convert to upper case

Similar Questions

• convert to upper case in LOV

  Hello
  
  I have LOV with validation set to true.
  In case when LOV cannot validate the input I need to convert this entry at the top of CASE, while when I close the popup LOV and return to the basic page I have the string in the LOV domain letters.
  Anyone can, thanks to an idea, how to proceed?
  
  Thank you
  
  Anatoliy

  Anatoliy

  The link shared Anil sets the CSS only. This means a change in the user interface, so it will not save in capital letters in the database.

  To do this, you can write logic in vo/OT setters. You can use the toUpperCase() method in setters.

  I hope that helps!

  Thank you
  AJ

• Why don't the LOCKING of upper CASE indicator showing when the button?

  Why don't the LOCKING of upper CASE indicator showing when the button?

  A CapsLock indicator should be part of installation Win7 OS normal and here's why.  I use a brand new Microsoft Wireless Keyboard 2000 s/n 0356100416937.  I can send you a photo or the retail sales receipt if you doubt this statement.  It is there no CapsLock indicator on the keyboard itself, probably to extend the life of the battery.  I also use an IOGEAR KVM switch to facilitate the transition between multiple computers.  Emule KVM switch a keyboard of 102 standard keys, so even if I load the last Ko-driver (MS Intellitype 8.2) the pilot reports Microsoft keyboard not detected.  Therefore, there is no way to determine when the CapsLock key is active.  If you have ever tried to enter a long password upper-lower case with the CapsLock key in the wrong state, so you can imagine my frustration with this keyboard.

  So, how do you display CapsLock indicator?

  REMOTELY, HP TECHNICAL SUPPORT TOOK ME AND MY 520TOUCHSMART AS I HAD AN INDICATOR OF CAPS LOCK ON MY SCREEN, NOW HE IS GONE. I GAVE THEM MY MS OFFICE2010 CELA: NOW I FOUND SOMETHING ELSE. I LACK WILLINGNESS TO CONTACT OF COURSE FRIDAY. IF I FIND A SIMPLE SOLUTION TO MY PROBLEM, I'LL POST IT. SOMEONE HAS AN IDEA?

• Edit data in a column in the lower to upper case

  Hi guys, I was wondering if yous could help out me. I currently have a table in a database with a lot of data on it and one of the columns (column varchar2 and in the interest of this question lets assume the table is called my_table and my_column column) it contains data such as 'a3456', 'b8312', 'fg231' etc what I need to do is to convert all lowercase uppercase letters so that "a3456" now reads from "A3456" and "fg231" now read "FG231" and I was wondering what would be the best way to convert just all these lowercase letters to uppercase.
  
  Any help would be greatly appreciated.
  
  Thank you for taking the time to read this.

  update my_table set my_column = upper(my_column);
  

• Forcing upper case - Validation on the ground

  I saw a post about high case forcing only the name of the account or any other area of text but I still have a problem with the exact syntax. Did anyone had success by doing this? Any help would be apreciated... Thank you

  Hello

  Don't know what is the problem you are experiencing. The foregoing survey error even if we find a little character letter in the name of the account which means forces all uppercase. I guess that's what you're looking for

  -John CRMIT

• iPad Pro occasionally don't type the lowercase letters (the "space" remains stuck in upper case)

  What happens is I type something, in general, I accidentally hit the 'Shift' or something happens that otherwise made me decide to go back and change a letter to a lowercase letter, but after a BACKSPACE on a capitalized letter, I type a new letter, only that the new letter is now capitalized. So I back the thought of this letter I must have accidentally hit the 'Shift' key while typing again... I'm not. So I don't move the caps lock... no luck. It takes a return back a space behind the letter, I'm changing character before the character space will allow a lowercase to appear.

  This behavior started after upgrading to iOS 9.2 (and I use a Smart keyboard). I already checked and turned off "Auto-capitalisation" and "AutoCorrect". At this point, I can't think of another setting that could consistently produce this behavior. All the world experienced and/or sounds like a bug?

  Just an update so it doesn't matter which allows to diagnose a problem, this bug does not happen in mailboxes mailbox for these forums (such as the boxes provided to type your answers in), but it does in native applications.

• Photoshop Elements stuck in upper case, but in all caps is not selected on the keyboard

  I have no idea how this happened, but I can't come down all caps no matter what I use the font.

