Copy to check the knowledge of the questions to the Quiz questions classified

Similar Questions

• I forgot to check the details proof box on the copy... process need to workaround

  We drove on our fiscal year via the copy of planning process (version 11.1.2.1). In a rush, I did the copy without checking the copy on the detailsboite of support.
  
  Users in the new budget have already made their adjustments to the budget so I can't restart the copy process (or can through the export of existing data, make the copy, and then re-import the new data?)
  
  Looking for ideas/thoughts on how to turnaround the supporting details.
  
  JTS

  How do you export the supporting details using LCM, you will need to filter the xml and then update it to point to the new POV and import. You need to make sure you filter all the detail information support that you are not interested from the XML.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• check the knowledge on success action

  I'm trying the slides in verification of knowledge. I have sanitation for incorrect actions, works perfectly. But action "to success" does not occur when I show the legend 'correctness '. When I deselect the 'Correct' legend, action (go to the next slide) works well. So my question is, how can I display the 'proper' legend for a few seconds AND then immediately move on to the next slide?

  I expected a little more up-to-date, as check knowledge slides are new in Captivate version 9. But the response of Rod gave a little help to keep experimenting.

  Here's what I ended up doing:

  On the Quiz properties for the slide, I put the action "on success" to go to the next slide. The right answer, I checked the advanced answer Option. For this action is to show an image I use for the correct feedback. This image is not visible in the output, and the calendar is set after the break for the submit question button and lasts 3 seconds so that it will show a significant amount of time.

  Wrong answers do not have the advanced answer option checked. I found that the bad just wouldn't work the same way. So instead, I made more changes to the properties of the Quiz slide.

  The number of attempts is 2, with the message try again checked and 1 error message. In the last attempt, he performs an advanced action that includes continues, show image (feedback wrong - this image has the same schedule as the correct image of feedback), image of correct feedback, jump to slide (for sanitation) Hide hide the wrong image (for future visits to the slide).

  With these settings, the program automatically advance to the next slide, after showing the correct feedback as I wanted when the user correctly answers the question. If the user answers the question wrong twice, he doesn't have to click to start the return of sanitation, but it is a compromise, I can live with.

• Just send a question to the support site that I can NOT connect on my email account after auto update of 38.3.0, cannot connect to my account to check the issue!

  I just posted a question on the last update automatic 38.3.0 it is possible to log into different e-mail accounts in a profile, only the first e-mail account. My support mozilla account is linked to one of the email accounts that I can NOT connect to. Can't connect to this email account to check the issue. Your last 38.3.0 Thunderbird is useless because it is no longer possible to log in different e-mail accounts in a profile, and your support solution is useless because you need to connect to the e-mail account to check the issue.
  How to proceed?

  You can change your email associated with your media profile.
  I have 38.3.0 and I can access all my email accounts I suggest you try the initial tests:

  Start T-bird with disabled modules.
  If it works on your module is to blame and you need to activate one by one.

  Start your operating system in safe mode with active network.
  If it works probably your antivirus is blocking or delaying. (Or driver).

• I used him copy / paste to add several checkboxes on my form, but now in preview mode when I check the first box it automatically checks all the boxes.  How can I stop this from happening?

  I used him copy / paste to add several checkboxes on my form, but now in preview mode when I check the first box it automatically checks all the boxes.  How can I stop this from happening?

  For later use, it happened because your fields have the same field name, and fields with the same name automatically have the same value.

  So all you had to do was so each had a unique name and it would have worked, but using the command create several fields is preferable because it renames the fields for rename you them.

• Check the code of a page in Adobe Muse (was: just a question...)

  I'm a newbie on Muse... and I have a simple question... can we check the code on a web page in Muse? If Yes, where and how can we do? Thks!

  The frequency will be the customer want / need to update or modify the set of records?

  If the set of archive is relatively static, Muse is probably a good choice. However, if the client expects to be able to update frequently, to reorganize and change all the elements contained in archive through a user interface of the browser without appeal to you, who use cases is not a good fit for Muse (of least not without with the help of a developer to create this system).

• How to check the existence of a value in a table before copying the data?

