copy is break to the next page and don't sink to the bottom of the text box

Similar Questions

• Automatically convert soft line breaks in the text box to hard breaks

  I have the design of textbooks and convert to ePub recomposable, broke up. These ePub files get formatted then can be used interchangeably on the printed text. A book that I am currently in conversion is a literature book where there are lines of text with the overall line numbers so that teachers can quickly refer to a specific section of the text.

  All the line breaks in the ID file are defined just by the edge of the text box. So the text box change sizes, all line breaks would also change. Isn't a problem until you need to keep these online breeze in recomposable text and add up the numbers in.

  
  What I'm looking for is a way to insert automatically the line breaks in these LONG sections of text in the right places. Does anyone have any ideas on how to do that?

  Thank you!

  Select a text box and run this script. He puts a soft return at the end of each line that doesn't have a carriage return. For more information on the installation and use of this script see http://indesignsecrets.com/how-to-install-a-script-in-indesign-that-you-found-in-a-forum-o r-blog - post.php .

  Written by Skemicle

  If (parseFloat (app.version)<>

  main();

  on the other

  app.doScript (principal, ScriptLanguage.JAVASCRIPT, undefined, UndoModes.ENTIRE_SCRIPT, "add end of line returns");

  main() {} function

  lines of the var = app.selection [0].parentStory.lines;

  for (i = 0; i<>

  If (rows [i] .characters [-1] .silence! = "\r") {}

  lines [i] .characters [-1] .silence = "\n";

  }

  }

  }

• Keep formatting then copy / paste it into the text box

  Hello world

  I use Adobe Acrobat XI v11.0.0 on Windows 7.

  When I copy and paste numbers and text in the same text, I lose the original formatting. How can I stick with formatting retained? For example, if I copy "BOLD"1234subscript , paste in the same text gives me Bold1234Subscript.

  However, formatting is preserved when I copy and paste the entire text box.
  

  Thank you very much!
  

  As far as I know that you can do. In any case, it seems you are trying to use Acrobat in a way that is not part of its design. Return to your document original edit that, and then create a new PDF.

• Browse through the pages and add the text box

  I'm trying to navigate through the pages of a document (to simplify, let's say there are 5 pages) and perform certain tasks (for simplicity, say add a text box) on each page.

  Using VBScript, my thoughts are something like:

  Define myPages = myDocument.Pages

  I have = 1

  do until I have 5 >

  myPages.Item (i). Select()

  Set myTextFrame = myDocument.ActivePage.TextFrames.Add

  myTextFrame.Contents = "Hello, World".

  i = i + 1

  loop

  
  

  should work.

  
  

  But the best I can do (when I'm not getting syntax error messages) is to get the written text several times on one page.

  
  

  I know that there is a simple solution that I'm missing.

  
  

  Any suggestions?

  
  

  Thank you.

  You should probably add () after adding

  P.

• What is this icon on my text box? It is the breaking copy in the text box.

  Can someone tell me what this little icon on the left side of the text box in the screenshot below? I tried to google it with no luck and I don't know what to do to turn it off then my text doesn't go haywire. I copied the text area of a document. INDD where the text has worked, then pasted into a document. Pre-existing INDD and when I go to move the text around the text box begins to align left, right and Center on its own.
  

  Looks like you pasted the frame on a master page. This icon appears on text blocks that reside on a Master.

  Not sure if the erratic behavior of alignment is however; Maybe something else on the page has wrapping applied... (?)

• Drag and drop the text box color - pages

  Hello

  I just upgraded from Pages 09 to 5.6 Pages. Pages 09, if I did drag a color from the menu of color on a text box, it might change the color of the text. 5.6 pages this action changes the fill of the text box, not the color of the text. Is it possible to force the behavior of 09 to 5.6? I change the color of the text much more often than the color of the background of the text box.

  Thank you very much!

  Force the behavior of Pages ' 09 v5.6? Absolutely not.

  Pages ' 09 and v5 are entirely different applications and not surprisingly, they work differently also. In the Pages v5, fill, text and a text box border color come from different parts of the application, not a central color palette.

• When I print a table (multiple pages) the text box under the table seems to be moving under the table and prints with the table of this overlap. My only solution is to push the text box further down the page before printing... Any advice?

  Im having problems shaped a text box so that my table does not print right on top of it. I want it inside of my table (it's 'tems and conditions' budget)

  Any advice would be great.

  I face the same problem as well. Would like to know if there is a better way to get the text box to move with the table instead of the effect that overlap. Have to manually adjust the layout, whenever I want to get a reasonable print of a document (or export it to PDF) seems counterintuitive, especially when it causes the document seem ill-disposed on screen.

  I am running version 3.6.2 of the numbers in the case where that matters.

• cannot delete the text box entry - break cp8

  I have two text input boxes and a button smartshape on a slide.

  Text entry areas require username, stores the responses into variables. The button moves to the next slide. I don't want the button to pause the slide, but not text entry areas.

  When I uncheck the 'pause after"in the properties of the input synchronization for each of the text boxes, the break is always carried out for each. In fact, icon pause shows still on the layer of the timeline for each as well.

  The result is that my slide stop 3 times instead of once:)

  It's Captivate 8, sensitive project.