  If anyone can help, I would be very grateful. Please be as descriptive as possible. I'm not familiar with the terminology of Photoshop Elements.

  Thank you

  See if the text tool reset helps.

  With the type tool selected, click on the small arrow facing downwards and select Reset Tool.

  

• Upper case text

  Hi all

  When I try to add text to a picture in my photoshop elements, then it writes only in capital letters.

  I guess I could have pushed some botton somewhere, but I can't.

  Someone knows how to fix this?

  And before you think my caps is locked... then don't ;-)

  Greetings from Sweden

  Christina

  You could try a different font, as some policies are all capitals or reset

  the text tool by clicking on the small arrow facing downwards in the tool options

  bar, then choose Reset tool.

  For later use, there is a forum for photoshop elements:

  http://forums.Adobe.com/community/photoshop_elements

  

  MTSTUNER

• How can I make my text field automatically upper case?

  How can I make my text field in a form automatically uppercase?

  Use the following as custom hits JavaScript text field (select a Format type custom):

  Script from typo to text field

  Event.change = event.change.toUpperCase ();

• ADE and upper case style

  Hi all

  I use "text-transform: uppercase" in the template.css creating my ePub file.

  This appears correctly in caliber, but not in Digital Editions.

  Is there a css property alternative should I use instead?

  Thanks in advance,

  
  

  d.

  Yes is not being properly managed by ADE 1.7.2 or RMSDK 9.1 (the software used for devices).  I entered a bug, but I have no version information to share with you.

  Thank you for the report.

• VCenter vmotion error cross

  I tested successfully a script powerCLI for cross vCenter vmotion with two vCenters on the same domain of SINGLE sign-on, but I'm unable to operate with two vCenter servers that are not on the same domain of SINGLE sign-on.  The error "a specified parameter is not correct: ServiceLocator.instanceUuid.

  The hosts and vCenter servers running version 6.0.  The source that VC is running on windows and the remote works the linux device.  The script starts the task successfully, but the task fails immediately.  What log files should I look for more information or a stack trace?

  The original source of the script was written by William Lam (thanks!)

  (param

  [parameter] $vm_name.

  [parameter] $source_cluster.

  [parameter] $source_vcenter.

  [parameter] $target_cluster.

  [parameter] $target_vcenter.

  [parameter] $target_storage_pod.

  [parameter] $pools_to_move.

  [parameter] $folder

  )

  $sc_test_thumb = "XX".

  $thumbprint = $sc_test_thumb

  $source_vc = to connect-viserver $source_vcenter

  $source_cl = get-cluster-server $source_vc-name $source_cluster

  $source_pool = get-resourcepool-Server $source_vc-name $pools_to_move

  $target_vc = to connect-viserver $target_vcenter

  $target_cl = get-cluster-server $target_vc-name $target_cluster

  $target_hosts = get-vmhost-Server $target_vc-location $target_cl

  $target_pool = get-resourcepool-Server $target_vc-location $target_cl-name $pools_to_move

  $target_datastores = get-data-server store $target_vc-location $target_storage_pod

  $vm = get-vm-Server $source_vc-name $vm_name-location $source_pool

  $destFolder = get-file-server $target_vc-name $folder

  $rspec = new-Object VMware.Vim.VirtualMachineRelocateSpec

  $rspec.folder = $destFolder.id

  $rspec.datastore =.extensiondata.moref $target_datastores [0]

  $rspec.host =.extensiondata.moref $target_hosts [0]

  $rspec.pool = $target_pool.extensiondata.moref

  # New Locator service required for vCenter Server Destination when do not part of the same domain SSO

  $service = new-Object VMware.Vim.ServiceLocator

  $credential = new-Object VMware.Vim.ServiceLocatorNamePassword

  $credential.username = (get-VICredentialStoreItem-host $target_vcenter) .user

  $credential.password = (get-VICredentialStoreItem-host $target_vcenter) .password

  $service.credential = $credential

  $service. InstanceUuid = $target_vc. InstanceUuid

  $service.sslThumbprint = $thumbprint

  $service.url = ("https://"+ $target_vcenter)

  $rspec.service = $service

  $rspec.deviceChange = new-Object VMware.Vim.VirtualDeviceConfigSpec [] ($vm.networkadapters.count)

  $devices = $vm.extensiondata.Config.Hardware.Device

  $i = 0

  {foreach ($device to $devices)

  If ($device - is [VMware.Vim.VirtualEthernetCard]) {}

  $rspec.deviceChange [$i] = new-Object VMware.Vim.VirtualDeviceConfigSpec

  $rspec.deviceChange [$i]. Operation = "├editer."