  Experts,
  
  I have a requirement in which I need to copy data (4 columns) table A to table B (4 columns)
  
  Table A (entry)
  
  PART_ID PART_NAME PART_OPT_CD ENGG_OPT_CD
  
  1 "AAA" 10 100
  2 'BBB' 20 200
  3 'CCC' 30 300
  4 'DDD' 40 400
  5 'EEE' 50 500
  
  
  I have a table named OPTIONS with a single column. This is a table of reference of business which has the master list of option codes.
  
  OPT_CD
  10
  20
  30
  50
  60
  100
  200
  400
  500
  
  
  I need to copy Table A to Table B, but in doing so, I need to check the values of columns 3 and 4 in the OPTIONS array.
  If there is copy the folder B. Otherwise error in the log in a file/table and continue with the next copy
  
  TABLE B (exit)
  
  PART_ID PART_NAME PART_OPT_CD ENGG_OPT_CD
  
  1 "AAA" 10 100
  2 'BBB' 20 200
  5 'EEE' 50 500
  
  WARNING file or a table should have the details below.
  
  300 ENGG_OPT_CD does not exist in the table OPTIONS, so part_id 3 have not migrated
  40 PART_OPT_CD does not exist in the table OPTIONS, then part_id 4 have not migrated
  
  Company don't bother about the format of error, we need this information to correct the OPT_CD in the OPTIONS table.
  
  Can anyone suggest a better way to do this. Thank you for your help in advance

  Hello

  Its very similar to your previous post.
  Re: PL/SQL help
  The only difference being that you have to outer join to your superimposed master table, since your search in two columns values occur only in a single column on your Master table.

  Something like that;

  create table a (part_id number, part_name varchar2(10),part_opt_cd number,engg_opt_cd number);
  
  insert into a
  (select 1 Part_ID, 'AAA' Part_Name, 10 Part_Opt_CD, 100 ENGG_Opt_CD from dual union all
  select 2, 'BBB', 20, 200 from dual union all
  select 3, 'CCC', 30, 300 from dual union all
  select 4, 'DDD', 40, 400 from dual union all
  select 5, 'EEE', 50, 500 from dual union all
  select 6, 'FFF', 60, 500 from dual
  )
  /
  
  create table b (part_id number, part_name varchar2(10),part_opt_cd number,engg_opt_cd number);
  
  insert into b
  (select 1 Part_ID, 'AAA' Part_Name, 10 Part_Opt_CD, 100 ENGG_Opt_CD from dual union all
  select 2, 'BBB', 20, 200 from dual union all
  select 5, 'EEE', 50, 500 from dual
  )
  /
  
  Create table master (OPT_CD number);
  
  insert into master (
  select 10 opt_cd from dual union all
  select 20 from dual union all
  select 30 from dual union all
  select 50 from dual union all
  select 60 from dual union all
  select 100 from dual union all
  select 200 from dual union all
  select 400 from dual union all
  select 500 from dual
  )
  /
  
  create table log_msg
  (msg varchar2(100)
  ,t timestamp default current_timestamp)
  / 
  
  SQL> insert all
    2    when Master1_ID is not null and
    3         Master2_ID is not null then
    4      into b (Part_ID, Part_Name, Part_Opt_CD, ENGG_Opt_CD)
    5      values (Part_ID, Part_Name, Part_Opt_CD, ENGG_Opt_CD)
    6    when Master1_ID is null or
    7         Master2_ID is null then
    8      into log_msg (msg) values (Part_Opt_CD || ' ' || ENGG_Opt_CD || ' does not exist on the Master table')
    9  select m1.Opt_CD      as Master1_ID
   10        ,m2.Opt_CD      as master2_ID
   11        ,a.Part_ID      as Part_ID
   12        ,a.Part_Name    as Part_Name
   13        ,a.Part_Opt_CD  as Part_Opt_CD
   14        ,a.ENGG_Opt_CD  as ENGG_Opt_CD
   15  from (
   16        select a.Part_ID, a.Part_Name, a.Part_Opt_CD, a.ENGG_Opt_CD
   17        from a
   18        left outer join b on  a.Part_ID = b.Part_ID
   19        where b.Part_ID is null
   20      ) a
   21  left outer join master m1 on   a.Part_Opt_CD = m1.Opt_CD
   22  left outer join master m2 on   a.ENGG_Opt_CD = m2.Opt_CD
   23  /
  
  3 rows created.
  