  It is for some a bug in CP8, in previous versions you can change the time of the break, but you can disable it. Must be a design fault, using the same properties of timing for each interactive object to CP8 (to make it "clear").

  For me, it makes sense that you can't disable pause in BER, since it must wait for an input from the user. It's the same for question slides, no way to disable the pause, you can move only. For BER you can move with the synchronization properties, which is not yet the case for Question slides where you (still) that slide on the Timeline can move the point of interruption.

  Why should you get this button? If it is designed as a next button, do you want so that it can move without entries in of the TEB? Then set its action to 'go to the next slide", not to continue?

  Lilybiri

• get the data from the text box by clicking a button and display output text

  Hi all
  
  I have a task flow with two pages. On the first page, I have a text entry box and a command button.whenever I click the button, the data that is entered in the input text box should be displayed as output in the second page.please text after the code for this example.
  
  Thank you.

  Hello

  1. create a bean with a scope of application with any appropriate instance name: myBean_Request.
  2. create a property of the bean with any appropriate name. For example:

  private String textValue;
  

  3 generate the getters and setters in the bean for the text argument.
  4. set the value attribute of the text box to something like this.

  value="#{myBean_Request.textValue}"
  

  5. can insert setPropertyListener for the CommandButton as follows

  6. in the next page set the value of the text output to the

  value="#{pageFlowScope.textValue}"
  

  I hope this helps.

  Kind regards
  Sicard.

• Line or break line break in the text in the UserInterface WEB-Gallery

  How to insert a line break or a line break in the text in the WEB - Gallery UserInterface defined in 'galleryInfo.lrweb '.

  Example:

  
  

  Code:

  < pre >

  ToolTip = LOC ' $$$ / AgWPG/Templates/HTML/Panel/WarningIcons/RequiresLarge = change of Image Pages settings are not currently visible.»  Click in the image grid to move to a page of the image. «,

  < / pre >

  Output should be:

  Changes to the settings of the Image of Pages not currently visible.

  Click in the image grid to move to a page of the image.

  Ideas are welcome, thanks.

  \n is a newline and \r is a return to regular text strings.

  
  is a newline in HTML.

• line break in the TEXT Editor

  How to enter the line break in the TEXT Editor?

  --

  Thank you.

  There is an easy solution.

  If you want to use the Enter key, simply hold down the SHIFT key and the Smiley key become the Enter key.

  Alternatively, if you are a fan of the typing gesture, you have need only drop off shift at entrance to y to insert a new line.

  Hope that helps. Please acknowledge.

  Concerning

• Mobile side.  Using the drop down of your video.  I once put some text on the Mobile page the Menu drops down, but behind the image.  When I remove the text box the menu works correctly.  This also happens with a HTML code placed to Paypal.

  Mobile side.  Using the drop down of your video.  I once put some text on the Mobile page the Menu drops down, but behind the image.  When I remove the text box the menu works correctly.  This also happens with a HTML code placed to Paypal.

  Please check layers panel and put in place the menu item in the list, you can use the layers panel and move up or attempt to move the content.

  If there is still the same, then download a few screenshots of the design view.

  Thank you

  Sanjit

• Force a line break in the text of button?

  I'm sure I asked this before a few months ago, but what worked then is not working now.

  Dreamweaver CS 6: I have a menu bar button that contains text that needs two lines. The default line break is awkward. I want to break the line a word before where the default it breaks.

  Now, a few months ago, with a taskbar button previous menus that have had the same problem, I was told to enter the control + return in the window code and divide the text exactly where I wanted. (Note: I'm on a Mac, I don't speak a command.) I mean the control key.)

  What to do with this button and it forces a line break where I want in the code window, but the design window is not follow suit.

  So. How can I force a line break in the text of the button in design mode? I'm sure it's something simple. But what I thought I knew have apparently isn't what I want.

  How can I force a line break in the text of the button in design mode?

  Have you tried Shift + Enter?

  It works in Windows, so it might work on mac as well.

• CS2 erase content and the text box

  I use CS2 on Windows. I have a file of 30 pages with the linked text boxes on each page with anchored objects. I would remove the first 10 pages, but NOT the text of these areas of 10 text wrap on the remaining pages. Is there a way to delete the text boxes AND their content before deleting these pages, that I don't have to highlight all of the text on them, remove it, then delete the text boxes themselves?

  Thank you

  Lloyd

  Ah ha! You need a script! I use CS2 and I only found on the scripts - you can find them on the CD-ROM or get you it from here (scroll to CS2.) Put them in the folder scripts in your presets folder, open the palette scripts (on Windows) and here they are. There are two useful in your goal - we split the history in separate text boxes, one pops up a text box in the story. Just select your text box and double-click the script.

  (Of course, once you cut your text out of the herd area you can remove it).

• the text box changes color when you type in a google search and the cursor and the text becomes invisible.

  When I open Firefox, a cursor appears in the search text box, but I have to click on it before I can enter text. When I click on the text box changes color (from teal'c white to a light color) and the slider and I type text is invisible.

  Which may be caused by protection of typing"Comcast constant guard.

  'Configure the Anti-keylogger settings'-> disable

  • [874709/questions/874709]
  • [870165/questions/870165]