  $rspec.deviceChange [$i]. Device = $device

  $nic = get-networkadapter - vm $vm - name $device. DeviceInfo.label

  $destPG = get-vdportgroup-Server $target_vc-name $nic.networkname

  $dvSwitchUuid = (get-View-Server $Id target_vc $destPG.extensiondata.Config.DistributedVirtualSwitch). Summary.Uuid

  $rspec.deviceChange [$i]. Device.Backing = New-Object VMware.Vim.VirtualEthernetCardDistributedVirtualPortBackingInfo

  $rspec.deviceChange [$i]. Device.Backing.Port = New-Object VMware.Vim.DistributedVirtualSwitchPortConnection

  $rspec.deviceChange [$i]. Device.Backing.Port.PortgroupKey = $destPG.key

  $rspec.deviceChange [$i]. Device.Backing.Port.SwitchUuid = $dvSwitchUuid

  $i ++

  }

  }

  Write-Host "' nMigrating $vm of $source_vc at $target_vc...". ' n »

  Question # Cross VC-vMotion

  $task = $vm.extensiondata.RelocateVM_Task ($rspec, "defaultPriority")

  Disconnect-VIServer $source_vc - force - confirm: $false

  Disconnect-VIServer $target_vc - force - confirm: $false

  return $task

  I found an error in the log vpxd.  The instanceUuid must be converted to upper case before he packed.

  Fixed this line:

  $service. InstanceUuid = $target_vc. InstanceUuid.toUpper)

  Thanks LucD!

• Capitalization in tabular form

  I work in APEX 4.0.
  
  I want to be able to define a column of tabular forms in capital letters. I can do this with javascript for the elements of the page, but I can't do the same for tabular columns forms. Please, if you know a way to do this, I would appreciate your help.

  Doug wrote:
  I work in APEX 4.0.

  I want to be able to define a column of tabular forms in capital letters. I can do this with javascript for the elements of the page, but I can't do the same for tabular columns forms. Please, if you know a way to do this, I would appreciate your help.

  This can be done easily by a dynamic action and a built-in JavaScript API.

  Create a dynamic action as follows:

  Event: Unlock key
  Selection type: JQuery selector
  Replace your internal column name attribute or name of f03 = "fxx", you can get this by inspecting one of your field column in chrome/firefox
  Jquery selector: input [name = "f03"]

  Add real Action as follows
  Action: Run the JavaScript Code
  It is generic and not need to change
  Code: $v_Upper (this.triggeringElement);

  Change the dynamic action now and define the scope of the event on +(this change is required so that this dynamic action will work for newly added rows) + live

  It is now, as soon as you type something in this column and release the button, the text will be converted to upper case

  Thank you
  Vikram

  Published by: VC on April 20, 2013 18:35

• Create the collection of query with bind variable

  Apex 4.0.2
  
  By Joel Re: Collection with variable binding the apex_collection.create_collection_from_query_b supports queries containing references to the bind variables (: P1_X) but I don't know how to use this feature, the documentation is not an example, just the API signature for the overloaded version has changed.
  
  If the query contains 2 bind session state variable references (: P1_X and: P1_Y), can someone please show an example of what to spend for the parameters p_names and p_values to the API?
  
  Thank you
  

  procedure create_collection_from_query_b(
      --
      -- Create a named collection from the supplied query using bulk operations.  The query will
      -- be parsed as the application owner.  If a collection exists with the same name for the current
      -- user in the same session for the current Flow ID, an application error will be raised.
      --
      -- This procedure uses bulk dynamic SQL to perform the fetch and insert operations into the named
      -- collection.  Two limitations are imposed by this procedure:
      --
      --   1) The MD5 checksum for the member data will not be computed
      --   2) No column value in query p_query can exceed 2,000 bytes
      --
      --
      -- Arguments:
      --     p_collection_name   =  Name of collection.  Maximum length can be
      --                            255 bytes.  Note that collection_names are case-insensitive,
      --                            as the collection name will be converted to upper case
      --     p_query             =  Query to be executed which will populate the members of the
      --                            collection.  If p_query is numeric, it is assumed to be
      --                            a DBMS_SQL cursor.
      -- example(s):
      --     l_query := 'select make, model, caliber from firearms';
      --     apex_collection.create_collection_from_query_b( p_collection_name => 'Firearm', p_query => l_query );
      --
      p_collection_name in varchar2,
      p_query           in varchar2,
      p_names           in wwv_flow_global.vc_arr2,
      p_values          in wwv_flow_global.vc_arr2,
      p_max_row_count   in number default null)
      ;