  SQL> select * from log_msg;
  
  MSG                                         T
  ------------------------------------------- -------------------------
  40 400 does not exist on the Master table   05-OCT-11 09.44.17.621000
  30 300 does not exist on the Master table   05-OCT-11 09.44.17.621000
  
  SQL> select * from b;
  
     PART_ID PART_NAME  PART_OPT_CD ENGG_OPT_CD
  ---------- ---------- ----------- -----------
           1 AAA                 10         100
           2 BBB                 20         200
           5 EEE                 50         500
           6 FFF                 60         500
  

  Note, I have included an additional line in table A in order to prove that the INSERTION will occur in table B. Errors, as you can see have been inserted in the table LOG_MSG.

  Published by: bluefrog October 5, 2011 09:48

• Check the spelling of Photoshop CC question 2015

  Hello team Adobe,

  I must say, I use photoshop for a long time now, practically, since you guys out of the software in one day, with each new version you added more in addition to features, performance improved and made better in terms of on UI / UX, however, you last "shtick" on the fate of check is by far the worst decision you've ever made!

  I have been waiting to show you the same engine of spell checking in Illustrator, so I won't need to run a spell check and wait half an hour while it checks the entire document... it's always annoying and all just wasted my time.

  So instead of the upgrade to Illustrator with the engine check great spell you always had in Photoshop, allowing to select a Word and have only this word or quote to check for misspellings, you did the opposite thing and introduced the full document of boring spell checking engine in Photoshop...

  I am seriously disappointed!

  My work in documents d ' assign cases are very large and may be text heavy and I don't like sitting there and wait while he checks the entire document and click ignore on hundreds of words that are technical in nature and are not recognized by the spell checking engine.

  Please get it fixed! Let us do our work faster and more efficient! and not wasting time on the entire document when all we have to sometimes check is a Word!

  People, if it exasperates you by this issue, say YES! so the Adobe team can see how many people wants this problem, so that they ignore their customers.

  Awaiting your response on this matter.

  Kind regards

  G. Yan

  OK, I feel stupid. I wrote this huge thing on this issue. I was in the same boat. I thought about it. Click on the text and then click on check spelling. Remember in previous versions would only spell of the point in witch you have started checking. Now, he checks it. Just click on the arrow and then go to edit.

• What does the option "copy photos to the photo library?

  I explore this now app Photos (worst name ever) and I wanted to import photos in Photos. The problem for me is I want to let the pictures where they already are. I'm not interested in a database or the system that hides the pictures of me in the finder. I want to be able to right click and reveal in finder - "export image" is a terrible choice.

  So, I see an option to check in the preferences. It reads: "Copy pictures to the photo library" but has no explanation as to what that means or does. This is what it will move my photos if I select copy? (their disappearance from the original file)? It will resume photos - clutter up my drive? If we make a copy and I update the original in Photoshop - it will reflect this change in the Photo?

  So many questions and I can not find an answer to any place. Even the help files had nothing that I could find.

  It reads: "Copy pictures to the photo library" but has no explanation as to what that means or does. This is what it will move my photos if I select copy? (their disappearance from the original file)? It will resume photos - clutter up my drive? If we make a copy and I update the original in Photoshop - it will reflect this change in the Photo?

  Default is 'Copy photos to the photo library' enabled.  Then the pictures will do exactly that. Any Photo that you import pictures is copied in the photo library and managed by pictures. You can remove the original outside the library after you have verified that it imported properly.

  If you disable the option, pictures reference the file in its original location and does not copy it.

  This configuration is not recommended because you have to manage photos on your own. If you delete photos of Photos, you must delete the original outside yourself. You cannot use iCloud photo library with referenced files and if dot nee restore you from a backup library will need films to another drive, you will need to manually reconnect all originals. It is subject to errors.

  If we make a copy and I update the original in Photoshop - it will reflect this change in the Photo?

  It will not work. Two Photos will ignore changes to Photosho or lose the connection to the original file. To use an external editor in pictures use extensions to change Photos photo editing panel. Let the pics to send the original to the external editor.

  This help page explains how the import options work:

  https://help.Apple.com/photos/Mac/1.0/?lang=en#/pht12e7a8015

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• Error code 80070490 while search/checking the Windows updates.

