through this? Anyone know of a solution for this?
See you soon,.
P
Usually this error appears when the non-English Windows, as well as the Temp directory used converter has non-English characters. Take a look at Visual C ++ Runtime error or VMware Converter runtime error.
Otherwise, you need to check the prerequisites and watch newspapers converter.
-
VMware Converter standalone OR... I'M CONFUSSED! Help, please
Hello
I have the vmware converter plugin installed. What is this for? I can't find any documentation. The only documentation I can find is for the stand-alone version. Work together or what? Then the documentation still says to install the converter on the source machine and I understand not what converter, they're talking about. I want to do a cold cloning on my SQL servers. It's the standalone "VMware-converter - 4.0.1 - 161434.exe" and it's the VMware converter ' VMware - Converter.exe "I use the standalone version for a test of my Vista machine as a clone of good hot and has worked. But I do not understand the cold cloning process. Can someone point me to the documentation.
My environment is PE2950, ESXi 4.0 embedded, vCenter Server vSphere 4.0. I am cloning all standard W2K8 servers. Some SQL, domain controllers and servers of rest files. A Server Application.
Help!
Thank you
GEOBrasil
GEOBrasil,
I understand the confusion around the different products of converter. I hope that I can help you better understand which version is right for you. The reason for the different versions is based on what type of conversion you want to do, which are based on physical operating systems (Source) and your virtual environment (Target) is going to be.
Couple of warning or best practices:
-VMware recommends NO conversion P2V from DC. It is better to build NEW virtual machines for this.
-Hang your applications (SQL, WEb, etc.) before making a hot-clone (plug-in or standalone Enterprise)
First, for each platform VI3.x, VI4.x there are TWO business (plugin) version and a standalone version (Windows & Linux applications)
-VMware comparison chart gives an overview of the differences (http://www.vmware.com/products/converter/get.html)
Non-exhaustive summary below:
Enterprise Edition:
Pros: vCenter integration and automation, supports
Cons: you have to pay for it (you already have it if not the factor in your assessment. No 'multi-stage' conversion (i.e. 1 snapshot converter, deltas on a machine running are lost or migrated manually). No Linux support. Can't stand VI as a platform to target. Includes the CD "cold-clone".
Stand-alone Edition:
Benefits: support Linux. Supports the VMware Desktop products (workstation, Fusion, etc.) as target platforms. "Several steps" cloning, intial snapshot conversion as deltas. Source and target of service and the power of command for Windows.
Cons: Billable per-incident support. No automation, scheduling.
Cold-conversion
Benefits: no changes can occur on the source server. preserves the logical partitions. No service application comes into conflict with the local area. No installation on the source area
Disadvantages: Requires downtime for the source server. Requires the driver support for all devices on a physical to be present in BootCD (WinPE) Server
Hope this helps
-
Cannot install the converter integrated with VC
I had VC 2.5 U2 and I want to install the converter, but I get the following message when you try to go through the wizard.
"Please provide a signed for all required fields.
I have provided the IP address of the cross of Victoria, port (443), a local administrator username and password.
What else might I need to provide?
I run the Setup by using the CD of VC.
If you mount the cd vc on windows virtual center server. In the file converter, run vmware - converter.exe. There should be some balls contained in folder called vminst.log and vmceservermsi.log.
-KjB
Maybe you are looking for
-
I have a T3i. I dropped it the other day and it quit working. Any ideas on how I can get going again?
-
HP 1022nw, windows 7, 64 bit.
Unable to connect to the att wireless. I can make as much as the password window and start looking for the connection, but cannot go further. Setup stops. Loading latest drivers but no success
-
Win 7 - password connection not working-no CD drive
First I got the message that the user accounts were corrupt. Then, as if by magic, I got is more this message, instead he now does not recognize the password I had for my own account or for the administrator account. I have not forgotten them--they
-
I have a problem at the opening of the software as administrator, whenever I open a programm (programs that require admin privaleges) says "windows cannot find" C:/Program Files/.../program.exe". Make sure you typed the name correctly and then try ag
-
Normalize the tempo of a WAV file that slows down
I have a live recording of Jazz (WAV) in which tempo slows down after a few bars after the start.I want to normalize the entire file to the original tempo in BPM.How can I do?Thank you!