  HELEN wrote:
  Apex 4.0.2

  By Joel Re: Collection with variable binding the apex_collection.create_collection_from_query_b supports queries containing references to the bind variables (: P1_X) but I don't know how to use this feature, the documentation is not an example, just the API signature for the overloaded version has changed.

  If the query contains 2 bind session state variable references (: P1_X and: P1_Y), can someone please show an example of what to spend for the parameters p_names and p_values to the API?

  Not tried, but guess something like

  apex_collection.create_collection_from_query_b(
      p_collection_name => 'foobar'
    , p_query => 'select f.foo_id, b.bar_id, b.baz from foo f, bar b where f.foo_id = b.foo_id and f.x = to_number(:p1_x) and b.y = :p1_y'
    , p_names => apex_util.string_to_table('p1_x:p1_y')
    , p_values => apex_util.string_to_table(v('p1_x') || ':' || v('p1_y')))
  

• Collection of apex...

  I put the code below in the application process. Using Ajax I call this process and tried to throw and get the value of the book collection and display a field. but the value * "a."
  is not stored in p_c001.
  
  How to find if coding below runs in this process?
  
  Application process on request

  declare
  b varchar2(4000);
  begin
  IF APEX_COLLECTION.COLLECTION_EXISTS('BOOK') THEN
  APEX_COLLECTION.DELETE_COLLECTION('BOOK');
  END IF;
  apex_collection.create_collection(p_collection_name=>'book');
  apex_collection.add_member(
  p_collection_name=>'book',
  p_c001 => 'a');
  select c001 into b from apex_collections where collection_name='book';
  htp.prn(b);
  end;

  Global JavaScript-java and fuctional

  function get_id(){
  
  
  var get = new htmldb_Get(null,html_GetElement('pFlowId').value, 'APPLICATION_PROCESS=COL',0);
  
  
  var gReturn = get.get();
  
  document.getElementById('P2_ID').value = gReturn;
  
  }

  After that this error below process is back on the ground
  SQLERRM:ORA - 01403: no data found
  
  
  
  How to get the value of p_c001?
  
  Published by: skud on April 8, 2011 22:19
  
  Published by: skud on April 8, 2011 22:43

  Hello

  Write the name of the collection always in capital letters
  >
  Appellation collections

  When you create a collection, you must give it a name that cannot exceed 255 characters. Note that collection names are not case-sensitive, and will be converted to upper case.

  Once the collection is named, you can access the values in the collection by running a SQL query on the view APEX_COLLECTIONS.
  >
  http://download.Oracle.com/docs/CD/E17556_01/doc/apirefs.40/e15519/apex_collection.htm#BABBCHID

  DECLARE
    b VARCHAR2(4000);
  BEGIN
    IF APEX_COLLECTION.COLLECTION_EXISTS('BOOK') THEN
      APEX_COLLECTION.DELETE_COLLECTION('BOOK');
    END IF;
  
    apex_collection.create_collection(p_collection_name => 'BOOK');
  
    apex_collection.add_member(
      p_collection_name => 'BOOK',
      p_c001 => 'a'
    );
  
    SELECT c001
    INTO b
    FROM apex_collections
    WHERE collection_name = 'BOOK';
  
    htp.prn(b);
  
  END;
  

  Kind regards
  Jari

• How can I force for capital letters

  I create a form with Livecycle. I would like to convert lowercase to uppercase. How can I do?

  Hello

  Enter the following script to the output of the field event:

  // convert to upper case
  if (this.rawValue !== null)
  {
       this.rawValue = this.rawValue.toUpperCase();
  }
  

  Hope that helps,

  Niall

  Ensure the dynamics