  IHaving tried to solve a recent problem that occurs with Windows Update (error Code 80070490) I read and try different things that have been suggested on this forum. It appears after trying the SFC, there are a few problems with the registry that cannot be resolved automatically. I tried the automatic Microsoft difficulty he 50202 but that does not solve it. I tried a system restore, but there is no restore point before the update I managed successfully to do (31 October 2009). So finally, I tried the repair facility that suggest the majority of people. I've had this laptop since February 2009, and Vista was preinstalled. I have the DVD of resettlement for Vista Home Premium 32 BIT and have not added anything about myself, but when I try to do the upgrade to install it says it is disabled and that he needs at least a current version or the more recent than the version I am running. I don't see how it can be less common because it is the version that I've been running for 9 months and the DVD that I was sent with the laptop. I am now on the ideas and suggestions...

  Fraser,
  Well restoring factory would correct any problems if they are strictly related to software.

  If you do a normal upgrade to Windows 7 and the problems you are currently experiencing are the question within the registry, then it is likely that they could remain after the upgrade.  Now, if you perform a Custom Installation upgrade press she will move to your current Windows directory to a new folder (Windows.old) and then it will install properly.  Of course, with this option, you will need to reinstall your applications.
  If you buy a copy of Windows 7 in another country just make sure that you get the correct language and that it is a valid copy.  (Also check the version of Windows.)  You shouldn't have any problems once you get back.  Here are some links with information about Windows 7 and upgrade considerations.

  I hope this helps.

  Windows 7 upgrade considerations

  Windows 7 Compatibility Center Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not!

  I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not! I also uninstalled and Reinstalled but I don't think that worked.

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)
  Mini092911 - 02.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 116
  BCP1: 9CEE7510
  BCP2: CA 8, 16700
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: ce621e4c-18c8-469e-8f97-42590f35c1d9

  AND:

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)
  WD-20110929-1029 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 117
  BCP1: 9CEE7510
  BCP2: CA 8, 16700
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: a59df662-85fc-45dd-a4b0-537bf6e212b3

  Hello

  Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) if the video device
  is integrated on the motherboard. Also check with Nvidia Support, their drivers and documentation online
  and ask in their forums known issues.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  -------------------------------------------------------------

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
  to reset the display driver and recover a time-out has failed.

  BCCode: 116 0 x 00000116<-- read="" this="" link="" read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  ----------------

  BCCode: 117 0 x 00000117

  Bug VIDEO_TDR_TIMEOUT_DETECTED control has a value of 0 x 00000117. This indicates that the display driver failed in a timely fashion.

  BCCode: 117 0 x 00000117<-- read="" this="">
  * 1276.html http://www.faultwire.com/solutions-fatal_error/the-Display-Driver-failed-to-Respond-in-timely-Fashion-0x00000117-

  1. update the video driver - also look for the BIOS and chipset of low level drivers at the manufacturer of system
  of (card mother manufacturer custom systems). Check with Nvidia Support and forums.

  2 are looking for Virus/Malware.

  3 check the hard disk for errors - run Checkdisk (see below)

  --------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all the)
  possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot copy and paste the content of an email from browser AOL9.5

  Windows 7 can not / not to highlight, or cut and paste using aol9.5 which is compatible with Windows 7. HP will not help me. Hope the forum will, like MS wants $49 to talk to me. New computer, about to come back and continue to use the old XP. Thank you.
  In an email, I can 'select all' and copy and paste, but if I want a part of this opportunity and send someone else, only 'PART' of this same mail via via cut and paste, it doesn't allow me to do.  I have included for the forum, my chat session with HP that has not helped me... He talked about IE and I'm not on IE, I use aol9.5. So thank you and hope someone can help me.  Here's the question/conversation.  Thanks for your time in advance.   Gail

  If I send you an email and then I want someone to send the same email, but with less content that what I sent you, cut and paste highlights the whole email and not just the portion I want to send to the other party. I have to use the delete button to make it work properly.  Below is the response from HP.

  [Monday, September 13, 2010 16:23]-Rajeev K says:
  I understand your concerns. In this case, I'm afraid to say because this content is available to the web browser in line, we can not able to perform the cut dough. If we need to send content limited from the particular email, in this case, you can copy paste the documents to any word in the document then right a new email and send the details according to your requirement.

  [Monday, September 13, 2010 16:23]-Gail Smaldone says:
  Hope you understand. Google says Windows 7 allow to cut and paste, and highlight the part of the sentence, it does not work.

  [Monday, September 13, 2010 16:25]-Gail Smaldone says:
  What you say makes no sense to me. I do a lot of extra work.

  [Monday, September 13, 2010 16:26]-Rajeev K says:
  Gail, the issue is not with Windows 7.

  [Monday, September 13, 2010 16:26]-Rajeev K says:
  It is because of Web browser that we use.

  [Monday, September 13, 2010 16:27]-Gail Smaldone says:
  It seems to be Windows 7, Rajeev. I can't yet highlight the cat above. The highlight will not stay up there for cut me and paste.

  [Monday, September 13, 2010 16:27]-Gail Smaldone says:
  I use aol 9.5 and sometimes internet explore. Currently, I'm on AOL9.5 which they say is compatible with Windows 7.

  [Monday, September 13, 2010 16:27]-Rajeev K says:
  Are you facing the same question with all formats?

  [Monday, September 13, 2010 16:28]-Gail Smaldone says:
  I have not tried on IE.
  [Monday, September 13, 2010 16:28]-Gail Smaldone says:
  
  I use aol 99% of the time
  [Monday, September 13, 2010 16:28]-Rajeev K says:
  Alright.

  [Monday, September 13, 2010 16:30]-Gail Smaldone says:
  What can we do to fix this, if it's not the fault of computers?

  [Monday, September 13, 2010 16:30]-Rajeev K says:
  Gail, from now on, we have no other option to change this.

  [Monday, September 13, 2010 16:31]-Gail Smaldone says:
  I can't use the computer Rajeev in this way, then.

  [Monday, September 13, 2010 16:31]-Gail Smaldone says:
  : () O

  [Monday, September 13, 2010 16:31]-Rajeev K says:
  I'm sorry for the inconvenience caused to you.

  [Monday, September 13, 2010 16:32]-Gail Smaldone says:
  You are able to talk to who it is created the Windows 7 operating system and see what can be done to make it compatible with aol9.5?

  Hi Gail,

  At this point, I suggest to launch Internet Explorer and check to see if you are able to copy and paste the content of the emails. If you are able to accomplish the task uisng Internet Explorer, it could be possible that some features of AOL9.5 do not work as expected, and you would like to get in touch with AOL, to solve the problem.

  Please visit the below mentioned link for help on AOL products:

  http://help.AOL.com/help/microsites/microsite.do

  Kind regards

  Gaurav Prakash - Microsoft Support

  
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot send an email - please check the e-mail address in your account properties

  I'm having a nightmare getting my live account works with outlook 2002 on Virgin Media. I can receive mail (which was never a problem) and after constantly fiddling with settings, I removed all errors except one.

  "Task (email) - sending and receiving ' reported an error (0x800CCC78):"unable to send the message. " Please check the e-mail address in your account properties.  The server responded:? ' »

  The e-mail address is the same in Outlook and living as it was copy and pasted (I did not trust my typing after 20 attempts!).
  I tried to follow the stuff in the links and forums and I'm not going anywhere.

  Pleeeeeeeease help me.

  Outlook:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Folder permissions in Windows 7 - a program that creates a file always has the authority to check the size of this file?

  Hello

  Where I work, we have a phone call, saving application that creates records of calls as .wav files.

  Before placing each record in long-term storage, the application creates a copy of the file (which is smaller) MP3 and then made a calculation of the free space to ensure that there is place in the long term for the newly created file storage.

  As part of the application must check the size of the MP3 file that he had just created and - I thought - calculation of space under Windows 7 that determination of the size of the file is sometimes a failure.

  (I think I understand, is that a .net function allows to determine the size of the file.)

  My query...

  If an application has sufficient privileges to create a file in a folder on the drive C: of the PC default also always have the right to determine the size of this file?

  Or are these two completely separate rights?

  For example, is it possible to have with no other rights granted write access?

  Thank you very much.

  The order of the questions, you asked:

  Yes

  Yes

  NO.

  It is indeed possible to give the file 'write' - access to the account, but not 'read' - access. However, even in this case the account can determine the size of the file.

  Log in under the account you are using for the conversion allows you to confirm my answers. To see the size of a file, use Windows Explorer or the Console command "dir".